From: Jon Loeliger Date: Wed, 31 May 2006 16:24:28 +0000 (-0500) Subject: Moved mpc8641hpcn_board_reset() out of cpu/ into board/. X-Git-Tag: U-Boot-1_1_6~20^2~1^2~58^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4d3d729c16c392d2982d3266b659d333c927697d;p=oweals%2Fu-boot.git Moved mpc8641hpcn_board_reset() out of cpu/ into board/. Signed-off-by: Jon Loeliger --- diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c index d02a7eff3c..dbc9b5e9b8 100644 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ b/board/mpc8641hpcn/mpc8641hpcn.c @@ -25,6 +25,7 @@ */ #include +#include #include #include #include @@ -35,6 +36,9 @@ extern void ft_cpu_setup(void *blob, bd_t *bd); #endif +#include "pixis.h" + + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif @@ -292,4 +296,93 @@ ft_board_setup(void *blob, bd_t *bd) #endif +void +mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char cmd; + ulong val; + ulong corepll; + + if (argc > 1) { + cmd = argv[1][1]; + switch (cmd) { + case 'f': /* reset with frequency changed */ + if (argc < 5) + goto my_usage; + read_from_px_regs(0); + + val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); + + corepll = strfractoint(argv[3]); + val = val + set_px_corepll(corepll); + val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); + if (val == 3) { + printf("Setting registers VCFGEN0 and VCTL\n"); + read_from_px_regs(1); + printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); + set_px_go(); + } else + goto my_usage; + + while (1); /* Not reached */ + + case 'l': + if (argv[2][1] == 'f') { + read_from_px_regs(0); + read_from_px_regs_altbank(0); + /* reset with frequency changed */ + val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); + + corepll = strfractoint(argv[4]); + val = val + set_px_corepll(corepll); + val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10)); + if (val == 3) { + printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs(1); + read_from_px_regs_altbank(1); + printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); + set_px_go_with_watchdog(); + } else + goto my_usage; + + while(1); /* Not reached */ + + } else if(argv[2][1] == 'd'){ + /* Reset from next bank without changing frequencies but with watchdog timer enabled */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); + set_px_go_with_watchdog(); + while(1); /* Not reached */ + + } else { + /* Reset from next bank without changing frequency and without watchdog timer enabled */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + if(argc > 2) + goto my_usage; + printf("Setting registers VCFGNE1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + printf("Resetting board to boot from the other bank....\n"); + set_px_go(); + } + + default: + goto my_usage; + } + + my_usage: + printf("\nUsage: reset cf \n"); + printf(" reset altbank [cf ]\n"); + printf("For example: reset cf 40 2.5 10\n"); + printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); + return; + } else + out8(PIXIS_BASE+PIXIS_RST,0); +} diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 504ba62404..60ce29ccdf 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -32,7 +32,10 @@ #include #endif -#include "../board/mpc8641hpcn/pixis.h" +#ifdef CONFIG_MPC8641HPCN +extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, + int argc, char *argv[]); +#endif int checkcpu (void) @@ -146,9 +149,7 @@ soft_restart(unsigned long addr) void do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - char cmd; - ulong addr, val; - ulong corepll; + ulong addr; #ifdef CFG_RESET_ADDRESS addr = CFG_RESET_ADDRESS; @@ -181,86 +182,7 @@ do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #else /* CONFIG_MPC8641HPCN */ - if (argc > 1) { - cmd = argv[1][1]; - switch(cmd) { - case 'f': /* reset with frequency changed */ - if (argc < 5) - goto my_usage; - read_from_px_regs(0); - - val = set_px_sysclk(simple_strtoul(argv[2],NULL,10)); - - corepll = strfractoint(argv[3]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[4], - NULL, 10)); - if (val == 3) { - printf("Setting registers VCFGEN0 and VCTL\n"); - read_from_px_regs(1); - printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); - set_px_go(); - } else - goto my_usage; - - while (1); /* Not reached */ - - case 'l': - if (argv[2][1] == 'f') { - read_from_px_regs(0); - read_from_px_regs_altbank(0); - /* reset with frequency changed */ - val = set_px_sysclk(simple_strtoul(argv[3],NULL,10)); - - corepll = strfractoint(argv[4]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10)); - if (val == 3) { - printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs(1); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); - set_px_go_with_watchdog(); - } else - goto my_usage; - - while(1); /* Not reached */ - } else if(argv[2][1] == 'd'){ - /* Reset from next bank without changing frequencies but with watchdog timer enabled */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); - set_px_go_with_watchdog(); - while(1); /* Not reached */ - } else { - /* Reset from next bank without changing frequency and without watchdog timer enabled */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - if(argc > 2) - goto my_usage; - printf("Setting registers VCFGNE1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - printf("Resetting board to boot from the other bank....\n"); - set_px_go(); - } - - default: - goto my_usage; - } - -my_usage: - printf("\nUsage: reset cf \n"); - printf(" reset altbank [cf ]\n"); - printf("For example: reset cf 40 2.5 10\n"); - printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); - return; - } else - out8(PIXIS_BASE+PIXIS_RST,0); + mpc8641_reset_board(cmdtp, flag, argc, argv); #endif /* !CONFIG_MPC8641HPCN */