From: Imre Kaloz Date: Tue, 26 May 2009 16:03:56 +0000 (+0000) Subject: fixup sibyte rtc support X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=504cde622910fd476941c47dec5e2e488998b116;p=librecmc%2Flibrecmc.git fixup sibyte rtc support SVN-Revision: 16094 --- diff --git a/target/linux/sibyte/config-default b/target/linux/sibyte/config-default index 2066504bf8..36aa3d1391 100644 --- a/target/linux/sibyte/config-default +++ b/target/linux/sibyte/config-default @@ -89,7 +89,11 @@ CONFIG_HW_RANDOM=m # CONFIG_HZ_100 is not set CONFIG_HZ=250 CONFIG_HZ_250=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C is not set +CONFIG_I2C_SIBYTE=y +CONFIG_I2C=y # CONFIG_IDE is not set # CONFIG_IEEE80211 is not set CONFIG_INITRAMFS_ROOT_GID=0 @@ -163,6 +167,10 @@ CONFIG_RESOURCES_64BIT=y # CONFIG_RFKILL is not set # CONFIG_RIO is not set # CONFIG_RISCOM8 is not set +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_M41T80_WDT is not set +CONFIG_RTC_DRV_M41T80=y CONFIG_SB1250_MAC=y # CONFIG_SB1_CERR_STALL is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set diff --git a/target/linux/sibyte/patches/003-m41t80_smbus.patch b/target/linux/sibyte/patches/003-m41t80_smbus.patch new file mode 100644 index 0000000000..c6a07c6d5b --- /dev/null +++ b/target/linux/sibyte/patches/003-m41t80_smbus.patch @@ -0,0 +1,367 @@ +--- a/drivers/rtc/rtc-m41t80.c ++++ b/drivers/rtc/rtc-m41t80.c +@@ -6,6 +6,7 @@ + * Based on m41t00.c by Mark A. Greer + * + * 2006 (c) mycable GmbH ++ * Copyright (c) 2008 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -38,6 +39,8 @@ + #define M41T80_REG_DAY 5 + #define M41T80_REG_MON 6 + #define M41T80_REG_YEAR 7 ++#define M41T80_REG_CONTROL 8 ++#define M41T80_REG_WATCHDOG 9 + #define M41T80_REG_ALARM_MON 0xa + #define M41T80_REG_ALARM_DAY 0xb + #define M41T80_REG_ALARM_HOUR 0xc +@@ -66,7 +69,7 @@ + #define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */ + #define M41T80_FEATURE_SQ_ALT (1 << 4) /* RSx bits are in reg 4 */ + +-#define DRV_VERSION "0.05" ++#define DRV_VERSION "0.06" + + static const struct i2c_device_id m41t80_id[] = { + { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT }, +@@ -88,31 +91,88 @@ struct m41t80_data { + struct rtc_device *rtc; + }; + +-static int m41t80_get_datetime(struct i2c_client *client, +- struct rtc_time *tm) ++ ++static int m41t80_write_block_data(struct i2c_client *client, ++ u8 reg, u8 num, u8 *buf) + { +- u8 buf[M41T80_DATETIME_REG_SIZE], dt_addr[1] = { M41T80_REG_SEC }; +- struct i2c_msg msgs[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1, +- .buf = dt_addr, +- }, +- { +- .addr = client->addr, +- .flags = I2C_M_RD, +- .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, +- .buf = buf + M41T80_REG_SEC, +- }, +- }; ++ int i, rc; + +- if (i2c_transfer(client->adapter, msgs, 2) < 0) { +- dev_err(&client->dev, "read error\n"); +- return -EIO; ++ if (i2c_check_functionality(client->adapter, ++ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { ++ i = i2c_smbus_write_i2c_block_data(client, reg, num, buf); ++ } else { ++ for (i = 0; i < num; i++) { ++ rc = i2c_smbus_write_byte_data(client, reg + i, ++ buf[i]); ++ if (rc < 0) { ++ i = rc; ++ goto out; ++ } ++ } + } ++out: ++ return i; ++} ++ ++static int m41t80_read_block_data(struct i2c_client *client, ++ u8 reg, u8 num, u8 *buf) ++{ ++ int i, rc; ++ ++ if (i2c_check_functionality(client->adapter, ++ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { ++ i = i2c_smbus_read_i2c_block_data(client, reg, num, buf); ++ } else { ++ for (i = 0; i < num; i++) { ++ rc = i2c_smbus_read_byte_data(client, reg + i); ++ if (rc < 0) { ++ i = rc; ++ goto out; ++ } ++ buf[i] = rc; ++ } ++ } ++out: ++ return i; ++} ++ ++static int m41t80_get_datetime(struct i2c_client *client, struct rtc_time *tm) ++{ ++ u8 buf[M41T80_DATETIME_REG_SIZE]; ++ int loops = 2; ++ int sec0, sec1; ++ ++ /* ++ * Time registers are latched by this chip if an I2C block ++ * transfer is used, but with SMBus-style byte accesses ++ * this is not the case, so check seconds for a wraparound. ++ */ ++ do { ++ if (m41t80_read_block_data(client, M41T80_REG_SEC, ++ M41T80_DATETIME_REG_SIZE - ++ M41T80_REG_SEC, ++ buf + M41T80_REG_SEC) < 0) { ++ dev_err(&client->dev, "read error\n"); ++ return -EIO; ++ } ++ if (i2c_check_functionality(client->adapter, ++ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { ++ sec1 = buf[M41T80_REG_SEC]; ++ break; ++ } ++ ++ sec0 = buf[M41T80_REG_SEC]; ++ sec1 = i2c_smbus_read_byte_data(client, M41T80_REG_SEC); ++ if (sec1 < 0) { ++ dev_err(&client->dev, "read error\n"); ++ return -EIO; ++ } ++ ++ sec0 = bcd2bin(sec0 & 0x7f); ++ sec1 = bcd2bin(sec1 & 0x7f); ++ } while (sec1 < sec0 && --loops); + +- tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f); ++ tm->tm_sec = sec1; + tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f); + tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f); + tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f); +@@ -127,39 +187,16 @@ static int m41t80_get_datetime(struct i2 + /* Sets the given date and time to the real time clock. */ + static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm) + { +- u8 wbuf[1 + M41T80_DATETIME_REG_SIZE]; +- u8 *buf = &wbuf[1]; +- u8 dt_addr[1] = { M41T80_REG_SEC }; +- struct i2c_msg msgs_in[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1, +- .buf = dt_addr, +- }, +- { +- .addr = client->addr, +- .flags = I2C_M_RD, +- .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, +- .buf = buf + M41T80_REG_SEC, +- }, +- }; +- struct i2c_msg msgs[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1 + M41T80_DATETIME_REG_SIZE, +- .buf = wbuf, +- }, +- }; ++ u8 buf[M41T80_DATETIME_REG_SIZE]; + + /* Read current reg values into buf[1..7] */ +- if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { ++ if (m41t80_read_block_data(client, M41T80_REG_SEC, ++ M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, ++ buf + M41T80_REG_SEC) < 0) { + dev_err(&client->dev, "read error\n"); + return -EIO; + } + +- wbuf[0] = 0; /* offset into rtc's regs */ + /* Merge time-data and register flags into buf[0..7] */ + buf[M41T80_REG_SSEC] = 0; + buf[M41T80_REG_SEC] = +@@ -177,7 +214,8 @@ static int m41t80_set_datetime(struct i2 + /* assume 20YY not 19YY */ + buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100); + +- if (i2c_transfer(client->adapter, msgs, 1) != 1) { ++ if (m41t80_write_block_data(client, M41T80_REG_SSEC, ++ M41T80_DATETIME_REG_SIZE, buf) < 0) { + dev_err(&client->dev, "write error\n"); + return -EIO; + } +@@ -251,34 +289,11 @@ err: + static int m41t80_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t) + { + struct i2c_client *client = to_i2c_client(dev); +- u8 wbuf[1 + M41T80_ALARM_REG_SIZE]; +- u8 *buf = &wbuf[1]; ++ u8 buf[M41T80_ALARM_REG_SIZE]; + u8 *reg = buf - M41T80_REG_ALARM_MON; +- u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; +- struct i2c_msg msgs_in[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1, +- .buf = dt_addr, +- }, +- { +- .addr = client->addr, +- .flags = I2C_M_RD, +- .len = M41T80_ALARM_REG_SIZE, +- .buf = buf, +- }, +- }; +- struct i2c_msg msgs[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1 + M41T80_ALARM_REG_SIZE, +- .buf = wbuf, +- }, +- }; + +- if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { ++ if (m41t80_read_block_data(client, M41T80_REG_ALARM_MON, ++ M41T80_ALARM_REG_SIZE, buf) < 0) { + dev_err(&client->dev, "read error\n"); + return -EIO; + } +@@ -288,7 +303,6 @@ static int m41t80_rtc_set_alarm(struct d + reg[M41T80_REG_ALARM_MIN] = 0; + reg[M41T80_REG_ALARM_SEC] = 0; + +- wbuf[0] = M41T80_REG_ALARM_MON; /* offset into rtc's regs */ + reg[M41T80_REG_ALARM_SEC] |= t->time.tm_sec >= 0 ? + bin2bcd(t->time.tm_sec) : 0x80; + reg[M41T80_REG_ALARM_MIN] |= t->time.tm_min >= 0 ? +@@ -302,7 +316,8 @@ static int m41t80_rtc_set_alarm(struct d + else + reg[M41T80_REG_ALARM_DAY] |= 0x40; + +- if (i2c_transfer(client->adapter, msgs, 1) != 1) { ++ if (m41t80_write_block_data(client, M41T80_REG_ALARM_MON, ++ M41T80_ALARM_REG_SIZE, buf) < 0) { + dev_err(&client->dev, "write error\n"); + return -EIO; + } +@@ -322,24 +337,10 @@ static int m41t80_rtc_read_alarm(struct + { + struct i2c_client *client = to_i2c_client(dev); + u8 buf[M41T80_ALARM_REG_SIZE + 1]; /* all alarm regs and flags */ +- u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; + u8 *reg = buf - M41T80_REG_ALARM_MON; +- struct i2c_msg msgs[] = { +- { +- .addr = client->addr, +- .flags = 0, +- .len = 1, +- .buf = dt_addr, +- }, +- { +- .addr = client->addr, +- .flags = I2C_M_RD, +- .len = M41T80_ALARM_REG_SIZE + 1, +- .buf = buf, +- }, +- }; + +- if (i2c_transfer(client->adapter, msgs, 2) < 0) { ++ if (m41t80_read_block_data(client, M41T80_REG_ALARM_MON, ++ M41T80_ALARM_REG_SIZE + 1, buf) < 0) { + dev_err(&client->dev, "read error\n"); + return -EIO; + } +@@ -512,26 +513,16 @@ static int boot_flag; + */ + static void wdt_ping(void) + { +- unsigned char i2c_data[2]; +- struct i2c_msg msgs1[1] = { +- { +- .addr = save_client->addr, +- .flags = 0, +- .len = 2, +- .buf = i2c_data, +- }, +- }; +- struct m41t80_data *clientdata = i2c_get_clientdata(save_client); ++ u8 wdt = 0x80; /* WDS = 1 (0x80) */ + +- i2c_data[0] = 0x09; /* watchdog register */ ++ struct m41t80_data *clientdata = i2c_get_clientdata(save_client); + + if (wdt_margin > 31) +- i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */ ++ /* mulitplier = WD_TIMO / 4, resolution = 4s (0x3) */ ++ wdt |= (wdt_margin & 0xfc) | 0x3; + else +- /* +- * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02) +- */ +- i2c_data[1] = wdt_margin<<2 | 0x82; ++ /* mulitplier = WD_TIMO, resolution = 1s (0x2) */ ++ wdt |= wdt_margin << 2 | 0x2; + + /* + * M41T65 has three bits for watchdog resolution. Don't set bit 7, as +@@ -540,7 +531,7 @@ static void wdt_ping(void) + if (clientdata->features & M41T80_FEATURE_WD) + i2c_data[1] &= ~M41T80_WATCHDOG_RB2; + +- i2c_transfer(save_client->adapter, msgs1, 1); ++ i2c_smbus_write_byte_data(save_client, M41T80_REG_WATCHDOG, wdt); + } + + /** +@@ -550,36 +541,8 @@ static void wdt_ping(void) + */ + static void wdt_disable(void) + { +- unsigned char i2c_data[2], i2c_buf[0x10]; +- struct i2c_msg msgs0[2] = { +- { +- .addr = save_client->addr, +- .flags = 0, +- .len = 1, +- .buf = i2c_data, +- }, +- { +- .addr = save_client->addr, +- .flags = I2C_M_RD, +- .len = 1, +- .buf = i2c_buf, +- }, +- }; +- struct i2c_msg msgs1[1] = { +- { +- .addr = save_client->addr, +- .flags = 0, +- .len = 2, +- .buf = i2c_data, +- }, +- }; +- +- i2c_data[0] = 0x09; +- i2c_transfer(save_client->adapter, msgs0, 2); +- +- i2c_data[0] = 0x09; +- i2c_data[1] = 0x00; +- i2c_transfer(save_client->adapter, msgs1, 1); ++ i2c_smbus_read_byte_data(save_client, M41T80_REG_WATCHDOG); ++ i2c_smbus_write_byte_data(save_client, M41T80_REG_WATCHDOG, 0); + } + + /** +@@ -772,8 +735,8 @@ static int m41t80_probe(struct i2c_clien + struct rtc_time tm; + struct m41t80_data *clientdata = NULL; + +- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C +- | I2C_FUNC_SMBUS_BYTE_DATA)) { ++ if (!i2c_check_functionality(client->adapter, ++ I2C_FUNC_SMBUS_BYTE_DATA)) { + rc = -ENODEV; + goto exit; + } diff --git a/target/linux/sibyte/patches/004-sibyte_rtc_cleanup.patch b/target/linux/sibyte/patches/004-sibyte_rtc_cleanup.patch new file mode 100644 index 0000000000..ca755f3e28 --- /dev/null +++ b/target/linux/sibyte/patches/004-sibyte_rtc_cleanup.patch @@ -0,0 +1,531 @@ +--- a/arch/mips/sibyte/swarm/Makefile ++++ b/arch/mips/sibyte/swarm/Makefile +@@ -1,4 +1,3 @@ +-obj-y := platform.o setup.o rtc_xicor1241.o \ +- rtc_m41t81.o ++obj-y := platform.o setup.o + + obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o +--- a/arch/mips/sibyte/swarm/rtc_m41t81.c ++++ /dev/null +@@ -1,233 +0,0 @@ +-/* +- * Copyright (C) 2000, 2001 Broadcom Corporation +- * +- * Copyright (C) 2002 MontaVista Software Inc. +- * Author: jsun@mvista.com or jsun@junsun.net +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- * +- */ +-#include +-#include +-#include +- +-#include +-#include +-#include +- +-#include +-#include +-#include +- +- +-/* M41T81 definitions */ +- +-/* +- * Register bits +- */ +- +-#define M41T81REG_SC_ST 0x80 /* stop bit */ +-#define M41T81REG_HR_CB 0x40 /* century bit */ +-#define M41T81REG_HR_CEB 0x80 /* century enable bit */ +-#define M41T81REG_CTL_S 0x20 /* sign bit */ +-#define M41T81REG_CTL_FT 0x40 /* frequency test bit */ +-#define M41T81REG_CTL_OUT 0x80 /* output level */ +-#define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */ +-#define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */ +-#define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */ +-#define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */ +-#define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */ +-#define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */ +-#define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */ +-#define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */ +-#define M41T81REG_AMO_SQWE 0x40 /* square wave enable */ +-#define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */ +-#define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */ +-#define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */ +-#define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */ +-#define M41T81REG_AHR_HT 0x40 /* halt update bit */ +-#define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */ +-#define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */ +-#define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */ +-#define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */ +-#define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */ +-#define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */ +-#define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */ +-#define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */ +- +- +-/* +- * Register numbers +- */ +- +-#define M41T81REG_TSC 0x00 /* tenths/hundredths of second */ +-#define M41T81REG_SC 0x01 /* seconds */ +-#define M41T81REG_MN 0x02 /* minute */ +-#define M41T81REG_HR 0x03 /* hour/century */ +-#define M41T81REG_DY 0x04 /* day of week */ +-#define M41T81REG_DT 0x05 /* date of month */ +-#define M41T81REG_MO 0x06 /* month */ +-#define M41T81REG_YR 0x07 /* year */ +-#define M41T81REG_CTL 0x08 /* control */ +-#define M41T81REG_WD 0x09 /* watchdog */ +-#define M41T81REG_AMO 0x0A /* alarm: month */ +-#define M41T81REG_ADT 0x0B /* alarm: date */ +-#define M41T81REG_AHR 0x0C /* alarm: hour */ +-#define M41T81REG_AMN 0x0D /* alarm: minute */ +-#define M41T81REG_ASC 0x0E /* alarm: second */ +-#define M41T81REG_FLG 0x0F /* flags */ +-#define M41T81REG_SQW 0x13 /* square wave register */ +- +-#define M41T81_CCR_ADDRESS 0x68 +- +-#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) +- +-static int m41t81_read(uint8_t addr) +-{ +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); +- __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { +- /* Clear error bit by writing a 1 */ +- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); +- return -1; +- } +- +- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); +-} +- +-static int m41t81_write(uint8_t addr, int b) +-{ +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); +- __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA)); +- __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { +- /* Clear error bit by writing a 1 */ +- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); +- return -1; +- } +- +- /* read the same byte again to make sure it is written */ +- __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- return 0; +-} +- +-int m41t81_set_time(unsigned long t) +-{ +- struct rtc_time tm; +- unsigned long flags; +- +- /* Note we don't care about the century */ +- rtc_time_to_tm(t, &tm); +- +- /* +- * Note the write order matters as it ensures the correctness. +- * When we write sec, 10th sec is clear. It is reasonable to +- * believe we should finish writing min within a second. +- */ +- +- spin_lock_irqsave(&rtc_lock, flags); +- tm.tm_sec = bin2bcd(tm.tm_sec); +- m41t81_write(M41T81REG_SC, tm.tm_sec); +- +- tm.tm_min = bin2bcd(tm.tm_min); +- m41t81_write(M41T81REG_MN, tm.tm_min); +- +- tm.tm_hour = bin2bcd(tm.tm_hour); +- tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0); +- m41t81_write(M41T81REG_HR, tm.tm_hour); +- +- /* tm_wday starts from 0 to 6 */ +- if (tm.tm_wday == 0) tm.tm_wday = 7; +- tm.tm_wday = bin2bcd(tm.tm_wday); +- m41t81_write(M41T81REG_DY, tm.tm_wday); +- +- tm.tm_mday = bin2bcd(tm.tm_mday); +- m41t81_write(M41T81REG_DT, tm.tm_mday); +- +- /* tm_mon starts from 0, *ick* */ +- tm.tm_mon ++; +- tm.tm_mon = bin2bcd(tm.tm_mon); +- m41t81_write(M41T81REG_MO, tm.tm_mon); +- +- /* we don't do century, everything is beyond 2000 */ +- tm.tm_year %= 100; +- tm.tm_year = bin2bcd(tm.tm_year); +- m41t81_write(M41T81REG_YR, tm.tm_year); +- spin_unlock_irqrestore(&rtc_lock, flags); +- +- return 0; +-} +- +-unsigned long m41t81_get_time(void) +-{ +- unsigned int year, mon, day, hour, min, sec; +- unsigned long flags; +- +- /* +- * min is valid if two reads of sec are the same. +- */ +- for (;;) { +- spin_lock_irqsave(&rtc_lock, flags); +- sec = m41t81_read(M41T81REG_SC); +- min = m41t81_read(M41T81REG_MN); +- if (sec == m41t81_read(M41T81REG_SC)) break; +- spin_unlock_irqrestore(&rtc_lock, flags); +- } +- hour = m41t81_read(M41T81REG_HR) & 0x3f; +- day = m41t81_read(M41T81REG_DT); +- mon = m41t81_read(M41T81REG_MO); +- year = m41t81_read(M41T81REG_YR); +- spin_unlock_irqrestore(&rtc_lock, flags); +- +- sec = bcd2bin(sec); +- min = bcd2bin(min); +- hour = bcd2bin(hour); +- day = bcd2bin(day); +- mon = bcd2bin(mon); +- year = bcd2bin(year); +- +- year += 2000; +- +- return mktime(year, mon, day, hour, min, sec); +-} +- +-int m41t81_probe(void) +-{ +- unsigned int tmp; +- +- /* enable chip if it is not enabled yet */ +- tmp = m41t81_read(M41T81REG_SC); +- m41t81_write(M41T81REG_SC, tmp & 0x7f); +- +- return (m41t81_read(M41T81REG_SC) != -1); +-} +--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c ++++ /dev/null +@@ -1,210 +0,0 @@ +-/* +- * Copyright (C) 2000, 2001 Broadcom Corporation +- * +- * Copyright (C) 2002 MontaVista Software Inc. +- * Author: jsun@mvista.com or jsun@junsun.net +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- */ +-#include +-#include +-#include +- +-#include +-#include +-#include +- +-#include +-#include +-#include +- +- +-/* Xicor 1241 definitions */ +- +-/* +- * Register bits +- */ +- +-#define X1241REG_SR_BAT 0x80 /* currently on battery power */ +-#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */ +-#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */ +-#define X1241REG_SR_RTCF 0x01 /* clock failed */ +-#define X1241REG_BL_BP2 0x80 /* block protect 2 */ +-#define X1241REG_BL_BP1 0x40 /* block protect 1 */ +-#define X1241REG_BL_BP0 0x20 /* block protect 0 */ +-#define X1241REG_BL_WD1 0x10 +-#define X1241REG_BL_WD0 0x08 +-#define X1241REG_HR_MIL 0x80 /* military time format */ +- +-/* +- * Register numbers +- */ +- +-#define X1241REG_BL 0x10 /* block protect bits */ +-#define X1241REG_INT 0x11 /* */ +-#define X1241REG_SC 0x30 /* Seconds */ +-#define X1241REG_MN 0x31 /* Minutes */ +-#define X1241REG_HR 0x32 /* Hours */ +-#define X1241REG_DT 0x33 /* Day of month */ +-#define X1241REG_MO 0x34 /* Month */ +-#define X1241REG_YR 0x35 /* Year */ +-#define X1241REG_DW 0x36 /* Day of Week */ +-#define X1241REG_Y2K 0x37 /* Year 2K */ +-#define X1241REG_SR 0x3F /* Status register */ +- +-#define X1241_CCR_ADDRESS 0x6F +- +-#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) +- +-static int xicor_read(uint8_t addr) +-{ +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); +- __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); +- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { +- /* Clear error bit by writing a 1 */ +- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); +- return -1; +- } +- +- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); +-} +- +-static int xicor_write(uint8_t addr, int b) +-{ +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); +- __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); +- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, +- SMB_CSR(R_SMB_START)); +- +- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) +- ; +- +- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { +- /* Clear error bit by writing a 1 */ +- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); +- return -1; +- } else { +- return 0; +- } +-} +- +-int xicor_set_time(unsigned long t) +-{ +- struct rtc_time tm; +- int tmp; +- unsigned long flags; +- +- rtc_time_to_tm(t, &tm); +- tm.tm_year += 1900; +- +- spin_lock_irqsave(&rtc_lock, flags); +- /* unlock writes to the CCR */ +- xicor_write(X1241REG_SR, X1241REG_SR_WEL); +- xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); +- +- /* trivial ones */ +- tm.tm_sec = bin2bcd(tm.tm_sec); +- xicor_write(X1241REG_SC, tm.tm_sec); +- +- tm.tm_min = bin2bcd(tm.tm_min); +- xicor_write(X1241REG_MN, tm.tm_min); +- +- tm.tm_mday = bin2bcd(tm.tm_mday); +- xicor_write(X1241REG_DT, tm.tm_mday); +- +- /* tm_mon starts from 0, *ick* */ +- tm.tm_mon ++; +- tm.tm_mon = bin2bcd(tm.tm_mon); +- xicor_write(X1241REG_MO, tm.tm_mon); +- +- /* year is split */ +- tmp = tm.tm_year / 100; +- tm.tm_year %= 100; +- xicor_write(X1241REG_YR, tm.tm_year); +- xicor_write(X1241REG_Y2K, tmp); +- +- /* hour is the most tricky one */ +- tmp = xicor_read(X1241REG_HR); +- if (tmp & X1241REG_HR_MIL) { +- /* 24 hour format */ +- tm.tm_hour = bin2bcd(tm.tm_hour); +- tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f); +- } else { +- /* 12 hour format, with 0x2 for pm */ +- tmp = tmp & ~0x3f; +- if (tm.tm_hour >= 12) { +- tmp |= 0x20; +- tm.tm_hour -= 12; +- } +- tm.tm_hour = bin2bcd(tm.tm_hour); +- tmp |= tm.tm_hour; +- } +- xicor_write(X1241REG_HR, tmp); +- +- xicor_write(X1241REG_SR, 0); +- spin_unlock_irqrestore(&rtc_lock, flags); +- +- return 0; +-} +- +-unsigned long xicor_get_time(void) +-{ +- unsigned int year, mon, day, hour, min, sec, y2k; +- unsigned long flags; +- +- spin_lock_irqsave(&rtc_lock, flags); +- sec = xicor_read(X1241REG_SC); +- min = xicor_read(X1241REG_MN); +- hour = xicor_read(X1241REG_HR); +- +- if (hour & X1241REG_HR_MIL) { +- hour &= 0x3f; +- } else { +- if (hour & 0x20) +- hour = (hour & 0xf) + 0x12; +- } +- +- day = xicor_read(X1241REG_DT); +- mon = xicor_read(X1241REG_MO); +- year = xicor_read(X1241REG_YR); +- y2k = xicor_read(X1241REG_Y2K); +- spin_unlock_irqrestore(&rtc_lock, flags); +- +- sec = bcd2bin(sec); +- min = bcd2bin(min); +- hour = bcd2bin(hour); +- day = bcd2bin(day); +- mon = bcd2bin(mon); +- year = bcd2bin(year); +- y2k = bcd2bin(y2k); +- +- year += (y2k * 100); +- +- return mktime(year, mon, day, hour, min, sec); +-} +- +-int xicor_probe(void) +-{ +- return (xicor_read(X1241REG_SC) != -1); +-} +--- a/arch/mips/sibyte/swarm/setup.c ++++ b/arch/mips/sibyte/swarm/setup.c +@@ -56,14 +56,6 @@ extern void sb1250_setup(void); + #error invalid SiByte board configuration + #endif + +-extern int xicor_probe(void); +-extern int xicor_set_time(unsigned long); +-extern unsigned long xicor_get_time(void); +- +-extern int m41t81_probe(void); +-extern int m41t81_set_time(unsigned long); +-extern unsigned long m41t81_get_time(void); +- + const char *get_system_type(void) + { + return "SiByte " SIBYTE_BOARD_NAME; +@@ -79,42 +71,14 @@ int swarm_be_handler(struct pt_regs *reg + return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL); + } + +-enum swarm_rtc_type { +- RTC_NONE, +- RTC_XICOR, +- RTC_M4LT81 +-}; +- +-enum swarm_rtc_type swarm_rtc_type; +- + unsigned long read_persistent_clock(void) + { +- switch (swarm_rtc_type) { +- case RTC_XICOR: +- return xicor_get_time(); +- +- case RTC_M4LT81: +- return m41t81_get_time(); +- +- case RTC_NONE: +- default: +- return mktime(2000, 1, 1, 0, 0, 0); +- } ++ return mktime(2000, 1, 1, 0, 0, 0); + } + + int rtc_mips_set_time(unsigned long sec) + { +- switch (swarm_rtc_type) { +- case RTC_XICOR: +- return xicor_set_time(sec); +- +- case RTC_M4LT81: +- return m41t81_set_time(sec); +- +- case RTC_NONE: +- default: +- return -1; +- } ++ return -1; + } + + void __init plat_mem_setup(void) +@@ -131,11 +95,6 @@ void __init plat_mem_setup(void) + + board_be_handler = swarm_be_handler; + +- if (xicor_probe()) +- swarm_rtc_type = RTC_XICOR; +- if (m41t81_probe()) +- swarm_rtc_type = RTC_M4LT81; +- + printk("This kernel optimized for " + #ifdef CONFIG_SIMULATION + "simulation"