From: nynex Date: Tue, 5 May 2015 13:51:59 +0000 (+0000) Subject: Bumped ar71xx kernel version X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4ff66f07bd2f3fc5e8db073b2f86a4a51559733f;p=librecmc%2Flibrecmc-fossil.git Bumped ar71xx kernel version --- diff --git a/trunk/include/kernel-version.mk b/trunk/include/kernel-version.mk index 73a7a8e4..f28a650a 100644 --- a/trunk/include/kernel-version.mk +++ b/trunk/include/kernel-version.mk @@ -2,13 +2,11 @@ LINUX_RELEASE?=1 -LINUX_VERSION-3.10 = .58 -LINUX_VERSION-3.14 = .26 -LINUX_VERSION-3.18 = +LINUX_VERSION-3.18 = .11 +LINUX_VERSION-4.0 = -rc7 -LINUX_KERNEL_MD5SUM-3.10.58 = bca8cde0dddf27d980fe1d393ea743f7 -LINUX_KERNEL_MD5SUM-3.14.26 = 69b27733f335c557946edd58554debb7 -LINUX_KERNEL_MD5SUM-3.18 = 9e854df51ca3fef8bfe566dbd7b89241 +LINUX_KERNEL_MD5SUM-3.18.11 = d8bc6ff45cb4d40e731f4bd5c921f550 +LINUX_KERNEL_MD5SUM-4.0-rc7 = 26db663899b1a54397b4f184ca05f213 ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/trunk/target/linux/ar71xx/Makefile b/trunk/target/linux/ar71xx/Makefile index bb364141..d0f9df7b 100644 --- a/trunk/target/linux/ar71xx/Makefile +++ b/trunk/target/linux/ar71xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=mips16 CPU_TYPE=34kc SUBTARGETS:=generic luci nand mikrotik -KERNEL_PATCHVER:=3.14 +KERNEL_PATCHVER:=3.18 include $(INCLUDE_DIR)/target.mk diff --git a/trunk/target/linux/ar71xx/config-3.18 b/trunk/target/linux/ar71xx/config-3.18 new file mode 100644 index 00000000..1ee99f47 --- /dev/null +++ b/trunk/target/linux/ar71xx/config-3.18 @@ -0,0 +1,323 @@ +CONFIG_AG71XX=y +CONFIG_AG71XX_AR8216_SUPPORT=y +# CONFIG_AG71XX_DEBUG is not set +# CONFIG_AG71XX_DEBUG_FS is not set +CONFIG_AT803X_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_AR8216_PHY_LEDS=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ATH79=y +CONFIG_ATH79_DEV_AP9X_PCI=y +CONFIG_ATH79_DEV_DSA=y +CONFIG_ATH79_DEV_ETH=y +CONFIG_ATH79_DEV_GPIO_BUTTONS=y +CONFIG_ATH79_DEV_LEDS_GPIO=y +CONFIG_ATH79_DEV_M25P80=y +CONFIG_ATH79_DEV_NFC=y +CONFIG_ATH79_DEV_SPI=y +CONFIG_ATH79_DEV_USB=y +CONFIG_ATH79_DEV_WMAC=y +CONFIG_ATH79_MACH_ALFA_AP96=y +CONFIG_ATH79_MACH_ALFA_NX=y +CONFIG_ATH79_MACH_ALL0258N=y +CONFIG_ATH79_MACH_ALL0315N=y +CONFIG_ATH79_MACH_AP113=y +CONFIG_ATH79_MACH_AP121=y +CONFIG_ATH79_MACH_AP132=y +CONFIG_ATH79_MACH_AP136=y +CONFIG_ATH79_MACH_AP81=y +CONFIG_ATH79_MACH_AP83=y +CONFIG_ATH79_MACH_AP96=y +CONFIG_ATH79_MACH_ARCHER_C7=y +CONFIG_ATH79_MACH_AW_NR580=y +CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y +CONFIG_ATH79_MACH_CAP4200AG=y +CONFIG_ATH79_MACH_CARAMBOLA2=y +CONFIG_ATH79_MACH_CPE510=y +CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DGL_5500_A1=y +CONFIG_ATH79_MACH_DHP_1565_A1=y +CONFIG_ATH79_MACH_DIR_505_A1=y +CONFIG_ATH79_MACH_DIR_600_A1=y +CONFIG_ATH79_MACH_DIR_615_C1=y +CONFIG_ATH79_MACH_DIR_825_B1=y +CONFIG_ATH79_MACH_DIR_825_C1=y +CONFIG_ATH79_MACH_DRAGINO2=y +CONFIG_ATH79_MACH_EAP300V2=y +CONFIG_ATH79_MACH_EAP7660D=y +CONFIG_ATH79_MACH_EL_M150=y +CONFIG_ATH79_MACH_EL_MINI=y +CONFIG_ATH79_MACH_ESR1750=y +CONFIG_ATH79_MACH_ESR900=y +CONFIG_ATH79_MACH_EW_DORIN=y +CONFIG_ATH79_MACH_F9K1115V2=y +CONFIG_ATH79_MACH_GL_INET=y +CONFIG_ATH79_MACH_GS_OOLITE=y +CONFIG_ATH79_MACH_HIWIFI_HC6361=y +CONFIG_ATH79_MACH_HORNET_UB=y +CONFIG_ATH79_MACH_JA76PF=y +CONFIG_ATH79_MACH_JWAP003=y +CONFIG_ATH79_MACH_MC_MAC1200R=y +CONFIG_ATH79_MACH_MR600=y +CONFIG_ATH79_MACH_MR900=y +CONFIG_ATH79_MACH_MYNET_N600=y +CONFIG_ATH79_MACH_MYNET_N750=y +CONFIG_ATH79_MACH_MYNET_REXT=y +CONFIG_ATH79_MACH_MZK_W04NU=y +CONFIG_ATH79_MACH_MZK_W300NH=y +CONFIG_ATH79_MACH_NBG460N=y +CONFIG_ATH79_MACH_NBG6716=y +CONFIG_ATH79_MACH_OM2P=y +CONFIG_ATH79_MACH_OM5P=y +CONFIG_ATH79_MACH_PB42=y +CONFIG_ATH79_MACH_PB44=y +CONFIG_ATH79_MACH_PB92=y +CONFIG_ATH79_MACH_QIHOO_C301=y +CONFIG_ATH79_MACH_R6100=y +# CONFIG_ATH79_MACH_RB2011 is not set +# CONFIG_ATH79_MACH_RB4XX is not set +# CONFIG_ATH79_MACH_RB750 is not set +# CONFIG_ATH79_MACH_RB91X is not set +# CONFIG_ATH79_MACH_RB922 is not set +# CONFIG_ATH79_MACH_RB95X is not set +# CONFIG_ATH79_MACH_RBSXTLITE is not set +CONFIG_ATH79_MACH_RW2458N=y +CONFIG_ATH79_MACH_SMART_300=y +CONFIG_ATH79_MACH_TEW_632BRP=y +CONFIG_ATH79_MACH_TEW_673GRU=y +CONFIG_ATH79_MACH_TEW_712BR=y +CONFIG_ATH79_MACH_TEW_732BR=y +CONFIG_ATH79_MACH_TL_MR11U=y +CONFIG_ATH79_MACH_TL_MR13U=y +CONFIG_ATH79_MACH_TL_MR3020=y +CONFIG_ATH79_MACH_TL_MR3X20=y +CONFIG_ATH79_MACH_TL_WA701ND_V2=y +CONFIG_ATH79_MACH_TL_WA7210N_V2=y +CONFIG_ATH79_MACH_TL_WA830RE_V2=y +CONFIG_ATH79_MACH_TL_WA901ND=y +CONFIG_ATH79_MACH_TL_WA901ND_V2=y +CONFIG_ATH79_MACH_TL_WAX50RE=y +CONFIG_ATH79_MACH_TL_WDR3500=y +CONFIG_ATH79_MACH_TL_WDR4300=y +CONFIG_ATH79_MACH_TL_WR1041N_V2=y +CONFIG_ATH79_MACH_TL_WR1043ND=y +CONFIG_ATH79_MACH_TL_WR1043ND_V2=y +CONFIG_ATH79_MACH_TL_WR2543N=y +CONFIG_ATH79_MACH_TL_WR703N=y +CONFIG_ATH79_MACH_TL_WR720N_V3=y +CONFIG_ATH79_MACH_TL_WR741ND=y +CONFIG_ATH79_MACH_TL_WR741ND_V4=y +CONFIG_ATH79_MACH_TL_WR841N_V1=y +CONFIG_ATH79_MACH_TL_WR841N_V8=y +CONFIG_ATH79_MACH_TL_WR841N_V9=y +CONFIG_ATH79_MACH_TL_WR941ND=y +CONFIG_ATH79_MACH_TUBE2H=y +CONFIG_ATH79_MACH_UBNT=y +CONFIG_ATH79_MACH_UBNT_XM=y +CONFIG_ATH79_MACH_WHR_HP_G300N=y +CONFIG_ATH79_MACH_WLAE_AG300N=y +CONFIG_ATH79_MACH_WLR8100=y +CONFIG_ATH79_MACH_WNDAP360=y +CONFIG_ATH79_MACH_WNDR3700=y +CONFIG_ATH79_MACH_WNDR4300=y +CONFIG_ATH79_MACH_WNR2000=y +CONFIG_ATH79_MACH_WNR2000_V3=y +CONFIG_ATH79_MACH_WNR2000_V4=y +CONFIG_ATH79_MACH_WNR2200=y +CONFIG_ATH79_MACH_WP543=y +CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ558=y +CONFIG_ATH79_MACH_WRT160NL=y +CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WZR_450HP2=y +CONFIG_ATH79_MACH_WZR_HP_AG300H=y +CONFIG_ATH79_MACH_WZR_HP_G300NH=y +CONFIG_ATH79_MACH_WZR_HP_G300NH2=y +CONFIG_ATH79_MACH_WZR_HP_G450H=y +CONFIG_ATH79_MACH_ZCN_1523H=y +CONFIG_ATH79_NVRAM=y +CONFIG_ATH79_PCI_ATH9K_FIXUP=y +# CONFIG_ATH79_ROUTERBOOT is not set +CONFIG_ATH79_WDT=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +# CONFIG_GPIO_LATCH is not set +CONFIG_GPIO_NXP_74HC153=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_GPIO=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_IP17XX_PHY=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_WNDR3700_USB is not set +CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MICREL_PHY=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CYBERTAN_PARTS=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_LZMA_FW=y +CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_TPLINK_PARTS=y +CONFIG_MYLOADER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6063=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_NO_IOPORT_MAP is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_AR724X=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_AR933X=y +CONFIG_SERIAL_AR933X_CONSOLE=y +CONFIG_SERIAL_AR933X_NR_UARTS=2 +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_AR71XX=y +CONFIG_SOC_AR724X=y +CONFIG_SOC_AR913X=y +CONFIG_SOC_AR933X=y +CONFIG_SOC_AR934X=y +CONFIG_SOC_QCA953X=y +CONFIG_SOC_QCA955X=y +# CONFIG_SOC_QCA956X is not set +CONFIG_SPI=y +CONFIG_SPI_AP83=y +CONFIG_SPI_ATH79=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MASTER=y +# CONFIG_SPI_VSC7385 is not set +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB_SUPPORT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/trunk/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/trunk/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch new file mode 100644 index 00000000..79c7ab01 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch @@ -0,0 +1,42 @@ +From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001 +From: Markos Chandras +Date: Wed, 21 Aug 2013 11:47:22 +0100 +Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable + +Fixes the following build error: +arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used +uninitialized in this function [-Werror=maybe-uninitialized] +arch/mips/ath79/common.c:62:6: note: 'reg' was declared here +In file included from arch/mips/ath79/common.c:20:0: +arch/mips/ath79/common.c: In function 'ath79_device_reset_clear': +arch/mips/include/asm/mach-ath79/ath79.h:139:20: +error: 'reg' may be used uninitialized in this function +[-Werror=maybe-uninitialized] +arch/mips/ath79/common.c:90:6: note: 'reg' was declared here + +Signed-off-by: Markos Chandras +Acked-by: Gabor Juhos +--- + arch/mips/ath79/common.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -75,7 +75,7 @@ void ath79_device_reset_set(u32 mask) + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +- BUG(); ++ panic("Reset register not defined for this SOC"); + + spin_lock_irqsave(&ath79_device_reset_lock, flags); + t = ath79_reset_rr(reg); +@@ -103,7 +103,7 @@ void ath79_device_reset_clear(u32 mask) + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +- BUG(); ++ panic("Reset register not defined for this SOC"); + + spin_lock_irqsave(&ath79_device_reset_lock, flags); + t = ath79_reset_rr(reg); diff --git a/trunk/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/trunk/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch new file mode 100644 index 00000000..1d38986b --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch @@ -0,0 +1,301 @@ +From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Wed, 11 Jan 2012 22:25:11 +0100 +Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible + +Signed-off-by: Gabor Juhos +--- + arch/mips/ath79/mach-ap121.c | 6 ++ + arch/mips/ath79/mach-ap136.c | 6 ++ + arch/mips/ath79/mach-ap81.c | 6 ++ + arch/mips/ath79/mach-db120.c | 6 ++ + arch/mips/ath79/mach-pb44.c | 6 ++ + arch/mips/ath79/mach-ubnt-xm.c | 6 ++ + .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++- + drivers/spi/spi-ath79.c | 67 +++++++++++++------- + 8 files changed, 88 insertions(+), 23 deletions(-) + +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi + } + }; + ++static struct ath79_spi_controller_data ap121_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ap121_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l1606e", ++ .controller_data = &ap121_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-ap136.c ++++ b/arch/mips/ath79/mach-ap136.c +@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi + }, + }; + ++static struct ath79_spi_controller_data ap136_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ap136_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l6405d", ++ .controller_data = &ap136_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio + } + }; + ++static struct ath79_spi_controller_data ap81_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ap81_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .controller_data = &ap81_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi + }, + }; + ++static struct ath79_spi_controller_data db120_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info db120_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "s25sl064a", ++ .controller_data = &db120_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio + } + }; + ++static struct ath79_spi_controller_data pb44_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .controller_data = &pb44_spi0_data, + }, + }; + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + ++static struct ath79_spi_controller_data ubnt_xm_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ubnt_xm_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l6405d", ++ .controller_data = &ubnt_xm_spi0_data, + } + }; + +--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h ++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h +@@ -16,8 +16,14 @@ struct ath79_spi_platform_data { + unsigned num_chipselect; + }; + ++enum ath79_spi_cs_type { ++ ATH79_SPI_CS_TYPE_INTERNAL, ++ ATH79_SPI_CS_TYPE_GPIO, ++}; ++ + struct ath79_spi_controller_data { +- unsigned gpio; ++ enum ath79_spi_cs_type cs_type; ++ unsigned cs_line; + }; + + #endif /* _ATH79_SPI_PLATFORM_H */ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -33,6 +33,8 @@ + #define ATH79_SPI_RRW_DELAY_FACTOR 12000 + #define MHZ (1000 * 1000) + ++#define ATH79_SPI_CS_LINE_MAX 2 ++ + struct ath79_spi { + struct spi_bitbang bitbang; + u32 ioc_base; +@@ -67,6 +69,7 @@ static void ath79_spi_chipselect(struct + { + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; ++ struct ath79_spi_controller_data *cdata = spi->controller_data; + + if (is_active) { + /* set initial clock polarity */ +@@ -78,20 +81,24 @@ static void ath79_spi_chipselect(struct + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + +- if (spi->chip_select) { +- struct ath79_spi_controller_data *cdata = spi->controller_data; +- +- /* SPI is normally active-low */ +- gpio_set_value(cdata->gpio, cs_high); +- } else { ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: + if (cs_high) +- sp->ioc_base |= AR71XX_SPI_IOC_CS0; ++ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line); + else +- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; ++ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line); + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); +- } ++ break; + ++ case ATH79_SPI_CS_TYPE_GPIO: ++ /* SPI is normally active-low */ ++ if (gpio_cansleep(cdata->cs_line)) ++ gpio_set_value_cansleep(cdata->cs_line, cs_high); ++ else ++ gpio_set_value(cdata->cs_line, cs_high); ++ break; ++ } + } + + static void ath79_spi_enable(struct ath79_spi *sp) +@@ -118,24 +125,30 @@ static void ath79_spi_disable(struct ath + static int ath79_spi_setup_cs(struct spi_device *spi) + { + struct ath79_spi_controller_data *cdata; ++ unsigned long flags; + int status; + + cdata = spi->controller_data; +- if (spi->chip_select && !cdata) ++ if (!cdata) + return -EINVAL; + + status = 0; +- if (spi->chip_select) { +- unsigned long flags; ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: ++ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX) ++ status = -EINVAL; ++ break; + ++ case ATH79_SPI_CS_TYPE_GPIO: + flags = GPIOF_DIR_OUT; + if (spi->mode & SPI_CS_HIGH) + flags |= GPIOF_INIT_LOW; + else + flags |= GPIOF_INIT_HIGH; + +- status = gpio_request_one(cdata->gpio, flags, ++ status = gpio_request_one(cdata->cs_line, flags, + dev_name(&spi->dev)); ++ break; + } + + return status; +@@ -143,9 +156,19 @@ static int ath79_spi_setup_cs(struct spi + + static void ath79_spi_cleanup_cs(struct spi_device *spi) + { +- if (spi->chip_select) { +- struct ath79_spi_controller_data *cdata = spi->controller_data; +- gpio_free(cdata->gpio); ++ struct ath79_spi_controller_data *cdata; ++ ++ cdata = spi->controller_data; ++ if (!cdata) ++ return; ++ ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: ++ /* nothing to do */ ++ break; ++ case ATH79_SPI_CS_TYPE_GPIO: ++ gpio_free(cdata->cs_line); ++ break; + } + } + +@@ -210,6 +233,10 @@ static int ath79_spi_probe(struct platfo + unsigned long rate; + int ret; + ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -EINVAL; ++ + master = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (master == NULL) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); +@@ -219,15 +246,11 @@ static int ath79_spi_probe(struct platfo + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + +- pdata = dev_get_platdata(&pdev->dev); +- + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; +- if (pdata) { +- master->bus_num = pdata->bus_num; +- master->num_chipselect = pdata->num_chipselect; +- } ++ master->bus_num = pdata->bus_num; ++ master->num_chipselect = pdata->num_chipselect; + + sp->bitbang.master = master; + sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/trunk/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch b/trunk/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch new file mode 100644 index 00000000..e0821a77 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi + + static int ar933x_wmac_reset(void) + { ++ int retries = 20; ++ + ath79_device_reset_set(AR933X_RESET_WMAC); + ath79_device_reset_clear(AR933X_RESET_WMAC); + +- return 0; ++ while (1) { ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) ++ return 0; ++ ++ if (retries-- == 0) ++ break; ++ ++ udelay(10000); ++ retries++; ++ } ++ ++ pr_err("ar933x: WMAC reset timed out"); ++ return -ETIMEDOUT; + } + + static int ar933x_r1_get_wmac_revision(void) diff --git a/trunk/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch b/trunk/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch new file mode 100644 index 00000000..d925f926 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch @@ -0,0 +1,28 @@ +--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h ++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +@@ -36,6 +36,7 @@ + #define cpu_has_mdmx 0 + #define cpu_has_mips3d 0 + #define cpu_has_smartmips 0 ++#define cpu_has_rixi 0 + + #define cpu_has_mips32r1 1 + #define cpu_has_mips32r2 1 +@@ -43,6 +44,7 @@ + #define cpu_has_mips64r2 0 + + #define cpu_has_mipsmt 0 ++#define cpu_has_userlocal 0 + + #define cpu_has_64bits 0 + #define cpu_has_64bit_zero_reg 0 +@@ -51,5 +53,9 @@ + + #define cpu_dcache_line_size() 32 + #define cpu_icache_line_size() 32 ++#define cpu_has_vtag_icache 0 ++#define cpu_has_dc_aliases 1 ++#define cpu_has_ic_fills_f_dc 0 ++#define cpu_has_pindexed_dcache 0 + + #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/trunk/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch new file mode 100644 index 00000000..0bc64b7a --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/include/asm/mips_machine.h ++++ b/arch/mips/include/asm/mips_machine.h +@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty + .mach_setup = _setup, \ + }; + ++#define MIPS_MACHINE_NONAME(_type, _id, _setup) \ ++static const char machine_id_##_type[] __initconst \ ++ __aligned(1) = _id; \ ++static struct mips_machine machine_##_type \ ++ __used __section(.mips.machines.init) = \ ++{ \ ++ .mach_type = _type, \ ++ .mach_id = machine_id_##_type, \ ++ .mach_name = NULL, \ ++ .mach_setup = _setup, \ ++}; ++ + extern long __mips_machines_start; + extern long __mips_machines_end; + diff --git a/trunk/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch b/trunk/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch new file mode 100644 index 00000000..171dbcfb --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch @@ -0,0 +1,124 @@ +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -233,6 +233,9 @@ config LZMA_COMPRESS + config LZMA_DECOMPRESS + tristate + ++config RLE_DECOMPRESS ++ tristate ++ + # + # These all provide a common interface (hence the apparent duplication with + # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -97,6 +97,7 @@ obj-$(CONFIG_XZ_DEC) += xz/ + obj-$(CONFIG_RAID6_PQ) += raid6/ + obj-$(CONFIG_LZMA_COMPRESS) += lzma/ + obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ ++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o + + lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o + lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +--- /dev/null ++++ b/include/linux/rle.h +@@ -0,0 +1,18 @@ ++#ifndef _RLE_H_ ++#define _RLE_H_ ++ ++#ifdef CONFIG_RLE_DECOMPRESS ++int rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done); ++#else ++static inline int ++rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done) ++{ ++ return -ENOTSUPP; ++} ++#endif /* CONFIG_RLE_DECOMPRESS */ ++ ++#endif /* _RLE_H_ */ +--- /dev/null ++++ b/lib/rle.c +@@ -0,0 +1,78 @@ ++/* ++ * RLE decoding routine ++ * ++ * Copyright (C) 2012 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++ ++int rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done) ++{ ++ size_t srcpos, dstpos; ++ int ret; ++ ++ srcpos = 0; ++ dstpos = 0; ++ ret = -EINVAL; ++ ++ /* sanity checks */ ++ if (!src || !srclen || !dst || !dstlen) ++ goto out; ++ ++ while (1) { ++ char count; ++ ++ if (srcpos >= srclen) ++ break; ++ ++ count = (char) src[srcpos++]; ++ if (count == 0) { ++ ret = 0; ++ break; ++ } ++ ++ if (count > 0) { ++ unsigned char c; ++ ++ if (srcpos >= srclen) ++ break; ++ ++ c = src[srcpos++]; ++ ++ while (count--) { ++ if (dstpos >= dstlen) ++ break; ++ ++ dst[dstpos++] = c; ++ } ++ } else { ++ count *= -1; ++ ++ while (count--) { ++ if (srcpos >= srclen) ++ break; ++ if (dstpos >= dstlen) ++ break; ++ dst[dstpos++] = src[srcpos++]; ++ } ++ } ++ } ++ ++out: ++ if (src_done) ++ *src_done = srcpos; ++ if (dst_done) ++ *dst_done = dstpos; ++ ++ return ret; ++} ++ ++EXPORT_SYMBOL_GPL(rle_decode); diff --git a/trunk/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch b/trunk/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch new file mode 100644 index 00000000..db7b3ca8 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch @@ -0,0 +1,94 @@ +--- a/drivers/mtd/maps/physmap.c ++++ b/drivers/mtd/maps/physmap.c +@@ -31,6 +31,66 @@ struct physmap_flash_info { + int vpp_refcnt; + }; + ++static struct platform_device *physmap_map2pdev(struct map_info *map) ++{ ++ return (struct platform_device *) map->map_priv_1; ++} ++ ++static void physmap_lock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->lock(pdev); ++} ++ ++static void physmap_unlock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->unlock(pdev); ++} ++ ++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) ++{ ++ map_word ret; ++ ++ physmap_lock(map); ++ ret = inline_map_read(map, ofs); ++ physmap_unlock(map); ++ ++ return ret; ++} ++ ++static void physmap_flash_write_lock(struct map_info *map, map_word d, ++ unsigned long ofs) ++{ ++ physmap_lock(map); ++ inline_map_write(map, d, ofs); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_from_lock(struct map_info *map, void *to, ++ unsigned long from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_from(map, to, from, len); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, ++ const void *from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_to(map, to, from, len); ++ physmap_unlock(map); ++} ++ + static int physmap_flash_remove(struct platform_device *dev) + { + struct physmap_flash_info *info; +@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl + + simple_map_init(&info->map[i]); + ++ if (physmap_data->lock && physmap_data->unlock) { ++ info->map[i].read = physmap_flash_read_lock; ++ info->map[i].write = physmap_flash_write_lock; ++ info->map[i].copy_from = physmap_flash_copy_from_lock; ++ info->map[i].copy_to = physmap_flash_copy_to_lock; ++ } ++ + probe_type = rom_probe_types; + if (physmap_data->probe_type == NULL) { + for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) +--- a/include/linux/mtd/physmap.h ++++ b/include/linux/mtd/physmap.h +@@ -25,6 +25,8 @@ struct physmap_flash_data { + unsigned int width; + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); ++ void (*lock)(struct platform_device *); ++ void (*unlock)(struct platform_device *); + void (*set_vpp)(struct platform_device *, int); + unsigned int nr_parts; + unsigned int pfow_base; diff --git a/trunk/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch b/trunk/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch new file mode 100644 index 00000000..0d483ab1 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch @@ -0,0 +1,29 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -148,6 +148,7 @@ + #define SST39LF160 0x2782 + #define SST39VF1601 0x234b + #define SST39VF3201 0x235b ++#define SST39VF6401B 0x236d + #define SST39WF1601 0x274b + #define SST39WF1602 0x274a + #define SST39LF512 0x00D4 +@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec + ERASEINFO(0x10000,64), + } + }, { ++ .mfr_id = CFI_MFR_SST, ++ .dev_id = SST39VF6401B, ++ .name = "SST 39VF6401B", ++ .devtypes = CFI_DEVICETYPE_X16, ++ .uaddr = MTD_UADDR_0xAAAA_0x5555, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x10000,128) ++ } ++ }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29F800AB, + .name = "ST M29F800AB", diff --git a/trunk/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/trunk/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch new file mode 100644 index 00000000..1ccce4ec --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch @@ -0,0 +1,69 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1632,8 +1632,8 @@ static int __xipram do_write_oneword(str + break; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, datum)) ++ goto enable_xip; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1649,6 +1649,8 @@ static int __xipram do_write_oneword(str + + ret = -EIO; + } ++ ++ enable_xip: + xip_enable(map, chip, adr); + op_done: + if (mode == FL_OTP_WRITE) +@@ -2227,7 +2229,6 @@ static int cfi_amdstd_panic_write(struct + return 0; + } + +- + /* + * Handle devices with one erase region, that only implement + * the chip erase command. +@@ -2291,8 +2292,8 @@ static int __xipram do_erase_chip(struct + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, map_word_ff(map))) ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -2312,6 +2313,7 @@ static int __xipram do_erase_chip(struct + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); +@@ -2380,9 +2382,9 @@ static int __xipram do_erase_oneblock(st + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); +- break; ++ goto op_done; + } + + if (time_after(jiffies, timeo)) { +@@ -2404,6 +2406,7 @@ static int __xipram do_erase_oneblock(st + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + DISABLE_VPP(map); + put_chip(map, chip, adr); diff --git a/trunk/target/linux/ar71xx/patches-3.18/404-mtd-cybertan-trx-parser.patch b/trunk/target/linux/ar71xx/patches-3.18/404-mtd-cybertan-trx-parser.patch new file mode 100644 index 00000000..f4dbb922 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/404-mtd-cybertan-trx-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -184,6 +184,12 @@ config MTD_BCM47XX_PARTS + This provides partitions parser for devices based on BCM47xx + boards. + ++config MTD_CYBERTAN_PARTS ++ tristate "Cybertan partitioning support" ++ depends on ATH79 ++ ---help--- ++ Cybertan partitioning support ++ + config MTD_MYLOADER_PARTS + tristate "MyLoader partition parsing" + depends on ADM5120 || ATH25 || ATH79 +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch b/trunk/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch new file mode 100644 index 00000000..11a9beb1 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -206,6 +206,12 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_TPLINK_PARTS ++ tristate "TP-Link AR7XXX/AR9XXX partitioning support" ++ depends on ATH79 ++ ---help--- ++ TBD. ++ + comment "User Modules And Translation Layers" + + # +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o + obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o + + # 'Users' - code which presents functionality to userspace. diff --git a/trunk/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/trunk/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch new file mode 100644 index 00000000..568f5161 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -246,7 +246,9 @@ static int m25p_probe(struct spi_device + + ppdata.of_node = spi->dev.of_node; + +- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, ++ return mtd_device_parse_register(&flash->mtd, ++ data ? data->part_probes : NULL, ++ &ppdata, + data ? data->parts : NULL, + data ? data->nr_parts : 0); + } +--- a/include/linux/spi/flash.h ++++ b/include/linux/spi/flash.h +@@ -24,6 +24,7 @@ struct flash_platform_data { + unsigned int nr_parts; + + char *type; ++ const char **part_probes; + + /* we'll likely add more ... use JEDEC IDs, etc */ + }; diff --git a/trunk/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch b/trunk/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch new file mode 100644 index 00000000..cd41e7ce --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch @@ -0,0 +1,44 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; + while (mtd_block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; +@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; + + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); +@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block :) */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/trunk/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch b/trunk/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch new file mode 100644 index 00000000..77e43268 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -516,4 +516,8 @@ config MTD_NAND_XWAY + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && ATH79_MACH_RB4XX ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch new file mode 100644 index 00000000..cd2b6b1e --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -520,4 +520,8 @@ config MTD_NAND_RB4XX + tristate "NAND flash driver for RouterBoard 4xx series" + depends on MTD_NAND && ATH79_MACH_RB4XX + ++config MTD_NAND_RB750 ++ tristate "NAND flash driver for the RouterBoard 750" ++ depends on MTD_NAND && ATH79_MACH_RB750 ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o ++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch b/trunk/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch new file mode 100644 index 00000000..39c54781 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -40,7 +40,7 @@ + #include + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -51,7 +51,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru + mtd->_write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1791,6 +1795,7 @@ static int cfi_amdstd_write_words(struct + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1919,7 +1924,6 @@ static int __xipram do_write_buffer(stru + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1994,6 +1998,7 @@ static int cfi_amdstd_write_buffers(stru + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Wait for the flash chip to become ready to write data diff --git a/trunk/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch b/trunk/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch new file mode 100644 index 00000000..d51694d9 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch @@ -0,0 +1,10 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -244,6 +244,7 @@ static int m25p_probe(struct spi_device + if (ret) + return ret; + ++ memset(&ppdata, '\0', sizeof(ppdata)); + ppdata.of_node = spi->dev.of_node; + + return mtd_device_parse_register(&flash->mtd, diff --git a/trunk/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch new file mode 100644 index 00000000..51903831 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -524,4 +524,12 @@ config MTD_NAND_RB750 + tristate "NAND flash driver for the RouterBoard 750" + depends on MTD_NAND && ATH79_MACH_RB750 + ++config MTD_NAND_AR934X ++ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" ++ depends on (SOC_AR934X || SOC_QCA955X) ++ ++config MTD_NAND_AR934X_HW_ECC ++ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)" ++ depends on MTD_NAND_AR934X ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams- + obj-$(CONFIG_MTD_NAND_DENALI) += denali.o + obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o + obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o ++obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o + obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o + obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch new file mode 100644 index 00000000..174bb8b4 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -524,6 +524,10 @@ config MTD_NAND_RB750 + tristate "NAND flash driver for the RouterBoard 750" + depends on MTD_NAND && ATH79_MACH_RB750 + ++config MTD_NAND_RB91X ++ tristate "NAND flash driver for the RouterBOARD 91x series" ++ depends on MTD_NAND && ATH79_MACH_RB91X ++ + config MTD_NAND_AR934X + tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" + depends on (SOC_AR934X || SOC_QCA955X) +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o ++obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch b/trunk/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch new file mode 100644 index 00000000..5da869a1 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -5,7 +5,7 @@ + config NET_VENDOR_ATHEROS + bool "Atheros devices" + default y +- depends on PCI ++ depends on (PCI || ATH79) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from +@@ -80,4 +80,6 @@ config ALX + To compile this driver as a module, choose M here. The module + will be called alx. + ++source drivers/net/ethernet/atheros/ag71xx/Kconfig ++ + endif # NET_VENDOR_ATHEROS +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -2,6 +2,7 @@ + # Makefile for the Atheros network device drivers. + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_ATL1) += atlx/ + obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/trunk/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch b/trunk/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch new file mode 100644 index 00000000..b58aeedc --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch @@ -0,0 +1,11 @@ +--- a/net/dsa/tag_trailer.c ++++ b/net/dsa/tag_trailer.c +@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s + + trailer = skb_tail_pointer(skb) - 4; + if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || +- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) ++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) + goto out_drop; + + source_port = trailer[1] & 7; diff --git a/trunk/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch new file mode 100644 index 00000000..1348cd9b --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/net/dsa/Kconfig ++++ b/drivers/net/dsa/Kconfig +@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060 + This enables support for the Marvell 88E6060 ethernet switch + chip. + ++config NET_DSA_MV88E6063 ++ bool "Marvell 88E6063 ethernet switch chip support" ++ select NET_DSA_TAG_TRAILER ++ ---help--- ++ This enables support for the Marvell 88E6063 ethernet switch ++ chip ++ + config NET_DSA_MV88E6XXX_NEED_PPU + bool + default n +--- a/drivers/net/dsa/Makefile ++++ b/drivers/net/dsa/Makefile +@@ -1,4 +1,5 @@ + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o ++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o + obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o + mv88e6xxx_drv-y += mv88e6xxx.o + ifdef CONFIG_NET_DSA_MV88E6123_61_65 diff --git a/trunk/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch b/trunk/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch new file mode 100644 index 00000000..babc695c --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch @@ -0,0 +1,135 @@ +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -12,12 +12,14 @@ + */ + + #include ++#include + #include + #include + #include + #include + #include + #include ++#include + + #define AT803X_INTR_ENABLE 0x12 + #define AT803X_INTR_STATUS 0x13 +@@ -34,8 +36,16 @@ + #define AT803X_INER 0x0012 + #define AT803X_INER_INIT 0xec00 + #define AT803X_INSR 0x0013 ++ ++#define AT803X_PCS_SMART_EEE_CTRL3 0x805D ++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3 ++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12 ++#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8) ++ + #define AT803X_DEBUG_ADDR 0x1D + #define AT803X_DEBUG_DATA 0x1E ++#define AT803X_DBG0_REG 0x00 ++#define AT803X_DEBUG_RGMII_RX_CLK_DLY BIT(8) + #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 + #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) + +@@ -61,6 +71,43 @@ struct at803x_context { + u16 led_control; + }; + ++static u16 ++at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set) ++{ ++ struct mii_bus *bus = phydev->bus; ++ int val; ++ ++ mutex_lock(&bus->mdio_lock); ++ ++ bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg); ++ val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA); ++ if (val < 0) { ++ val = 0xffff; ++ goto out; ++ } ++ ++ val &= ~clear; ++ val |= set; ++ bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val); ++ ++out: ++ mutex_unlock(&bus->mdio_lock); ++ return val; ++} ++ ++static inline void ++at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set) ++{ ++ at803x_dbg_reg_rmw(phydev, reg, 0, set); ++} ++ ++static inline void ++at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear) ++{ ++ at803x_dbg_reg_rmw(phydev, reg, clear, 0); ++} ++ ++ + /* save relevant PHY registers to private copy */ + static void at803x_context_save(struct phy_device *phydev, + struct at803x_context *context) +@@ -208,8 +255,16 @@ static int at803x_probe(struct phy_devic + return 0; + } + ++static void at803x_disable_smarteee(struct phy_device *phydev) ++{ ++ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3, ++ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT); ++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); ++} ++ + static int at803x_config_init(struct phy_device *phydev) + { ++ struct at803x_platform_data *pdata; + int ret; + + ret = genphy_config_init(phydev); +@@ -227,6 +282,26 @@ static int at803x_config_init(struct phy + return ret; + } + ++ pdata = dev_get_platdata(&phydev->dev); ++ if (pdata) { ++ if (pdata->disable_smarteee) ++ at803x_disable_smarteee(phydev); ++ ++ if (pdata->enable_rgmii_rx_delay) ++ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG, ++ AT803X_DEBUG_RGMII_RX_CLK_DLY); ++ else ++ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG, ++ AT803X_DEBUG_RGMII_RX_CLK_DLY); ++ ++ if (pdata->enable_rgmii_tx_delay) ++ at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL, ++ AT803X_DEBUG_RGMII_TX_CLK_DLY); ++ else ++ at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL, ++ AT803X_DEBUG_RGMII_TX_CLK_DLY); ++ } ++ + return 0; + } + +--- /dev/null ++++ b/include/linux/platform_data/phy-at803x.h +@@ -0,0 +1,10 @@ ++#ifndef _PHY_AT803X_PDATA_H ++#define _PHY_AT803X_PDATA_H ++ ++struct at803x_platform_data { ++ int disable_smarteee:1; ++ int enable_rgmii_tx_delay:1; ++ int enable_rgmii_rx_delay:1; ++}; ++ ++#endif /* _PHY_AT803X_PDATA_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch b/trunk/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch new file mode 100644 index 00000000..22b701bf --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch @@ -0,0 +1,12 @@ +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -68,8 +68,8 @@ obj-$(CONFIG_IDE) += ide/ + obj-$(CONFIG_SCSI) += scsi/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPMI) += spmi/ + obj-y += hsi/ + obj-y += net/ diff --git a/trunk/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch b/trunk/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch new file mode 100644 index 00000000..91a4ff34 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch @@ -0,0 +1,19 @@ +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -620,6 +620,8 @@ struct spi_transfer { + unsigned cs_change:1; + unsigned tx_nbits:3; + unsigned rx_nbits:3; ++ unsigned verify:1; ++ unsigned fast_write:1; + #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ + #define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ + #define SPI_NBITS_QUAD 0x04 /* 4bits transfer */ +@@ -665,6 +667,7 @@ struct spi_message { + struct spi_device *spi; + + unsigned is_dma_mapped:1; ++ unsigned fast_read:1; + + /* REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" diff --git a/trunk/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch new file mode 100644 index 00000000..27159b3b --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -433,6 +433,12 @@ config SPI_QUP + This driver can also be built as a module. If so, the module + will be called spi_qup. + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && ATH79_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C24XX +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -62,6 +62,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_ + spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o ++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o + obj-$(CONFIG_SPI_QUP) += spi-qup.o + obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch new file mode 100644 index 00000000..47f0c242 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -647,6 +647,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on ATH79_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -63,6 +63,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_ + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o + obj-$(CONFIG_SPI_QUP) += spi-qup.o + obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch b/trunk/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch new file mode 100644 index 00000000..a67e8084 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch @@ -0,0 +1,27 @@ +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o + # SPI master controller drivers (bus) + obj-$(CONFIG_SPI_ALTERA) += spi-altera.o + obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o ++obj-$(CONFIG_SPI_AP83) += spi-ap83.o + obj-$(CONFIG_SPI_ATH79) += spi-ath79.o + obj-$(CONFIG_SPI_AU1550) += spi-au1550.o + obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -59,6 +59,14 @@ config SPI_ALTERA + help + This is the driver for the Altera SPI Controller. + ++config SPI_AP83 ++ tristate "Atheros AP83 specific SPI Controller" ++ depends on SPI_MASTER && ATH79_MACH_AP83 ++ select SPI_BITBANG ++ help ++ This is a specific SPI controller driver for the Atheros AP83 ++ reference board. ++ + config SPI_ATH79 + tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" + depends on ATH79 && GPIOLIB diff --git a/trunk/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch b/trunk/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch new file mode 100644 index 00000000..95c77dfe --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -662,6 +662,11 @@ config SPI_RB4XX_CPLD + SPI driver for the Xilinx CPLD chip present on the + MikroTik RB4xx boards. + ++config SPI_VSC7385 ++ tristate "Vitesse VSC7385 ethernet switch driver" ++ help ++ SPI driver for the Vitesse VSC7385 ethernet switch. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -86,6 +86,7 @@ obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi- + obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o + obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o + obj-$(CONFIG_SPI_TXX9) += spi-txx9.o ++obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o + obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o + obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o + obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch new file mode 100644 index 00000000..6e4fe24d --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -505,6 +505,13 @@ config LEDS_VERSATILE + This option enabled support for the LEDs on the ARM Versatile + and RealView boards. Say Y to enabled these. + ++config LEDS_WNDR3700_USB ++ tristate "NETGEAR WNDR3700 USB LED driver" ++ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 ++ help ++ This option enables support for the USB LED found on the ++ NETGEAR WNDR3700 board. ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -41,6 +41,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905 + obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_PWM) += leds-pwm.o ++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o + obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o + obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o + obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch new file mode 100644 index 00000000..714ab0c5 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -512,6 +512,10 @@ config LEDS_WNDR3700_USB + This option enables support for the USB LED found on the + NETGEAR WNDR3700 board. + ++config LEDS_RB750 ++ tristate "LED driver for the Mikrotik RouterBOARD 750" ++ depends on LEDS_CLASS && ATH79_MACH_RB750 ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 + obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o + obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o + obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o ++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o + obj-$(CONFIG_LEDS_NS2) += leds-ns2.o + obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o + obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch new file mode 100644 index 00000000..3cf5755d --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -905,4 +905,12 @@ config GPIO_VIPERBOARD + River Tech's viperboard.h for detailed meaning + of the module parameters. + ++comment "Other GPIO expanders" ++ ++config GPIO_NXP_74HC153 ++ tristate "NXP 74HC153 Dual 4-input multiplexer" ++ help ++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This ++ provides a GPIO interface supporting input mode only. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2 + obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o + obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o + obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o ++obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o + obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o + obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o + obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch b/trunk/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch new file mode 100644 index 00000000..5d29fae2 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch @@ -0,0 +1,111 @@ +--- a/drivers/gpio/gpio-74x164.c ++++ b/drivers/gpio/gpio-74x164.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -107,8 +108,18 @@ static int gen_74x164_direction_output(s + static int gen_74x164_probe(struct spi_device *spi) + { + struct gen_74x164_chip *chip; ++ struct gen_74x164_chip_platform_data *pdata; ++ struct device_node *np; + int ret; + ++ pdata = spi->dev.platform_data; ++ np = spi->dev.of_node; ++ ++ if (!np && !pdata) { ++ dev_err(&spi->dev, "No configuration data available.\n"); ++ return -EINVAL; ++ } ++ + /* + * bits_per_word cannot be configured in platform data + */ +@@ -130,18 +141,28 @@ static int gen_74x164_probe(struct spi_d + chip->gpio_chip.set = gen_74x164_set_value; + chip->gpio_chip.base = -1; + +- if (of_property_read_u32(spi->dev.of_node, "registers-number", +- &chip->registers)) { +- dev_err(&spi->dev, +- "Missing registers-number property in the DT.\n"); +- return -EINVAL; ++ if (np) { ++ if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) { ++ dev_err(&spi->dev, "Missing registers-number property in the DT.\n"); ++ ret = -EINVAL; ++ goto exit_destroy; ++ } ++ } else if (pdata) { ++ chip->gpio_chip.base = pdata->base; ++ chip->registers = pdata->num_registers; + } + ++ if (!chip->registers) ++ chip->registers = 1; ++ + chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; + chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); + if (!chip->buffer) + return -ENOMEM; + ++ if (pdata && pdata->init_data) ++ memcpy(chip->buffer, pdata->init_data, chip->registers); ++ + chip->gpio_chip.can_sleep = true; + chip->gpio_chip.dev = &spi->dev; + chip->gpio_chip.owner = THIS_MODULE; +@@ -174,17 +195,19 @@ static int gen_74x164_remove(struct spi_ + return 0; + } + ++#ifdef CONFIG_OF + static const struct of_device_id gen_74x164_dt_ids[] = { + { .compatible = "fairchild,74hc595" }, + {}, + }; + MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); ++#endif /* CONFIG_OF */ + + static struct spi_driver gen_74x164_driver = { + .driver = { + .name = "74x164", + .owner = THIS_MODULE, +- .of_match_table = gen_74x164_dt_ids, ++ .of_match_table = of_match_ptr(gen_74x164_dt_ids), + }, + .probe = gen_74x164_probe, + .remove = gen_74x164_remove, +--- /dev/null ++++ b/include/linux/spi/74x164.h +@@ -0,0 +1,13 @@ ++#ifndef LINUX_SPI_74X164_H ++#define LINUX_SPI_74X164_H ++ ++struct gen_74x164_chip_platform_data { ++ /* number assigned to the first GPIO */ ++ unsigned base; ++ /* number of chained registers */ ++ unsigned num_registers; ++ /* address of a buffer containing initial data */ ++ u8 *init_data; ++}; ++ ++#endif +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -821,7 +821,7 @@ config GPIO_MC33880 + + config GPIO_74X164 + tristate "74x164 serial-in/parallel-out 8-bits shift register" +- depends on SPI_MASTER && OF ++ depends on SPI_MASTER + help + Driver for 74x164 compatible serial-in/parallel-out 8-outputs + shift registers. This driver can be used to provide access diff --git a/trunk/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch b/trunk/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch new file mode 100644 index 00000000..405923a9 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch @@ -0,0 +1,22 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -913,4 +913,9 @@ config GPIO_NXP_74HC153 + Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This + provides a GPIO interface supporting input mode only. + ++config GPIO_LATCH ++ tristate "GPIO latch driver" ++ help ++ Say yes here to enable a GPIO latch driver. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -39,6 +39,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz + obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o + obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o + obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o ++obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o + obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o + obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o + obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch b/trunk/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch new file mode 100644 index 00000000..010958be --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch @@ -0,0 +1,28 @@ +--- a/drivers/spi/spi-bitbang.c ++++ b/drivers/spi/spi-bitbang.c +@@ -233,13 +233,14 @@ void spi_bitbang_cleanup(struct spi_devi + } + EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); + +-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) ++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) + { + struct spi_bitbang_cs *cs = spi->controller_state; + unsigned nsecs = cs->nsecs; + + return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); + } ++EXPORT_SYMBOL_GPL(spi_bitbang_bufs); + + /*----------------------------------------------------------------------*/ + +--- a/include/linux/spi/spi_bitbang.h ++++ b/include/linux/spi/spi_bitbang.h +@@ -39,6 +39,7 @@ extern int spi_bitbang_setup(struct spi_ + extern void spi_bitbang_cleanup(struct spi_device *spi); + extern int spi_bitbang_setup_transfer(struct spi_device *spi, + struct spi_transfer *t); ++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t); + + /* start or stop queue processing */ + extern int spi_bitbang_start(struct spi_bitbang *spi); diff --git a/trunk/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch b/trunk/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch new file mode 100644 index 00000000..a1a51dfd --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch @@ -0,0 +1,23 @@ +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -508,6 +508,12 @@ extern struct spi_master *spi_busnum_to_ + + /*---------------------------------------------------------------------------*/ + ++enum spi_transfer_type { ++ SPI_TRANSFER_GENERIC = 0, ++ SPI_TRANSFER_FLASH_READ_CMD, ++ SPI_TRANSFER_FLASH_READ_DATA, ++}; ++ + /* + * I/O INTERFACE between SPI controller and protocol drivers + * +@@ -628,6 +634,7 @@ struct spi_transfer { + u8 bits_per_word; + u16 delay_usecs; + u32 speed_hz; ++ enum spi_transfer_type type; + + struct list_head transfer_list; + }; diff --git a/trunk/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch b/trunk/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch new file mode 100644 index 00000000..3320e5b8 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch @@ -0,0 +1,15 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -142,10 +142,12 @@ static int m25p80_read(struct spi_nor *n + flash->command[0] = nor->read_opcode; + m25p_addr2cmd(nor, from, flash->command); + ++ t[0].type = SPI_TRANSFER_FLASH_READ_CMD; + t[0].tx_buf = flash->command; + t[0].len = m25p_cmdsz(nor) + dummy; + spi_message_add_tail(&t[0], &m); + ++ t[1].type = SPI_TRANSFER_FLASH_READ_DATA; + t[1].rx_buf = buf; + t[1].rx_nbits = m25p80_rx_nbits(nor); + t[1].len = len; diff --git a/trunk/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch b/trunk/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch new file mode 100644 index 00000000..0e0e28f8 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch @@ -0,0 +1,185 @@ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -35,6 +35,11 @@ + + #define ATH79_SPI_CS_LINE_MAX 2 + ++enum ath79_spi_state { ++ ATH79_SPI_STATE_WAIT_CMD = 0, ++ ATH79_SPI_STATE_WAIT_READ, ++}; ++ + struct ath79_spi { + struct spi_bitbang bitbang; + u32 ioc_base; +@@ -42,6 +47,11 @@ struct ath79_spi { + void __iomem *base; + struct clk *clk; + unsigned rrw_delay; ++ ++ enum ath79_spi_state state; ++ u32 clk_div; ++ unsigned long read_addr; ++ unsigned long ahb_rate; + }; + + static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) +@@ -109,9 +119,6 @@ static void ath79_spi_enable(struct ath7 + /* save CTRL register */ + sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); + sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); +- +- /* TODO: setup speed? */ +- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); + } + + static void ath79_spi_disable(struct ath79_spi *sp) +@@ -224,6 +231,110 @@ static u32 ath79_spi_txrx_mode0(struct s + return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); + } + ++static int ath79_spi_do_read_flash_data(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ ++ /* disable GPIO mode */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); ++ ++ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len); ++ ++ /* enable GPIO mode */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); ++ ++ /* restore IOC register */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); ++ ++ return t->len; ++} ++ ++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ int len; ++ const u8 *p; ++ ++ sp->read_addr = 0; ++ ++ len = t->len - 1; ++ p = t->tx_buf; ++ ++ while (len--) { ++ p++; ++ sp->read_addr <<= 8; ++ sp->read_addr |= *p; ++ } ++ ++ return t->len; ++} ++ ++static bool ath79_spi_is_read_cmd(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ return t->type == SPI_TRANSFER_FLASH_READ_CMD; ++} ++ ++static bool ath79_spi_is_data_read(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ return t->type == SPI_TRANSFER_FLASH_READ_DATA; ++} ++ ++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ int ret; ++ ++ switch (sp->state) { ++ case ATH79_SPI_STATE_WAIT_CMD: ++ if (ath79_spi_is_read_cmd(spi, t)) { ++ ret = ath79_spi_do_read_flash_cmd(spi, t); ++ sp->state = ATH79_SPI_STATE_WAIT_READ; ++ } else { ++ ret = spi_bitbang_bufs(spi, t); ++ } ++ break; ++ ++ case ATH79_SPI_STATE_WAIT_READ: ++ if (ath79_spi_is_data_read(spi, t)) { ++ ret = ath79_spi_do_read_flash_data(spi, t); ++ } else { ++ dev_warn(&spi->dev, "flash data read expected\n"); ++ ret = -EIO; ++ } ++ sp->state = ATH79_SPI_STATE_WAIT_CMD; ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ return ret; ++} ++ ++static int ath79_spi_setup_transfer(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ struct ath79_spi_controller_data *cdata; ++ int ret; ++ ++ ret = spi_bitbang_setup_transfer(spi, t); ++ if (ret) ++ return ret; ++ ++ cdata = spi->controller_data; ++ if (cdata->is_flash) ++ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs; ++ else ++ sp->bitbang.txrx_bufs = spi_bitbang_bufs; ++ ++ return ret; ++} ++ + static int ath79_spi_probe(struct platform_device *pdev) + { + struct spi_master *master; +@@ -246,6 +357,8 @@ static int ath79_spi_probe(struct platfo + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + ++ sp->state = ATH79_SPI_STATE_WAIT_CMD; ++ + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; +@@ -255,7 +368,7 @@ static int ath79_spi_probe(struct platfo + sp->bitbang.master = master; + sp->bitbang.chipselect = ath79_spi_chipselect; + sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; +- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; ++ sp->bitbang.setup_transfer = ath79_spi_setup_transfer; + sp->bitbang.flags = SPI_CS_HIGH; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); +@@ -280,7 +393,8 @@ static int ath79_spi_probe(struct platfo + if (ret) + goto err_put_master; + +- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); ++ sp->ahb_rate = clk_get_rate(sp->clk); ++ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ); + if (!rate) { + ret = -EINVAL; + goto err_clk_disable; +--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h ++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h +@@ -24,6 +24,7 @@ enum ath79_spi_cs_type { + struct ath79_spi_controller_data { + enum ath79_spi_cs_type cs_type; + unsigned cs_line; ++ bool is_flash; + }; + + #endif /* _ATH79_SPI_PLATFORM_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch b/trunk/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch new file mode 100644 index 00000000..4f886820 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch @@ -0,0 +1,35 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -142,6 +142,9 @@ static int m25p80_read(struct spi_nor *n + flash->command[0] = nor->read_opcode; + m25p_addr2cmd(nor, from, flash->command); + ++ if (dummy == 1) ++ t[0].dummy = true; ++ + t[0].type = SPI_TRANSFER_FLASH_READ_CMD; + t[0].tx_buf = flash->command; + t[0].len = m25p_cmdsz(nor) + dummy; +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -260,6 +260,10 @@ static int ath79_spi_do_read_flash_cmd(s + sp->read_addr = 0; + + len = t->len - 1; ++ ++ if (t->dummy) ++ len -= 1; ++ + p = t->tx_buf; + + while (len--) { +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -635,6 +635,7 @@ struct spi_transfer { + u16 delay_usecs; + u32 speed_hz; + enum spi_transfer_type type; ++ bool dummy; + + struct list_head transfer_list; + }; diff --git a/trunk/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/trunk/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch new file mode 100644 index 00000000..520c6520 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch @@ -0,0 +1,111 @@ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h +@@ -0,0 +1,37 @@ ++/* ++ * Copyright (C) 2012 Gabor Juhos ++ * ++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H ++#define __ASM_MACH_ATH79_MANGLE_PORT_H ++ ++#ifdef CONFIG_PCI ++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); ++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); ++#else ++#define ath79_pci_swizzle_b(port) (port) ++#define ath79_pci_swizzle_w(port) (port) ++#endif ++ ++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) ++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) ++#define __swizzle_addr_l(port) (port) ++#define __swizzle_addr_q(port) (port) ++ ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define __mem_ioswabw(a, x) cpu_to_le16(x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabl(a, x) cpu_to_le32(x) ++# define ioswabq(a, x) (x) ++# define __mem_ioswabq(a, x) cpu_to_le64(x) ++ ++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -13,6 +13,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st + static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; + static unsigned ath79_pci_nr_irqs __initdata; + ++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); ++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); ++ + static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { + { + .slot = 17, +@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id, + return pdev; + } + ++static inline bool ar71xx_is_pci_addr(unsigned long port) ++{ ++ unsigned long phys = CPHYSADDR(port); ++ ++ return (phys >= AR71XX_PCI_MEM_BASE && ++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); ++} ++ ++static unsigned long ar71xx_pci_swizzle_b(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; ++} ++ ++static unsigned long ar71xx_pci_swizzle_w(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; ++} ++ ++unsigned long ath79_pci_swizzle_b(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_b) ++ return __ath79_pci_swizzle_b(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_b); ++ ++unsigned long ath79_pci_swizzle_w(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_w) ++ return __ath79_pci_swizzle_w(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_w); ++ + int __init ath79_register_pci(void) + { + struct platform_device *pdev = NULL; + + if (soc_is_ar71xx()) { + pdev = ath79_register_pci_ar71xx(); ++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; ++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; + } else if (soc_is_ar724x()) { + pdev = ath79_register_pci_ar724x(-1, + AR724X_PCI_CFG_BASE, diff --git a/trunk/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch b/trunk/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch new file mode 100644 index 00000000..9b704a3c --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac + }, + }; + +-static void __init ar913x_wmac_setup(void) ++static int ar913x_wmac_reset(void) + { + /* reset the WMAC */ + ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); +@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi + ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); + mdelay(10); + ++ return 0; ++} ++ ++static void __init ar913x_wmac_setup(void) ++{ ++ ar913x_wmac_reset(); ++ + ath79_wmac_resources[0].start = AR913X_WMAC_BASE; + ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; + ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); + ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); ++ ++ ath79_wmac_data.external_reset = ar913x_wmac_reset; + } + + diff --git a/trunk/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch b/trunk/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch new file mode 100644 index 00000000..a5053130 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch @@ -0,0 +1,103 @@ +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -252,6 +252,37 @@ static int ehci_reset (struct ehci_hcd * + command |= CMD_RESET; + dbg_cmd (ehci, "reset", command); + ehci_writel(ehci, command, &ehci->regs->command); ++ ++ if (ehci->qca_force_host_mode) { ++ u32 usbmode; ++ ++ udelay(1000); ++ ++ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); ++ usbmode |= USBMODE_CM_HC | (1 << 4); ++ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); ++ ++ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", ++ ehci_readl(ehci, &ehci->regs->usbmode)); ++ } ++ ++ if (ehci->qca_force_16bit_ptw) { ++ u32 port_status; ++ ++ udelay(1000); ++ ++ /* enable 16-bit UTMI interface */ ++ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); ++ port_status |= BIT(28); ++ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); ++ ++ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", ++ ehci_readl(ehci, &ehci->regs->port_status[0])); ++ } ++ ++ if (ehci->reset_notifier) ++ ehci->reset_notifier(ehci_to_hcd(ehci)); ++ + ehci->rh_state = EHCI_RH_HALTED; + ehci->next_statechange = jiffies; + retval = ehci_handshake(ehci, &ehci->regs->command, +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -227,6 +227,10 @@ struct ehci_hcd { /* one per controlle + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ ++ ++ void (*reset_notifier)(struct usb_hcd *hcd); + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) +--- a/include/linux/usb/ehci_pdriver.h ++++ b/include/linux/usb/ehci_pdriver.h +@@ -46,6 +46,8 @@ struct usb_ehci_pdata { + unsigned big_endian_mmio:1; + unsigned no_io_watchdog:1; + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); +@@ -55,6 +57,7 @@ struct usb_ehci_pdata { + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); + int (*pre_setup)(struct usb_hcd *hcd); ++ void (*reset_notifier)(struct platform_device *pdev); + }; + + #endif /* __USB_CORE_EHCI_PDRIVER_H */ +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -48,6 +48,14 @@ struct ehci_platform_priv { + + static const char hcd_name[] = "ehci-platform"; + ++static void ehci_platform_reset_notifier(struct usb_hcd *hcd) ++{ ++ struct platform_device *pdev = to_platform_device(hcd->self.controller); ++ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; ++ ++ pdata->reset_notifier(pdev); ++} ++ + static int ehci_platform_reset(struct usb_hcd *hcd) + { + struct platform_device *pdev = to_platform_device(hcd->self.controller); +@@ -228,6 +236,13 @@ static int ehci_platform_probe(struct pl + ehci->big_endian_mmio = 1; + if (pdata->ignore_oc) + ehci->ignore_oc = 1; ++ if (pdata->qca_force_host_mode) ++ ehci->qca_force_host_mode = 1; ++ if (pdata->qca_force_16bit_ptw) ++ ehci->qca_force_16bit_ptw = 1; ++ ++ if (pdata->reset_notifier) ++ ehci->reset_notifier = ehci_platform_reset_notifier; + + #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { diff --git a/trunk/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch b/trunk/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch new file mode 100644 index 00000000..2a894430 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -208,6 +208,7 @@ endif + # + libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -982,6 +982,9 @@ config MIPS_MSC + config MIPS_NILE4 + bool + ++config MYLOADER ++ bool ++ + config SYNC_R4K + bool + diff --git a/trunk/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/trunk/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch new file mode 100644 index 00000000..d9b8682f --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch @@ -0,0 +1,81 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -22,6 +23,7 @@ + #include + #include "dev-wmac.h" + ++static u8 ath79_wmac_mac[ETH_ALEN]; + static struct ath9k_platform_data ath79_wmac_data; + + static struct resource ath79_wmac_resources[] = { +@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + +-void __init ath79_register_wmac(u8 *cal_data) ++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); +@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_ + memcpy(ath79_wmac_data.eeprom_data, cal_data, + sizeof(ath79_wmac_data.eeprom_data)); + ++ if (mac_addr) { ++ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); ++ ath79_wmac_data.macaddr = ath79_wmac_mac; ++ } ++ + platform_device_register(&ath79_wmac_device); + } +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -12,6 +12,6 @@ + #ifndef _ATH79_DEV_WMAC_H + #define _ATH79_DEV_WMAC_H + +-void ath79_register_wmac(u8 *cal_data); ++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + + #endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -98,7 +98,7 @@ static void __init ap81_setup(void) + ap81_gpio_keys); + ath79_register_spi(&ap81_spi_data, ap81_spi_info, + ARRAY_SIZE(ap81_spi_info)); +- ath79_register_wmac(cal_data); ++ ath79_register_wmac(cal_data, NULL); + ath79_register_usb(); + } + +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -134,7 +134,7 @@ static void __init db120_setup(void) + ath79_register_spi(&db120_spi_data, db120_spi_info, + ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); ++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); + } + +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -91,7 +91,7 @@ static void __init ap121_setup(void) + ath79_register_spi(&ap121_spi_data, ap121_spi_info, + ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data); ++ ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/trunk/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch b/trunk/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch new file mode 100644 index 00000000..73eb8e10 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch @@ -0,0 +1,23 @@ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -25,7 +25,9 @@ + #include + #include "common.h" + +-static void __iomem *ath79_gpio_base; ++void __iomem *ath79_gpio_base; ++EXPORT_SYMBOL_GPL(ath79_gpio_base); ++ + static unsigned long ath79_gpio_count; + static DEFINE_SPINLOCK(ath79_gpio_lock); + +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void) + } + + extern void __iomem *ath79_ddr_base; ++extern void __iomem *ath79_gpio_base; + extern void __iomem *ath79_pll_base; + extern void __iomem *ath79_reset_base; + diff --git a/trunk/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch b/trunk/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch new file mode 100644 index 00000000..06f79029 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch @@ -0,0 +1,37 @@ +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -22,6 +22,7 @@ + #include "common.h" + + static DEFINE_SPINLOCK(ath79_device_reset_lock); ++static DEFINE_MUTEX(ath79_flash_mutex); + + u32 ath79_cpu_freq; + EXPORT_SYMBOL_GPL(ath79_cpu_freq); +@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask) + spin_unlock_irqrestore(&ath79_device_reset_lock, flags); + } + EXPORT_SYMBOL_GPL(ath79_device_reset_clear); ++ ++void ath79_flash_acquire(void) ++{ ++ mutex_lock(&ath79_flash_mutex); ++} ++EXPORT_SYMBOL_GPL(ath79_flash_acquire); ++ ++void ath79_flash_release(void) ++{ ++ mutex_unlock(&ath79_flash_mutex); ++} ++EXPORT_SYMBOL_GPL(ath79_flash_release); ++ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); + ++void ath79_flash_acquire(void); ++void ath79_flash_release(void); ++ + #endif /* __ASM_MACH_ATH79_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch b/trunk/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch new file mode 100644 index 00000000..024a85d0 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch @@ -0,0 +1,45 @@ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne + + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); ++u32 ath79_device_reset_get(u32 mask); + + void ath79_flash_acquire(void); + void ath79_flash_release(void); +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask) + } + EXPORT_SYMBOL_GPL(ath79_device_reset_clear); + ++u32 ath79_device_reset_get(u32 mask) ++{ ++ unsigned long flags; ++ u32 reg; ++ u32 ret; ++ ++ if (soc_is_ar71xx()) ++ reg = AR71XX_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar724x()) ++ reg = AR724X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar913x()) ++ reg = AR913X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar933x()) ++ reg = AR933X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar934x()) ++ reg = AR934X_RESET_REG_RESET_MODULE; ++ else ++ BUG(); ++ ++ spin_lock_irqsave(&ath79_device_reset_lock, flags); ++ ret = ath79_reset_rr(reg); ++ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(ath79_device_reset_get); ++ + void ath79_flash_acquire(void) + { + mutex_lock(&ath79_flash_mutex); diff --git a/trunk/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/trunk/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch new file mode 100644 index 00000000..4c4c8914 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch @@ -0,0 +1,47 @@ +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -27,6 +27,7 @@ void ath79_ddr_wb_flush(unsigned int reg + void ath79_gpio_function_enable(u32 mask); + void ath79_gpio_function_disable(u32 mask); + void ath79_gpio_function_setup(u32 set, u32 clear); ++void ath79_gpio_output_select(unsigned gpio, u8 val); + void ath79_gpio_init(void); + + #endif /* __ATH79_COMMON_H */ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas + ath79_gpio_function_setup(0, mask); + } + ++void __init ath79_gpio_output_select(unsigned gpio, u8 val) ++{ ++ void __iomem *base = ath79_gpio_base; ++ unsigned long flags; ++ unsigned int reg; ++ u32 t, s; ++ ++ BUG_ON(!soc_is_ar934x()); ++ ++ if (gpio >= AR934X_GPIO_COUNT) ++ return; ++ ++ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); ++ s = 8 * (gpio % 4); ++ ++ spin_lock_irqsave(&ath79_gpio_lock, flags); ++ ++ t = __raw_readl(base + reg); ++ t &= ~(0xff << s); ++ t |= val << s; ++ __raw_writel(t, base + reg); ++ ++ /* flush write */ ++ (void) __raw_readl(base + reg); ++ ++ spin_unlock_irqrestore(&ath79_gpio_lock, flags); ++} ++ + void __init ath79_gpio_init(void) + { + int err; diff --git a/trunk/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch b/trunk/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch new file mode 100644 index 00000000..aab959b9 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch @@ -0,0 +1,86 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -19,6 +19,8 @@ + + #include "common.h" + ++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; ++ + static inline int is_valid_ram_addr(void *addr) + { + if (((u32) addr > KSEG0) && +@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void + return 0; + } + ++static void __init ath79_prom_append_cmdline(const char *name, ++ const char *value) ++{ ++ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), ++ " %s=%s", name, value); ++ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); ++} ++ ++static const char * __init ath79_prom_find_env(char **envp, const char *name) ++{ ++ const char *ret = NULL; ++ int len; ++ char **p; ++ ++ if (!is_valid_ram_addr(envp)) ++ return NULL; ++ ++ len = strlen(name); ++ for (p = envp; is_valid_ram_addr(*p); p++) { ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { ++ ret = *p + len + 1; ++ break; ++ } ++ ++ /* RedBoot env comes in pointer pairs - key, value */ ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) ++ if (is_valid_ram_addr(*(++p))) { ++ ret = *p; ++ break; ++ } ++ } ++ ++ return ret; ++} ++ + static __init void ath79_prom_init_cmdline(int argc, char **argv) + { + int i; +@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli + + void __init prom_init(void) + { ++ const char *env; ++ char **envp; ++ + ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); ++ ++ envp = (char **)fw_arg2; ++ if (!strstr(arcs_cmdline, "ethaddr=")) { ++ env = ath79_prom_find_env(envp, "ethaddr"); ++ if (env) ++ ath79_prom_append_cmdline("ethaddr", env); ++ } ++ ++ if (!strstr(arcs_cmdline, "board=")) { ++ env = ath79_prom_find_env(envp, "board"); ++ if (env) { ++ /* Workaround for buggy bootloaders */ ++ if (strcmp(env, "RouterStation") == 0 || ++ strcmp(env, "Ubiquiti AR71xx-based board") == 0) ++ env = "UBNT-RS"; ++ ++ if (strcmp(env, "RouterStation PRO") == 0) ++ env = "UBNT-RSPRO"; ++ ++ ath79_prom_append_cmdline("board", env); ++ } ++ } + } + + void __init prom_free_prom_memory(void) diff --git a/trunk/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch b/trunk/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch new file mode 100644 index 00000000..67c1faf9 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch @@ -0,0 +1,58 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -16,6 +16,7 @@ + + #include + #include ++#include + + #include "common.h" + +@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi + return ret; + } + ++static int __init ath79_prom_init_myloader(void) ++{ ++ struct myloader_info *mylo; ++ char mac_buf[32]; ++ unsigned char *mac; ++ ++ mylo = myloader_get_info(); ++ if (!mylo) ++ return 0; ++ ++ switch (mylo->did) { ++ case DEVID_COMPEX_WP543: ++ ath79_prom_append_cmdline("board", "WP543"); ++ break; ++ case DEVID_COMPEX_WPE72: ++ ath79_prom_append_cmdline("board", "WPE72"); ++ break; ++ default: ++ pr_warn("prom: unknown device id: %x\n", mylo->did); ++ return 0; ++ } ++ ++ mac = mylo->macs[0]; ++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ ++ ath79_prom_append_cmdline("ethaddr", mac_buf); ++ ++ return 1; ++} ++ + static __init void ath79_prom_init_cmdline(int argc, char **argv) + { + int i; +@@ -88,6 +120,9 @@ void __init prom_init(void) + const char *env; + char **envp; + ++ if (ath79_prom_init_myloader()) ++ return; ++ + ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); + + envp = (char **)fw_arg2; diff --git a/trunk/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch b/trunk/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch new file mode 100644 index 00000000..72a3b566 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch @@ -0,0 +1,57 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi + return ret; + } + ++#ifdef CONFIG_IMAGE_CMDLINE_HACK ++extern char __image_cmdline[]; ++ ++static int __init ath79_use_image_cmdline(void) ++{ ++ char *p = __image_cmdline; ++ int replace = 0; ++ ++ if (*p == '-') { ++ replace = 1; ++ p++; ++ } ++ ++ if (*p == '\0') ++ return 0; ++ ++ if (replace) { ++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } else { ++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); ++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } ++ ++ return 1; ++} ++#else ++static inline int ath79_use_image_cmdline(void) { return 0; } ++#endif ++ + static int __init ath79_prom_init_myloader(void) + { + struct myloader_info *mylo; +@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload + + ath79_prom_append_cmdline("ethaddr", mac_buf); + ++ ath79_use_image_cmdline(); ++ + return 1; + } + +@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli + { + int i; + ++ if (ath79_use_image_cmdline()) ++ return; ++ + if (!is_valid_ram_addr(argv)) + return; + diff --git a/trunk/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch b/trunk/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch new file mode 100644 index 00000000..42f6b77e --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -229,6 +229,8 @@ void __init plat_time_init(void) + mips_hpt_frequency = cpu_clk_rate / 2; + } + ++__setup("board=", mips_machtype_setup); ++ + static int __init ath79_setup(void) + { + ath79_gpio_init(); diff --git a/trunk/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/trunk/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch new file mode 100644 index 00000000..2d2235e2 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch @@ -0,0 +1,14 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -24,7 +24,10 @@ + #include "dev-wmac.h" + + static u8 ath79_wmac_mac[ETH_ALEN]; +-static struct ath9k_platform_data ath79_wmac_data; ++ ++static struct ath9k_platform_data ath79_wmac_data = { ++ .led_pin = -1, ++}; + + static struct resource ath79_wmac_resources[] = { + { diff --git a/trunk/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch b/trunk/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch new file mode 100644 index 00000000..019e558a --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch @@ -0,0 +1,18 @@ +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -80,6 +80,15 @@ void __init ath79_register_uart(void) + + uart_clk_rate = ath79_get_sys_clk_rate("uart"); + ++ if (soc_is_ar71xx()) ++ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar724x()) ++ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar913x()) ++ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar933x()) ++ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN); ++ + if (soc_is_ar71xx() || + soc_is_ar724x() || + soc_is_ar913x() || diff --git a/trunk/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch b/trunk/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch new file mode 100644 index 00000000..3d6ddfe1 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch @@ -0,0 +1,61 @@ +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned + /* nothing to do */ + } + ++static void prom_enable_uart(u32 id) ++{ ++ void __iomem *gpio_base; ++ u32 uart_en; ++ u32 t; ++ ++ switch (id) { ++ case REV_ID_MAJOR_AR71XX: ++ uart_en = AR71XX_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR7240: ++ case REV_ID_MAJOR_AR7241: ++ case REV_ID_MAJOR_AR7242: ++ uart_en = AR724X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR913X: ++ uart_en = AR913X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR9330: ++ case REV_ID_MAJOR_AR9331: ++ uart_en = AR933X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR9341: ++ case REV_ID_MAJOR_AR9342: ++ case REV_ID_MAJOR_AR9344: ++ /* TODO */ ++ default: ++ return; ++ } ++ ++ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); ++ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); ++ t |= uart_en; ++ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); ++} ++ + static void prom_putchar_init(void) + { + void __iomem *base; +@@ -86,8 +126,10 @@ static void prom_putchar_init(void) + + default: + _prom_putchar = prom_putchar_dummy; +- break; ++ return; + } ++ ++ prom_enable_uart(id); + } + + void prom_putchar(unsigned char ch) diff --git a/trunk/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/trunk/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch new file mode 100644 index 00000000..74928e68 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_ + + platform_device_register(&ath79_wmac_device); + } ++ ++void __init ath79_register_wmac_simple(void) ++{ ++ ath79_register_wmac(NULL, NULL); ++ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom"; ++} +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -13,5 +13,6 @@ + #define _ATH79_DEV_WMAC_H + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); ++void ath79_register_wmac_simple(void); + + #endif /* _ATH79_DEV_WMAC_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch b/trunk/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch new file mode 100644 index 00000000..5ff1cb83 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch @@ -0,0 +1,166 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + ++static bool __init ++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) ++{ ++ int timeout = 1000; ++ u32 val; ++ ++ __raw_readl(base + AR9300_OTP_BASE + (4 * addr)); ++ while (timeout--) { ++ val = __raw_readl(base + AR9300_OTP_STATUS); ++ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID) ++ break; ++ ++ udelay(10); ++ } ++ ++ if (!timeout) ++ return false; ++ ++ *data = __raw_readl(base + AR9300_OTP_READ_DATA); ++ return true; ++} ++ ++static bool __init ++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len) ++{ ++ u32 data; ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ int offset = 8 * ((addr - i) % 4); ++ ++ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data)) ++ return false; ++ ++ dest[i] = (data >> offset) & 0xff; ++ } ++ ++ return true; ++} ++ ++static bool __init ++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest, ++ int dest_start, int dest_len) ++{ ++ int dest_bytes = 0; ++ int offset = 0; ++ int end = addr - len; ++ u8 hdr[2]; ++ ++ while (addr > end) { ++ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2)) ++ return false; ++ ++ addr -= 2; ++ offset += hdr[0]; ++ ++ if (offset <= dest_start + dest_len && ++ offset + len >= dest_start) { ++ int data_offset = 0; ++ int dest_offset = 0; ++ int copy_len; ++ ++ if (offset < dest_start) ++ data_offset = dest_start - offset; ++ else ++ dest_offset = offset - dest_start; ++ ++ copy_len = len - data_offset; ++ if (copy_len > dest_len - dest_offset) ++ copy_len = dest_len - dest_offset; ++ ++ ar93xx_wmac_otp_read(base, addr - data_offset, ++ dest + dest_offset, ++ copy_len); ++ ++ dest_bytes += copy_len; ++ } ++ addr -= hdr[1]; ++ } ++ return !!dest_bytes; ++} ++ ++bool __init ar93xx_wmac_read_mac_address(u8 *dest) ++{ ++ void __iomem *base; ++ bool ret = false; ++ int addr = 0x1ff; ++ unsigned int len; ++ u32 hdr_u32; ++ u8 *hdr = (u8 *) &hdr_u32; ++ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 }; ++ int mac_start = 2, mac_end = 8; ++ ++ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x()); ++ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE); ++ while (addr > sizeof(hdr)) { ++ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr))) ++ break; ++ ++ if (hdr_u32 == 0 || hdr_u32 == ~0) ++ break; ++ ++ len = (hdr[1] << 4) | (hdr[2] >> 4); ++ addr -= 4; ++ ++ switch (hdr[0] >> 5) { ++ case 0: ++ if (len < mac_end) ++ break; ++ ++ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6); ++ ret = true; ++ break; ++ case 3: ++ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac, ++ mac_start, 6); ++ break; ++ default: ++ break; ++ } ++ ++ addr -= len + 2; ++ } ++ ++ iounmap(base); ++ if (ret) ++ memcpy(dest, mac, 6); ++ ++ return ret; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -14,5 +14,6 @@ + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + void ath79_register_wmac_simple(void); ++bool ar93xx_wmac_read_mac_address(u8 *dest); + + #endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -112,6 +112,14 @@ + #define QCA955X_EHCI1_BASE 0x1b400000 + #define QCA955X_EHCI_SIZE 0x1000 + ++#define AR9300_OTP_BASE 0x14000 ++#define AR9300_OTP_STATUS 0x15f18 ++#define AR9300_OTP_STATUS_TYPE 0x7 ++#define AR9300_OTP_STATUS_VALID 0x4 ++#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 ++#define AR9300_OTP_STATUS_SM_BUSY 0x1 ++#define AR9300_OTP_READ_DATA 0x15f1c ++ + /* + * DDR_CTRL block + */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/trunk/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch new file mode 100644 index 00000000..7b4b6ef2 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address + return ret; + } + ++void __init ath79_wmac_disable_2ghz(void) ++{ ++ ath79_wmac_data.disable_2ghz = true; ++} ++ ++void __init ath79_wmac_disable_5ghz(void) ++{ ++ ath79_wmac_data.disable_5ghz = true; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -14,6 +14,9 @@ + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + void ath79_register_wmac_simple(void); ++void ath79_wmac_disable_2ghz(void); ++void ath79_wmac_disable_5ghz(void); ++ + bool ar93xx_wmac_read_mac_address(u8 *dest); + + #endif /* _ATH79_DEV_WMAC_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch b/trunk/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch new file mode 100644 index 00000000..0e33674a --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch @@ -0,0 +1,101 @@ +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_ + static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { + .caps_offset = 0x100, + .has_tt = 1, ++ .qca_force_host_mode = 1, ++ .qca_force_16bit_ptw = 1, + }; + + static void __init ath79_usb_register(const char *name, int id, +@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void + ath79_device_reset_clear(AR913X_RESET_USB_PHY); + mdelay(10); + ++ ath79_ehci_pdata_v2.qca_force_host_mode = 0; ++ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0; ++ + ath79_usb_register("ehci-platform", -1, + AR913X_EHCI_BASE, AR913X_EHCI_SIZE, + ATH79_CPU_IRQ(3), +@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + +-static void __init ar934x_usb_setup(void) ++static void enable_tx_tx_idp_violation_fix(unsigned base) + { +- u32 bootstrap; ++ void __iomem *phy_reg; ++ u32 t; ++ ++ phy_reg = ioremap(base, 4); ++ if (!phy_reg) ++ return; ++ ++ t = ioread32(phy_reg); ++ t &= ~0xff; ++ t |= 0x58; ++ iowrite32(t, phy_reg); ++ ++ iounmap(phy_reg); ++} + +- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) ++static void ar934x_usb_reset_notifier(struct platform_device *pdev) ++{ ++ if (pdev->id != -1) + return; + ++ enable_tx_tx_idp_violation_fix(0x18116c94); ++ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); ++} ++ ++static void __init ar934x_usb_setup(void) ++{ + ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); + udelay(1000); + +@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void + ath79_device_reset_clear(AR934X_RESET_USB_HOST); + udelay(1000); + ++ if (ath79_soc_rev >= 3) ++ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; ++ + ath79_usb_register("ehci-platform", -1, + AR934X_EHCI_BASE, AR934X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void qca955x_usb_reset_notifier(struct platform_device *pdev) ++{ ++ u32 base; ++ ++ switch (pdev->id) { ++ case 0: ++ base = 0x18116c94; ++ break; ++ ++ case 1: ++ base = 0x18116e54; ++ break; ++ ++ default: ++ return; ++ } ++ ++ enable_tx_tx_idp_violation_fix(base); ++ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); ++} ++ + static void __init qca955x_usb_setup(void) + { ++ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; ++ + ath79_usb_register("ehci-platform", 0, + QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, + ATH79_IP3_IRQ(0), diff --git a/trunk/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch b/trunk/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch new file mode 100644 index 00000000..2dec0209 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch @@ -0,0 +1,359 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -20,6 +20,10 @@ + #include + + #define AR71XX_APB_BASE 0x18000000 ++#define AR71XX_GE0_BASE 0x19000000 ++#define AR71XX_GE0_SIZE 0x10000 ++#define AR71XX_GE1_BASE 0x1a000000 ++#define AR71XX_GE1_SIZE 0x10000 + #define AR71XX_EHCI_BASE 0x1b000000 + #define AR71XX_EHCI_SIZE 0x1000 + #define AR71XX_OHCI_BASE 0x1c000000 +@@ -39,6 +43,8 @@ + #define AR71XX_PLL_SIZE 0x100 + #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) + #define AR71XX_RESET_SIZE 0x100 ++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR71XX_MII_SIZE 0x100 + + #define AR71XX_PCI_MEM_BASE 0x10000000 + #define AR71XX_PCI_MEM_SIZE 0x07000000 +@@ -81,15 +87,21 @@ + + #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR933X_UART_SIZE 0x14 ++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR933X_GMAC_SIZE 0x04 + #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR933X_WMAC_SIZE 0x20000 + #define AR933X_EHCI_BASE 0x1b000000 + #define AR933X_EHCI_SIZE 0x1000 + ++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR934X_GMAC_SIZE 0x14 + #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR934X_WMAC_SIZE 0x20000 + #define AR934X_EHCI_BASE 0x1b000000 + #define AR934X_EHCI_SIZE 0x200 ++#define AR934X_NFC_BASE 0x1b000200 ++#define AR934X_NFC_SIZE 0xb8 + #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) + #define AR934X_SRIF_SIZE 0x1000 + +@@ -106,11 +118,15 @@ + #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) + #define QCA955X_PCI_CTRL_SIZE 0x100 + ++#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA955X_GMAC_SIZE 0x40 + #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define QCA955X_WMAC_SIZE 0x20000 + #define QCA955X_EHCI0_BASE 0x1b000000 + #define QCA955X_EHCI1_BASE 0x1b400000 + #define QCA955X_EHCI_SIZE 0x1000 ++#define QCA955X_NFC_BASE 0x1b800200 ++#define QCA955X_NFC_SIZE 0xb8 + + #define AR9300_OTP_BASE 0x14000 + #define AR9300_OTP_STATUS 0x15f18 +@@ -174,6 +190,9 @@ + #define AR71XX_AHB_DIV_SHIFT 20 + #define AR71XX_AHB_DIV_MASK 0x7 + ++#define AR71XX_ETH0_PLL_SHIFT 17 ++#define AR71XX_ETH1_PLL_SHIFT 19 ++ + #define AR724X_PLL_REG_CPU_CONFIG 0x00 + #define AR724X_PLL_REG_PCIE_CONFIG 0x18 + +@@ -186,6 +205,8 @@ + #define AR724X_DDR_DIV_SHIFT 22 + #define AR724X_DDR_DIV_MASK 0x3 + ++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c ++ + #define AR913X_PLL_REG_CPU_CONFIG 0x00 + #define AR913X_PLL_REG_ETH_CONFIG 0x04 + #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 +@@ -198,6 +219,9 @@ + #define AR913X_AHB_DIV_SHIFT 19 + #define AR913X_AHB_DIV_MASK 0x1 + ++#define AR913X_ETH0_PLL_SHIFT 20 ++#define AR913X_ETH1_PLL_SHIFT 22 ++ + #define AR933X_PLL_CPU_CONFIG_REG 0x00 + #define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +@@ -219,6 +243,8 @@ + #define AR934X_PLL_CPU_CONFIG_REG 0x00 + #define AR934X_PLL_DDR_CONFIG_REG 0x04 + #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 ++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 ++#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c + + #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 + #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +@@ -251,9 +277,13 @@ + #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) + #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + ++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) ++ + #define QCA955X_PLL_CPU_CONFIG_REG 0x00 + #define QCA955X_PLL_DDR_CONFIG_REG 0x04 + #define QCA955X_PLL_CLK_CTRL_REG 0x08 ++#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 ++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 + + #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 + #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +@@ -378,16 +408,83 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_RESET_GE1_MDIO BIT(23) ++#define AR933X_RESET_GE0_MDIO BIT(22) ++#define AR933X_RESET_GE1_MAC BIT(13) + #define AR933X_RESET_WMAC BIT(11) ++#define AR933X_RESET_GE0_MAC BIT(9) + #define AR933X_RESET_USB_HOST BIT(5) + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + ++#define AR934X_RESET_HOST BIT(31) ++#define AR934X_RESET_SLIC BIT(30) ++#define AR934X_RESET_HDMA BIT(29) ++#define AR934X_RESET_EXTERNAL BIT(28) ++#define AR934X_RESET_RTC BIT(27) ++#define AR934X_RESET_PCIE_EP_INT BIT(26) ++#define AR934X_RESET_CHKSUM_ACC BIT(25) ++#define AR934X_RESET_FULL_CHIP BIT(24) ++#define AR934X_RESET_GE1_MDIO BIT(23) ++#define AR934X_RESET_GE0_MDIO BIT(22) ++#define AR934X_RESET_CPU_NMI BIT(21) ++#define AR934X_RESET_CPU_COLD BIT(20) ++#define AR934X_RESET_HOST_RESET_INT BIT(19) ++#define AR934X_RESET_PCIE_EP BIT(18) ++#define AR934X_RESET_UART1 BIT(17) ++#define AR934X_RESET_DDR BIT(16) ++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define AR934X_RESET_NANDF BIT(14) ++#define AR934X_RESET_GE1_MAC BIT(13) ++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) + #define AR934X_RESET_USB_PHY_ANALOG BIT(11) ++#define AR934X_RESET_HOST_DMA_INT BIT(10) ++#define AR934X_RESET_GE0_MAC BIT(9) ++#define AR934X_RESET_ETH_SWITCH BIT(8) ++#define AR934X_RESET_PCIE_PHY BIT(7) ++#define AR934X_RESET_PCIE BIT(6) + #define AR934X_RESET_USB_HOST BIT(5) + #define AR934X_RESET_USB_PHY BIT(4) + #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) ++#define AR934X_RESET_LUT BIT(2) ++#define AR934X_RESET_MBOX BIT(1) ++#define AR934X_RESET_I2S BIT(0) ++ ++#define QCA955X_RESET_HOST BIT(31) ++#define QCA955X_RESET_SLIC BIT(30) ++#define QCA955X_RESET_HDMA BIT(29) ++#define QCA955X_RESET_EXTERNAL BIT(28) ++#define QCA955X_RESET_RTC BIT(27) ++#define QCA955X_RESET_PCIE_EP_INT BIT(26) ++#define QCA955X_RESET_CHKSUM_ACC BIT(25) ++#define QCA955X_RESET_FULL_CHIP BIT(24) ++#define QCA955X_RESET_GE1_MDIO BIT(23) ++#define QCA955X_RESET_GE0_MDIO BIT(22) ++#define QCA955X_RESET_CPU_NMI BIT(21) ++#define QCA955X_RESET_CPU_COLD BIT(20) ++#define QCA955X_RESET_HOST_RESET_INT BIT(19) ++#define QCA955X_RESET_PCIE_EP BIT(18) ++#define QCA955X_RESET_UART1 BIT(17) ++#define QCA955X_RESET_DDR BIT(16) ++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define QCA955X_RESET_NANDF BIT(14) ++#define QCA955X_RESET_GE1_MAC BIT(13) ++#define QCA955X_RESET_SGMII_ANALOG BIT(12) ++#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) ++#define QCA955X_RESET_HOST_DMA_INT BIT(10) ++#define QCA955X_RESET_GE0_MAC BIT(9) ++#define QCA955X_RESET_SGMII BIT(8) ++#define QCA955X_RESET_PCIE_PHY BIT(7) ++#define QCA955X_RESET_PCIE BIT(6) ++#define QCA955X_RESET_USB_HOST BIT(5) ++#define QCA955X_RESET_USB_PHY BIT(4) ++#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) ++#define QCA955X_RESET_LUT BIT(2) ++#define QCA955X_RESET_MBOX BIT(1) ++#define QCA955X_RESET_I2S BIT(0) + ++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) ++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +@@ -529,6 +626,12 @@ + #define AR71XX_GPIO_REG_INT_ENABLE 0x24 + #define AR71XX_GPIO_REG_FUNC 0x28 + ++#define AR934X_GPIO_REG_OUT_FUNC0 0x2c ++#define AR934X_GPIO_REG_OUT_FUNC1 0x30 ++#define AR934X_GPIO_REG_OUT_FUNC2 0x34 ++#define AR934X_GPIO_REG_OUT_FUNC3 0x38 ++#define AR934X_GPIO_REG_OUT_FUNC4 0x3c ++#define AR934X_GPIO_REG_OUT_FUNC5 0x40 + #define AR934X_GPIO_REG_FUNC 0x6c + + #define AR71XX_GPIO_COUNT 16 +@@ -560,4 +663,149 @@ + #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 + #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 + ++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) ++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) ++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) ++#define AR71XX_GPIO_FUNC_UART_EN BIT(8) ++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) ++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) ++ ++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) ++#define AR724X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) ++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) ++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) ++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) ++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR724X_GPIO_FUNC_UART_EN BIT(1) ++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) ++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) ++#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) ++#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) ++#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) ++#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) ++#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) ++#define AR913X_GPIO_FUNC_UART_EN BIT(8) ++#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) ++ ++#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) ++#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) ++#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) ++#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) ++#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) ++#define AR933X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR933X_GPIO_FUNC_UART_EN BIT(1) ++#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) ++#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) ++#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) ++#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) ++#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) ++#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) ++#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) ++#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) ++#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) ++ ++#define AR934X_GPIO_OUT_GPIO 0 ++#define AR934X_GPIO_OUT_SPI_CS1 7 ++#define AR934X_GPIO_OUT_LED_LINK0 41 ++#define AR934X_GPIO_OUT_LED_LINK1 42 ++#define AR934X_GPIO_OUT_LED_LINK2 43 ++#define AR934X_GPIO_OUT_LED_LINK3 44 ++#define AR934X_GPIO_OUT_LED_LINK4 45 ++#define AR934X_GPIO_OUT_EXT_LNA0 46 ++#define AR934X_GPIO_OUT_EXT_LNA1 47 ++ ++/* ++ * MII_CTRL block ++ */ ++#define AR71XX_MII_REG_MII0_CTRL 0x00 ++#define AR71XX_MII_REG_MII1_CTRL 0x04 ++ ++#define AR71XX_MII_CTRL_IF_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_SHIFT 4 ++#define AR71XX_MII_CTRL_SPEED_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_10 0 ++#define AR71XX_MII_CTRL_SPEED_100 1 ++#define AR71XX_MII_CTRL_SPEED_1000 2 ++ ++#define AR71XX_MII0_CTRL_IF_GMII 0 ++#define AR71XX_MII0_CTRL_IF_MII 1 ++#define AR71XX_MII0_CTRL_IF_RGMII 2 ++#define AR71XX_MII0_CTRL_IF_RMII 3 ++ ++#define AR71XX_MII1_CTRL_IF_RGMII 0 ++#define AR71XX_MII1_CTRL_IF_RMII 1 ++ ++/* ++ * AR933X GMAC interface ++ */ ++#define AR933X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) ++#define AR933X_ETH_CFG_MII_GE0 BIT(1) ++#define AR933X_ETH_CFG_GMII_GE0 BIT(2) ++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) ++#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) ++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) ++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) ++#define AR933X_ETH_CFG_RMII_GE0 BIT(9) ++#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 ++#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) ++ ++/* ++ * AR934X GMAC Interface ++ */ ++#define AR934X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) ++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) ++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) ++#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) ++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) ++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) ++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) ++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) ++#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) ++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) ++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) ++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) ++#define AR934X_ETH_CFG_RXD_DELAY BIT(14) ++#define AR934X_ETH_CFG_RDV_DELAY BIT(16) ++ ++/* ++ * QCA955X GMAC Interface ++ */ ++ ++#define QCA955X_GMAC_REG_ETH_CFG 0x00 ++ ++#define QCA955X_ETH_CFG_RGMII_EN BIT(0) ++#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) ++ + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch b/trunk/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch new file mode 100644 index 00000000..a772d9b6 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch @@ -0,0 +1,76 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -98,6 +98,20 @@ config SOC_QCA955X + select PCI_AR724X if PCI + def_bool n + ++config ATH79_DEV_M25P80 ++ select ATH79_DEV_SPI ++ def_bool n ++ ++config ATH79_DEV_AP9X_PCI ++ select ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config ATH79_DEV_DSA ++ def_bool n ++ ++config ATH79_DEV_ETH ++ def_bool n ++ + config PCI_AR724X + def_bool n + +@@ -107,6 +121,10 @@ config ATH79_DEV_GPIO_BUTTONS + config ATH79_DEV_LEDS_GPIO + def_bool n + ++config ATH79_DEV_NFC ++ depends on (SOC_AR934X || SOC_QCA955X) ++ def_bool n ++ + config ATH79_DEV_SPI + def_bool n + +@@ -117,4 +135,13 @@ config ATH79_DEV_WMAC + depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) + def_bool n + ++config ATH79_NVRAM ++ def_bool n ++ ++config ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config ATH79_ROUTERBOOT ++ def_bool n ++ + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o + # Devices + # + obj-y += dev-common.o ++obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o ++obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o ++obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o + obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o + obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o ++obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o ++obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o + obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o + obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o + + # ++# Miscellaneous objects ++# ++obj-$(CONFIG_ATH79_NVRAM) += nvram.o ++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o ++obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o ++ ++# + # Machines + # + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o diff --git a/trunk/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch new file mode 100644 index 00000000..b385b9e0 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch @@ -0,0 +1,163 @@ +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -1,19 +1,21 @@ + /* + * Atheros AP121 board support + * +- * Copyright (C) 2011 Gabor Juhos ++ * Copyright (C) 2011-2012 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +-#include "machtypes.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" ++#include "machtypes.h" + + #define AP121_GPIO_LED_WLAN 0 + #define AP121_GPIO_LED_USB 1 +@@ -24,7 +26,14 @@ + #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) + +-#define AP121_CAL_DATA_ADDR 0x1fff1000 ++#define AP121_MAC0_OFFSET 0x0000 ++#define AP121_MAC1_OFFSET 0x0006 ++#define AP121_CALDATA_OFFSET 0x1000 ++#define AP121_WMAC_MAC_OFFSET 0x1002 ++ ++#define AP121_MINI_GPIO_LED_WLAN 0 ++#define AP121_MINI_GPIO_BTN_JUMPSTART 12 ++#define AP121_MINI_GPIO_BTN_RESET 11 + + static struct gpio_led ap121_leds_gpio[] __initdata = { + { +@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi + } + }; + +-static struct ath79_spi_controller_data ap121_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, ++static struct gpio_led ap121_mini_leds_gpio[] __initdata = { ++ { ++ .name = "ap121:green:wlan", ++ .gpio = AP121_MINI_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, + }; + +-static struct spi_board_info ap121_spi_info[] = { ++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { + { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l1606e", +- .controller_data = &ap121_spi0_data, ++ .desc = "jumpstart button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, ++ .active_low = 1, ++ }, ++ { ++ .desc = "reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_RESET, ++ .active_low = 1, + } + }; + +-static struct ath79_spi_platform_data ap121_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; ++static void __init ap121_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_wmac(art + AP121_CALDATA_OFFSET, ++ art + AP121_WMAC_MAC_OFFSET); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ /* LAN ports */ ++ ath79_register_eth(1); ++ ++ /* WAN port */ ++ ath79_register_eth(0); ++} + + static void __init ap121_setup(void) + { +- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); ++ ap121_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_gpio_keys), + ap121_gpio_keys); +- +- ath79_register_spi(&ap121_spi_data, ap121_spi_info, +- ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", + ap121_setup); ++ ++static void __init ap121_mini_setup(void) ++{ ++ ap121_common_setup(); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), ++ ap121_mini_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_mini_gpio_keys), ++ ap121_mini_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", ++ ap121_mini_setup); +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi + config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -17,6 +17,7 @@ + enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, + ATH79_MACH_AP121, /* Atheros AP121 reference board */ ++ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch new file mode 100644 index 00000000..bbfdd49d --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch @@ -0,0 +1,128 @@ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -9,12 +9,16 @@ + * by the Free Software Foundation. + */ + +-#include "machtypes.h" +-#include "dev-wmac.h" ++#include ++#include ++ ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" + #include "dev-usb.h" ++#include "dev-wmac.h" ++#include "machtypes.h" + + #define AP81_GPIO_LED_STATUS 1 + #define AP81_GPIO_LED_AOSS 3 +@@ -29,6 +33,37 @@ + + #define AP81_CAL_DATA_ADDR 0x1fff1000 + ++static struct mtd_partition ap81_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x500000, ++ }, { ++ .name = "uImage", ++ .offset = 0x550000, ++ .size = 0x100000, ++ }, { ++ .name = "ART", ++ .offset = 0x650000, ++ .size = 0x1b0000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++ ++static struct flash_platform_data ap81_flash_data = { ++ .parts = ap81_partitions, ++ .nr_parts = ARRAY_SIZE(ap81_partitions), ++}; ++ + static struct gpio_led ap81_leds_gpio[] __initdata = { + { + .name = "ap81:green:status", +@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio + } + }; + +-static struct ath79_spi_controller_data ap81_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, +-}; +- +-static struct spi_board_info ap81_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "m25p64", +- .controller_data = &ap81_spi0_data, +- } +-}; +- +-static struct ath79_spi_platform_data ap81_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- + static void __init ap81_setup(void) + { + u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); +@@ -96,10 +111,24 @@ static void __init ap81_setup(void) + ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap81_gpio_keys), + ap81_gpio_keys); +- ath79_register_spi(&ap81_spi_data, ap81_spi_info, +- ARRAY_SIZE(ap81_spi_info)); ++ ath79_register_m25p80(&ap81_flash_data); + ath79_register_wmac(cal_data, NULL); + ath79_register_usb(); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0); ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_eth0_data.has_ar8216 = 1; ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ath79_eth1_data.phy_mask = 0x10; ++ ++ ath79_register_eth(0); ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -30,9 +30,10 @@ config ATH79_MACH_AP136 + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" + select SOC_AR913X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/trunk/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch new file mode 100644 index 00000000..b494f930 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch @@ -0,0 +1,209 @@ +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -2,7 +2,7 @@ + * Atheros DB120 reference board support + * + * Copyright (c) 2011 Qualcomm Atheros +- * Copyright (c) 2011 Gabor Juhos ++ * Copyright (c) 2011-2012 Gabor Juhos + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -19,16 +19,26 @@ + */ + + #include ++#include ++#include + #include ++#include + +-#include "machtypes.h" ++#include ++ ++#include "common.h" ++#include "dev-ap9x-pci.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" ++#include "dev-nfc.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + ++#define DB120_GPIO_LED_USB 11 + #define DB120_GPIO_LED_WLAN_5G 12 + #define DB120_GPIO_LED_WLAN_2G 13 + #define DB120_GPIO_LED_STATUS 14 +@@ -39,8 +49,10 @@ + #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ + #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) + +-#define DB120_WMAC_CALDATA_OFFSET 0x1000 +-#define DB120_PCIE_CALDATA_OFFSET 0x5000 ++#define DB120_MAC0_OFFSET 0 ++#define DB120_MAC1_OFFSET 6 ++#define DB120_WMAC_CALDATA_OFFSET 0x1000 ++#define DB120_PCIE_CALDATA_OFFSET 0x5000 + + static struct gpio_led db120_leds_gpio[] __initdata = { + { +@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[] + .gpio = DB120_GPIO_LED_WLAN_2G, + .active_low = 1, + }, ++ { ++ .name = "db120:green:usb", ++ .gpio = DB120_GPIO_LED_USB, ++ .active_low = 1, ++ } + }; + + static struct gpio_keys_button db120_gpio_keys[] __initdata = { +@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi + }, + }; + +-static struct ath79_spi_controller_data db120_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, ++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + }; + +-static struct spi_board_info db120_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "s25sl064a", +- .controller_data = &db120_spi0_data, +- } ++static struct ar8327_led_cfg db120_ar8327_led_cfg = { ++ .led_ctrl0 = 0x00000000, ++ .led_ctrl1 = 0xc737c737, ++ .led_ctrl2 = 0x00000000, ++ .led_ctrl3 = 0x00c30c00, ++ .open_drain = true, + }; + +-static struct ath79_spi_platform_data db120_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, ++static struct ar8327_platform_data db120_ar8327_data = { ++ .pad0_cfg = &db120_ar8327_pad0_cfg, ++ .port0_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++ .led_cfg = &db120_ar8327_led_cfg, + }; + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data db120_ath9k_data; +- +-static int db120_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &db120_ath9k_data; +- break; +- } +- +- return 0; +-} +- +-static void __init db120_pci_init(u8 *eeprom) +-{ +- memcpy(db120_ath9k_data.eeprom_data, eeprom, +- sizeof(db120_ath9k_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void db120_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ ++static struct mdio_board_info db120_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &db120_ar8327_data, ++ }, ++}; + + static void __init db120_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + ++ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); ++ ath79_register_m25p80(NULL); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), + db120_leds_gpio); + ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, + ARRAY_SIZE(db120_gpio_keys), + db120_gpio_keys); +- ath79_register_spi(&db120_spi_data, db120_spi_info, +- ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); + ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); +- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); ++ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | ++ AR934X_ETH_CFG_SW_ONLY_MODE); ++ ++ ath79_register_mdio(1, 0x0); ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); ++ ++ mdiobus_register_board_info(db120_mdio0_info, ++ ARRAY_SIZE(db120_mdio0_info)); ++ ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected to the internal switch */ ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); ++ ++ ath79_register_nfc(); + } + + MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -43,9 +43,12 @@ config ATH79_MACH_AP81 + config ATH79_MACH_DB120 + bool "Atheros DB120 reference board" + select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/trunk/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch new file mode 100644 index 00000000..f9ec7753 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch @@ -0,0 +1,153 @@ +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -8,23 +8,48 @@ + * by the Free Software Foundation. + */ + ++#include + #include + #include + #include + #include + #include ++#include ++#include ++#include + +-#include "machtypes.h" ++#include ++#include ++ ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" ++#include "machtypes.h" + #include "pci.h" + + #define PB44_GPIO_I2C_SCL 0 + #define PB44_GPIO_I2C_SDA 1 + ++#define PB44_PCF8757_VSC7395_CS 0 ++#define PB44_PCF8757_STEREO_CS 1 ++#define PB44_PCF8757_SLIC_CS0 2 ++#define PB44_PCF8757_SLIC_TEST 3 ++#define PB44_PCF8757_SLIC_INT0 4 ++#define PB44_PCF8757_SLIC_INT1 5 ++#define PB44_PCF8757_SW_RESET 6 ++#define PB44_PCF8757_SW_JUMP 8 ++#define PB44_PCF8757_LED_JUMP1 9 ++#define PB44_PCF8757_LED_JUMP2 10 ++#define PB44_PCF8757_TP24 11 ++#define PB44_PCF8757_TP25 12 ++#define PB44_PCF8757_TP26 13 ++#define PB44_PCF8757_TP27 14 ++#define PB44_PCF8757_TP28 15 ++ + #define PB44_GPIO_EXP_BASE 16 ++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) + #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) + #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) + #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) +@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data + .cs_line = 0, + }; + ++static struct ath79_spi_controller_data pb44_spi1_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_GPIO, ++ .cs_line = PB44_GPIO_VSC7395_CS, ++}; ++ ++static void pb44_vsc7395_reset(void) ++{ ++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); ++ udelay(10); ++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); ++ mdelay(50); ++} ++ ++static struct vsc7385_platform_data pb44_vsc7395_data = { ++ .reset = pb44_vsc7395_reset, ++ .ucode_name = "vsc7395_ucode_pb44.bin", ++ .mac_cfg = { ++ .tx_ipg = 6, ++ .bit2 = 1, ++ .clk_sel = 0, ++ }, ++}; ++ ++static const char *pb44_part_probes[] = { ++ "RedBoot", ++ NULL, ++}; ++ ++static struct flash_platform_data pb44_flash_data = { ++ .part_probes = pb44_part_probes, ++}; ++ + static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .platform_data = &pb44_flash_data, + .controller_data = &pb44_spi0_data, + }, ++ { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-vsc7385", ++ .platform_data = &pb44_vsc7395_data, ++ .controller_data = &pb44_spi1_data, ++ } + }; + + static struct ath79_spi_platform_data pb44_spi_data = { + .bus_num = 0, +- .num_chipselect = 1, ++ .num_chipselect = 2, + }; + ++#define PB44_WAN_PHYMASK BIT(0) ++#define PB44_LAN_PHYMASK 0 ++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) ++ + static void __init pb44_init(void) + { + i2c_register_board_info(0, pb44_i2c_board_info, +@@ -122,6 +192,22 @@ static void __init pb44_init(void) + ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); + ath79_register_pci(); ++ ++ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; ++ ++ ath79_register_eth(0); ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ath79_eth1_pll_data.pll_1000 = 0x110000; ++ ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -58,6 +58,7 @@ config ATH79_MACH_DB120 + config ATH79_MACH_PB44 + bool "Atheros PB44 reference board" + select SOC_AR71XX ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI diff --git a/trunk/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch new file mode 100644 index 00000000..cbbe20b4 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch @@ -0,0 +1,109 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -70,9 +70,10 @@ config ATH79_MACH_PB44 + config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -16,10 +16,11 @@ + + #include + +-#include "machtypes.h" ++#include "dev-ap9x-pci.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" ++#include "machtypes.h" + #include "pci.h" + + #define UBNT_XM_GPIO_LED_L1 0 +@@ -32,7 +33,7 @@ + #define UBNT_XM_KEYS_POLL_INTERVAL 20 + #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) + +-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) ++#define UBNT_XM_EEPROM_ADDR 0x1fff1000 + + static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { +@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + +-static struct ath79_spi_controller_data ubnt_xm_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, +-}; +- +-static struct spi_board_info ubnt_xm_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- .controller_data = &ubnt_xm_spi0_data, +- } +-}; +- +-static struct ath79_spi_platform_data ubnt_xm_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ubnt_xm_eeprom_data; +- +-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &ubnt_xm_eeprom_data; +- break; +- } +- +- return 0; +-} +- +-static void __init ubnt_xm_pci_init(void) +-{ +- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, +- sizeof(ubnt_xm_eeprom_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void ubnt_xm_pci_init(void) {} +-#endif /* CONFIG_PCI */ +- + static void __init ubnt_xm_init(void) + { ++ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); + +@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void) + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + +- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, +- ARRAY_SIZE(ubnt_xm_spi_info)); +- +- ubnt_xm_pci_init(); ++ ath79_register_m25p80(NULL); ++ ap91_pci_init(eeprom, NULL); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/trunk/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/trunk/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch new file mode 100644 index 00000000..78035131 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -0,0 +1,531 @@ +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -12,16 +12,24 @@ + + #include + #include ++#include + #include ++#include ++#include + ++#include + #include ++#include + ++#include "common.h" + #include "dev-ap9x-pci.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-m25p80.h" ++#include "dev-usb.h" ++#include "dev-wmac.h" + #include "machtypes.h" +-#include "pci.h" + + #define UBNT_XM_GPIO_LED_L1 0 + #define UBNT_XM_GPIO_LED_L2 1 +@@ -37,19 +45,19 @@ + + static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { +- .name = "ubnt-xm:red:link1", ++ .name = "ubnt:red:link1", + .gpio = UBNT_XM_GPIO_LED_L1, + .active_low = 0, + }, { +- .name = "ubnt-xm:orange:link2", ++ .name = "ubnt:orange:link2", + .gpio = UBNT_XM_GPIO_LED_L2, + .active_low = 0, + }, { +- .name = "ubnt-xm:green:link3", ++ .name = "ubnt:green:link3", + .gpio = UBNT_XM_GPIO_LED_L3, + .active_low = 0, + }, { +- .name = "ubnt-xm:green:link4", ++ .name = "ubnt:green:link4", + .gpio = UBNT_XM_GPIO_LED_L4, + .active_low = 0, + }, +@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + ++#define UBNT_M_WAN_PHYMASK BIT(4) ++ + static void __init ubnt_xm_init(void) + { + u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); +@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void) + + ath79_register_m25p80(NULL); + ap91_pci_init(eeprom, NULL); ++ ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); ++ ath79_register_eth(0); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, + "UBNT-XM", + "Ubiquiti Networks XM (rev 1.0) board", + ubnt_xm_init); ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", ++ ubnt_xm_init); ++ ++static void __init ubnt_rocket_m_setup(void) ++{ ++ ubnt_xm_init(); ++ ath79_register_usb(); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", ++ ubnt_rocket_m_setup); ++ ++static void __init ubnt_nano_m_setup(void) ++{ ++ ubnt_xm_init(); ++ ath79_register_eth(1); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", ++ ubnt_nano_m_setup); ++ ++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:green:globe", ++ .gpio = 0, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:power", ++ .gpio = 11, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_ON, ++ } ++}; ++ ++static void __init ubnt_airrouter_setup(void) ++{ ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); ++ ++ ath79_register_eth(1); ++ ath79_register_eth(0); ++ ath79_register_usb(); ++ ++ ap91_pci_init(ee, NULL); ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), ++ ubnt_airrouter_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", ++ ubnt_airrouter_setup); ++ ++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:orange:dome", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:dome", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; ++ ++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:orange:front", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:front", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; ++ ++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:white:front", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:blue:front", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; ++ ++ ++static void __init ubnt_unifi_setup(void) ++{ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ++ ath79_register_eth(0); ++ ++ ap91_pci_init(ee, NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), ++ ubnt_unifi_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", ++ ubnt_unifi_setup); ++ ++ ++#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) ++#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) ++ ++static void __init ubnt_unifi_outdoor_setup(void) ++{ ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | ++ UBNT_UNIFIOD_2ND_PHYMASK)); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); ++ ath79_register_eth(0); ++ ath79_register_eth(1); ++ ++ ap91_pci_init(ee, NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), ++ ubnt_unifi_outdoor_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", ++ "Ubiquiti UniFiAP Outdoor", ++ ubnt_unifi_outdoor_setup); ++ ++ ++static void __init ubnt_unifi_outdoor_plus_setup(void) ++{ ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | ++ UBNT_UNIFIOD_2ND_PHYMASK)); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); ++ ath79_register_eth(0); ++ ath79_register_eth(1); ++ ++ ap91_pci_init(ee, NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), ++ ubnt_unifi_outdoor_plus_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", ++ "Ubiquiti UniFiAP Outdoor+", ++ ubnt_unifi_outdoor_plus_setup); ++ ++ ++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { ++ { ++ .name = "ubnt:white:dome", ++ .gpio = 12, ++ }, { ++ .name = "ubnt:blue:dome", ++ .gpio = 13, ++ } ++}; ++ ++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 17, ++ .active_low = 1, ++ } ++}; ++ ++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, ++}; ++ ++static struct ar8327_platform_data uap_pro_ar8327_data = { ++ .pad0_cfg = &uap_pro_ar8327_pad0_cfg, ++ .port0_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++}; ++ ++static struct mdio_board_info uap_pro_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &uap_pro_ar8327_data, ++ }, ++}; ++ ++#define UAP_PRO_MAC0_OFFSET 0x0000 ++#define UAP_PRO_MAC1_OFFSET 0x0006 ++#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 ++#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 ++ ++static void __init ubnt_uap_pro_setup(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), ++ ubnt_uap_pro_gpio_leds); ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(uap_pro_gpio_keys), ++ uap_pro_gpio_keys); ++ ++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); ++ ++ ath79_register_mdio(0, 0x0); ++ mdiobus_register_board_info(uap_pro_mdio0_info, ++ ARRAY_SIZE(uap_pro_mdio0_info)); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ eeprom + UAP_PRO_MAC0_OFFSET, 0); ++ ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", ++ ubnt_uap_pro_setup); ++ ++#define UBNT_XW_GPIO_LED_L1 11 ++#define UBNT_XW_GPIO_LED_L2 16 ++#define UBNT_XW_GPIO_LED_L3 13 ++#define UBNT_XW_GPIO_LED_L4 14 ++ ++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:red:link1", ++ .gpio = UBNT_XW_GPIO_LED_L1, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:orange:link2", ++ .gpio = UBNT_XW_GPIO_LED_L2, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link3", ++ .gpio = UBNT_XW_GPIO_LED_L3, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link4", ++ .gpio = UBNT_XW_GPIO_LED_L4, ++ .active_low = 1, ++ }, ++}; ++ ++static void __init ubnt_xw_init(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), ++ ubnt_xw_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++ ++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); ++ ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ eeprom + UAP_PRO_MAC0_OFFSET, 0); ++ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++} ++ ++static void __init ubnt_nano_m_xw_setup(void) ++{ ++ ubnt_xw_init(); ++ ++ /* GMAC0 is connected to an AR8326 switch */ ++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); ++ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_register_eth(0); ++} ++ ++static void __init ubnt_loco_m_xw_setup(void) ++{ ++ ubnt_xw_init(); ++ ++ ath79_register_mdio(0, ~BIT(1)); ++ ath79_eth0_data.phy_mask = BIT(1); ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", ++ ubnt_nano_m_xw_setup); ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", ++ ubnt_loco_m_xw_setup); ++ ++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { ++ { ++ .name = "ubnt:blue:wlan", ++ .gpio = 0, ++ }, { ++ .name = "ubnt:white:status", ++ .gpio = 1, ++ }, ++}; ++ ++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 12, ++ .active_low = 1, ++ } ++}; ++ ++static void __init ubnt_airgateway_setup(void) ++{ ++ u32 t; ++ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ++ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; ++ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), ++ ubnt_airgateway_gpio_leds); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(airgateway_gpio_keys), ++ airgateway_gpio_keys); ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_register_eth(1); ++ ath79_register_eth(0); ++ ++ ath79_register_wmac(ee, NULL); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", ++ ubnt_airgateway_setup); ++ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -68,12 +68,16 @@ config ATH79_MACH_PB44 + Atheros PB44 reference board. + + config ATH79_MACH_UBNT_XM +- bool "Ubiquiti Networks XM (rev 1.0) board" ++ bool "Ubiquiti Networks XM/UniFi boards" + select SOC_AR724X ++ select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -22,6 +22,13 @@ enum ath79_mach_type { + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ ++ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ ++ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ ++ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ + }; + diff --git a/trunk/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch b/trunk/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch new file mode 100644 index 00000000..ef0ae9a3 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch @@ -0,0 +1,316 @@ +--- a/arch/mips/ath79/mach-ap136.c ++++ b/arch/mips/ath79/mach-ap136.c +@@ -18,23 +18,29 @@ + * + */ + +-#include +-#include ++#include ++#include + +-#include "machtypes.h" ++#include ++ ++#include "common.h" ++#include "pci.h" ++#include "dev-ap9x-pci.h" + #include "dev-gpio-buttons.h" ++#include "dev-eth.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" ++#include "dev-nfc.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + +-#define AP136_GPIO_LED_STATUS_RED 14 +-#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_USB 4 +-#define AP136_GPIO_LED_WLAN_2G 13 + #define AP136_GPIO_LED_WLAN_5G 12 ++#define AP136_GPIO_LED_WLAN_2G 13 ++#define AP136_GPIO_LED_STATUS_RED 14 + #define AP136_GPIO_LED_WPS_RED 15 ++#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_WPS_GREEN 20 + + #define AP136_GPIO_BTN_WPS 16 +@@ -43,37 +49,39 @@ + #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) + +-#define AP136_WMAC_CALDATA_OFFSET 0x1000 +-#define AP136_PCIE_CALDATA_OFFSET 0x5000 ++#define AP136_MAC0_OFFSET 0 ++#define AP136_MAC1_OFFSET 6 ++#define AP136_WMAC_CALDATA_OFFSET 0x1000 ++#define AP136_PCIE_CALDATA_OFFSET 0x5000 + + static struct gpio_led ap136_leds_gpio[] __initdata = { + { +- .name = "qca:green:status", ++ .name = "ap136:green:status", + .gpio = AP136_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, + { +- .name = "qca:red:status", ++ .name = "ap136:red:status", + .gpio = AP136_GPIO_LED_STATUS_RED, + .active_low = 1, + }, + { +- .name = "qca:green:wps", ++ .name = "ap136:green:wps", + .gpio = AP136_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, + { +- .name = "qca:red:wps", ++ .name = "ap136:red:wps", + .gpio = AP136_GPIO_LED_WPS_RED, + .active_low = 1, + }, + { +- .name = "qca:red:wlan-2g", ++ .name = "ap136:red:wlan-2g", + .gpio = AP136_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { +- .name = "qca:red:usb", ++ .name = "ap136:red:usb", + .gpio = AP136_GPIO_LED_USB, + .active_low = 1, + } +@@ -98,65 +106,151 @@ static struct gpio_keys_button ap136_gpi + }, + }; + +-static struct ath79_spi_controller_data ap136_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, ++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; ++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; ++ ++static struct ar8327_platform_data ap136_ar8327_data = { ++ .pad0_cfg = &ap136_ar8327_pad0_cfg, ++ .pad6_cfg = &ap136_ar8327_pad6_cfg, ++ .port0_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++ .port6_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, + }; + +-static struct spi_board_info ap136_spi_info[] = { ++static struct mdio_board_info ap136_mdio0_info[] = { + { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- .controller_data = &ap136_spi0_data, +- } ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &ap136_ar8327_data, ++ }, + }; + +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; ++static void __init ap136_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), ++ ap136_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap136_gpio_keys), ++ ap136_gpio_keys); ++ ++ ath79_register_usb(); ++ ath79_register_nfc(); ++ ++ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); ++ ++ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; ++ ath79_register_mdio(0, 0x0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); + +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) ++ mdiobus_register_board_info(ap136_mdio0_info, ++ ARRAY_SIZE(ap136_mdio0_info)); ++ ++ /* GMAC0 is connected to the RMGII interface */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected tot eh SGMII interface */ ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); ++} ++ ++static void __init ap136_010_setup(void) + { +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +- return 0; ++ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad0_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; ++ ++ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; ++ ++ ath79_eth0_pll_data.pll_1000 = 0xa6000000; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; ++ ++ ap136_common_setup(); ++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); + } + +-static void __init ap136_pci_init(u8 *eeprom) ++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", ++ "Atheros AP136-010 reference board", ++ ap136_010_setup); ++ ++static void __init ap136_020_common_setup(void) + { +- memcpy(ap136_ath9k_data.eeprom_data, eeprom, +- sizeof(ap136_ath9k_data.eeprom_data)); ++ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; ++ ++ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad6_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; + +- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); +- ath79_register_pci(); ++ ath79_eth0_pll_data.pll_1000 = 0x56000000; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; ++ ++ ap136_common_setup(); + } +-#else +-static inline void ap136_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ + +-static void __init ap136_setup(void) ++static void __init ap136_020_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), +- ap136_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap136_gpio_keys), +- ap136_gpio_keys); +- ath79_register_spi(&ap136_spi_data, ap136_spi_info, +- ARRAY_SIZE(ap136_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); +- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); ++ ap136_020_common_setup(); ++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); + } + +-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", +- "Atheros AP136-010 reference board", +- ap136_setup); ++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", ++ "Atheros AP136-020 reference board", ++ ap136_020_setup); ++ ++/* ++ * AP135-020 is similar to AP136-020, any future AP135 specific init ++ * code can be added here. ++ */ ++static void __init ap135_020_setup(void) ++{ ++ ap136_leds_gpio[0].name = "ap135:green:status"; ++ ap136_leds_gpio[1].name = "ap135:red:status"; ++ ap136_leds_gpio[2].name = "ap135:green:wps"; ++ ap136_leds_gpio[3].name = "ap135:red:wps"; ++ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; ++ ap136_leds_gpio[5].name = "ap135:red:usb"; ++ ++ ap136_020_common_setup(); ++ ath79_register_pci(); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", ++ "Atheros AP135-020 reference board", ++ ap135_020_setup); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -18,7 +18,9 @@ enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ ++ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ ++ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -16,16 +16,17 @@ config ATH79_MACH_AP121 + Atheros AP121 reference board. + + config ATH79_MACH_AP136 +- bool "Atheros AP136 reference board" ++ bool "Atheros AP136/AP135 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_NFC + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the +- Atheros AP136 reference board. ++ Atheros AP136 or AP135 reference boards. + + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" diff --git a/trunk/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/trunk/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch new file mode 100644 index 00000000..2aca064e --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch @@ -0,0 +1,1530 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -16,22 +16,190 @@ + + enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, ++ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ ++ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ ++ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ ++ ATH79_MACH_ALL0305, /* Allnet ALL0305 */ ++ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ ++ ATH79_MACH_AP113, /* Atheros AP113 reference board */ + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ ++ ATH79_MACH_AP132, /* Atheros AP132 reference board */ + ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ + ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ ++ ATH79_MACH_AP83, /* Atheros AP83 */ ++ ATH79_MACH_AP96, /* Atheros AP96 */ ++ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ ++ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ ++ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ ++ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ ++ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ ++ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ ++ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ ++ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ ++ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ ++ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ ++ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */ ++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ ++ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ ++ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ ++ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ ++ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ ++ ATH79_MACH_ESR900, /* EnGenius ESR900 */ ++ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ ++ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ++ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ ++ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ ++ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ ++ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ ++ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ++ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ ++ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ ++ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ ++ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ ++ ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ++ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ ++ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ ++ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ ++ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ ++ ATH79_MACH_MR600, /* OpenMesh MR600 */ ++ ATH79_MACH_MR900, /* OpenMesh MR900 */ ++ ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */ ++ ATH79_MACH_MYNET_N600, /* WD My Net N600 */ ++ ATH79_MACH_MYNET_N750, /* WD My Net N750 */ ++ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ ++ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ ++ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ ++ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ ++ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ ++ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ ++ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ ++ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ ++ ATH79_MACH_OM2P, /* OpenMesh OM2P */ ++ ATH79_MACH_OM5P, /* OpenMesh OM5P */ ++ ATH79_MACH_PB42, /* Atheros PB42 */ ++ ATH79_MACH_PB92, /* Atheros PB92 */ ++ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ ++ ATH79_MACH_R6100, /* NETGEAR R6100 */ ++ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ ++ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ ++ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ ++ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ ++ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ ++ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ ++ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ ++ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ ++ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ ++ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ ++ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ ++ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ ++ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ ++ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ ++ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ ++ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ ++ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ ++ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ ++ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ ++ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ ++ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ++ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ++ ATH79_MACH_RW2458N, /* Redwave RW2458N */ ++ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ ++ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ++ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ ++ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ ++ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ ++ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ ++ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ ++ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ ++ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ ++ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ ++ ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */ ++ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ ++ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ ++ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ ++ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ ++ ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ ++ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ ++ ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ ++ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ ++ ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ ++ ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */ ++ ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ ++ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ ++ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ ++ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ ++ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ ++ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ ++ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ ++ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ ++ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ ++ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ ++ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ ++ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ ++ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */ ++ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */ ++ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ ++ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ ++ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ ++ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ ++ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ ++ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ ++ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ ++ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ ++ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ ++ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ ++ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ + ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ + ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ ++ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ ++ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ + ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ + ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ ++ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ + ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ + ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ + ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ ++ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ ++ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ ++ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ ++ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ ++ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ ++ ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */ ++ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ ++ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ ++ ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */ ++ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ ++ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ ++ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ ++ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ ++ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ ++ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ ++ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ ++ ATH79_MACH_WP543, /* Compex WP543 */ ++ ATH79_MACH_WPE72, /* Compex WPE72 */ ++ ATH79_MACH_WPJ558, /* Compex WPJ558 */ ++ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ ++ ATH79_MACH_WRT400N, /* Linksys WRT400N */ ++ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ ++ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ++ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ ++ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ ++ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ ++ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ ++ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ + }; + + #endif /* _ATH79_MACHTYPE_H */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -2,6 +2,70 @@ if ATH79 + + menu "Atheros AR71XX/AR724X/AR913X machine selection" + ++config ATH79_MACH_ALFA_AP96 ++ bool "ALFA Network AP96 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_HORNET_UB ++ bool "ALFA Network Hornet-UB board support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_ALFA_NX ++ bool "ALFA Network N2/N5 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TUBE2H ++ bool "ALFA Network Tube2H board support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_ALL0258N ++ bool "Allnet ALL0258N support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_ALL0315N ++ bool "Allnet ALL0315N support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_AP113 ++ bool "Atheros AP113 board support" ++ select SOC_AR724X ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_PB9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ select ATH79_DEV_ETH ++ + config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X +@@ -11,62 +75,976 @@ config ATH79_MACH_AP121 + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP121 reference board. ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP121 reference board. ++ ++config ATH79_MACH_AP132 ++ bool "Atheros AP132 reference board" ++ select SOC_QCA955X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP132 reference boards. ++ ++config ATH79_MACH_AP136 ++ bool "Atheros AP136/AP135 reference board" ++ select SOC_QCA955X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_NFC ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP136 or AP135 reference boards. ++ ++config ATH79_MACH_AP81 ++ bool "Atheros AP81 reference board" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP81 reference board. ++ ++config ATH79_MACH_AP83 ++ bool "Atheros AP83 board support" ++ select SOC_AR913X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_AP96 ++ bool "Atheros AP96 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_DB120 ++ bool "Atheros DB120 reference board" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros DB120 reference board. ++ ++config ATH79_MACH_PB42 ++ bool "Atheros PB42 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_PB44 ++ bool "Atheros PB44 reference board" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros PB44 reference board. ++ ++config ATH79_MACH_PB92 ++ bool "Atheros PB92 board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_PB9X_PCI if PCI ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_AW_NR580 ++ bool "AzureWave AW-NR580 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_F9K1115V2 ++ bool "Belkin AC1750DB board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_ESR1750 ++ bool "EnGenius ESR1750 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WHR_HP_G300N ++ bool "Buffalo WHR-HP-G300N board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_WLAE_AG300N ++ bool "Buffalo WLAE-AG300N board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_WLR8100 ++ bool "Sitecom WLR-8100 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WZR_HP_AG300H ++ bool "Buffalo WZR-HP-AG300H board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WZR_HP_G300NH ++ bool "Buffalo WZR-HP-G300NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ select RTL8366_SMI ++ ++config ATH79_MACH_WZR_HP_G300NH2 ++ bool "Buffalo WZR-HP-G300NH2 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WZR_HP_G450H ++ bool "Buffalo WZR-HP-G450H board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WZR_450HP2 ++ bool "Buffalo WZR-450HP2 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WP543 ++ bool "Compex WP543/WPJ543 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select MYLOADER ++ ++config ATH79_MACH_WPE72 ++ bool "Compex WPE72/WPE72NX board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select MYLOADER ++ ++config ATH79_MACH_WPJ558 ++ bool "Compex WPJ558 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_DGL_5500_A1 ++ bool "D-Link DGL-5500 A1 support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_DHP_1565_A1 ++ bool "D-Link DHP-1565 rev. A1 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_DIR_505_A1 ++ bool "D-Link DIR-505-A1 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_DIR_600_A1 ++ bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_NVRAM ++ ++config ATH79_MACH_DIR_615_C1 ++ bool "D-Link DIR-615 rev. C1 support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_DIR_825_B1 ++ bool "D-Link DIR-825 rev. B1 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_DIR_825_C1 ++ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_DRAGINO2 ++ bool "DRAGINO V2 support" ++ select SOC_AR933X ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_ETH ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_ESR900 ++ bool "EnGenius ESR900 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_EW_DORIN ++ bool "embedded wireless Dorin Platform support" ++ select SOC_AR933X ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_ETH ++ help ++ Say 'Y' here if you want your kernel to support the ++ Dorin Platform from www.80211.de . ++ ++config ATH79_MACH_EL_M150 ++ bool "EasyLink EL-M150 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_EL_MINI ++ bool "EasyLink EL-MINI support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_GL_INET ++ bool "GL-INET support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_EAP300V2 ++ bool "EnGenius EAP300 v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_GS_OOLITE ++ bool "GS Oolite V1 support" ++ select SOC_AR933X ++ select ARH79_DEV_ETH ++ select ARH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_HIWIFI_HC6361 ++ bool "HiWiFi HC6361 board support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_JA76PF ++ bool "jjPlus JA76PF board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_JWAP003 ++ bool "jjPlus JWAP003 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WRT160NL ++ bool "Linksys WRT160NL board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_WRT400N ++ bool "Linksys WRT400N board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_R6100 ++ bool "NETGEAR R6100 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_RB4XX ++ bool "MikroTik RouterBOARD 4xx series support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_RB750 ++ bool "MikroTik RouterBOARD 750 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_USB ++ select ATH79_ROUTERBOOT ++ ++config ATH79_MACH_RB91X ++ bool "MikroTik RouterBOARD 91X support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_SPI ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_ROUTERBOOT ++ ++config ATH79_MACH_RB95X ++ bool "MikroTik RouterBOARD 95X support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_NFC ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_ROUTERBOOT ++ ++config ATH79_MACH_RB2011 ++ bool "MikroTik RouterBOARD 2011 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ select ATH79_ROUTERBOOT ++ ++config ATH79_MACH_RBSXTLITE ++ bool "MikroTik RouterBOARD SXT Lite" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_NFC ++ select ATH79_DEV_WMAC ++ select ATH79_ROUTERBOOT ++ ++config ATH79_MACH_SMART_300 ++ bool "NC-LINK SMART-300 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WNDAP360 ++ bool "NETGEAR WNDAP360 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_WNDR3700 ++ bool "NETGEAR WNDR3700 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WNDR4300 ++ bool "NETGEAR WNDR3700v4/WNDR4300 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WNR2000 ++ bool "NETGEAR WNR2000 board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_WNR2000_V3 ++ bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++ config ATH79_MACH_WNR2200 ++ bool "NETGEAR WNR2200 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WNR2000_V4 ++ bool "NETGEAR WNR2000 V4" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_OM2P ++ bool "OpenMesh OM2P board support" ++ select SOC_AR724X ++ select SOC_AR933X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_OM5P ++ bool "OpenMesh OM5P board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_MR600 ++ bool "OpenMesh MR600 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_MZK_W04NU ++ bool "Planex MZK-W04NU board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_MZK_W300NH ++ bool "Planex MZK-W300NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_RW2458N ++ bool "Redwave RW2458N board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_CAP4200AG ++ bool "Senao CAP4200AG support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_MR900 ++ bool "OpenMesh MR900 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_EAP7660D ++ bool "Senao EAP7660D support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_ARCHER_C7 ++ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_CPE510 ++ bool "TP-LINK CPE510 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_MR11U ++ bool "TP-LINK TL-MR11U/TL-MR3040 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_MR13U ++ bool "TP-LINK TL-MR13U support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_MR3020 ++ bool "TP-LINK TL-MR3020 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_MR3X20 ++ bool "TP-LINK TL-MR3220/3420 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_TL_WAX50RE ++ bool "TP-LINK TL-WA750/850RE support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WA701ND_V2 ++ bool "TP-LINK TL-WA701ND v2 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + +-config ATH79_MACH_AP136 +- bool "Atheros AP136/AP135 reference board" +- select SOC_QCA955X ++config ATH79_MACH_TL_WA7210N_V2 ++ bool "TP-LINK TL-WA7210N v2 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WA830RE_V2 ++ bool "TP-LINK TL-WA830RE v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_NFC +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP136 or AP135 reference boards. + +-config ATH79_MACH_AP81 +- bool "Atheros AP81 reference board" ++config ATH79_MACH_TL_WA901ND ++ bool "TP-LINK TL-WA901ND/TL-WA7510N support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WA901ND_V2 ++ bool "TP-LINK TL-WA901ND v2 support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WDR3500 ++ bool "TP-LINK TL-WDR3500 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP81 reference board. + +-config ATH79_MACH_DB120 +- bool "Atheros DB120 reference board" ++config ATH79_MACH_TL_WDR4300 ++ bool "TP-LINK TL-WDR3600/4300/4310 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 +- select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros DB120 reference board. + +-config ATH79_MACH_PB44 +- bool "Atheros PB44 reference board" ++config ATH79_MACH_TL_WR703N ++ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR720N_V3 ++ bool "TP-LINK TL-WR720N v3 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR741ND ++ bool "TP-LINK TL-WR741ND support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WR741ND_V4 ++ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR841N_V1 ++ bool "TP-LINK TL-WR841N v1 support" + select SOC_AR71XX ++ select ATH79_DEV_DSA + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WR841N_V8 ++ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR841N_V9 ++ bool "TP-LINK TL-WR841N/ND v9 support" ++ select SOC_QCA953X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR941ND ++ bool "TP-LINK TL-WR941ND support" ++ select SOC_AR913X ++ select ATH79_DEV_DSA ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR1041N_V2 ++ bool "TP-LINK TL-WR1041N v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR1043ND ++ bool "TP-LINK TL-WR1043ND support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR1043ND_V2 ++ bool "TP-LINK TL-WR1043ND v2 support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR2543N ++ bool "TP-LINK TL-WR2543N/ND support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_TEW_632BRP ++ bool "TRENDnet TEW-632BRP support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_TEW_673GRU ++ bool "TRENDnet TEW-673GRU support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_NVRAM ++ ++config ATH79_MACH_TEW_712BR ++ bool "TRENDnet TEW-712BR support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_TEW_732BR ++ bool "TRENDnet TEW-732BR support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_UBNT ++ bool "Ubiquiti AR71xx based boards support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB +- help +- Say 'Y' here if you want your kernel to support the +- Atheros PB44 reference board. + + config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM/UniFi boards" +@@ -83,6 +1061,97 @@ config ATH79_MACH_UBNT_XM + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. + ++config ATH79_MACH_MYNET_N600 ++ bool "WD My Net N600 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_MYNET_N750 ++ bool "WD My Net N750 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_MYNET_REXT ++ bool "WD My Net Wi-Fi Range Extender board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_ZCN_1523H ++ bool "Zcomax ZCN-1523H support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_NBG460N ++ bool "Zyxel NBG460N/550N/550NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_NBG6716 ++ bool "Zyxel NBG6716 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_CARAMBOLA2 ++ bool "8devices Carambola2 board" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_BHU_BXU2000N2_A ++ bool "BHU BXU2000n-2 rev. A support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_QIHOO_C301 ++ bool "Qihoo 360 C301 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_NVRAM ++ + endmenu + + config SOC_AR71XX +@@ -124,7 +1193,10 @@ config ATH79_DEV_DSA + config ATH79_DEV_ETH + def_bool n + +-config PCI_AR724X ++config ATH79_DEV_DSA ++ def_bool n ++ ++config ATH79_DEV_ETH + def_bool n + + config ATH79_DEV_GPIO_BUTTONS +@@ -154,6 +1226,11 @@ config ATH79_PCI_ATH9K_FIXUP + def_bool n + + config ATH79_ROUTERBOOT ++ select RLE_DECOMPRESS ++ select LZO_DECOMPRESS ++ def_bool n ++ ++config PCI_AR724X + def_bool n + + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route + # + # Machines + # ++obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o ++obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o ++obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o ++obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o ++obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o ++obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o + obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o + obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o ++obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o ++obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o ++obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o ++obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o ++obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o ++obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o ++obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o ++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o ++obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o ++obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o ++obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o ++obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o ++obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o ++obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o ++obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o ++obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o ++obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o ++obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o ++obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o ++obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o ++obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o ++obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o ++obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o ++obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o ++obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o ++obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o ++obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o ++obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o ++obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o ++obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o ++obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o ++obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o ++obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o ++obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o ++obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o ++obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o ++obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o ++obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o ++obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o ++obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o ++obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o ++obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o ++obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o ++obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o ++obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o ++obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o ++obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o ++obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o ++obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o ++obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o ++obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o ++obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o ++obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o ++obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o ++obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o ++obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o ++obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o ++obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o ++obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o ++obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o ++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o ++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o ++obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o ++obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o ++obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o + obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o ++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o ++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o ++obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o ++obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o ++obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o ++obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o ++obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o ++obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o ++obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o ++obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o ++obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o ++obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o ++obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o ++obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o ++obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o ++obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o ++obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o ++obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o ++obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -180,6 +180,12 @@ void __init prom_init(void) + ath79_prom_append_cmdline("board", env); + } + } ++ ++ if (strstr(arcs_cmdline, "board=750Gr3") || ++ strstr(arcs_cmdline, "board=951G") || ++ strstr(arcs_cmdline, "board=2011L") || ++ strstr(arcs_cmdline, "board=711Gr100")) ++ ath79_prom_append_cmdline("console", "ttyS0,115200"); + } + + void __init prom_free_prom_memory(void) diff --git a/trunk/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch b/trunk/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch new file mode 100644 index 00000000..7a70ac3f --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch @@ -0,0 +1,25 @@ +MIPS: ath79: fix maximum timeout + +If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout. + +Signed-off-by: John Crispin + +--- a/drivers/watchdog/ath79_wdt.c ++++ b/drivers/watchdog/ath79_wdt.c +@@ -114,10 +114,14 @@ static inline void ath79_wdt_disable(voi + + static int ath79_wdt_set_timeout(int val) + { +- if (val < 1 || val > max_timeout) ++ if (val < 1) + return -EINVAL; + +- timeout = val; ++ if (val > max_timeout) ++ timeout = max_timeout; ++ else ++ timeout = val; ++ + ath79_wdt_keepalive(); + + return 0; diff --git a/trunk/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch b/trunk/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch new file mode 100644 index 00000000..fdef854f --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch @@ -0,0 +1,24 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -306,6 +306,11 @@ void __init ath79_wmac_disable_5ghz(void + ath79_wmac_data.disable_5ghz = true; + } + ++void __init ath79_wmac_set_tx_gain_buffalo(void) ++{ ++ ath79_wmac_data.tx_gain_buffalo = true; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u + void ath79_register_wmac_simple(void); + void ath79_wmac_disable_2ghz(void); + void ath79_wmac_disable_5ghz(void); ++void ath79_wmac_set_tx_gain_buffalo(void); + + bool ar93xx_wmac_read_mac_address(u8 *dest); + diff --git a/trunk/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/trunk/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch new file mode 100644 index 00000000..83de7b12 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch @@ -0,0 +1,76 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -18,9 +18,11 @@ + #include + #include + #include ++#include + + #include + #include ++#include "common.h" + #include "dev-wmac.h" + + static u8 ath79_wmac_mac[ETH_ALEN]; +@@ -311,6 +313,51 @@ void __init ath79_wmac_set_tx_gain_buffa + ath79_wmac_data.tx_gain_buffalo = true; + } + ++static int ath79_request_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ char buf[32]; ++ char *label; ++ int err; ++ ++ scnprintf(buf, sizeof(buf), "external LNA%u", chain); ++ label = kstrdup(buf, GFP_KERNEL); ++ ++ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label); ++ if (err) { ++ pr_err("unable to request GPIO%d for external LNA%u\n", ++ gpio, chain); ++ kfree(label); ++ } ++ ++ return err; ++} ++ ++static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ unsigned int sel; ++ int err; ++ ++ if (WARN_ON(chain > 1)) ++ return; ++ ++ err = ath79_request_ext_lna_gpio(chain, gpio); ++ if (err) ++ return; ++ ++ if (chain == 0) ++ sel = AR934X_GPIO_OUT_EXT_LNA0; ++ else ++ sel = AR934X_GPIO_OUT_EXT_LNA1; ++ ++ ath79_gpio_output_select(gpio, sel); ++} ++ ++void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ if (soc_is_ar934x()) ++ ar934x_set_ext_lna_gpio(chain, gpio); ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void); + void ath79_wmac_disable_2ghz(void); + void ath79_wmac_disable_5ghz(void); + void ath79_wmac_set_tx_gain_buffalo(void); ++void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); + + bool ar93xx_wmac_read_mac_address(u8 *dest); + diff --git a/trunk/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch b/trunk/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch new file mode 100644 index 00000000..6d403abd --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -33,37 +33,6 @@ + + #define AP81_CAL_DATA_ADDR 0x1fff1000 + +-static struct mtd_partition ap81_partitions[] = { +- { +- .name = "u-boot", +- .offset = 0, +- .size = 0x040000, +- .mask_flags = MTD_WRITEABLE, +- }, { +- .name = "u-boot-env", +- .offset = 0x040000, +- .size = 0x010000, +- }, { +- .name = "rootfs", +- .offset = 0x050000, +- .size = 0x500000, +- }, { +- .name = "uImage", +- .offset = 0x550000, +- .size = 0x100000, +- }, { +- .name = "ART", +- .offset = 0x650000, +- .size = 0x1b0000, +- .mask_flags = MTD_WRITEABLE, +- } +-}; +- +-static struct flash_platform_data ap81_flash_data = { +- .parts = ap81_partitions, +- .nr_parts = ARRAY_SIZE(ap81_partitions), +-}; +- + static struct gpio_led ap81_leds_gpio[] __initdata = { + { + .name = "ap81:green:status", +@@ -111,7 +80,7 @@ static void __init ap81_setup(void) + ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap81_gpio_keys), + ap81_gpio_keys); +- ath79_register_m25p80(&ap81_flash_data); ++ ath79_register_m25p80(NULL); + ath79_register_wmac(cal_data, NULL); + ath79_register_usb(); + diff --git a/trunk/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch b/trunk/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch new file mode 100644 index 00000000..60872ae0 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch @@ -0,0 +1,44 @@ +--- a/arch/mips/ath79/mach-ap83.c ++++ b/arch/mips/ath79/mach-ap83.c +@@ -42,41 +42,8 @@ + #define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) + +-static struct mtd_partition ap83_flash_partitions[] = { +- { +- .name = "u-boot", +- .offset = 0, +- .size = 0x040000, +- .mask_flags = MTD_WRITEABLE, +- }, { +- .name = "u-boot-env", +- .offset = 0x040000, +- .size = 0x020000, +- .mask_flags = MTD_WRITEABLE, +- }, { +- .name = "kernel", +- .offset = 0x060000, +- .size = 0x140000, +- }, { +- .name = "rootfs", +- .offset = 0x1a0000, +- .size = 0x650000, +- }, { +- .name = "art", +- .offset = 0x7f0000, +- .size = 0x010000, +- .mask_flags = MTD_WRITEABLE, +- }, { +- .name = "firmware", +- .offset = 0x060000, +- .size = 0x790000, +- } +-}; +- + static struct physmap_flash_data ap83_flash_data = { + .width = 2, +- .parts = ap83_flash_partitions, +- .nr_parts = ARRAY_SIZE(ap83_flash_partitions), + }; + + static struct resource ap83_flash_resources[] = { diff --git a/trunk/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/trunk/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch new file mode 100644 index 00000000..1f6a4d23 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch @@ -0,0 +1,453 @@ +From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001 +Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net> +From: Matthias Schiffer +Date: Sat, 29 Mar 2014 20:26:08 +0100 +Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC + +Note that the clock calculation looks very similar to the QCA955x, but the +meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed. +--- + arch/mips/ath79/Kconfig | 6 +- + arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++ + arch/mips/ath79/common.c | 4 ++ + arch/mips/ath79/dev-common.c | 1 + + arch/mips/ath79/dev-wmac.c | 20 +++++++ + arch/mips/ath79/early_printk.c | 1 + + arch/mips/ath79/gpio.c | 4 +- + arch/mips/ath79/irq.c | 4 ++ + arch/mips/ath79/setup.c | 8 ++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++ + arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++ + 11 files changed, 182 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1174,6 +1174,10 @@ config SOC_AR934X + select PCI_AR724X if PCI + def_bool n + ++config SOC_QCA953X ++ select USB_ARCH_HAS_EHCI ++ def_bool n ++ + config SOC_QCA955X + select HW_HAS_PCI + select PCI_AR724X if PCI +@@ -1216,7 +1220,7 @@ config ATH79_DEV_USB + def_bool n + + config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) ++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) + def_bool n + + config ATH79_NVRAM +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -350,6 +350,91 @@ static void __init ar934x_clocks_init(vo + iounmap(dpll_base); + } + ++static void __init qca953x_clocks_init(void) ++{ ++ unsigned long ref_rate; ++ unsigned long cpu_rate; ++ unsigned long ddr_rate; ++ unsigned long ahb_rate; ++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; ++ u32 cpu_pll, ddr_pll; ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40) ++ ref_rate = 40 * 1000 * 1000; ++ else ++ ref_rate = 25 * 1000 * 1000; ++ ++ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); ++ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK; ++ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_NINT_MASK; ++ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK; ++ ++ cpu_pll = nint * ref_rate / ref_div; ++ cpu_pll += frac * (ref_rate >> 6) / ref_div; ++ cpu_pll /= (1 << out_div); ++ ++ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); ++ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK; ++ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_NINT_MASK; ++ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK; ++ ++ ddr_pll = nint * ref_rate / ref_div; ++ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); ++ ddr_pll /= (1 << out_div); ++ ++ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS) ++ cpu_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) ++ cpu_rate = cpu_pll / (postdiv + 1); ++ else ++ cpu_rate = ddr_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS) ++ ddr_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) ++ ddr_rate = ddr_pll / (postdiv + 1); ++ else ++ ddr_rate = cpu_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS) ++ ahb_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) ++ ahb_rate = ddr_pll / (postdiv + 1); ++ else ++ ahb_rate = cpu_pll / (postdiv + 1); ++ ++ ath79_add_sys_clkdev("ref", ref_rate); ++ ath79_add_sys_clkdev("cpu", cpu_rate); ++ ath79_add_sys_clkdev("ddr", ddr_rate); ++ ath79_add_sys_clkdev("ahb", ahb_rate); ++ ++ clk_add_alias("wdt", NULL, "ref", NULL); ++ clk_add_alias("uart", NULL, "ref", NULL); ++} ++ + static void __init qca955x_clocks_init(void) + { + unsigned long ref_rate; +@@ -447,6 +532,8 @@ void __init ath79_clocks_init(void) + ar933x_clocks_init(); + else if (soc_is_ar934x()) + ar934x_clocks_init(); ++ else if (soc_is_qca953x()) ++ qca953x_clocks_init(); + else if (soc_is_qca955x()) + qca955x_clocks_init(); + else +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -73,6 +73,8 @@ void ath79_device_reset_set(u32 mask) + reg = AR933X_RESET_REG_RESET_MODULE; + else if (soc_is_ar934x()) + reg = AR934X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca953x()) ++ reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +@@ -101,6 +103,8 @@ void ath79_device_reset_clear(u32 mask) + reg = AR933X_RESET_REG_RESET_MODULE; + else if (soc_is_ar934x()) + reg = AR934X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca953x()) ++ reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -93,6 +93,7 @@ void __init ath79_register_uart(void) + soc_is_ar724x() || + soc_is_ar913x() || + soc_is_ar934x() || ++ soc_is_qca953x() || + soc_is_qca955x()) { + ath79_uart_data[0].uartclk = uart_clk_rate; + platform_device_register(&ath79_uart_device); +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -101,7 +101,7 @@ static int ar933x_wmac_reset(void) + return -ETIMEDOUT; + } + +-static int ar933x_r1_get_wmac_revision(void) ++static int ar93xx_get_soc_revision(void) + { + return ath79_soc_rev; + } +@@ -126,7 +126,7 @@ static void __init ar933x_wmac_setup(voi + ath79_wmac_data.is_clk_25mhz = true; + + if (ath79_soc_rev == 1) +- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + + ath79_wmac_data.external_reset = ar933x_wmac_reset; + } +@@ -149,6 +149,26 @@ static void ar934x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + ++static void qca953x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ath79_wmac_device.name = "qca953x_wmac"; ++ ++ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE; ++ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); ++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); ++ ++ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); ++ if (t & QCA953X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; ++} ++ + static void qca955x_wmac_setup(void) + { + u32 t; +@@ -366,6 +386,8 @@ void __init ath79_register_wmac(u8 *cal_ + ar933x_wmac_setup(); + else if (soc_is_ar934x()) + ar934x_wmac_setup(); ++ else if (soc_is_qca953x()) ++ qca953x_wmac_setup(); + else if (soc_is_qca955x()) + qca955x_wmac_setup(); + else +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -114,6 +114,8 @@ static void prom_putchar_init(void) + case REV_ID_MAJOR_AR9341: + case REV_ID_MAJOR_AR9342: + case REV_ID_MAJOR_AR9344: ++ case REV_ID_MAJOR_QCA9533: ++ case REV_ID_MAJOR_QCA9533_V2: + case REV_ID_MAJOR_QCA9556: + case REV_ID_MAJOR_QCA9558: + _prom_putchar = prom_putchar_ar71xx; +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -224,6 +224,8 @@ void __init ath79_gpio_init(void) + ath79_gpio_count = AR933X_GPIO_COUNT; + else if (soc_is_ar934x()) + ath79_gpio_count = AR934X_GPIO_COUNT; ++ else if (soc_is_qca953x()) ++ ath79_gpio_count = QCA953X_GPIO_COUNT; + else if (soc_is_qca955x()) + ath79_gpio_count = QCA955X_GPIO_COUNT; + else +@@ -231,7 +233,7 @@ void __init ath79_gpio_init(void) + + ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + ath79_gpio_chip.ngpio = ath79_gpio_count; +- if (soc_is_ar934x() || soc_is_qca955x()) { ++ if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) { + ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; + ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; + } +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -106,6 +106,7 @@ static void __init ath79_misc_irq_init(v + else if (soc_is_ar724x() || + soc_is_ar933x() || + soc_is_ar934x() || ++ soc_is_qca953x() || + soc_is_qca955x()) + ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + else +@@ -352,6 +353,9 @@ void __init arch_init_irq(void) + } else if (soc_is_ar934x()) { + ath79_ip2_handler = ath79_default_ip2_handler; + ath79_ip3_handler = ar934x_ip3_handler; ++ } else if (soc_is_qca953x()) { ++ ath79_ip2_handler = ath79_default_ip2_handler; ++ ath79_ip3_handler = ath79_default_ip3_handler; + } else if (soc_is_qca955x()) { + ath79_ip2_handler = ath79_default_ip2_handler; + ath79_ip3_handler = ath79_default_ip3_handler; +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -59,6 +59,7 @@ static void __init ath79_detect_sys_type + u32 major; + u32 minor; + u32 rev = 0; ++ u32 ver = 1; + + id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID); + major = id & REV_ID_MAJOR_MASK; +@@ -151,6 +152,16 @@ static void __init ath79_detect_sys_type + rev = id & AR934X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_QCA9533_V2: ++ ver = 2; ++ /* drop through */ ++ ++ case REV_ID_MAJOR_QCA9533: ++ ath79_soc = ATH79_SOC_QCA9533; ++ chip = "9533"; ++ rev = id & QCA953X_REV_ID_REVISION_MASK; ++ break; ++ + case REV_ID_MAJOR_QCA9556: + ath79_soc = ATH79_SOC_QCA9556; + chip = "9556"; +@@ -169,9 +180,9 @@ static void __init ath79_detect_sys_type + + ath79_soc_rev = rev; + +- if (soc_is_qca955x()) +- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", +- chip, rev); ++ if (soc_is_qca953x() || soc_is_qca955x()) ++ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", ++ chip, ver, rev); + else + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ath79_sys_type); +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -105,6 +105,9 @@ + #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) + #define AR934X_SRIF_SIZE 0x1000 + ++#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define QCA953X_WMAC_SIZE 0x20000 ++ + #define QCA955X_PCI_MEM_BASE0 0x10000000 + #define QCA955X_PCI_MEM_BASE1 0x12000000 + #define QCA955X_PCI_MEM_SIZE 0x02000000 +@@ -279,6 +282,43 @@ + + #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) + ++#define QCA953X_PLL_CPU_CONFIG_REG 0x00 ++#define QCA953X_PLL_DDR_CONFIG_REG 0x04 ++#define QCA953X_PLL_CLK_CTRL_REG 0x08 ++#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c ++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48 ++ ++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 ++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f ++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6 ++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f ++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 ++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 ++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 ++ ++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 ++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff ++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10 ++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f ++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 ++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f ++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 ++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) ++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) ++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) ++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 ++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 ++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 ++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) ++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) ++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) ++ + #define QCA955X_PLL_CPU_CONFIG_REG 0x00 + #define QCA955X_PLL_DDR_CONFIG_REG 0x04 + #define QCA955X_PLL_CLK_CTRL_REG 0x08 +@@ -355,6 +395,10 @@ + #define AR934X_RESET_REG_BOOTSTRAP 0xb0 + #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac + ++#define QCA953X_RESET_REG_RESET_MODULE 0x1c ++#define QCA953X_RESET_REG_BOOTSTRAP 0xb0 ++#define QCA953X_RESET_REG_EXT_INT_STATUS 0xac ++ + #define QCA955X_RESET_REG_RESET_MODULE 0x1c + #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 + #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac +@@ -503,6 +547,8 @@ + #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) + #define AR934X_BOOTSTRAP_DDR1 BIT(0) + ++#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4) ++ + #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) +@@ -565,6 +611,8 @@ + #define REV_ID_MAJOR_AR9341 0x0120 + #define REV_ID_MAJOR_AR9342 0x1120 + #define REV_ID_MAJOR_AR9344 0x2120 ++#define REV_ID_MAJOR_QCA9533 0x0140 ++#define REV_ID_MAJOR_QCA9533_V2 0x0160 + #define REV_ID_MAJOR_QCA9556 0x0130 + #define REV_ID_MAJOR_QCA9558 0x1130 + +@@ -587,6 +635,8 @@ + + #define AR934X_REV_ID_REVISION_MASK 0xf + ++#define QCA953X_REV_ID_REVISION_MASK 0xf ++ + #define QCA955X_REV_ID_REVISION_MASK 0xf + + /* +@@ -640,6 +690,7 @@ + #define AR913X_GPIO_COUNT 22 + #define AR933X_GPIO_COUNT 30 + #define AR934X_GPIO_COUNT 23 ++#define QCA953X_GPIO_COUNT 24 + #define QCA955X_GPIO_COUNT 24 + + /* +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -32,6 +32,7 @@ enum ath79_soc_type { + ATH79_SOC_AR9341, + ATH79_SOC_AR9342, + ATH79_SOC_AR9344, ++ ATH79_SOC_QCA9533, + ATH79_SOC_QCA9556, + ATH79_SOC_QCA9558, + }; +@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void) + return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); + } + ++static inline int soc_is_qca9533(void) ++{ ++ return ath79_soc == ATH79_SOC_QCA9533; ++} ++ ++static inline int soc_is_qca953x(void) ++{ ++ return soc_is_qca9533(); ++} ++ + static inline int soc_is_qca9556(void) + { + return ath79_soc == ATH79_SOC_QCA9556; diff --git a/trunk/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch b/trunk/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch new file mode 100644 index 00000000..b1b4946e --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -147,6 +147,8 @@ static void ar934x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = false; + else + ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + } + + static void qca953x_wmac_setup(void) diff --git a/trunk/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch b/trunk/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch new file mode 100644 index 00000000..612078c7 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP + + static void ath79_restart(char *command) + { ++ local_irq_disable(); + ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); + for (;;) + if (cpu_wait) +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -144,6 +144,7 @@ static inline u32 ath79_pll_rr(unsigned + static inline void ath79_reset_wr(unsigned reg, u32 val) + { + __raw_writel(val, ath79_reset_base + reg); ++ (void) __raw_readl(ath79_reset_base + reg); /* flush */ + } + + static inline u32 ath79_reset_rr(unsigned reg) diff --git a/trunk/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/trunk/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch new file mode 100644 index 00000000..2e1ae29e --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch @@ -0,0 +1,767 @@ +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -520,6 +520,100 @@ static void __init qca955x_clocks_init(v + clk_add_alias("uart", NULL, "ref", NULL); + } + ++static void __init qca956x_clocks_init(void) ++{ ++ unsigned long ref_rate; ++ unsigned long cpu_rate; ++ unsigned long ddr_rate; ++ unsigned long ahb_rate; ++ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv; ++ u32 cpu_pll, ddr_pll; ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40) ++ ref_rate = 40 * 1000 * 1000; ++ else ++ ref_rate = 25 * 1000 * 1000; ++ ++ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); ++ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; ++ ++ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); ++ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NINT_MASK; ++ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK; ++ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK; ++ ++ cpu_pll = nint * ref_rate / ref_div; ++ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); ++ cpu_pll += (hfrac >> 13) * ref_rate / ref_div; ++ cpu_pll /= (1 << out_div); ++ ++ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); ++ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; ++ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); ++ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NINT_MASK; ++ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK; ++ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK; ++ ++ ddr_pll = nint * ref_rate / ref_div; ++ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); ++ ddr_pll += (hfrac >> 13) * ref_rate / ref_div; ++ ddr_pll /= (1 << out_div); ++ ++ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS) ++ cpu_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL) ++ cpu_rate = ddr_pll / (postdiv + 1); ++ else ++ cpu_rate = cpu_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS) ++ ddr_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL) ++ ddr_rate = cpu_pll / (postdiv + 1); ++ else ++ ddr_rate = ddr_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS) ++ ahb_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) ++ ahb_rate = ddr_pll / (postdiv + 1); ++ else ++ ahb_rate = cpu_pll / (postdiv + 1); ++ ++ ath79_add_sys_clkdev("ref", ref_rate); ++ ath79_add_sys_clkdev("cpu", cpu_rate); ++ ath79_add_sys_clkdev("ddr", ddr_rate); ++ ath79_add_sys_clkdev("ahb", ahb_rate); ++ ++ clk_add_alias("wdt", NULL, "ref", NULL); ++ clk_add_alias("uart", NULL, "ref", NULL); ++} ++ + void __init ath79_clocks_init(void) + { + if (soc_is_ar71xx()) +@@ -536,6 +630,8 @@ void __init ath79_clocks_init(void) + qca953x_clocks_init(); + else if (soc_is_qca955x()) + qca955x_clocks_init(); ++ else if (soc_is_qca956x()) ++ qca956x_clocks_init(); + else + BUG(); + } +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -77,6 +77,8 @@ void ath79_device_reset_set(u32 mask) + reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca956x()) ++ reg = QCA956X_RESET_REG_RESET_MODULE; + else + panic("Reset register not defined for this SOC"); + +@@ -107,6 +109,8 @@ void ath79_device_reset_clear(u32 mask) + reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca956x()) ++ reg = QCA956X_RESET_REG_RESET_MODULE; + else + panic("Reset register not defined for this SOC"); + +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -94,7 +94,8 @@ void __init ath79_register_uart(void) + soc_is_ar913x() || + soc_is_ar934x() || + soc_is_qca953x() || +- soc_is_qca955x()) { ++ soc_is_qca955x() || ++ soc_is_qca956x()) { + ath79_uart_data[0].uartclk = uart_clk_rate; + platform_device_register(&ath79_uart_device); + } else if (soc_is_ar933x()) { +--- a/arch/mips/ath79/dev-eth.c ++++ b/arch/mips/ath79/dev-eth.c +@@ -198,6 +198,8 @@ void __init ath79_register_mdio(unsigned + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + mdio_dev = &ath79_mdio1_device; + mdio_data = &ath79_mdio1_data; + break; +@@ -256,6 +258,8 @@ void __init ath79_register_mdio(unsigned + break; + + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + mdio_data->builtin_switch = 1; + break; + +@@ -571,6 +575,8 @@ static void __init ath79_init_eth_pll_da + case ATH79_SOC_QCA9533: + case ATH79_SOC_QCA9556: + case ATH79_SOC_QCA9558: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + pll_10 = AR934X_PLL_VAL_10; + pll_100 = AR934X_PLL_VAL_100; + pll_1000 = AR934X_PLL_VAL_1000; +@@ -627,6 +633,8 @@ static int __init ath79_setup_phy_if_mod + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; + break; + +@@ -688,6 +696,8 @@ static int __init ath79_setup_phy_if_mod + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; + break; + +@@ -992,6 +1002,8 @@ void __init ath79_register_eth(unsigned + break; + + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + if (id == 0) { + pdata->reset_bit = AR933X_RESET_GE0_MAC | + AR933X_RESET_GE0_MDIO; +@@ -1097,6 +1109,8 @@ void __init ath79_register_eth(unsigned + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + case ATH79_SOC_QCA9533: ++ case ATH79_SOC_QCA9561: ++ case ATH79_SOC_TP9343: + pdata->mii_bus_dev = &ath79_mdio1_device.dev; + break; + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -272,6 +272,19 @@ static void __init qca955x_usb_setup(voi + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void __init qca956x_usb_setup(void) ++{ ++ ath79_usb_register("ehci-platform", 0, ++ QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE, ++ ATH79_IP3_IRQ(0), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++ ++ ath79_usb_register("ehci-platform", 1, ++ QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE, ++ ATH79_IP3_IRQ(1), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++} ++ + void __init ath79_register_usb(void) + { + if (soc_is_ar71xx()) +@@ -288,6 +301,8 @@ void __init ath79_register_usb(void) + ar934x_usb_setup(); + else if (soc_is_qca955x()) + qca955x_usb_setup(); ++ else if (soc_is_qca9561()) ++ qca956x_usb_setup(); + else + BUG(); + } +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -189,6 +189,24 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + ++static void qca956x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ath79_wmac_device.name = "qca956x_wmac"; ++ ++ ath79_wmac_resources[0].start = QCA956X_WMAC_BASE; ++ ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); ++ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); ++ ++ t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); ++ if (t & QCA956X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++} ++ + static bool __init + ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) + { +@@ -392,6 +410,8 @@ void __init ath79_register_wmac(u8 *cal_ + qca953x_wmac_setup(); + else if (soc_is_qca955x()) + qca955x_wmac_setup(); ++ else if (soc_is_qca956x()) ++ qca956x_wmac_setup(); + else + BUG(); + +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -118,6 +118,8 @@ static void prom_putchar_init(void) + case REV_ID_MAJOR_QCA9533_V2: + case REV_ID_MAJOR_QCA9556: + case REV_ID_MAJOR_QCA9558: ++ case REV_ID_MAJOR_TP9343: ++ case REV_ID_MAJOR_QCA9561: + _prom_putchar = prom_putchar_ar71xx; + break; + +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -148,7 +148,8 @@ static void __iomem *ath79_gpio_get_func + soc_is_ar913x() || + soc_is_ar933x()) + reg = AR71XX_GPIO_REG_FUNC; +- else if (soc_is_ar934x()) ++ else if (soc_is_ar934x() || ++ soc_is_qca956x()) + reg = AR934X_GPIO_REG_FUNC; + else + BUG(); +@@ -228,12 +229,15 @@ void __init ath79_gpio_init(void) + ath79_gpio_count = QCA953X_GPIO_COUNT; + else if (soc_is_qca955x()) + ath79_gpio_count = QCA955X_GPIO_COUNT; ++ else if (soc_is_qca956x()) ++ ath79_gpio_count = QCA956X_GPIO_COUNT; + else + BUG(); + + ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + ath79_gpio_chip.ngpio = ath79_gpio_count; +- if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) { ++ if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x() || ++ soc_is_qca956x()) { + ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; + ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; + } +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -107,7 +107,8 @@ static void __init ath79_misc_irq_init(v + soc_is_ar933x() || + soc_is_ar934x() || + soc_is_qca953x() || +- soc_is_qca955x()) ++ soc_is_qca955x() || ++ soc_is_qca956x()) + ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + else + BUG(); +@@ -236,6 +237,99 @@ static void qca955x_irq_init(void) + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); + } + ++static void qca956x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) ++{ ++ u32 status; ++ ++ disable_irq_nosync(irq); ++ ++ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); ++ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL; ++ ++ if (status == 0) { ++ spurious_interrupt(); ++ goto enable; ++ } ++ ++ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP2_IRQ(0)); ++ } ++ ++ if (status & QCA956X_EXT_INT_WMAC_ALL) { ++ /* TODO: flsuh DDR? */ ++ generic_handle_irq(ATH79_IP2_IRQ(1)); ++ } ++ ++enable: ++ enable_irq(irq); ++} ++ ++static void qca956x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc) ++{ ++ u32 status; ++ ++ disable_irq_nosync(irq); ++ ++ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); ++ status &= QCA956X_EXT_INT_PCIE_RC2_ALL | ++ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2; ++ ++ if (status == 0) { ++ spurious_interrupt(); ++ goto enable; ++ } ++ ++ if (status & QCA956X_EXT_INT_USB1) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(0)); ++ } ++ ++ if (status & QCA956X_EXT_INT_USB2) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(1)); ++ } ++ ++ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(2)); ++ } ++ ++enable: ++ enable_irq(irq); ++} ++ ++static void qca956x_enable_timer_cb(void) { ++ u32 misc; ++ ++ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); ++ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; ++ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc); ++} ++ ++static void qca956x_irq_init(void) ++{ ++ int i; ++ ++ for (i = ATH79_IP2_IRQ_BASE; ++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, ++ handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); ++ ++ for (i = ATH79_IP3_IRQ_BASE; ++ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, ++ handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); ++ ++ /* QCA956x timer init workaround has to be applied right before setting ++ * up the clock. Else, there will be no jiffies */ ++ late_time_init = &qca956x_enable_timer_cb; ++} ++ + asmlinkage void plat_irq_dispatch(void) + { + unsigned long pending; +@@ -359,6 +453,9 @@ void __init arch_init_irq(void) + } else if (soc_is_qca955x()) { + ath79_ip2_handler = ath79_default_ip2_handler; + ath79_ip3_handler = ath79_default_ip3_handler; ++ } else if (soc_is_qca956x()) { ++ ath79_ip2_handler = ath79_default_ip2_handler; ++ ath79_ip3_handler = ath79_default_ip3_handler; + } else { + BUG(); + } +@@ -371,4 +468,6 @@ void __init arch_init_irq(void) + ar934x_ip2_irq_init(); + else if (soc_is_qca955x()) + qca955x_irq_init(); ++ else if (soc_is_qca956x()) ++ qca956x_irq_init(); + } +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1183,6 +1183,12 @@ config SOC_QCA955X + select PCI_AR724X if PCI + def_bool n + ++config SOC_QCA956X ++ select USB_ARCH_HAS_EHCI ++ select HW_HAS_PCI ++ select PCI_AR724X if PCI ++ def_bool n ++ + config ATH79_DEV_M25P80 + select ATH79_DEV_SPI + def_bool n +@@ -1220,7 +1226,7 @@ config ATH79_DEV_USB + def_bool n + + config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) ++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) + def_bool n + + config ATH79_NVRAM +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955 + }, + }; + ++static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = { ++ { ++ .bus = 0, ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(0), ++ }, ++ { ++ .bus = 1, ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(1), ++ }, ++}; ++ + int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) + { + int irq = -1; +@@ -86,6 +101,9 @@ int __init pcibios_map_irq(const struct + } else if (soc_is_qca955x()) { + ath79_pci_irq_map = qca955x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); ++ } else if (soc_is_qca9561()) { ++ ath79_pci_irq_map = qca956x_pci_irq_map; ++ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map); + } else { + pr_crit("pci %s: invalid irq map\n", + pci_name((struct pci_dev *) dev)); +@@ -303,6 +321,15 @@ int __init ath79_register_pci(void) + QCA955X_PCI_MEM_SIZE, + 1, + ATH79_IP3_IRQ(2)); ++ } else if (soc_is_qca9561()) { ++ pdev = ath79_register_pci_ar724x(0, ++ QCA956X_PCI_CFG_BASE1, ++ QCA956X_PCI_CTRL_BASE1, ++ QCA956X_PCI_CRP_BASE1, ++ QCA956X_PCI_MEM_BASE1, ++ QCA956X_PCI_MEM_SIZE, ++ 1, ++ ATH79_IP3_IRQ(2)); + } else { + /* No PCI support */ + return -ENODEV; +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -175,15 +175,30 @@ static void __init ath79_detect_sys_type + rev = id & QCA955X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_TP9343: ++ ath79_soc = ATH79_SOC_TP9343; ++ chip = "9343"; ++ rev = id & QCA956X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_QCA9561: ++ ath79_soc = ATH79_SOC_QCA9561; ++ chip = "9561"; ++ rev = id & QCA956X_REV_ID_REVISION_MASK; ++ break; ++ + default: + panic("ath79: unknown SoC, id:0x%08x", id); + } + + ath79_soc_rev = rev; + +- if (soc_is_qca953x() || soc_is_qca955x()) ++ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca9561()) + sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", + chip, ver, rev); ++ else if (soc_is_tp9343()) ++ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u", ++ chip, rev); + else + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ath79_sys_type); +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -131,6 +131,23 @@ + #define QCA955X_NFC_BASE 0x1b800200 + #define QCA955X_NFC_SIZE 0xb8 + ++#define QCA956X_PCI_MEM_BASE1 0x12000000 ++#define QCA956X_PCI_MEM_SIZE 0x02000000 ++#define QCA956X_PCI_CFG_BASE1 0x16000000 ++#define QCA956X_PCI_CFG_SIZE 0x1000 ++#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) ++#define QCA956X_PCI_CRP_SIZE 0x1000 ++#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) ++#define QCA956X_PCI_CTRL_SIZE 0x100 ++ ++#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define QCA956X_WMAC_SIZE 0x20000 ++#define QCA956X_EHCI0_BASE 0x1b000000 ++#define QCA956X_EHCI1_BASE 0x1b400000 ++#define QCA956X_EHCI_SIZE 0x200 ++#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA956X_GMAC_SIZE 0x64 ++ + #define AR9300_OTP_BASE 0x14000 + #define AR9300_OTP_STATUS 0x15f18 + #define AR9300_OTP_STATUS_TYPE 0x7 +@@ -356,6 +373,49 @@ + #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) + #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + ++#define QCA956X_PLL_CPU_CONFIG_REG 0x00 ++#define QCA956X_PLL_CPU_CONFIG1_REG 0x04 ++#define QCA956X_PLL_DDR_CONFIG_REG 0x08 ++#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c ++#define QCA956X_PLL_CLK_CTRL_REG 0x10 ++ ++#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 ++#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 ++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0 ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5 ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x3fff ++#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18 ++#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff ++ ++#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 ++#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f ++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 ++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0 ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5 ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x3fff ++#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18 ++#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff ++ ++#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) ++#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) ++#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) ++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 ++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 ++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 ++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20) ++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) ++#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) ++ + /* + * USB_CONFIG block + */ +@@ -403,6 +463,11 @@ + #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 + #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac + ++#define QCA956X_RESET_REG_RESET_MODULE 0x1c ++#define QCA956X_RESET_REG_BOOTSTRAP 0xb0 ++#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac ++ ++#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28) + #define MISC_INT_ETHSW BIT(12) + #define MISC_INT_TIMER4 BIT(10) + #define MISC_INT_TIMER3 BIT(9) +@@ -551,6 +616,8 @@ + + #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + ++#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) ++ + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) + #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) + #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) +@@ -600,6 +667,37 @@ + QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ + QCA955X_EXT_INT_PCIE_RC2_INT3) + ++#define QCA956X_EXT_INT_WMAC_MISC BIT(0) ++#define QCA956X_EXT_INT_WMAC_TX BIT(1) ++#define QCA956X_EXT_INT_WMAC_RXLP BIT(2) ++#define QCA956X_EXT_INT_WMAC_RXHP BIT(3) ++#define QCA956X_EXT_INT_PCIE_RC1 BIT(4) ++#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5) ++#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6) ++#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7) ++#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8) ++#define QCA956X_EXT_INT_PCIE_RC2 BIT(12) ++#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13) ++#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14) ++#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15) ++#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16) ++#define QCA956X_EXT_INT_USB1 BIT(24) ++#define QCA956X_EXT_INT_USB2 BIT(28) ++ ++#define QCA956X_EXT_INT_WMAC_ALL \ ++ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \ ++ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP) ++ ++#define QCA956X_EXT_INT_PCIE_RC1_ALL \ ++ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \ ++ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \ ++ QCA956X_EXT_INT_PCIE_RC1_INT3) ++ ++#define QCA956X_EXT_INT_PCIE_RC2_ALL \ ++ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \ ++ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \ ++ QCA956X_EXT_INT_PCIE_RC2_INT3) ++ + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 + #define REV_ID_MAJOR_AR913X 0x00b0 +@@ -615,6 +713,8 @@ + #define REV_ID_MAJOR_QCA9533_V2 0x0160 + #define REV_ID_MAJOR_QCA9556 0x0130 + #define REV_ID_MAJOR_QCA9558 0x1130 ++#define REV_ID_MAJOR_TP9343 0x0150 ++#define REV_ID_MAJOR_QCA9561 0x1150 + + #define AR71XX_REV_ID_MINOR_MASK 0x3 + #define AR71XX_REV_ID_MINOR_AR7130 0x0 +@@ -639,6 +739,8 @@ + + #define QCA955X_REV_ID_REVISION_MASK 0xf + ++#define QCA956X_REV_ID_REVISION_MASK 0xf ++ + /* + * SPI block + */ +@@ -684,6 +786,19 @@ + #define AR934X_GPIO_REG_OUT_FUNC5 0x40 + #define AR934X_GPIO_REG_FUNC 0x6c + ++#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c ++#define QCA956X_GPIO_REG_OUT_FUNC1 0x30 ++#define QCA956X_GPIO_REG_OUT_FUNC2 0x34 ++#define QCA956X_GPIO_REG_OUT_FUNC3 0x38 ++#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c ++#define QCA956X_GPIO_REG_OUT_FUNC5 0x40 ++#define QCA956X_GPIO_REG_IN_ENABLE0 0x44 ++#define QCA956X_GPIO_REG_IN_ENABLE3 0x50 ++#define QCA956X_GPIO_REG_FUNC 0x6c ++ ++#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32 ++#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33 ++ + #define AR71XX_GPIO_COUNT 16 + #define AR7240_GPIO_COUNT 18 + #define AR7241_GPIO_COUNT 20 +@@ -692,6 +807,7 @@ + #define AR934X_GPIO_COUNT 23 + #define QCA953X_GPIO_COUNT 24 + #define QCA955X_GPIO_COUNT 24 ++#define QCA956X_GPIO_COUNT 23 + + /* + * SRIF block +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -35,6 +35,8 @@ enum ath79_soc_type { + ATH79_SOC_QCA9533, + ATH79_SOC_QCA9556, + ATH79_SOC_QCA9558, ++ ATH79_SOC_TP9343, ++ ATH79_SOC_QCA9561, + }; + + extern enum ath79_soc_type ath79_soc; +@@ -126,6 +128,21 @@ static inline int soc_is_qca955x(void) + return soc_is_qca9556() || soc_is_qca9558(); + } + ++static inline int soc_is_tp9343(void) ++{ ++ return ath79_soc == ATH79_SOC_TP9343; ++} ++ ++static inline int soc_is_qca9561(void) ++{ ++ return ath79_soc == ATH79_SOC_QCA9561; ++} ++ ++static inline int soc_is_qca956x(void) ++{ ++ return soc_is_tp9343() || soc_is_qca9561(); ++} ++ + extern void __iomem *ath79_ddr_base; + extern void __iomem *ath79_gpio_base; + extern void __iomem *ath79_pll_base; diff --git a/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch b/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch new file mode 100644 index 00000000..d38e8230 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -524,6 +524,16 @@ config ATH79_MACH_R6100 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_MC_MAC1200R ++ bool "MERCURY MAC1200R board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_RB4XX + bool "MikroTik RouterBOARD 4xx series support" + select SOC_AR71XX +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -77,6 +77,7 @@ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) + + obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o + obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o + obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o ++obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o + obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o + obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o + obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -116,6 +116,7 @@ enum ath79_mach_type { + ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ + ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ + ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ ++ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/ + ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ + ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ + ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ diff --git a/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch b/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch new file mode 100644 index 00000000..8cb38d39 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch @@ -0,0 +1,93 @@ +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -26,6 +26,8 @@ + + static void (*ath79_ip2_handler)(void); + static void (*ath79_ip3_handler)(void); ++static struct irq_chip ip2_chip; ++static struct irq_chip ip3_chip; + + static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc) + { +@@ -149,8 +151,7 @@ static void ar934x_ip2_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); + } +@@ -224,15 +225,13 @@ static void qca955x_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); + + for (i = ATH79_IP3_IRQ_BASE; + i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); + } +@@ -313,15 +312,13 @@ static void qca956x_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); + + for (i = ATH79_IP3_IRQ_BASE; + i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); + +@@ -430,8 +427,35 @@ static void ar934x_ip3_handler(void) + do_IRQ(ATH79_CPU_IRQ(3)); + } + ++static void ath79_ip2_disable(struct irq_data *data) ++{ ++ disable_irq(ATH79_CPU_IRQ(2)); ++} ++ ++static void ath79_ip2_enable(struct irq_data *data) ++{ ++ enable_irq(ATH79_CPU_IRQ(2)); ++} ++ ++static void ath79_ip3_disable(struct irq_data *data) ++{ ++ disable_irq(ATH79_CPU_IRQ(3)); ++} ++ ++static void ath79_ip3_enable(struct irq_data *data) ++{ ++ enable_irq(ATH79_CPU_IRQ(3)); ++} ++ + void __init arch_init_irq(void) + { ++ ip2_chip = dummy_irq_chip; ++ ip3_chip = dummy_irq_chip; ++ ip2_chip.irq_disable = ath79_ip2_disable; ++ ip2_chip.irq_enable = ath79_ip2_enable; ++ ip3_chip.irq_disable = ath79_ip3_disable; ++ ip3_chip.irq_enable = ath79_ip3_enable; ++ + if (soc_is_ar71xx()) { + ath79_ip2_handler = ar71xx_ip2_handler; + ath79_ip3_handler = ar71xx_ip3_handler; diff --git a/trunk/target/linux/ar71xx/patches-3.18/737-MIPS-ath79-add-om5p-an-support.patch b/trunk/target/linux/ar71xx/patches-3.18/737-MIPS-ath79-add-om5p-an-support.patch new file mode 100644 index 00000000..0d493f6f --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/737-MIPS-ath79-add-om5p-an-support.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -83,6 +83,7 @@ enum ath79_mach_type { + ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ + ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ + ATH79_MACH_OM2P, /* OpenMesh OM2P */ ++ ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */ + ATH79_MACH_OM5P, /* OpenMesh OM5P */ + ATH79_MACH_PB42, /* Atheros PB42 */ + ATH79_MACH_PB92, /* Atheros PB92 */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -677,6 +677,7 @@ config ATH79_MACH_OM2P + config ATH79_MACH_OM5P + bool "OpenMesh OM5P board support" + select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO diff --git a/trunk/target/linux/ar71xx/patches-3.18/800-MIPS-ath79-add-RB922GS-support.patch b/trunk/target/linux/ar71xx/patches-3.18/800-MIPS-ath79-add-RB922GS-support.patch new file mode 100644 index 00000000..d206f3b8 --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/800-MIPS-ath79-add-RB922GS-support.patch @@ -0,0 +1,51 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -559,6 +559,16 @@ config ATH79_MACH_RB91X + select ATH79_DEV_USB + select ATH79_ROUTERBOOT + ++config ATH79_MACH_RB922 ++ bool "MikroTik RouterBOARD 922 support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ select ATH79_ROUTERBOOT ++ select RLE_DECOMPRESS ++ + config ATH79_MACH_RB95X + bool "MikroTik RouterBOARD 95X support" + select SOC_AR934X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -96,6 +96,7 @@ obj-$(CONFIG_ATH79_MACH_R6100) += mach- + obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o + obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o + obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o ++obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o + obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o + obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o + obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -103,6 +103,7 @@ enum ath79_mach_type { + ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ + ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ + ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ ++ ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */ + ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ + ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ + ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -184,7 +184,8 @@ void __init prom_init(void) + if (strstr(arcs_cmdline, "board=750Gr3") || + strstr(arcs_cmdline, "board=951G") || + strstr(arcs_cmdline, "board=2011L") || +- strstr(arcs_cmdline, "board=711Gr100")) ++ strstr(arcs_cmdline, "board=711Gr100") || ++ strstr(arcs_cmdline, "board=922gs")) + ath79_prom_append_cmdline("console", "ttyS0,115200"); + } + diff --git a/trunk/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch b/trunk/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch new file mode 100644 index 00000000..39584aab --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch @@ -0,0 +1,20 @@ +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b + + ctrl->ops->set_mdio_dir(ctrl, 0); + +- /* check the turnaround bit: the PHY should be driving it to zero */ +- if (mdiobb_get_bit(ctrl) != 0) { +- /* PHY didn't drive TA low -- flush any bits it +- * may be trying to send. +- */ +- for (i = 0; i < 32; i++) +- mdiobb_get_bit(ctrl); +- +- return 0xffff; +- } ++ mdiobb_get_bit(ctrl); + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); diff --git a/trunk/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch b/trunk/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch new file mode 100644 index 00000000..9afac1be --- /dev/null +++ b/trunk/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch @@ -0,0 +1,883 @@ +--- a/arch/mips/include/asm/checksum.h ++++ b/arch/mips/include/asm/checksum.h +@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = net_hdr_word(word++); ++ ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +@@ -222,69 +226,4 @@ static inline __sum16 ip_compute_csum(co + return csum_fold(csum_partial(buff, len, 0)); + } + +-#define _HAVE_ARCH_IPV6_CSUM +-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, +- const struct in6_addr *daddr, +- __u32 len, unsigned short proto, +- __wsum sum) +-{ +- __asm__( +- " .set push # csum_ipv6_magic\n" +- " .set noreorder \n" +- " .set noat \n" +- " addu %0, %5 # proto (long in network byte order)\n" +- " sltu $1, %0, %5 \n" +- " addu %0, $1 \n" +- +- " addu %0, %6 # csum\n" +- " sltu $1, %0, %6 \n" +- " lw %1, 0(%2) # four words source address\n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 0(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " addu %0, $1 # Add final carry\n" +- " .set pop" +- : "=r" (sum), "=r" (proto) +- : "r" (saddr), "r" (daddr), +- "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); +- +- return csum_fold(sum); +-} +- + #endif /* _ASM_CHECKSUM_H */ +--- a/include/uapi/linux/ip.h ++++ b/include/uapi/linux/ip.h +@@ -102,7 +102,7 @@ struct iphdr { + __be32 saddr; + __be32 daddr; + /*The options start here. */ +-}; ++} __attribute__((packed, aligned(2))); + + + struct ip_auth_hdr { +--- a/include/uapi/linux/ipv6.h ++++ b/include/uapi/linux/ipv6.h +@@ -125,7 +125,7 @@ struct ipv6hdr { + + struct in6_addr saddr; + struct in6_addr daddr; +-}; ++} __attribute__((packed, aligned(2))); + + + /* index values for the variables in ipv6_devconf */ +--- a/include/uapi/linux/tcp.h ++++ b/include/uapi/linux/tcp.h +@@ -54,7 +54,7 @@ struct tcphdr { + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __attribute__((packed, aligned(2))); + + /* + * The union cast uses a gcc extension to avoid aliasing problems +@@ -64,7 +64,7 @@ struct tcphdr { + union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +-}; ++} __attribute__((packed, aligned(2))); + + #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) + +--- a/include/uapi/linux/udp.h ++++ b/include/uapi/linux/udp.h +@@ -24,7 +24,7 @@ struct udphdr { + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __attribute__((packed, aligned(2))); + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ +--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c ++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +@@ -41,8 +41,8 @@ static bool ipv4_pkt_to_tuple(const stru + if (ap == NULL) + return false; + +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = net_hdr_word(ap++); ++ tuple->dst.u3.ip = net_hdr_word(ap); + + return true; + } +--- a/include/uapi/linux/icmp.h ++++ b/include/uapi/linux/icmp.h +@@ -80,7 +80,7 @@ struct icmphdr { + __be16 mtu; + } frag; + } un; +-}; ++} __attribute__((packed, aligned(2))); + + + /* +--- a/include/uapi/linux/in6.h ++++ b/include/uapi/linux/in6.h +@@ -42,7 +42,7 @@ struct in6_addr { + #define s6_addr16 in6_u.u6_addr16 + #define s6_addr32 in6_u.u6_addr32 + #endif +-}; ++} __attribute__((packed, aligned(2))); + #endif /* __UAPI_DEF_IN6_ADDR */ + + #if __UAPI_DEF_SOCKADDR_IN6 +--- a/net/ipv6/tcp_ipv6.c ++++ b/net/ipv6/tcp_ipv6.c +@@ -39,6 +39,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -833,10 +834,10 @@ static void tcp_v6_send_response(struct + topt = (__be32 *)(t1 + 1); + + if (tsecr) { +- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); +- *topt++ = htonl(tsval); +- *topt++ = htonl(tsecr); ++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); ++ put_unaligned_be32(tsval, topt++); ++ put_unaligned_be32(tsecr, topt++); + } + + #ifdef CONFIG_TCP_MD5SIG +--- a/include/linux/ipv6.h ++++ b/include/linux/ipv6.h +@@ -5,6 +5,7 @@ + + #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) + #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) ++ + /* + * This structure contains configuration options per IPv6 link. + */ +--- a/net/ipv6/datagram.c ++++ b/net/ipv6/datagram.c +@@ -374,7 +374,7 @@ int ipv6_recv_error(struct sock *sk, str + ipv6_iface_scope_id(&sin->sin6_addr, + IP6CB(skb)->iif); + } else { +- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), ++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), + &sin->sin6_addr); + sin->sin6_scope_id = 0; + } +@@ -708,12 +708,12 @@ int ip6_datagram_send_ctl(struct net *ne + } + + if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { +- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { ++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { + err = -EINVAL; + goto exit_f; + } + } +- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); ++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); + break; + + case IPV6_2292HOPOPTS: +--- a/net/ipv6/ip6_gre.c ++++ b/net/ipv6/ip6_gre.c +@@ -393,7 +393,7 @@ static void ip6gre_err(struct sk_buff *s + + t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, + flags & GRE_KEY ? +- *(((__be32 *)p) + (grehlen / 4) - 1) : 0, ++ net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0, + p[1]); + if (t == NULL) + return; +@@ -475,11 +475,11 @@ static int ip6gre_rcv(struct sk_buff *sk + offset += 4; + } + if (flags&GRE_KEY) { +- key = *(__be32 *)(h + offset); ++ key = net_hdr_word(h + offset); + offset += 4; + } + if (flags&GRE_SEQ) { +- seqno = ntohl(*(__be32 *)(h + offset)); ++ seqno = ntohl(net_hdr_word(h + offset)); + offset += 4; + } + } +@@ -744,7 +744,7 @@ static netdev_tx_t ip6gre_xmit2(struct s + + if (tunnel->parms.o_flags&GRE_SEQ) { + ++tunnel->o_seqno; +- *ptr = htonl(tunnel->o_seqno); ++ net_hdr_word(ptr) = htonl(tunnel->o_seqno); + ptr--; + } + if (tunnel->parms.o_flags&GRE_KEY) { +@@ -840,7 +840,7 @@ static inline int ip6gre_xmit_ipv6(struc + + dsfield = ipv6_get_dsfield(ipv6h); + if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) +- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); ++ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; + if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) + fl6.flowlabel |= ip6_flowlabel(ipv6h); + if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) +--- a/net/ipv6/ip6_tunnel.c ++++ b/net/ipv6/ip6_tunnel.c +@@ -1291,7 +1291,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str + + dsfield = ipv6_get_dsfield(ipv6h); + if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) +- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); ++ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; + if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) + fl6.flowlabel |= ip6_flowlabel(ipv6h); + if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) +--- a/net/ipv6/exthdrs.c ++++ b/net/ipv6/exthdrs.c +@@ -573,7 +573,7 @@ static bool ipv6_hop_jumbo(struct sk_buf + goto drop; + } + +- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); ++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); + if (pkt_len <= IPV6_MAXPLEN) { + IP6_INC_STATS_BH(net, ipv6_skb_idev(skb), + IPSTATS_MIB_INHDRERRORS); +--- a/include/linux/types.h ++++ b/include/linux/types.h +@@ -213,5 +213,11 @@ struct callback_head { + }; + #define rcu_head callback_head + ++struct net_hdr_word { ++ u32 words[1]; ++} __attribute__((packed, aligned(2))); ++ ++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) ++ + #endif /* __ASSEMBLY__ */ + #endif /* _LINUX_TYPES_H */ +--- a/net/ipv4/af_inet.c ++++ b/net/ipv4/af_inet.c +@@ -1324,8 +1324,8 @@ static struct sk_buff **inet_gro_receive + if (unlikely(ip_fast_csum((u8 *)iph, 5))) + goto out_unlock; + +- id = ntohl(*(__be32 *)&iph->id); +- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); ++ id = ntohl(net_hdr_word(&iph->id)); ++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); + id >>= 16; + + for (p = *head; p; p = p->next) { +--- a/net/ipv4/route.c ++++ b/net/ipv4/route.c +@@ -454,7 +454,7 @@ static struct neighbour *ipv4_neigh_look + else if (skb) + pkey = &ip_hdr(skb)->daddr; + +- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); ++ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); + if (n) + return n; + return neigh_create(&arp_tbl, pkey, dev); +--- a/net/ipv4/tcp_output.c ++++ b/net/ipv4/tcp_output.c +@@ -446,48 +446,53 @@ static void tcp_options_write(__be32 *pt + u16 options = opts->options; /* mungable copy */ + + if (unlikely(OPTION_MD5 & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); + /* overload cookie hash location */ + opts->hash_location = (__u8 *)ptr; + ptr += 4; + } + + if (unlikely(opts->mss)) { +- *ptr++ = htonl((TCPOPT_MSS << 24) | +- (TCPOLEN_MSS << 16) | +- opts->mss); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | ++ opts->mss); + } + + if (likely(OPTION_TS & options)) { + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | +- (TCPOLEN_SACK_PERM << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_SACK_PERM << 24) | ++ (TCPOLEN_SACK_PERM << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + options &= ~OPTION_SACK_ADVERTISE; + } else { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + } +- *ptr++ = htonl(opts->tsval); +- *ptr++ = htonl(opts->tsecr); ++ net_hdr_word(ptr++) = htonl(opts->tsval); ++ net_hdr_word(ptr++) = htonl(opts->tsecr); + } + + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK_PERM << 8) | +- TCPOLEN_SACK_PERM); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK_PERM << 8) | ++ TCPOLEN_SACK_PERM); + } + + if (unlikely(OPTION_WSCALE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_WINDOW << 16) | +- (TCPOLEN_WINDOW << 8) | +- opts->ws); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_WINDOW << 16) | ++ (TCPOLEN_WINDOW << 8) | ++ opts->ws); + } + + if (unlikely(opts->num_sack_blocks)) { +@@ -495,16 +500,17 @@ static void tcp_options_write(__be32 *pt + tp->duplicate_sack : tp->selective_acks; + int this_sack; + +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK << 8) | +- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK << 8) | ++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * + TCPOLEN_SACK_PERBLOCK))); + + for (this_sack = 0; this_sack < opts->num_sack_blocks; + ++this_sack) { +- *ptr++ = htonl(sp[this_sack].start_seq); +- *ptr++ = htonl(sp[this_sack].end_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); + } + + tp->rx_opt.dsack = 0; +@@ -513,9 +519,10 @@ static void tcp_options_write(__be32 *pt + if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) { + struct tcp_fastopen_cookie *foc = opts->fastopen_cookie; + +- *ptr++ = htonl((TCPOPT_EXP << 24) | +- ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | +- TCPOPT_FASTOPEN_MAGIC); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_EXP << 24) | ++ ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | ++ TCPOPT_FASTOPEN_MAGIC); + + memcpy(ptr, foc->val, foc->len); + if ((foc->len & 3) == 2) { +--- a/net/ipv4/igmp.c ++++ b/net/ipv4/igmp.c +@@ -495,7 +495,7 @@ static struct sk_buff *add_grec(struct s + if (!skb) + return NULL; + psrc = (__be32 *)skb_put(skb, sizeof(__be32)); +- *psrc = psf->sf_inaddr; ++ net_hdr_word(psrc) = psf->sf_inaddr; + scount++; stotal++; + if ((type == IGMPV3_ALLOW_NEW_SOURCES || + type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) { +--- a/include/uapi/linux/igmp.h ++++ b/include/uapi/linux/igmp.h +@@ -32,7 +32,7 @@ struct igmphdr { + __u8 code; /* For newer IGMP */ + __sum16 csum; + __be32 group; +-}; ++} __attribute__((packed, aligned(2))); + + /* V3 group record types [grec_type] */ + #define IGMPV3_MODE_IS_INCLUDE 1 +@@ -48,7 +48,7 @@ struct igmpv3_grec { + __be16 grec_nsrcs; + __be32 grec_mca; + __be32 grec_src[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_report { + __u8 type; +@@ -57,7 +57,7 @@ struct igmpv3_report { + __be16 resv2; + __be16 ngrec; + struct igmpv3_grec grec[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_query { + __u8 type; +@@ -78,7 +78,7 @@ struct igmpv3_query { + __u8 qqic; + __be16 nsrcs; + __be32 srcs[0]; +-}; ++} __attribute__((packed, aligned(2))); + + #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ + #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ +--- a/net/core/flow_dissector.c ++++ b/net/core/flow_dissector.c +@@ -53,7 +53,7 @@ __be32 __skb_flow_get_ports(const struct + ports = __skb_header_pointer(skb, thoff + poff, + sizeof(_ports), data, hlen, &_ports); + if (ports) +- return *ports; ++ return (__be32)net_hdr_word(ports); + } + + return 0; +--- a/include/uapi/linux/icmpv6.h ++++ b/include/uapi/linux/icmpv6.h +@@ -76,7 +76,7 @@ struct icmp6hdr { + #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other + #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime + #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +-}; ++} __attribute__((packed, aligned(2))); + + + #define ICMPV6_ROUTER_PREF_LOW 0x3 +--- a/include/net/ndisc.h ++++ b/include/net/ndisc.h +@@ -76,7 +76,7 @@ struct ra_msg { + struct icmp6hdr icmph; + __be32 reachable_time; + __be32 retrans_timer; +-}; ++} __attribute__((packed, aligned(2))); + + struct rd_msg { + struct icmp6hdr icmph; +@@ -148,10 +148,10 @@ static inline u32 ndisc_hashfn(const voi + { + const u32 *p32 = pkey; + +- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + +- (p32[1] * hash_rnd[1]) + +- (p32[2] * hash_rnd[2]) + +- (p32[3] * hash_rnd[3])); ++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + ++ (net_hdr_word(&p32[1]) * hash_rnd[1]) + ++ (net_hdr_word(&p32[2]) * hash_rnd[2]) + ++ (net_hdr_word(&p32[3]) * hash_rnd[3])); + } + + static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) +@@ -168,8 +168,10 @@ static inline struct neighbour *__ipv6_n + n = rcu_dereference_bh(n->next)) { + u32 *n32 = (u32 *) n->primary_key; + if (n->dev == dev && +- ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | +- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) ++ ((n32[0] ^ net_hdr_word(&p32[0])) | ++ (n32[1] ^ net_hdr_word(&p32[1])) | ++ (n32[2] ^ net_hdr_word(&p32[2])) | ++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0) + return n; + } + +--- a/net/sched/cls_u32.c ++++ b/net/sched/cls_u32.c +@@ -148,7 +148,7 @@ next_knode: + data = skb_header_pointer(skb, toff, 4, &hdata); + if (!data) + goto out; +- if ((*data ^ key->val) & key->mask) { ++ if ((net_hdr_word(data) ^ key->val) & key->mask) { + n = rcu_dereference_bh(n->next); + goto next_knode; + } +@@ -201,8 +201,8 @@ check_terminal: + &hdata); + if (!data) + goto out; +- sel = ht->divisor & u32_hash_fold(*data, &n->sel, +- n->fshift); ++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), ++ &n->sel, n->fshift); + } + if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) + goto next_ht; +--- a/net/ipv6/ip6_offload.c ++++ b/net/ipv6/ip6_offload.c +@@ -221,7 +221,7 @@ static struct sk_buff **ipv6_gro_receive + continue; + + iph2 = (struct ipv6hdr *)(p->data + off); +- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; ++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); + + /* All fields must match except length and Traffic Class. + * XXX skbs on the gro_list have all been parsed and pulled +--- a/include/net/addrconf.h ++++ b/include/net/addrconf.h +@@ -43,7 +43,7 @@ struct prefix_info { + __be32 reserved2; + + struct in6_addr prefix; +-}; ++} __attribute__((packed, aligned(2))); + + + #include +--- a/include/net/inet_ecn.h ++++ b/include/net/inet_ecn.h +@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct + { + if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) + return 0; +- *(__be32*)iph |= htonl(INET_ECN_CE << 20); ++ net_hdr_word(iph) |= htonl(INET_ECN_CE << 20); + return 1; + } + + static inline void IP6_ECN_clear(struct ipv6hdr *iph) + { +- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); ++ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); + } + + static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) +--- a/include/net/ipv6.h ++++ b/include/net/ipv6.h +@@ -109,7 +109,7 @@ struct frag_hdr { + __u8 reserved; + __be16 frag_off; + __be32 identification; +-}; ++} __attribute__((packed, aligned(2))); + + #define IP6_MF 0x0001 + #define IP6_OFFSET 0xFFF8 +@@ -398,8 +398,8 @@ static inline void __ipv6_addr_set_half( + } + #endif + #endif +- addr[0] = wh; +- addr[1] = wl; ++ net_hdr_word(&addr[0]) = wh; ++ net_hdr_word(&addr[1]) = wl; + } + + static inline void ipv6_addr_set(struct in6_addr *addr, +@@ -458,6 +458,8 @@ static inline bool ipv6_prefix_equal(con + const __be32 *a1 = addr1->s6_addr32; + const __be32 *a2 = addr2->s6_addr32; + unsigned int pdw, pbi; ++ /* Used for last <32-bit fraction of prefix */ ++ u32 pbia1, pbia2; + + /* check complete u32 in prefix */ + pdw = prefixlen >> 5; +@@ -466,7 +468,9 @@ static inline bool ipv6_prefix_equal(con + + /* check incomplete u32 in prefix */ + pbi = prefixlen & 0x1f; +- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) ++ pbia1 = net_hdr_word(&a1[pdw]); ++ pbia2 = net_hdr_word(&a2[pdw]); ++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) + return false; + + return true; +@@ -609,13 +613,13 @@ static inline void ipv6_addr_set_v4mappe + */ + static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) + { +- const __be32 *a1 = token1, *a2 = token2; ++ const struct in6_addr *a1 = token1, *a2 = token2; + int i; + + addrlen >>= 2; + + for (i = 0; i < addrlen; i++) { +- __be32 xb = a1[i] ^ a2[i]; ++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; + if (xb) + return i * 32 + 31 - __fls(ntohl(xb)); + } +@@ -739,17 +743,18 @@ static inline __be32 ip6_make_flowlabel( + static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, + __be32 flowlabel) + { +- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; ++ net_hdr_word((__be32 *)hdr) = ++ htonl(0x60000000 | (tclass << 20)) | flowlabel; + } + + static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; + } + + static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; + } + + static inline u8 ip6_tclass(__be32 flowinfo) +--- a/include/net/secure_seq.h ++++ b/include/net/secure_seq.h +@@ -2,6 +2,7 @@ + #define _NET_SECURE_SEQ + + #include ++#include + + u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); + u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, +--- a/include/uapi/linux/in.h ++++ b/include/uapi/linux/in.h +@@ -78,7 +78,7 @@ enum { + /* Internet address. */ + struct in_addr { + __be32 s_addr; +-}; ++} __attribute__((packed, aligned(2))); + + #define IP_TOS 1 + #define IP_TTL 2 +--- a/net/core/secure_seq.c ++++ b/net/core/secure_seq.c +@@ -46,11 +46,12 @@ __u32 secure_tcpv6_sequence_number(const + u32 secret[MD5_MESSAGE_BYTES / 4]; + u32 hash[MD5_DIGEST_WORDS]; + u32 i; ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + (__force u32)daddr[i]; ++ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + + (((__force u16)sport << 16) + (__force u16)dport); + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) +@@ -68,11 +69,12 @@ u32 secure_ipv6_port_ephemeral(const __b + u32 secret[MD5_MESSAGE_BYTES / 4]; + u32 hash[MD5_DIGEST_WORDS]; + u32 i; ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + (__force u32) daddr[i]; ++ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + (__force u32)dport; + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) + secret[i] = net_secret[i]; +@@ -150,11 +152,12 @@ u64 secure_dccpv6_sequence_number(__be32 + u32 hash[MD5_DIGEST_WORDS]; + u64 seq; + u32 i; ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + daddr[i]; ++ secret[i] = net_secret[i] + daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + + (((__force u16)sport << 16) + (__force u16)dport); + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) +--- a/net/ipv6/ip6_fib.c ++++ b/net/ipv6/ip6_fib.c +@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t + * See include/asm-generic/bitops/le.h. + */ + return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & +- addr[fn_bit >> 5]; ++ net_hdr_word(&addr[fn_bit >> 5]); + } + + static struct fib6_node *node_alloc(void) +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -456,7 +456,7 @@ static void tcp_sack(const struct sk_buf + + /* Fast path for timestamp-only option */ + if (length == TCPOLEN_TSTAMP_ALIGNED +- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) ++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) + | (TCPOPT_NOP << 16) + | (TCPOPT_TIMESTAMP << 8) + | TCPOLEN_TIMESTAMP)) +--- a/net/xfrm/xfrm_input.c ++++ b/net/xfrm/xfrm_input.c +@@ -152,8 +152,8 @@ int xfrm_parse_spi(struct sk_buff *skb, + if (!pskb_may_pull(skb, hlen)) + return -EINVAL; + +- *spi = *(__be32 *)(skb_transport_header(skb) + offset); +- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); ++ *spi = net_hdr_word(skb_transport_header(skb) + offset); ++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); + return 0; + } + +--- a/net/ipv4/tcp_input.c ++++ b/net/ipv4/tcp_input.c +@@ -3677,14 +3677,16 @@ static bool tcp_parse_aligned_timestamp( + { + const __be32 *ptr = (const __be32 *)(th + 1); + +- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) +- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { ++ if (net_hdr_word(ptr) == ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { + tp->rx_opt.saw_tstamp = 1; + ++ptr; +- tp->rx_opt.rcv_tsval = ntohl(*ptr); ++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); + ++ptr; +- if (*ptr) +- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; ++ if (net_hdr_word(ptr)) ++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - ++ tp->tsoffset; + else + tp->rx_opt.rcv_tsecr = 0; + return true; +--- a/include/uapi/linux/if_pppox.h ++++ b/include/uapi/linux/if_pppox.h +@@ -47,6 +47,7 @@ struct pppoe_addr { + */ + struct pptp_addr { + __u16 call_id; ++ __u16 pad; + struct in_addr sin_addr; + }; + +--- a/net/ipv6/netfilter/nf_log_ipv6.c ++++ b/net/ipv6/netfilter/nf_log_ipv6.c +@@ -63,9 +63,9 @@ static void dump_ipv6_packet(struct nf_l + /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ + nf_log_buf_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", + ntohs(ih->payload_len) + sizeof(struct ipv6hdr), +- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, ++ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, + ih->hop_limit, +- (ntohl(*(__be32 *)ih) & 0x000fffff)); ++ (ntohl(net_hdr_word(ih)) & 0x000fffff)); + + fragment = 0; + ptr = ip6hoff + sizeof(struct ipv6hdr);