From: Simon Glass Date: Fri, 26 Apr 2019 03:58:49 +0000 (-0600) Subject: x86: broadwell: Allow SDRAM init from SPL X-Git-Tag: v2019.07-rc2~14^2~31 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4eabf1e54b7ad1d1d7511af65570743ed756f85c;p=oweals%2Fu-boot.git x86: broadwell: Allow SDRAM init from SPL At present, for broadwell, SDRAM is always set up in U-Boot proper since the 64-bit mode (which uses SDRAM init in SPL) is not supported. Update the code to allow SDRAM init in SPL instead so that U-Boot proper can be loaded into SDRAM and run from there. This allows U-Boot to be compressed to reduce space, since it is not necessary to run it directly from flash. It could later allow us to support 64-bit U-Boot on broadwell. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile index d3785aabdf..d464507e6c 100644 --- a/arch/x86/cpu/broadwell/Makefile +++ b/arch/x86/cpu/broadwell/Makefile @@ -13,4 +13,4 @@ obj-y += pinctrl_broadwell.o obj-y += power_state.o obj-y += refcode.o obj-y += sata.o -obj-y += sdram.o +obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o diff --git a/arch/x86/cpu/broadwell/northbridge.c b/arch/x86/cpu/broadwell/northbridge.c index 3055880bb7..4bcab78556 100644 --- a/arch/x86/cpu/broadwell/northbridge.c +++ b/arch/x86/cpu/broadwell/northbridge.c @@ -6,8 +6,108 @@ #include #include #include +#include #include #include +#include + +__weak asmlinkage void sdram_console_tx_byte(unsigned char byte) +{ +#ifdef DEBUG + putc(byte); +#endif +} + +void broadwell_fill_pei_data(struct pei_data *pei_data) +{ + pei_data->pei_version = PEI_VERSION; + pei_data->board_type = BOARD_TYPE_ULT; + pei_data->pciexbar = MCFG_BASE_ADDRESS; + pei_data->smbusbar = SMBUS_BASE_ADDRESS; + pei_data->ehcibar = EARLY_EHCI_BAR; + pei_data->xhcibar = EARLY_XHCI_BAR; + pei_data->gttbar = EARLY_GTT_BAR; + pei_data->pmbase = ACPI_BASE_ADDRESS; + pei_data->gpiobase = GPIO_BASE_ADDRESS; + pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE; + pei_data->temp_mmio_base = EARLY_TEMP_MMIO; + pei_data->tx_byte = sdram_console_tx_byte; + pei_data->ddr_refresh_2x = 1; +} + +static void pei_data_usb2_port(struct pei_data *pei_data, int port, uint length, + uint enable, uint oc_pin, uint location) +{ + pei_data->usb2_ports[port].length = length; + pei_data->usb2_ports[port].enable = enable; + pei_data->usb2_ports[port].oc_pin = oc_pin; + pei_data->usb2_ports[port].location = location; +} + +static void pei_data_usb3_port(struct pei_data *pei_data, int port, uint enable, + uint oc_pin, uint fixed_eq) +{ + pei_data->usb3_ports[port].enable = enable; + pei_data->usb3_ports[port].oc_pin = oc_pin; + pei_data->usb3_ports[port].fixed_eq = fixed_eq; +} + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + /* DQ byte map for Samus board */ + const u8 dq_map[2][6][2] = { + { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 }, + { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } }, + { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 }, + { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } }; + /* DQS CPU<>DRAM map for Samus board */ + const u8 dqs_map[2][8] = { + { 2, 0, 1, 3, 6, 4, 7, 5 }, + { 2, 1, 0, 3, 6, 5, 4, 7 } }; + + pei_data->ec_present = 1; + + /* One installed DIMM per channel */ + pei_data->dimm_channel0_disabled = 2; + pei_data->dimm_channel1_disabled = 2; + + memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); + memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); + + /* P0: HOST PORT */ + pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0, + USB_PORT_BACK_PANEL); + /* P1: HOST PORT */ + pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1, + USB_PORT_BACK_PANEL); + /* P2: RAIDEN */ + pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP, + USB_PORT_BACK_PANEL); + /* P3: SD CARD */ + pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP, + USB_PORT_INTERNAL); + /* P4: RAIDEN */ + pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP, + USB_PORT_BACK_PANEL); + /* P5: WWAN (Disabled) */ + pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP, + USB_PORT_SKIP); + /* P6: CAMERA */ + pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP, + USB_PORT_INTERNAL); + /* P7: BT */ + pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP, + USB_PORT_INTERNAL); + + /* P1: HOST PORT */ + pei_data_usb3_port(pei_data, 0, 1, 0, 0); + /* P2: HOST PORT */ + pei_data_usb3_port(pei_data, 1, 1, 1, 0); + /* P3: RAIDEN */ + pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0); + /* P4: RAIDEN */ + pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0); +} static int broadwell_northbridge_early_init(struct udevice *dev) { diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c index 1b9f9840c6..b8450cc9d2 100644 --- a/arch/x86/cpu/broadwell/sdram.c +++ b/arch/x86/cpu/broadwell/sdram.c @@ -34,99 +34,6 @@ int dram_init_banksize(void) return 0; } -void broadwell_fill_pei_data(struct pei_data *pei_data) -{ - pei_data->pei_version = PEI_VERSION; - pei_data->board_type = BOARD_TYPE_ULT; - pei_data->pciexbar = MCFG_BASE_ADDRESS; - pei_data->smbusbar = SMBUS_BASE_ADDRESS; - pei_data->ehcibar = EARLY_EHCI_BAR; - pei_data->xhcibar = EARLY_XHCI_BAR; - pei_data->gttbar = EARLY_GTT_BAR; - pei_data->pmbase = ACPI_BASE_ADDRESS; - pei_data->gpiobase = GPIO_BASE_ADDRESS; - pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE; - pei_data->temp_mmio_base = EARLY_TEMP_MMIO; - pei_data->tx_byte = sdram_console_tx_byte; - pei_data->ddr_refresh_2x = 1; -} - -static inline void pei_data_usb2_port(struct pei_data *pei_data, int port, - uint16_t length, uint8_t enable, - uint8_t oc_pin, uint8_t location) -{ - pei_data->usb2_ports[port].length = length; - pei_data->usb2_ports[port].enable = enable; - pei_data->usb2_ports[port].oc_pin = oc_pin; - pei_data->usb2_ports[port].location = location; -} - -static inline void pei_data_usb3_port(struct pei_data *pei_data, int port, - uint8_t enable, uint8_t oc_pin, - uint8_t fixed_eq) -{ - pei_data->usb3_ports[port].enable = enable; - pei_data->usb3_ports[port].oc_pin = oc_pin; - pei_data->usb3_ports[port].fixed_eq = fixed_eq; -} - -void mainboard_fill_pei_data(struct pei_data *pei_data) -{ - /* DQ byte map for Samus board */ - const u8 dq_map[2][6][2] = { - { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 }, - { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } }, - { { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 }, - { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } }; - /* DQS CPU<>DRAM map for Samus board */ - const u8 dqs_map[2][8] = { - { 2, 0, 1, 3, 6, 4, 7, 5 }, - { 2, 1, 0, 3, 6, 5, 4, 7 } }; - - pei_data->ec_present = 1; - - /* One installed DIMM per channel */ - pei_data->dimm_channel0_disabled = 2; - pei_data->dimm_channel1_disabled = 2; - - memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); - memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); - - /* P0: HOST PORT */ - pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0, - USB_PORT_BACK_PANEL); - /* P1: HOST PORT */ - pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1, - USB_PORT_BACK_PANEL); - /* P2: RAIDEN */ - pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP, - USB_PORT_BACK_PANEL); - /* P3: SD CARD */ - pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP, - USB_PORT_INTERNAL); - /* P4: RAIDEN */ - pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP, - USB_PORT_BACK_PANEL); - /* P5: WWAN (Disabled) */ - pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP, - USB_PORT_SKIP); - /* P6: CAMERA */ - pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP, - USB_PORT_INTERNAL); - /* P7: BT */ - pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP, - USB_PORT_INTERNAL); - - /* P1: HOST PORT */ - pei_data_usb3_port(pei_data, 0, 1, 0, 0); - /* P2: HOST PORT */ - pei_data_usb3_port(pei_data, 1, 1, 1, 0); - /* P3: RAIDEN */ - pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0); - /* P4: RAIDEN */ - pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0); -} - static unsigned long get_top_of_ram(struct udevice *dev) { /*