From: Simon Goldschmidt Date: Thu, 28 Mar 2019 20:11:49 +0000 (+0100) Subject: rtc: m41t62: add compatible for m41t82 X-Git-Tag: v2019.07-rc1~6^2~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4e829e9841f80c540150a14b4d12169139a0b7b9;p=oweals%2Fu-boot.git rtc: m41t62: add compatible for m41t82 This adds a compatible string for m41t82. This ensures that this driver can be used for m41t82 in DM mode, too (asit was usable for this model in non-DM mode before). In addition, the HT bit has to be reset during probe, since the m41t82 chip sets it when entering battery standby mode. This patch ensures this driver works on socfpga_socrates. Signed-off-by: Simon Goldschmidt Reviewed-by: Stefan Roese --- diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c index 2ee7e00b02..6161b76712 100644 --- a/drivers/rtc/m41t62.c +++ b/drivers/rtc/m41t62.c @@ -155,6 +155,15 @@ static int m41t62_rtc_reset(struct udevice *dev) return ret; } +/* + * Make sure HT bit is cleared. This bit is set on entering battery backup + * mode, so do this before the first read access. + */ +static int m41t62_rtc_probe(struct udevice *dev) +{ + return m41t62_rtc_reset(dev); +} + static const struct rtc_ops m41t62_rtc_ops = { .get = m41t62_rtc_get, .set = m41t62_rtc_set, @@ -163,6 +172,7 @@ static const struct rtc_ops m41t62_rtc_ops = { static const struct udevice_id m41t62_rtc_ids[] = { { .compatible = "st,m41t62" }, + { .compatible = "st,m41t82" }, { .compatible = "microcrystal,rv4162" }, { } }; @@ -172,6 +182,7 @@ U_BOOT_DRIVER(rtc_m41t62) = { .id = UCLASS_RTC, .of_match = m41t62_rtc_ids, .ops = &m41t62_rtc_ops, + .probe = &m41t62_rtc_probe, }; #else /* NON DM RTC code - will be removed */