From: Mario Six Date: Fri, 26 Jan 2018 13:43:42 +0000 (+0100) Subject: cfi_flash: Remove unnecessary braces X-Git-Tag: v2018.03-rc1~10^2~14 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4f89da49e728653fbf4ac5d9b741be4f61496b25;p=oweals%2Fu-boot.git cfi_flash: Remove unnecessary braces "==" and "!=" bind tighter than the boolean operators, so parentheses around them in compound logical statements are unnecessary. Fix all instances where this occurs. Signed-off-by: Mario Six Signed-off-by: Stefan Roese --- diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index a21c407ed7..0a24e9173a 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -611,7 +611,7 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector, case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: - if ((retcode == ERR_OK) && + if (retcode == ERR_OK && !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf("Flash %s error at address %lx\n", prompt, @@ -758,7 +758,7 @@ static flash_sect_t find_sector(flash_info_t *info, ulong addr) static flash_info_t *saved_info; /* previously used flash bank */ flash_sect_t sector = saved_sector; - if ((info != saved_info) || (sector >= info->sector_count)) + if (info != saved_info || sector >= info->sector_count) sector = 0; while ((info->start[sector] < addr) && @@ -1059,7 +1059,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) puts("Can't erase unknown flash type - aborted\n"); return 1; } - if ((s_first < 0) || (s_first > s_last)) { + if (s_first < 0 || s_first > s_last) { puts("- no sectors to erase\n"); return 1; } @@ -1247,7 +1247,7 @@ void flash_print_info(flash_info_t *info) printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", info->device_id2); } - if ((info->vendor == CFI_CMDSET_AMD_STANDARD) && (info->legacy_unlock)) + if (info->vendor == CFI_CMDSET_AMD_STANDARD && info->legacy_unlock) printf("\n Advanced Sector Protection (PPB) enabled"); printf("\n Erase timeout: %ld ms, write timeout: %ld ms\n", info->erase_blk_tout, @@ -1291,7 +1291,7 @@ void flash_print_info(flash_info_t *info) #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \ if (flash_verbose) { \ dots -= dots_sub; \ - if ((scale > 0) && (dots <= 0)) { \ + if (scale > 0 && dots <= 0) { \ if ((digit % 5) == 0) \ printf("%d", digit / 5); \ else \ @@ -1577,7 +1577,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) * On some of Intel's flash chips (marked via legacy_unlock) * unprotect unprotects all locking. */ - if ((prot == 0) && (info->legacy_unlock)) { + if (prot == 0 && info->legacy_unlock) { flash_sect_t i; for (i = 0; i < info->sector_count; i++) { @@ -1636,10 +1636,10 @@ static void cfi_reverse_geometry(struct cfi_qry *qry) u32 tmp; for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) { - tmp = get_unaligned(&(qry->erase_region_info[i])); - put_unaligned(get_unaligned(&(qry->erase_region_info[j])), - &(qry->erase_region_info[i])); - put_unaligned(tmp, &(qry->erase_region_info[j])); + tmp = get_unaligned(&qry->erase_region_info[i]); + put_unaligned(get_unaligned(&qry->erase_region_info[j]), + &qry->erase_region_info[i]); + put_unaligned(tmp, &qry->erase_region_info[j]); } } @@ -1919,11 +1919,11 @@ static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry) * in compatibility mode */ if (/* x8/x16 in x8 mode */ - ((info->chipwidth == FLASH_CFI_BY8) && - (info->interface == FLASH_CFI_X8X16)) || + (info->chipwidth == FLASH_CFI_BY8 && + info->interface == FLASH_CFI_X8X16) || /* x16/x32 in x16 mode */ - ((info->chipwidth == FLASH_CFI_BY16) && - (info->interface == FLASH_CFI_X16X32))) + (info->chipwidth == FLASH_CFI_BY16 && + info->interface == FLASH_CFI_X16X32)) { info->addr_unlock1 = 0xaaa; info->addr_unlock2 = 0x555; @@ -2040,8 +2040,8 @@ static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry) * There's an app note from Numonyx on this issue. * So adjust the buffer size for M29EW while operating in 8-bit mode */ - if (((qry->max_buf_write_size) > 0x8) && - (info->device_id == 0x7E) && + if (qry->max_buf_write_size > 0x8 && + info->device_id == 0x7E && (info->device_id2 == 0x2201 || info->device_id2 == 0x2301 || info->device_id2 == 0x2801 || @@ -2081,8 +2081,8 @@ ulong flash_get_size(phys_addr_t base, int banknum) info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE); if (flash_detect_cfi(info, &qry)) { - info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id))); - info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr))); + info->vendor = le16_to_cpu(get_unaligned(&qry.p_id)); + info->ext_addr = le16_to_cpu(get_unaligned(&qry.p_adr)); num_erase_regions = qry.num_erase_regions; if (info->ext_addr) { @@ -2146,8 +2146,8 @@ ulong flash_get_size(phys_addr_t base, int banknum) size_ratio = info->portwidth / info->chipwidth; /* if the chip is x8/x16 reduce the ratio by half */ - if ((info->interface == FLASH_CFI_X8X16) && - (info->chipwidth == FLASH_CFI_BY8)) { + if (info->interface == FLASH_CFI_X8X16 && + info->chipwidth == FLASH_CFI_BY8) { size_ratio >>= 1; } debug("size_ratio %d port %d bits chip %d bits\n", @@ -2157,7 +2157,7 @@ ulong flash_get_size(phys_addr_t base, int banknum) /* multiply the size by the number of chips */ info->size *= size_ratio; max_size = cfi_flash_bank_size(banknum); - if (max_size && (info->size > max_size)) { + if (max_size && info->size > max_size) { debug("[truncated from %ldMiB]", info->size >> 20); info->size = max_size; } @@ -2172,7 +2172,7 @@ ulong flash_get_size(phys_addr_t base, int banknum) } tmp = le32_to_cpu(get_unaligned( - &(qry.erase_region_info[i]))); + &qry.erase_region_info[i])); debug("erase region %u: 0x%08lx\n", i, tmp); erase_region_count = (tmp & 0xffff) + 1; @@ -2261,8 +2261,8 @@ ulong flash_get_size(phys_addr_t base, int banknum) /* round up when converting to ms */ info->write_tout = (tmp + 999) / 1000; info->flash_id = FLASH_MAN_CFI; - if ((info->interface == FLASH_CFI_X8X16) && - (info->chipwidth == FLASH_CFI_BY8)) { + if (info->interface == FLASH_CFI_X8X16 && + info->chipwidth == FLASH_CFI_BY8) { /* XXX - Need to test on x8/x16 in parallel. */ info->portwidth >>= 1; }