From: Andy Polyakov <appro@openssl.org>
Date: Wed, 5 Oct 2011 17:03:44 +0000 (+0000)
Subject: e_padlock: add CTR mode.
X-Git-Tag: OpenSSL-fips-2_0-rc1~104
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=50452b2e60b0e967b03a32462c29750a99de5ffe;p=oweals%2Fopenssl.git

e_padlock: add CTR mode.
---

diff --git a/engines/asm/e_padlock-x86.pl b/engines/asm/e_padlock-x86.pl
index df8f56b521..61e91d889f 100644
--- a/engines/asm/e_padlock-x86.pl
+++ b/engines/asm/e_padlock-x86.pl
@@ -183,7 +183,7 @@ my ($mode,$opcode) = @_;
 &set_label("${mode}_pic_point");
 	&lea	($ctx,&DWP(16,$ctx));	# control word
 	&xor	("eax","eax");
-					if ($mode eq "ctr16") {
+					if ($mode eq "ctr32") {
 	&movq	("mm0",&QWP(-16,$ctx));	# load [upper part of] counter
 					} else {
 	&xor	("ebx","ebx");
@@ -216,7 +216,7 @@ my ($mode,$opcode) = @_;
 	&mov	(&DWP(8,"ebp"),$len);
 	&mov	($len,$chunk);
 	&mov	(&DWP(12,"ebp"),$chunk);	# chunk
-						if ($mode eq "ctr16") {
+						if ($mode eq "ctr32") {
 	&mov	("ecx",&DWP(-4,$ctx));
 	&xor	($out,$out);
 	&mov	("eax",&DWP(-8,$ctx));		# borrow $len
@@ -257,7 +257,7 @@ my ($mode,$opcode) = @_;
 						}
 	&mov	($out,&DWP(0,"ebp"));		# restore parameters
 	&mov	($chunk,&DWP(12,"ebp"));
-						if ($mode eq "ctr16") {
+						if ($mode eq "ctr32") {
 	&mov	($inp,&DWP(4,"ebp"));
 	&xor	($len,$len);
 &set_label("${mode}_xor");
@@ -284,7 +284,7 @@ my ($mode,$opcode) = @_;
 	&sub	($len,$chunk);
 	&mov	($chunk,$PADLOCK_CHUNK);
 	&jnz	(&label("${mode}_loop"));
-						if ($mode ne "ctr16") {
+						if ($mode ne "ctr32") {
 	&test	($out,0x0f);			# out_misaligned
 	&jz	(&label("${mode}_done"));
 						}
@@ -296,7 +296,7 @@ my ($mode,$opcode) = @_;
 	&data_byte(0xf3,0xab);			# rep stosl
 &set_label("${mode}_done");
 	&lea	("esp",&DWP(24,"ebp"));
-						if ($mode ne "ctr16") {
+						if ($mode ne "ctr32") {
 	&jmp	(&label("${mode}_exit"));
 
 &set_label("${mode}_aligned",16);
@@ -311,7 +311,7 @@ my ($mode,$opcode) = @_;
 &set_label("${mode}_exit");			}
 	&mov	("eax",1);
 	&lea	("esp",&DWP(4,"esp"));		# popf
-	&emms	()				if ($mode eq "ctr16");
+	&emms	()				if ($mode eq "ctr32");
 &set_label("${mode}_abort");
 &function_end("padlock_${mode}_encrypt");
 }
@@ -320,10 +320,11 @@ my ($mode,$opcode) = @_;
 &generate_mode("cbc",0xd0);
 &generate_mode("cfb",0xe0);
 &generate_mode("ofb",0xe8);
-&generate_mode("ctr16",0xc8);	# yes, it implements own ctr with ecb opcode,
-				# because hardware ctr was introduced later
-				# and even has errata on certain CPU stepping.
-				# own implementation *always* works...
+&generate_mode("ctr32",0xc8);	# yes, it implements own CTR with ECB opcode,
+				# because hardware CTR was introduced later
+				# and even has errata on certain C7 stepping.
+				# own implementation *always* works, though
+				# ~15% slower than dedicated hardware...
 
 &function_begin_B("padlock_xstore");
 	&push	("edi");
diff --git a/engines/asm/e_padlock-x86_64.pl b/engines/asm/e_padlock-x86_64.pl
index d5cc5fe00e..13c371be67 100644
--- a/engines/asm/e_padlock-x86_64.pl
+++ b/engines/asm/e_padlock-x86_64.pl
@@ -9,7 +9,8 @@
 
 # September 2011
 #
-# Assembler helpers for Padlock engine.
+# Assembler helpers for Padlock engine. See even e_padlock-x86.pl for
+# details.
 
 $flavour = shift;
 $output  = shift;
@@ -26,7 +27,7 @@ open STDOUT,"| $^X $xlate $flavour $output";
 
 $code=".text\n";
 
-$PADLOCK_CHUNK=512;	# Must be a power of 2 larger than 16
+$PADLOCK_CHUNK=512;	# Must be a power of 2 between 32 and 2^20
 
 $ctx="%rdx";
 $out="%rdi";
@@ -234,9 +235,23 @@ padlock_${mode}_encrypt:
 	neg	%rax
 	and	\$$PADLOCK_CHUNK-1,$chunk	# chunk%=PADLOCK_CHUNK
 	lea	(%rax,%rbp),%rsp
+___
+$code.=<<___				if ($mode eq "ctr32");
+	mov	-4($ctx),%eax		# pull 32-bit counter
+	bswap	%eax
+	neg	%eax
+	and	\$`$PADLOCK_CHUNK/16-1`,%eax
+	jz	.L${mode}_loop
+	shl	\$4,%eax
+	cmp	%rax,$len
+	cmova	%rax,$chunk		# don't let counter cross PADLOCK_CHUNK
+___
+$code.=<<___;
 	jmp	.L${mode}_loop
 .align	16
 .L${mode}_loop:
+	cmp	$len,$chunk		# ctr32 artefact
+	cmova	$len,$chunk		# ctr32 artefact
 	mov	$out,%r8		# save parameters
 	mov	$inp,%r9
 	mov	$len,%r10
@@ -261,6 +276,16 @@ $code.=<<___				if ($mode !~ /ecb|ctr/);
 	movdqa	(%rax),%xmm0
 	movdqa	%xmm0,-16($ctx)		# copy [or refresh] iv
 ___
+$code.=<<___				if ($mode eq "ctr32");
+	mov	-4($ctx),%eax		# pull 32-bit counter
+	test	\$0xffff0000,%eax
+	jnz	.L${mode}_no_corr
+	bswap	%eax
+	add	\$0x10000,%eax
+	bswap	%eax
+	mov	%eax,-4($ctx)
+.L${mode}_no_corr:
+___
 $code.=<<___;
 	mov	%r8,$out		# restore paramters
 	mov	%r11,$chunk
@@ -295,6 +320,29 @@ $code.=<<___;
 
 .align	16
 .L${mode}_aligned:
+___
+$code.=<<___				if ($mode eq "ctr32");
+	mov	-4($ctx),%eax		# pull 32-bit counter
+	mov	\$`16*0x10000`,$chunk
+	bswap	%eax
+	cmp	$len,$chunk
+	cmova	$len,$chunk
+	neg	%eax
+	and	\$0xffff,%eax
+	jz	.L${mode}_aligned_loop
+	shl	\$4,%eax
+	cmp	%rax,$len
+	cmova	%rax,$chunk		# don't let counter cross 2^16
+	jmp	.L${mode}_aligned_loop
+.align	16
+.L${mode}_aligned_loop:
+	cmp	$len,$chunk
+	cmova	$len,$chunk
+	mov	$len,%r10		# save parameters
+	mov	$chunk,$len
+	mov	$chunk,%r11
+___
+$code.=<<___;
 	lea	-16($ctx),%rax		# ivp
 	lea	16($ctx),%rbx		# key
 	shr	\$4,$len		# len/=AES_BLOCK_SIZE
@@ -304,6 +352,19 @@ $code.=<<___				if ($mode !~ /ecb|ctr/);
 	movdqa	(%rax),%xmm0
 	movdqa	%xmm0,-16($ctx)		# copy [or refresh] iv
 ___
+$code.=<<___				if ($mode eq "ctr32");
+	mov	-4($ctx),%eax		# pull 32-bit counter
+	bswap	%eax
+	add	\$0x10000,%eax
+	bswap	%eax
+	mov	%eax,-4($ctx)
+
+	mov	%r11,$chunk		# restore paramters
+	mov	%r10,$len
+	sub	$chunk,$len
+	mov	\$`16*0x10000`,$chunk
+	jnz	.L${mode}_aligned_loop
+___
 $code.=<<___;
 .L${mode}_exit:
 	mov	\$1,%eax
@@ -320,7 +381,7 @@ ___
 &generate_mode("cbc",0xd0);
 &generate_mode("cfb",0xe0);
 &generate_mode("ofb",0xe8);
-&generate_mode("ctr16",0xd8);
+&generate_mode("ctr32",0xd8);	# all 64-bit CPUs have working CTR...
 
 $code.=<<___;
 .asciz	"VIA Padlock x86_64 module, CRYPTOGAMS by <appro\@openssl.org>"
diff --git a/engines/e_padlock.c b/engines/e_padlock.c
index 7f78135165..a19f173536 100644
--- a/engines/e_padlock.c
+++ b/engines/e_padlock.c
@@ -76,6 +76,7 @@
 #endif
 #include <openssl/rand.h>
 #include <openssl/err.h>
+#include <openssl/modes.h>
 
 #ifndef OPENSSL_NO_HW
 #ifndef OPENSSL_NO_HW_PADLOCK
@@ -337,16 +338,19 @@ static int padlock_cipher_nids[] = {
 	NID_aes_128_cbc,
 	NID_aes_128_cfb,
 	NID_aes_128_ofb,
+	NID_aes_128_ctr,
 
 	NID_aes_192_ecb,
 	NID_aes_192_cbc,
 	NID_aes_192_cfb,
 	NID_aes_192_ofb,
+	NID_aes_192_ctr,
 
 	NID_aes_256_ecb,
 	NID_aes_256_cbc,
 	NID_aes_256_cfb,
 	NID_aes_256_ofb,
+	NID_aes_256_ctr
 };
 static int padlock_cipher_nids_num = (sizeof(padlock_cipher_nids)/
 				      sizeof(padlock_cipher_nids[0]));
@@ -505,10 +509,35 @@ padlock_ofb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
 	return 1;
 }
 
+static void padlock_ctr32_encrypt_glue(const unsigned char *in,
+			unsigned char *out, size_t blocks,
+			struct padlock_cipher_data *ctx,
+			const unsigned char *ivec)
+{
+	memcpy(ctx->iv,ivec,AES_BLOCK_SIZE);
+	padlock_ctr32_encrypt(out,in,ctx,AES_BLOCK_SIZE*blocks);
+}
+
+static int
+padlock_ctr_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
+		   const unsigned char *in_arg, size_t nbytes)
+{
+	struct padlock_cipher_data *cdata = ALIGNED_CIPHER_DATA(ctx);
+	unsigned int num = ctx->num;
+
+	CRYPTO_ctr128_encrypt_ctr32(in_arg,out_arg,nbytes,
+			cdata,ctx->iv,ctx->buf,&num,
+			(ctr128_f)padlock_ctr32_encrypt_glue);
+
+	ctx->num = (size_t)num;
+	return 1;
+}
+
 #define EVP_CIPHER_block_size_ECB	AES_BLOCK_SIZE
 #define EVP_CIPHER_block_size_CBC	AES_BLOCK_SIZE
 #define EVP_CIPHER_block_size_OFB	1
 #define EVP_CIPHER_block_size_CFB	1
+#define EVP_CIPHER_block_size_CTR	1
 
 /* Declaring so many ciphers by hand would be a pain.
    Instead introduce a bit of preprocessor magic :-) */
@@ -533,16 +562,19 @@ DECLARE_AES_EVP(128,ecb,ECB);
 DECLARE_AES_EVP(128,cbc,CBC);
 DECLARE_AES_EVP(128,cfb,CFB);
 DECLARE_AES_EVP(128,ofb,OFB);
+DECLARE_AES_EVP(128,ctr,CTR);
 
 DECLARE_AES_EVP(192,ecb,ECB);
 DECLARE_AES_EVP(192,cbc,CBC);
 DECLARE_AES_EVP(192,cfb,CFB);
 DECLARE_AES_EVP(192,ofb,OFB);
+DECLARE_AES_EVP(192,ctr,CTR);
 
 DECLARE_AES_EVP(256,ecb,ECB);
 DECLARE_AES_EVP(256,cbc,CBC);
 DECLARE_AES_EVP(256,cfb,CFB);
 DECLARE_AES_EVP(256,ofb,OFB);
+DECLARE_AES_EVP(256,ctr,CTR);
 
 static int
 padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid)
@@ -567,6 +599,9 @@ padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid
 	  case NID_aes_128_ofb:
 	    *cipher = &padlock_aes_128_ofb;
 	    break;
+	  case NID_aes_128_ctr:
+	    *cipher = &padlock_aes_128_ctr;
+	    break;
 
 	  case NID_aes_192_ecb:
 	    *cipher = &padlock_aes_192_ecb;
@@ -580,6 +615,9 @@ padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid
 	  case NID_aes_192_ofb:
 	    *cipher = &padlock_aes_192_ofb;
 	    break;
+	  case NID_aes_192_ctr:
+	    *cipher = &padlock_aes_192_ctr;
+	    break;
 
 	  case NID_aes_256_ecb:
 	    *cipher = &padlock_aes_256_ecb;
@@ -593,6 +631,9 @@ padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid
 	  case NID_aes_256_ofb:
 	    *cipher = &padlock_aes_256_ofb;
 	    break;
+	  case NID_aes_256_ctr:
+	    *cipher = &padlock_aes_256_ctr;
+	    break;
 
 	  default:
 	    /* Sorry, we don't support this NID */
@@ -610,6 +651,7 @@ padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key,
 {
 	struct padlock_cipher_data *cdata;
 	int key_len = EVP_CIPHER_CTX_key_length(ctx) * 8;
+	unsigned long mode = EVP_CIPHER_CTX_mode(ctx);
 
 	if (key==NULL) return 0;	/* ERROR */
 
@@ -617,7 +659,7 @@ padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key,
 	memset(cdata, 0, sizeof(struct padlock_cipher_data));
 
 	/* Prepare Control word. */
-	if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE)
+	if (mode == EVP_CIPH_OFB_MODE || mode == EVP_CIPH_CTR_MODE)
 		cdata->cword.b.encdec = 0;
 	else
 		cdata->cword.b.encdec = (ctx->encrypt == 0);
@@ -640,8 +682,8 @@ padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key,
 			   and is listed as hardware errata. They most
 			   likely will fix it at some point and then
 			   a check for stepping would be due here. */
-			if ((EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_ECB_MODE ||
-			     EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CBC_MODE)
+			if ((mode == EVP_CIPH_ECB_MODE ||
+			     mode == EVP_CIPH_CBC_MODE)
 			    && !enc)
 				AES_set_decrypt_key(key, key_len, &cdata->ks);
 			else