From: Mathias Kresin Date: Thu, 26 May 2016 21:11:16 +0000 (+0200) Subject: lantiq: VGV7510KW22 - fix pinmux configuration X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4d5db712e3618a37e85e383da82d131df37ba3e9;p=librecmc%2Flibrecmc.git lantiq: VGV7510KW22 - fix pinmux configuration The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi index c9045fa7ef..ed3a6e8d78 100644 --- a/target/linux/lantiq/dts/VGV7510KW22.dtsi +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -55,18 +55,11 @@ lantiq,pull = <1>; }; gphy-leds { - lantiq,groups = "gphy0 led1", + lantiq,groups = "gphy0 led0", "gphy0 led1", "gphy1 led0", "gphy1 led1"; lantiq,function = "gphy"; lantiq,open-drain = <0>; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; lantiq,pull = <2>; - lantiq,open-drain = <0>; lantiq,output = <1>; }; mdio { @@ -79,26 +72,9 @@ lantiq,pull = <0>; lantiq,output = <1>; }; - spi { - lantiq,groups = "spi_di", "spi_do", "spi_clk"; - lantiq,function = "spi"; - }; }; }; - stp: stp@E100BB0 { - compatible = "lantiq,gpio-stp-xway"; - reg = <0xE100BB0 0x40>; - #gpio-cells = <2>; - gpio-controller; - - lantiq,shadow = <0xff>; - lantiq,groups = <0x1>; - lantiq,dsl = <0x0>; - lantiq,phy1 = <0x7>; - lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */ - }; - ifxhcd@E101000 { status = "okay"; gpios = <&gpio 47 0>;