From: Felix Fietkau Date: Wed, 21 May 2014 12:34:02 +0000 (+0000) Subject: iwinfo: un-export internal api header files X-Git-Tag: reboot~7226 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4c9fc236c9f1811f84eef5a432f0582d924b7d0a;p=oweals%2Fopenwrt.git iwinfo: un-export internal api header files Signed-off-by: Felix Fietkau SVN-Revision: 40815 --- diff --git a/package/network/utils/iwinfo/src/api/broadcom.h b/package/network/utils/iwinfo/src/api/broadcom.h new file mode 100644 index 0000000000..c7aa33e415 --- /dev/null +++ b/package/network/utils/iwinfo/src/api/broadcom.h @@ -0,0 +1,146 @@ +/* + * Custom OID/ioctl definitions for + * Broadcom 802.11abg Networking Device Driver + * + * Definitions subject to change without notice. + * + * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + */ + +#ifndef _BROADCOM_H +#define _BROADCOM_H + +#define WL_MCSSET_LEN 16 +#define WL_MAX_STA_COUNT 32 + +#define WL_BSS_RSSI_OFFSET 82 +#define WL_BSS_NOISE_OFFSET 84 + +#define WLC_IOCTL_MAGIC 0x14e46c77 +#define WLC_IOCTL_MAXLEN 8192 + +#define WLC_CNTRY_BUF_SZ 4 + +#define WLC_GET_MAGIC 0 +#define WLC_GET_RATE 12 +#define WLC_GET_INFRA 19 +#define WLC_GET_AUTH 21 +#define WLC_GET_BSSID 23 +#define WLC_GET_SSID 25 +#define WLC_GET_CHANNEL 29 +#define WLC_GET_PHYTYPE 39 +#define WLC_GET_PASSIVE 48 +#define WLC_GET_COUNTRY 83 +#define WLC_GET_REVINFO 98 +#define WLC_GET_AP 117 +#define WLC_GET_RSSI 127 +#define WLC_GET_WSEC 133 +#define WLC_GET_PHY_NOISE 135 +#define WLC_GET_BSS_INFO 136 +#define WLC_GET_BANDLIST 140 +#define WLC_GET_ASSOCLIST 159 +#define WLC_GET_WPA_AUTH 164 +#define WLC_GET_COUNTRY_LIST 261 +#define WLC_GET_VAR 262 + +#define WLC_PHY_TYPE_A 0 +#define WLC_PHY_TYPE_B 1 +#define WLC_PHY_TYPE_G 2 +#define WLC_PHY_TYPE_N 4 +#define WLC_PHY_TYPE_LP 5 + +#define WLC_BAND_5G 1 +#define WLC_BAND_2G 2 +#define WLC_BAND_ALL 3 + + +struct wl_ether_addr { + uint8_t octet[6]; +}; + +struct wl_maclist { + uint count; + struct wl_ether_addr ea[1]; +}; + +typedef struct wl_sta_rssi { + int rssi; + char mac[6]; + uint16_t foo; +} wl_sta_rssi_t; + +#define WL_NUMRATES 255 /* max # of rates in a rateset */ +typedef struct wl_rateset { + uint32_t count; /* # rates in this set */ + uint8_t rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ +} wl_rateset_t; + +typedef struct wl_sta_info { + uint16_t ver; /* version of this struct */ + uint16_t len; /* length in bytes of this structure */ + uint16_t cap; /* sta's advertised capabilities */ + uint32_t flags; /* flags defined below */ + uint32_t idle; /* time since data pkt rx'd from sta */ + unsigned char ea[6]; /* Station address */ + wl_rateset_t rateset; /* rateset in use */ + uint32_t in; /* seconds elapsed since associated */ + uint32_t listen_interval_inms; /* Min Listen interval in ms for this STA */ + uint32_t tx_pkts; /* # of packets transmitted */ + uint32_t tx_failures; /* # of packets failed */ + uint32_t rx_ucast_pkts; /* # of unicast packets received */ + uint32_t rx_mcast_pkts; /* # of multicast packets received */ + uint32_t tx_rate; /* Rate of last successful tx frame */ + uint32_t rx_rate; /* Rate of last successful rx frame */ +} wl_sta_info_t; + +typedef struct wlc_ssid { + uint32_t ssid_len; + unsigned char ssid[32]; +} wlc_ssid_t; + +/* Linux network driver ioctl encoding */ +typedef struct wl_ioctl { + uint32_t cmd; /* common ioctl definition */ + void *buf; /* pointer to user buffer */ + uint32_t len; /* length of user buffer */ + uint8_t set; /* get or set request (optional) */ + uint32_t used; /* bytes read or written (optional) */ + uint32_t needed; /* bytes needed (optional) */ +} wl_ioctl_t; + +/* Revision info */ +typedef struct wlc_rev_info { + uint vendorid; /* PCI vendor id */ + uint deviceid; /* device id of chip */ + uint radiorev; /* radio revision */ + uint chiprev; /* chip revision */ + uint corerev; /* core revision */ + uint boardid; /* board identifier (usu. PCI sub-device id) */ + uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ + uint boardrev; /* board revision */ + uint driverrev; /* driver version */ + uint ucoderev; /* microcode version */ + uint bus; /* bus type */ + uint chipnum; /* chip number */ + uint phytype; /* phy type */ + uint phyrev; /* phy revision */ + uint anarev; /* anacore rev */ +} wlc_rev_info_t; + +typedef struct wl_country_list { + uint32_t buflen; + uint32_t band_set; + uint32_t band; + uint32_t count; + char country_abbrev[1]; +} wl_country_list_t; + + +#endif diff --git a/package/network/utils/iwinfo/src/api/madwifi.h b/package/network/utils/iwinfo/src/api/madwifi.h new file mode 100644 index 0000000000..80d32e1959 --- /dev/null +++ b/package/network/utils/iwinfo/src/api/madwifi.h @@ -0,0 +1,160 @@ +/* + * Header bits derived from MadWifi source: + * Copyright (c) 2001 Atsushi Onoe + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Distributed under the terms of the GPLv2 license. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _MADWIFI_H +#define _MADWIFI_H + +/* ieee80211.h */ +#define IEEE80211_ADDR_LEN 6 +#define IEEE80211_RATE_VAL 0x7f +#define IEEE80211_SEQ_SEQ_MASK 0xfff0 +#define IEEE80211_SEQ_SEQ_SHIFT 4 + + +/* ieee80211_crypto.h */ +#define IEEE80211_KEYBUF_SIZE 16 +#define IEEE80211_MICBUF_SIZE 16 +#define IEEE80211_TID_SIZE 17 + +#define IEEE80211_CIPHER_WEP 0 +#define IEEE80211_CIPHER_TKIP 1 +#define IEEE80211_CIPHER_AES_OCB 2 +#define IEEE80211_CIPHER_AES_CCM 3 +#define IEEE80211_CIPHER_CKIP 5 +#define IEEE80211_CIPHER_NONE 6 +#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE + 1) + + +/* ieee80211_ioctl.h */ +#define IEEE80211_KEY_DEFAULT 0x80 +#define IEEE80211_CHAN_MAX 255 +#define IEEE80211_CHAN_BYTES 32 +#define IEEE80211_RATE_MAXSIZE 15 + +#define IEEE80211_IOCTL_GETKEY (SIOCDEVPRIVATE+3) +#define IEEE80211_IOCTL_STA_STATS (SIOCDEVPRIVATE+5) +#define IEEE80211_IOCTL_STA_INFO (SIOCDEVPRIVATE+6) + +#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) +#define IEEE80211_IOCTL_GETMODE (SIOCIWFIRSTPRIV+3) +#define IEEE80211_IOCTL_GETCHANLIST (SIOCIWFIRSTPRIV+7) +#define IEEE80211_IOCTL_GETCHANINFO (SIOCIWFIRSTPRIV+13) + +#define SIOC80211IFCREATE (SIOCDEVPRIVATE+7) +#define SIOC80211IFDESTROY (SIOCDEVPRIVATE+8) + +#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */ +#define IEEE80211_NO_STABEACONS 0x0002 /* Do not setup the station beacon timers */ + +struct ieee80211_clone_params { + char icp_name[IFNAMSIZ]; /* device name */ + u_int16_t icp_opmode; /* operating mode */ + u_int16_t icp_flags; /* see below */ +}; + +enum ieee80211_opmode { + IEEE80211_M_STA = 1, /* infrastructure station */ + IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ + IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ + IEEE80211_M_HOSTAP = 6, /* Software Access Point */ + IEEE80211_M_MONITOR = 8, /* Monitor mode */ + IEEE80211_M_WDS = 2, /* WDS link */ +}; + +enum { + IEEE80211_PARAM_AUTHMODE = 3, /* authentication mode */ + IEEE80211_PARAM_MCASTCIPHER = 5, /* multicast/default cipher */ + IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ + IEEE80211_PARAM_UCASTCIPHERS = 7, /* unicast cipher suites */ + IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ +}; + +/* + * Authentication mode. + */ +enum ieee80211_authmode { + IEEE80211_AUTH_NONE = 0, + IEEE80211_AUTH_OPEN = 1, /* open */ + IEEE80211_AUTH_SHARED = 2, /* shared-key */ + IEEE80211_AUTH_8021X = 3, /* 802.1x */ + IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ + /* NB: these are used only for ioctls */ + IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ +}; + +struct ieee80211_channel { + u_int16_t ic_freq; /* setting in MHz */ + u_int16_t ic_flags; /* see below */ + u_int8_t ic_ieee; /* IEEE channel number */ + int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ + int8_t ic_maxpower; /* maximum tx power in dBm */ + int8_t ic_minpower; /* minimum tx power in dBm */ + u_int8_t ic_scanflags; + u_int8_t ic_idletime; /* phy idle time in % */ +}; + +struct ieee80211req_key { + u_int8_t ik_type; /* key/cipher type */ + u_int8_t ik_pad; + u_int16_t ik_keyix; /* key index */ + u_int8_t ik_keylen; /* key length in bytes */ + u_int8_t ik_flags; + u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; + u_int64_t ik_keyrsc; /* key receive sequence counter */ + u_int64_t ik_keytsc; /* key transmit sequence counter */ + u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; +}; + +struct ieee80211req_chanlist { + u_int8_t ic_channels[IEEE80211_CHAN_BYTES]; +}; + +struct ieee80211req_chaninfo { + u_int ic_nchans; + struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX]; +}; + +struct ieee80211req_sta_info { + u_int16_t isi_len; /* length (mult of 4) */ + u_int16_t isi_freq; /* MHz */ + u_int16_t isi_flags; /* channel flags */ + u_int16_t isi_state; /* state flags */ + u_int8_t isi_authmode; /* authentication algorithm */ + u_int8_t isi_rssi; + int8_t isi_noise; + u_int16_t isi_capinfo; /* capabilities */ + u_int8_t isi_athflags; /* Atheros capabilities */ + u_int8_t isi_erp; /* ERP element */ + u_int8_t isi_macaddr[IEEE80211_ADDR_LEN]; + u_int8_t isi_nrates; /* negotiated rates */ + u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE]; + u_int8_t isi_txrate; /* index to isi_rates[] */ + u_int16_t isi_ie_len; /* IE length */ + u_int16_t isi_associd; /* assoc response */ + u_int16_t isi_txpower; /* current tx power */ + u_int16_t isi_vlan; /* vlan tag */ + u_int16_t isi_txseqs[17]; /* seq to be transmitted */ + u_int16_t isi_rxseqs[17]; /* seq previous for qos frames*/ + u_int16_t isi_inact; /* inactivity timer */ + u_int8_t isi_uapsd; /* UAPSD queues */ + u_int8_t isi_opmode; /* sta operating mode */ +}; + +#endif diff --git a/package/network/utils/iwinfo/src/api/nl80211.h b/package/network/utils/iwinfo/src/api/nl80211.h new file mode 100644 index 0000000000..d73dcb8e81 --- /dev/null +++ b/package/network/utils/iwinfo/src/api/nl80211.h @@ -0,0 +1,2834 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006-2010 Johannes Berg + * Copyright 2008 Michael Wu + * Copyright 2008 Luis Carlos Cobo + * Copyright 2008 Michael Buesch + * Copyright 2008, 2009 Luis R. Rodriguez + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include + +/** + * DOC: Station handling + * + * Stations are added per interface, but a special case exists with VLAN + * interfaces. When a station is bound to an AP interface, it may be moved + * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). + * The station is still assumed to belong to the AP interface it was added + * to. + * + * TODO: need more info? + */ + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * management entities such as wpa_supplicant react to management frames + * that are not being handled by the kernel. This includes, for example, + * certain classes of action frames that cannot be handled in the kernel + * for various reasons. + * + * Frame registration is done on a per-interface basis and registrations + * cannot be removed other than by closing the socket. It is possible to + * specify a registration filter to register, for example, only for a + * certain type of action frame. In particular with action frames, those + * that userspace registers for will not be returned as unhandled by the + * driver, so that the registered application has to take responsibility + * for doing that. + * + * The type of frame that can be registered for is also dependent on the + * driver and interface type. The frame types are advertised in wiphy + * attributes so applications know what to expect. + * + * NOTE: When an interface changes type while registrations are active, + * these registrations are ignored until the interface type is + * changed again. This means that changing the interface type can + * lead to a situation that couldn't otherwise be produced, but + * any such registrations will be dormant in the sense that they + * will not be serviced, i.e. they will not receive any frames. + * + * Frame transmission allows userspace to send for example the required + * responses to action frames. It is subject to some sanity checking, + * but many frames can be transmitted. When a frame was transmitted, its + * status is indicated to the sending socket. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * DOC: Virtual interface / concurrency capabilities + * + * Some devices are able to operate with virtual MACs, they can have + * more than one virtual interface. The capability handling for this + * is a bit complex though, as there may be a number of restrictions + * on the types of concurrency that are supported. + * + * To start with, each device supports the interface types listed in + * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the + * types there no concurrency is implied. + * + * Once concurrency is desired, more attributes must be observed: + * To start with, since some interface types are purely managed in + * software, like the AP-VLAN type in mac80211 for example, there's + * an additional list of these, they can be added at any time and + * are only restricted by some semantic restrictions (e.g. AP-VLAN + * cannot be added without a corresponding AP interface). This list + * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. + * + * Further, the list of supported combinations is exported. This is + * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, + * it exports a list of "groups", and at any point in time the + * interfaces that are currently active must fall into any one of + * the advertised groups. Within each group, there are restrictions + * on the number of interfaces of different types that are supported + * and also the number of different channels, along with potentially + * some other restrictions. See &enum nl80211_if_combination_attrs. + * + * All together, these attributes define the concurrency of virtual + * interfaces that a given device supports. + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. + * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL + * instead, the support here is for backward compatibility only. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request on a %NL80211_ATTR_WIPHY or a specific get + * on an %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX + * or %NL80211_ATTR_MAC. + * + * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a + * %NL80222_CMD_NEW_BEACON message) + * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, + * parameters are like for %NL80211_CMD_SET_BEACON. + * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * + * @NL80211_CMD_GET_STATION: Get station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_STATION: Set station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by + * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. + * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all mesh paths, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set + * regulatory domain. + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. + * + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, + * partial scan results may be available + * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain + * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty + * string). If no SSID is passed, no probe requests are sent and + * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT + * if scheduled scan is not running. + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has + * stopped. The driver may issue this event at any time during a + * scheduled scan. One reason for stopping the scan is if the hardware + * does not support starting an association or a normal scan while running + * a scheduled scan. This event is also sent when the + * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface + * is brought down while a scheduled scan was running. + * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. + * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, + * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the STATUS_CODE attribute. + * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), + * sent as an event when the card/driver roamed by itself. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * + * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. + * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus + * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be + * optionally used to specify additional channel parameters. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds + * to remain on the channel. This command is also used as an event to + * notify when the requested duration starts (it may take a while for the + * driver to schedule this time due to other concurrent needs for the + * radio). + * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) + * that will be included with any events pertaining to this request; + * the cookie is also used to cancel the request. + * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a + * pending remain-on-channel duration if the desired operation has been + * completed prior to expiration of the originally requested duration. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the + * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to + * uniquely identify the request. + * This command is also used as an event to notify when a requested + * remain-on-channel duration has expired. + * + * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX + * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface + * and @NL80211_ATTR_TX_RATES the set of allowed rates. + * + * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames + * (via @NL80211_CMD_FRAME) for processing in userspace. This command + * requires an interface index, a frame type attribute (optional for + * backward compatibility reasons, if not given assumes action frames) + * and a match attribute containing the first few bytes of the frame + * that should match, e.g. a single byte for only a category match or + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This + * command is used both as a request to transmit a management frame and + * as an event indicating reception of a frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and + * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on + * which channel the frame is to be transmitted or was received. If this + * channel is not the current channel (remain-on-channel or the + * operational channel) the device will switch to the given channel and + * transmit the frame, optionally waiting for a response for the time + * specified using %NL80211_ATTR_DURATION. When called, this operation + * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the + * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. + * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this + * command may be used with the corresponding cookie to cancel the wait + * time if it is known that it is no longer necessary. + * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. + * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame + * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. + * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for + * backward compatibility. + * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command + * is used to configure connection quality monitoring notification trigger + * levels. + * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This + * command is used as an event to indicate the that a trigger level was + * reached. + * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ + * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed + * by %NL80211_ATTR_IFINDEX) shall operate on. + * In case multiple channels are supported by the device, the mechanism + * with which it switches channels is implementation-defined. + * When a monitor interface is given, it can only switch channel while + * no other interfaces are operating to avoid disturbing the operation + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * + * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial + * mesh config parameters may be given. + * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On + * reception of this notification, userspace may decide to create a new + * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * + * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. + * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. + * Since wireless is more complex than wired ethernet, it supports + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see + * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * + * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver + * the necessary information for supporting GTK rekey offload. This + * feature is typically used during WoWLAN. The configuration data + * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and + * contains the data in sub-attributes). After rekeying happened, + * this command may also be sent by the driver as an MLME event to + * inform userspace of the new replay counter. + * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. + * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * + * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether + * No Acknowledgement Policy should be applied. + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything between, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + NL80211_CMD_GET_KEY, + NL80211_CMD_SET_KEY, + NL80211_CMD_NEW_KEY, + NL80211_CMD_DEL_KEY, + + NL80211_CMD_GET_BEACON, + NL80211_CMD_SET_BEACON, + NL80211_CMD_NEW_BEACON, + NL80211_CMD_DEL_BEACON, + + NL80211_CMD_GET_STATION, + NL80211_CMD_SET_STATION, + NL80211_CMD_NEW_STATION, + NL80211_CMD_DEL_STATION, + + NL80211_CMD_GET_MPATH, + NL80211_CMD_SET_MPATH, + NL80211_CMD_NEW_MPATH, + NL80211_CMD_DEL_MPATH, + + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, + + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, + + NL80211_CMD_GET_REG, + + NL80211_CMD_GET_SCAN, + NL80211_CMD_TRIGGER_SCAN, + NL80211_CMD_NEW_SCAN_RESULTS, + NL80211_CMD_SCAN_ABORTED, + + NL80211_CMD_REG_CHANGE, + + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + + NL80211_CMD_MICHAEL_MIC_FAILURE, + + NL80211_CMD_REG_BEACON_HINT, + + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + + NL80211_CMD_REMAIN_ON_CHANNEL, + NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, + + NL80211_CMD_SET_TX_BITRATE_MASK, + + NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_FRAME, + NL80211_CMD_ACTION = NL80211_CMD_FRAME, + NL80211_CMD_FRAME_TX_STATUS, + NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, + + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + + NL80211_CMD_SET_CQM, + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, + NL80211_CMD_SET_WDS_PEER, + + NL80211_CMD_FRAME_WAIT_CANCEL, + + NL80211_CMD_JOIN_MESH, + NL80211_CMD_LEAVE_MESH, + + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + + NL80211_CMD_NEW_PEER_CANDIDATE, + + NL80211_CMD_GET_WOWLAN, + NL80211_CMD_SET_WOWLAN, + + NL80211_CMD_START_SCHED_SCAN, + NL80211_CMD_STOP_SCHED_SCAN, + NL80211_CMD_SCHED_SCAN_RESULTS, + NL80211_CMD_SCHED_SCAN_STOPPED, + + NL80211_CMD_SET_REKEY_OFFLOAD, + + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + + NL80211_CMD_UNEXPECTED_FRAME, + + NL80211_CMD_PROBE_CLIENT, + + NL80211_CMD_REGISTER_BEACONS, + + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + + NL80211_CMD_SET_NOACK_MAP, + + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE +#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT + +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211//index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ + * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including + * this attribute) + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 + * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 + * section 7.3.2.9; dot11CoverageClass; u8 + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_MAC: MAC address (various uses) + * + * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * + * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU + * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing + * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE + * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE + * + * @NL80211_ATTR_STA_AID: Association ID for the station (u16) + * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) + * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by + * IEEE 802.11 7.3.1.6 (u16). + * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported + * rates as defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station + * to, or the AP interface the station was originally added to to. + * @NL80211_ATTR_STA_INFO: information about a station, part of station info + * given for %NL80211_CMD_GET_STATION, nested attribute containing + * info as possible, see &enum nl80211_sta_info. + * + * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, + * consisting of a nested array. + * + * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. + * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * &enum nl80211_mpath_info. + * + * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_mntr_flags. + * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * + * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with + * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can + * scan with a single scheduled scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request + * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information + * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive + * scanning and include a zero-length SSID (wildcard) for wildcard scan + * @NL80211_ATTR_BSS: scan result BSS + * + * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used + * with %NL80211_CMD_ASSOCIATE request + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE + * commands to specify using a reassociate frame + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * + * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. + * + * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. + * + * @NL80211_ATTR_TX_RATES: Nested set of attributes + * (enum nl80211_tx_rate_attributes) describing TX rates per band. The + * enum nl80211_band value is used as the index (nla_type() of the nested + * data. If a band is not included, it will be configured to allow all + * rates based on negotiated supported rates information. This attribute + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. + * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the + * @NL80211_CMD_REGISTER_FRAME command. + * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be transmitted with + * %NL80211_CMD_FRAME. + * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be registered for RX. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * + * @NL80211_ATTR_CQM: connection quality monitor configuration in a + * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. + * + * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command + * is requesting a local authentication/association state change without + * invoking actual management frame exchange. This can be used with + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, + * NL80211_CMD_DISASSOCIATE. + * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * + * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See + * &enum nl80211_tx_power_setting for possible values. + * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * + * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly + * means support for per-station GTKs. + * + * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. + * This can be used to mask out antennas which are not attached or should + * not be used for transmitting. If an antenna is not selected in this + * bitmap the hardware is not allowed to transmit on this antenna. + * + * Each bit represents one antenna, starting with antenna 1 at the first + * bit. Depending on which antennas are selected in the bitmap, 802.11n + * drivers can derive which chainmasks to use (if all antennas belonging to + * a particular chain are disabled this chain should be disabled) and if + * a chain has diversity antennas wether diversity should be used or not. + * HT capabilities (STBC, TX Beamforming, Antenna selection) can be + * derived from the available chains after applying the antenna mask. + * Non-802.11n drivers can derive wether to use diversity or not. + * Drivers may reject configurations or RX/TX mask combinations they cannot + * support by returning -EINVAL. + * + * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. + * This can be used to mask out antennas which are not attached or should + * not be used for receiving. If an antenna is not selected in this bitmap + * the hardware should not be configured to receive on this antenna. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available + * for configuration as TX antennas via the above parameters. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available + * for configuration as RX antennas via the above parameters. + * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * + * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be + * transmitted on another channel when the channel given doesn't match + * the current channel. If the current channel doesn't match and this + * flag isn't set, the frame will be rejected. This is also used as an + * nl80211 capability flag. + * + * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute + * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as + * defined in &enum nl80211_plink_state. Used when userspace is + * driving the peer link management state machine. + * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * + * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy + * capabilities, the supported WoWLAN triggers + * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to + * indicate which WoW triggers should be enabled. This is also + * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN + * triggers. + + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. + + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If ommited, no filtering is done. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes + * defined in &enum nl80211_if_combination_attrs. + * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like + * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that + * are managed in software: interfaces of these types aren't subject to + * any restrictions in their number or combinations. + * + * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. + * + * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, + * nested array attribute containing an entry for each band, with the entry + * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but + * without the length restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). + * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the + * ATTR_HT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * The values that may be configured are: + * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 + * AMPDU density and AMPDU factor. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs ht_caps file. + * + * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country + * abides to when initiating radiation on DFS channels. A country maps + * to one DFS region. + * + * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of + * up to 16 TIDs. + * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything between, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + NL80211_ATTR_MAC, + + NL80211_ATTR_KEY_DATA, + NL80211_ATTR_KEY_IDX, + NL80211_ATTR_KEY_CIPHER, + NL80211_ATTR_KEY_SEQ, + NL80211_ATTR_KEY_DEFAULT, + + NL80211_ATTR_BEACON_INTERVAL, + NL80211_ATTR_DTIM_PERIOD, + NL80211_ATTR_BEACON_HEAD, + NL80211_ATTR_BEACON_TAIL, + + NL80211_ATTR_STA_AID, + NL80211_ATTR_STA_FLAGS, + NL80211_ATTR_STA_LISTEN_INTERVAL, + NL80211_ATTR_STA_SUPPORTED_RATES, + NL80211_ATTR_STA_VLAN, + NL80211_ATTR_STA_INFO, + + NL80211_ATTR_WIPHY_BANDS, + + NL80211_ATTR_MNTR_FLAGS, + + NL80211_ATTR_MESH_ID, + NL80211_ATTR_STA_PLINK_ACTION, + NL80211_ATTR_MPATH_NEXT_HOP, + NL80211_ATTR_MPATH_INFO, + + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + + NL80211_ATTR_MESH_CONFIG, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + NL80211_ATTR_WIPHY_FREQ, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, + + NL80211_ATTR_KEY_DEFAULT_MGMT, + + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + + NL80211_ATTR_MAX_NUM_SCAN_SSIDS, + + NL80211_ATTR_SCAN_FREQUENCIES, + NL80211_ATTR_SCAN_SSIDS, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ + NL80211_ATTR_BSS, + + NL80211_ATTR_REG_INITIATOR, + NL80211_ATTR_REG_TYPE, + + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + + NL80211_ATTR_KEY_TYPE, + + NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, + + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + + NL80211_ATTR_DURATION, + + NL80211_ATTR_COOKIE, + + NL80211_ATTR_WIPHY_COVERAGE_CLASS, + + NL80211_ATTR_TX_RATES, + + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + + NL80211_ATTR_PS_STATE, + + NL80211_ATTR_CQM, + + NL80211_ATTR_LOCAL_STATE_CHANGE, + + NL80211_ATTR_AP_ISOLATE, + + NL80211_ATTR_WIPHY_TX_POWER_SETTING, + NL80211_ATTR_WIPHY_TX_POWER_LEVEL, + + NL80211_ATTR_TX_FRAME_TYPES, + NL80211_ATTR_RX_FRAME_TYPES, + NL80211_ATTR_FRAME_TYPE, + + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + + NL80211_ATTR_SUPPORT_IBSS_RSN, + + NL80211_ATTR_WIPHY_ANTENNA_TX, + NL80211_ATTR_WIPHY_ANTENNA_RX, + + NL80211_ATTR_MCAST_RATE, + + NL80211_ATTR_OFFCHANNEL_TX_OK, + + NL80211_ATTR_BSS_HT_OPMODE, + + NL80211_ATTR_KEY_DEFAULT_TYPES, + + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + + NL80211_ATTR_MESH_SETUP, + + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + + NL80211_ATTR_SUPPORT_MESH_AUTH, + NL80211_ATTR_STA_PLINK_STATE, + + NL80211_ATTR_WOWLAN_TRIGGERS, + NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, + + NL80211_ATTR_SCHED_SCAN_INTERVAL, + + NL80211_ATTR_INTERFACE_COMBINATIONS, + NL80211_ATTR_SOFTWARE_IFTYPES, + + NL80211_ATTR_REKEY_DATA, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, + NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, + + NL80211_ATTR_SCAN_SUPP_RATES, + + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + + NL80211_ATTR_DEVICE_AP_SME, + + NL80211_ATTR_DONT_WAIT_FOR_ACK, + + NL80211_ATTR_FEATURE_FLAGS, + + NL80211_ATTR_PROBE_RESP_OFFLOAD, + + NL80211_ATTR_PROBE_RESP, + + NL80211_ATTR_DFS_REGION, + + NL80211_ATTR_DISABLE_HT, + NL80211_ATTR_HT_CAPABILITY_MASK, + + NL80211_ATTR_NOACK_MAP, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG + +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS +#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE +#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR +#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_HT_RATES 77 +#define NL80211_MAX_SUPP_REG_RULES 32 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 + +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces + * are a bit special in that they must always be tied to a pre-existing + * AP type interface. + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, + + /* keep last */ + NUM_NL80211_IFTYPES, + NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 +}; + +/** + * enum nl80211_sta_flags - station flags + * + * Station flags. When a station is added to an AP interface, it is + * assumed to be already associated (and hence authenticated.) + * + * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved + * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) + * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames + * with short barker preamble + * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should + * only be used in managed mode (even in the flags mask). Note that the + * flag can't be changed, it is only valid while adding a station, and + * attempts to change it will silently be ignored (rather than rejected + * as errors.) + * @NL80211_STA_FLAG_MAX: highest station flag number currently defined + * @__NL80211_STA_FLAG_AFTER_LAST: internal use + */ +enum nl80211_sta_flags { + __NL80211_STA_FLAG_INVALID, + NL80211_STA_FLAG_AUTHORIZED, + NL80211_STA_FLAG_SHORT_PREAMBLE, + NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, + + /* keep last */ + __NL80211_STA_FLAG_AFTER_LAST, + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 +}; + +/** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** + * enum nl80211_rate_info - bitrate information + * + * These attribute types are used with %NL80211_STA_INFO_TXRATE + * when getting information about the bitrate of a station. + * + * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved + * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) + * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ +enum nl80211_rate_info { + __NL80211_RATE_INFO_INVALID, + NL80211_RATE_INFO_BITRATE, + NL80211_RATE_INFO_MCS, + NL80211_RATE_INFO_40_MHZ_WIDTH, + NL80211_RATE_INFO_SHORT_GI, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, + NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_bss_param - BSS information collected by STA + * + * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM + * when getting information about the bitrate of a station. + * + * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved + * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) + * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) + * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) + * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined + * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use + */ +enum nl80211_sta_bss_param { + __NL80211_STA_BSS_PARAM_INVALID, + NL80211_STA_BSS_PARAM_CTS_PROT, + NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, + NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, + NL80211_STA_BSS_PARAM_DTIM_PERIOD, + NL80211_STA_BSS_PARAM_BEACON_INTERVAL, + + /* keep last */ + __NL80211_STA_BSS_PARAM_AFTER_LAST, + NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_info - station information + * + * These attribute types are used with %NL80211_ATTR_STA_INFO + * when getting information about a station. + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute + * containing info as possible, see &enum nl80211_rate_info + * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this + * station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) + * @NL80211_STA_INFO_LLID: the station's mesh LLID + * @NL80211_STA_INFO_PLID: the station's mesh PLID + * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) + * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested + * attribute, like NL80211_STA_INFO_TX_BITRATE. + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. + * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, + NL80211_STA_INFO_INACTIVE_TIME, + NL80211_STA_INFO_RX_BYTES, + NL80211_STA_INFO_TX_BYTES, + NL80211_STA_INFO_LLID, + NL80211_STA_INFO_PLID, + NL80211_STA_INFO_PLINK_STATE, + NL80211_STA_INFO_SIGNAL, + NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, + NL80211_STA_INFO_TX_RETRIES, + NL80211_STA_INFO_TX_FAILED, + NL80211_STA_INFO_SIGNAL_AVG, + NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, + NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, + NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active + * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN + * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set + * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded + */ +enum nl80211_mpath_flags { + NL80211_MPATH_FLAG_ACTIVE = 1<<0, + NL80211_MPATH_FLAG_RESOLVING = 1<<1, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, + NL80211_MPATH_FLAG_FIXED = 1<<3, + NL80211_MPATH_FLAG_RESOLVED = 1<<4, +}; + +/** + * enum nl80211_mpath_info - mesh path information + * + * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting + * information about a mesh path. + * + * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved + * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination + * @NL80211_MPATH_INFO_SN: destination sequence number + * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path + * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now + * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in + * &enum nl80211_mpath_flags; + * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number + * currently defind + * @__NL80211_MPATH_INFO_AFTER_LAST: internal use + */ +enum nl80211_mpath_info { + __NL80211_MPATH_INFO_INVALID, + NL80211_MPATH_INFO_FRAME_QLEN, + NL80211_MPATH_INFO_SN, + NL80211_MPATH_INFO_METRIC, + NL80211_MPATH_INFO_EXPTIME, + NL80211_MPATH_INFO_FLAGS, + NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, + NL80211_MPATH_INFO_DISCOVERY_RETRIES, + + /* keep last */ + __NL80211_MPATH_INFO_AFTER_LAST, + NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, + * an array of nested frequency attributes + * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, + * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_attr { + __NL80211_BAND_ATTR_INVALID, + NL80211_BAND_ATTR_FREQS, + NL80211_BAND_ATTR_RATES, + + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + +/** + * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz + * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current + * regulatory domain. + * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is + * permitted on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + */ +enum nl80211_frequency_attr { + __NL80211_FREQUENCY_ATTR_INVALID, + NL80211_FREQUENCY_ATTR_FREQ, + NL80211_FREQUENCY_ATTR_DISABLED, + NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, + NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, + NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER + +/** + * enum nl80211_bitrate_attr - bitrate attributes + * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps + * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported + * in 2.4 GHz band. + * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number + * currently defined + * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_bitrate_attr { + __NL80211_BITRATE_ATTR_INVALID, + NL80211_BITRATE_ATTR_RATE, + NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, + + /* keep last */ + __NL80211_BITRATE_ATTR_AFTER_LAST, + NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_initiator - Indicates the initiator of a reg domain request + * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world + * regulatory domain. + * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the + * wireless core it thinks its knows the regulatory domain we should be in. + * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country + * code from the IE, and relies on the regulatory domain information + * structure passed by userspace (CRDA) from our wireless-regdb. + * If a channel is enabled but the country code indicates it should + * be disabled we disable the channel and re-enable it upon disassociation. + */ +enum nl80211_reg_initiator { + NL80211_REGDOM_SET_BY_CORE, + NL80211_REGDOM_SET_BY_USER, + NL80211_REGDOM_SET_BY_DRIVER, + NL80211_REGDOM_SET_BY_COUNTRY_IE, +}; + +/** + * enum nl80211_reg_type - specifies the type of regulatory domain + * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains + * to a specific country. When this is set you can count on the + * ISO / IEC 3166 alpha2 country code being valid. + * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory + * domain. + * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. + * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product + * of an intersection between two regulatory domains -- the previously + * set regulatory domain on the system and the last accepted regulatory + * domain request to be processed. + */ +enum nl80211_reg_type { + NL80211_REGDOM_TYPE_COUNTRY, + NL80211_REGDOM_TYPE_WORLD, + NL80211_REGDOM_TYPE_CUSTOM_WORLD, + NL80211_REGDOM_TYPE_INTERSECTION, +}; + +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + +/** + * enum nl80211_dfs_regions - regulatory DFS regions + * + * @NL80211_DFS_UNSET: Country has no DFS master region specified + * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC + * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI + * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec + */ +enum nl80211_dfs_regions { + NL80211_DFS_UNSET = 0, + NL80211_DFS_FCC = 1, + NL80211_DFS_ETSI = 2, + NL80211_DFS_JP = 3, +}; + +/** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used + * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio + * spent on this channel + * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) + * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy + * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent + * receiving data + * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent + * transmitting data + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, + NL80211_SURVEY_INFO_CHANNEL_TIME, + NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_RX, + NL80211_SURVEY_INFO_CHANNEL_TIME_TX, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mntr_flags - monitor configuration flags + * + * Monitor configuration flags. + * + * @__NL80211_MNTR_FLAG_INVALID: reserved + * + * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS + * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @NL80211_MNTR_FLAG_CONTROL: pass control frames + * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering + * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. + * overrides all other flags. + * + * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use + * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag + */ +enum nl80211_mntr_flags { + __NL80211_MNTR_FLAG_INVALID, + NL80211_MNTR_FLAG_FCSFAIL, + NL80211_MNTR_FLAG_PLCPFAIL, + NL80211_MNTR_FLAG_CONTROL, + NL80211_MNTR_FLAG_OTHER_BSS, + NL80211_MNTR_FLAG_COOK_FRAMES, + + /* keep last */ + __NL80211_MNTR_FLAG_AFTER_LAST, + NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters. These can be changed while the mesh is + * active. + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically + * open peer links when we detect compatible mesh peers. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the mesh + * + * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not + * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * + * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. + * + * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding + * or forwarding entity (default is TRUE - forwarding entity) + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, + NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + NL80211_MESHCONF_FORWARDING, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the default + * HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element that + * vendors will use to identify the path selection methods and metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. + * + * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication + * daemon will be securing peer link frames. AMPE is a secured version of Mesh + * Peering Management (MPM) and is implemented with the assistance of a + * userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and key + * management). When the flag is unset (default), the kernel can autonomously + * complete (unsecured) mesh peering without the need of a userspace daemon. + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, + NL80211_MESH_SETUP_USERSPACE_AMPE, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_txq_q { + NL80211_TXQ_Q_VO, + NL80211_TXQ_Q_VI, + NL80211_TXQ_Q_BE, + NL80211_TXQ_Q_BK +}; + +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS +}; + +/** + * enum nl80211_bss - netlink attributes for a BSS + * + * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) + * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) + * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) + * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) + * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the + * raw information elements from the probe response/beacon (bin); + * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are + * from a Probe Response frame; otherwise they are from a Beacon frame. + * However, if the driver does not indicate the source of the IEs, these + * IEs may be from either frame subtype. + * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon + * in mBm (100 * dBm) (s32) + * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon + * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms + * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information + * elements from a Beacon frame (bin); not present if no Beacon frame has + * yet been received + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +enum nl80211_bss { + __NL80211_BSS_INVALID, + NL80211_BSS_BSSID, + NL80211_BSS_FREQUENCY, + NL80211_BSS_TSF, + NL80211_BSS_BEACON_INTERVAL, + NL80211_BSS_CAPABILITY, + NL80211_BSS_INFORMATION_ELEMENTS, + NL80211_BSS_SIGNAL_MBM, + NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, + NL80211_BSS_BEACON_IES, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, + NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * + * The BSS status is a BSS attribute in scan dumps, which + * indicates the status the interface has wrt. this BSS. + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC +}; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NUM_NL80211_KEYTYPES: number of defined key types + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, + + NUM_NL80211_KEYTYPES +}; + +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, +}; + +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, +}; + +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not + * specified the default depends on whether a MAC address was + * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + +/** + * enum nl80211_tx_rate_attributes - TX rate set attributes + * @__NL80211_TXRATE_INVALID: invalid + * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection + * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with + * 1 = 500 kbps) but without the IE length restriction (at most + * %NL80211_MAX_SUPP_RATES in a single array). + * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection + * in an array of MCS numbers. + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +enum nl80211_tx_rate_attributes { + __NL80211_TXRATE_INVALID, + NL80211_TXRATE_LEGACY, + NL80211_TXRATE_MCS, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, + NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + */ +enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, +}; + +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + +/** + * enum nl80211_attr_cqm - connection quality monitor attributes + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero + * to disable. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). + * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many + * consecutive packets were not acknowledged by the peer + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +enum nl80211_attr_cqm { + __NL80211_ATTR_CQM_INVALID, + NL80211_ATTR_CQM_RSSI_THOLD, + NL80211_ATTR_CQM_RSSI_HYST, + NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + NL80211_ATTR_CQM_PKT_LOSS_EVENT, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, + NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the + * configured threshold + */ +enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, +}; + + +/** + * enum nl80211_tx_power_setting - TX power adjustment + * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power + * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter + * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter + */ +enum nl80211_tx_power_setting { + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_LIMITED, + NL80211_TX_POWER_FIXED, +}; + +/** + * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute + * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * a zero bit are ignored + * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * a bit for each byte in the pattern. The lowest-order bit corresponds + * to the first byte of the pattern, but the bytes of the pattern are + * in a little-endian-like format, i.e. the 9th byte of the pattern + * corresponds to the lowest-order bit in the second byte of the mask. + * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where + * xx indicates "don't care") would be represented by a pattern of + * twelve zero bytes, and a mask of "0xed,0x07". + * Note that the pattern matching is done as though frames were not + * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked + * first (including SNAP header unpacking) and then matched. + * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes + * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + */ +enum nl80211_wowlan_packet_pattern_attr { + __NL80211_WOWLAN_PKTPAT_INVALID, + NL80211_WOWLAN_PKTPAT_MASK, + NL80211_WOWLAN_PKTPAT_PATTERN, + + NUM_NL80211_WOWLAN_PKTPAT, + MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, +}; + +/** + * struct nl80211_wowlan_pattern_support - pattern support information + * @max_patterns: maximum number of patterns supported + * @min_pattern_len: minimum length of each pattern + * @max_pattern_len: maximum length of each pattern + * + * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the + * capability information given by the kernel to userspace. + */ +struct nl80211_wowlan_pattern_support { + __u32 max_patterns; + __u32 min_pattern_len; + __u32 max_pattern_len; +} __attribute__((packed)); + +/** + * enum nl80211_wowlan_triggers - WoWLAN trigger definitions + * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed + * by 16 repetitions of MAC addr, anywhere in payload) (flag) + * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns + * which are passed in an array of nested attributes, each nested attribute + * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. + * Each pattern defines a wakeup packet. The matching is done on the MSDU, + * i.e. as though the packet was an 802.3 packet, so the pattern matching + * is done after the packet is converted to the MSDU. + * + * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute + * carrying a &struct nl80211_wowlan_pattern_support. + * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be + * used when setting, used only to indicate that GTK rekeying is supported + * by the device (flag) + * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if + * done by the device) (flag) + * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request + * packet (flag) + * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) + * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released + * (on devices that have rfkill in the device) (flag) + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + */ +enum nl80211_wowlan_triggers { + __NL80211_WOWLAN_TRIG_INVALID, + NL80211_WOWLAN_TRIG_ANY, + NL80211_WOWLAN_TRIG_DISCONNECT, + NL80211_WOWLAN_TRIG_MAGIC_PKT, + NL80211_WOWLAN_TRIG_PKT_PATTERN, + NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, + NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, + NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, + NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, + NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + + /* keep last */ + NUM_NL80211_WOWLAN_TRIG, + MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 +}; + +/** + * enum nl80211_iface_limit_attrs - limit attributes + * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) + * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that + * can be chosen from this set of interface types (u32) + * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a + * flag attribute for each interface type in this set + * @NUM_NL80211_IFACE_LIMIT: number of attributes + * @MAX_NL80211_IFACE_LIMIT: highest attribute number + */ +enum nl80211_iface_limit_attrs { + NL80211_IFACE_LIMIT_UNSPEC, + NL80211_IFACE_LIMIT_MAX, + NL80211_IFACE_LIMIT_TYPES, + + /* keep last */ + NUM_NL80211_IFACE_LIMIT, + MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 +}; + +/** + * enum nl80211_if_combination_attrs -- interface combination attributes + * + * @NL80211_IFACE_COMB_UNSPEC: (reserved) + * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits + * for given interface types, see &enum nl80211_iface_limit_attrs. + * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of + * interfaces that can be created in this group. This number doesn't + * apply to interfaces purely managed in software, which are listed + * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. + * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that + * beacon intervals within this group must be all the same even for + * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt + * the infrastructure network's beacon interval. + * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many + * different channels may be used within this group. + * @NUM_NL80211_IFACE_COMB: number of attributes + * @MAX_NL80211_IFACE_COMB: highest attribute number + * + * Examples: + * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 + * => allows an AP and a STA that must match BIs + * + * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 + * => allows 8 of AP/GO + * + * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 + * => allows two STAs on different channels + * + * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 + * => allows a STA plus three P2P interfaces + * + * The list of these four possiblities could completely be contained + * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate + * that any of these groups must match. + * + * "Combinations" of just a single interface will not be listed here, + * a single interface of any valid interface type is assumed to always + * be possible by itself. This means that implicitly, for each valid + * interface type, the following group always exists: + * numbers = [ #{} <= 1 ], channels = 1, max = 1 + */ +enum nl80211_if_combination_attrs { + NL80211_IFACE_COMB_UNSPEC, + NL80211_IFACE_COMB_LIMITS, + NL80211_IFACE_COMB_MAXNUM, + NL80211_IFACE_COMB_STA_AP_BI_MATCH, + NL80211_IFACE_COMB_NUM_CHANNELS, + + /* keep last */ + NUM_NL80211_IFACE_COMB, + MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 +}; + + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existant mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + +#define NL80211_KCK_LEN 16 +#define NL80211_KEK_LEN 16 +#define NL80211_REPLAY_CTR_LEN 8 + +/** + * enum nl80211_rekey_data - attributes for GTK rekey offload + * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes + * @NL80211_REKEY_DATA_KEK: key encryption key (binary) + * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) + * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) + * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) + */ +enum nl80211_rekey_data { + __NL80211_REKEY_DATA_INVALID, + NL80211_REKEY_DATA_KEK, + NL80211_REKEY_DATA_KCK, + NL80211_REKEY_DATA_REPLAY_CTR, + + /* keep last */ + NUM_NL80211_REKEY_DATA, + MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 +}; + +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + +/* + * enum nl80211_ap_sme_features - device-integrated AP features + * Reserved for future use, no bits are defined in + * NL80211_ATTR_DEVICE_AP_SME yet. +enum nl80211_ap_sme_features { +}; + */ + +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, +}; + +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + +#endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iwinfo/src/api/wext.h b/package/network/utils/iwinfo/src/api/wext.h new file mode 100644 index 0000000000..6b5838e1b8 --- /dev/null +++ b/package/network/utils/iwinfo/src/api/wext.h @@ -0,0 +1,1139 @@ +/* + * This file define a set of standard wireless extensions + * + * Version : 22 16.3.07 + * + * Authors : Jean Tourrilhes - HPL - + * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. + */ + +#ifndef _LINUX_WIRELESS_H +#define _LINUX_WIRELESS_H + +/************************** DOCUMENTATION **************************/ +/* + * Initial APIs (1996 -> onward) : + * ----------------------------- + * Basically, the wireless extensions are for now a set of standard ioctl + * call + /proc/net/wireless + * + * The entry /proc/net/wireless give statistics and information on the + * driver. + * This is better than having each driver having its entry because + * its centralised and we may remove the driver module safely. + * + * Ioctl are used to configure the driver and issue commands. This is + * better than command line options of insmod because we may want to + * change dynamically (while the driver is running) some parameters. + * + * The ioctl mechanimsm are copied from standard devices ioctl. + * We have the list of command plus a structure descibing the + * data exchanged... + * Note that to add these ioctl, I was obliged to modify : + * # net/core/dev.c (two place + add include) + * # net/ipv4/af_inet.c (one place + add include) + * + * /proc/net/wireless is a copy of /proc/net/dev. + * We have a structure for data passed from the driver to /proc/net/wireless + * Too add this, I've modified : + * # net/core/dev.c (two other places) + * # include/linux/netdevice.h (one place) + * # include/linux/proc_fs.h (one place) + * + * New driver API (2002 -> onward) : + * ------------------------------- + * This file is only concerned with the user space API and common definitions. + * The new driver API is defined and documented in : + * # include/net/iw_handler.h + * + * Note as well that /proc/net/wireless implementation has now moved in : + * # net/core/wireless.c + * + * Wireless Events (2002 -> onward) : + * -------------------------------- + * Events are defined at the end of this file, and implemented in : + * # net/core/wireless.c + * + * Other comments : + * -------------- + * Do not add here things that are redundant with other mechanisms + * (drivers init, ifconfig, /proc/net/dev, ...) and with are not + * wireless specific. + * + * These wireless extensions are not magic : each driver has to provide + * support for them... + * + * IMPORTANT NOTE : As everything in the kernel, this is very much a + * work in progress. Contact me if you have ideas of improvements... + */ + +/***************************** INCLUDES *****************************/ + +/* This header is used in user-space, therefore need to be sanitised + * for that purpose. Those includes are usually not compatible with glibc. + * To know which includes to use in user-space, check iwlib.h. */ +#ifdef __KERNEL__ +#include /* for "caddr_t" et al */ +#include /* for "struct sockaddr" et al */ +#include /* for IFNAMSIZ and co... */ +#endif /* __KERNEL__ */ + +/***************************** VERSION *****************************/ +/* + * This constant is used to know the availability of the wireless + * extensions and to know which version of wireless extensions it is + * (there is some stuff that will be added in the future...) + * I just plan to increment with each new version. + */ +#define WIRELESS_EXT 22 + +/* + * Changes : + * + * V2 to V3 + * -------- + * Alan Cox start some incompatibles changes. I've integrated a bit more. + * - Encryption renamed to Encode to avoid US regulation problems + * - Frequency changed from float to struct to avoid problems on old 386 + * + * V3 to V4 + * -------- + * - Add sensitivity + * + * V4 to V5 + * -------- + * - Missing encoding definitions in range + * - Access points stuff + * + * V5 to V6 + * -------- + * - 802.11 support (ESSID ioctls) + * + * V6 to V7 + * -------- + * - define IW_ESSID_MAX_SIZE and IW_MAX_AP + * + * V7 to V8 + * -------- + * - Changed my e-mail address + * - More 802.11 support (nickname, rate, rts, frag) + * - List index in frequencies + * + * V8 to V9 + * -------- + * - Support for 'mode of operation' (ad-hoc, managed...) + * - Support for unicast and multicast power saving + * - Change encoding to support larger tokens (>64 bits) + * - Updated iw_params (disable, flags) and use it for NWID + * - Extracted iw_point from iwreq for clarity + * + * V9 to V10 + * --------- + * - Add PM capability to range structure + * - Add PM modifier : MAX/MIN/RELATIVE + * - Add encoding option : IW_ENCODE_NOKEY + * - Add TxPower ioctls (work like TxRate) + * + * V10 to V11 + * ---------- + * - Add WE version in range (help backward/forward compatibility) + * - Add retry ioctls (work like PM) + * + * V11 to V12 + * ---------- + * - Add SIOCSIWSTATS to get /proc/net/wireless programatically + * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space + * - Add new statistics (frag, retry, beacon) + * - Add average quality (for user space calibration) + * + * V12 to V13 + * ---------- + * - Document creation of new driver API. + * - Extract union iwreq_data from struct iwreq (for new driver API). + * - Rename SIOCSIWNAME as SIOCSIWCOMMIT + * + * V13 to V14 + * ---------- + * - Wireless Events support : define struct iw_event + * - Define additional specific event numbers + * - Add "addr" and "param" fields in union iwreq_data + * - AP scanning stuff (SIOCSIWSCAN and friends) + * + * V14 to V15 + * ---------- + * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg + * - Make struct iw_freq signed (both m & e), add explicit padding + * - Add IWEVCUSTOM for driver specific event/scanning token + * - Add IW_MAX_GET_SPY for driver returning a lot of addresses + * - Add IW_TXPOW_RANGE for range of Tx Powers + * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points + * - Add IW_MODE_MONITOR for passive monitor + * + * V15 to V16 + * ---------- + * - Increase the number of bitrates in iw_range to 32 (for 802.11g) + * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) + * - Reshuffle struct iw_range for increases, add filler + * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses + * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support + * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" + * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index + * + * V16 to V17 + * ---------- + * - Add flags to frequency -> auto/fixed + * - Document (struct iw_quality *)->updated, add new flags (INVALID) + * - Wireless Event capability in struct iw_range + * - Add support for relative TxPower (yick !) + * + * V17 to V18 (From Jouni Malinen ) + * ---------- + * - Add support for WPA/WPA2 + * - Add extended encoding configuration (SIOCSIWENCODEEXT and + * SIOCGIWENCODEEXT) + * - Add SIOCSIWGENIE/SIOCGIWGENIE + * - Add SIOCSIWMLME + * - Add SIOCSIWPMKSA + * - Add struct iw_range bit field for supported encoding capabilities + * - Add optional scan request parameters for SIOCSIWSCAN + * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA + * related parameters (extensible up to 4096 parameter values) + * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, + * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND + * + * V18 to V19 + * ---------- + * - Remove (struct iw_point *)->pointer from events and streams + * - Remove header includes to help user space + * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 + * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros + * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM + * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros + * + * V19 to V20 + * ---------- + * - RtNetlink requests support (SET/GET) + * + * V20 to V21 + * ---------- + * - Remove (struct net_device *)->get_wireless_stats() + * - Change length in ESSID and NICK to strlen() instead of strlen()+1 + * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers + * - Power/Retry relative values no longer * 100000 + * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI + * + * V21 to V22 + * ---------- + * - Prevent leaking of kernel space in stream on 64 bits. + */ + +/**************************** CONSTANTS ****************************/ + +/* -------------------------- IOCTL LIST -------------------------- */ + +/* Wireless Identification */ +#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ +#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ +/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. + * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... + * Don't put the name of your driver there, it's useless. */ + +/* Basic operations */ +#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ +#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ +#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ +#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ +#define SIOCSIWMODE 0x8B06 /* set operation mode */ +#define SIOCGIWMODE 0x8B07 /* get operation mode */ +#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ +#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ + +/* Informative stuff */ +#define SIOCSIWRANGE 0x8B0A /* Unused */ +#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ +#define SIOCSIWPRIV 0x8B0C /* Unused */ +#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ +#define SIOCSIWSTATS 0x8B0E /* Unused */ +#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ +/* SIOCGIWSTATS is strictly used between user space and the kernel, and + * is never passed to the driver (i.e. the driver will never see it). */ + +/* Spy support (statistics per MAC address - used for Mobile IP support) */ +#define SIOCSIWSPY 0x8B10 /* set spy addresses */ +#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ +#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ +#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ + +/* Access Point manipulation */ +#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ +#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ +#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ +#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ +#define SIOCGIWSCAN 0x8B19 /* get scanning results */ + +/* 802.11 specific support */ +#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ +#define SIOCGIWESSID 0x8B1B /* get ESSID */ +#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ +#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ +/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit + * within the 'iwreq' structure, so we need to use the 'data' member to + * point to a string in user space, like it is done for RANGE... */ + +/* Other parameters useful in 802.11 and some other devices */ +#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ +#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ +#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ +#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ +#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ +#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ +#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ +#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ +#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ +#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ + +/* Encoding stuff (scrambling, hardware security, WEP...) */ +#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ +#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ +/* Power saving stuff (power management, unicast and multicast) */ +#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ +#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ +/* Modulation bitmask */ +#define SIOCSIWMODUL 0x8B2E /* set Modulations settings */ +#define SIOCGIWMODUL 0x8B2F /* get Modulations settings */ + +/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). + * This ioctl uses struct iw_point and data buffer that includes IE id and len + * fields. More than one IE may be included in the request. Setting the generic + * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers + * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers + * are required to report the used IE as a wireless event, e.g., when + * associating with an AP. */ +#define SIOCSIWGENIE 0x8B30 /* set generic IE */ +#define SIOCGIWGENIE 0x8B31 /* get generic IE */ + +/* WPA : IEEE 802.11 MLME requests */ +#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses + * struct iw_mlme */ +/* WPA : Authentication mode parameters */ +#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ +#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ + +/* WPA : Extended version of encoding configuration */ +#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ +#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ + +/* WPA2 : PMKSA cache management */ +#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ + +/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ + +/* These 32 ioctl are wireless device private, for 16 commands. + * Each driver is free to use them for whatever purpose it chooses, + * however the driver *must* export the description of those ioctls + * with SIOCGIWPRIV and *must* use arguments as defined below. + * If you don't follow those rules, DaveM is going to hate you (reason : + * it make mixed 32/64bit operation impossible). + */ +#define SIOCIWFIRSTPRIV 0x8BE0 +#define SIOCIWLASTPRIV 0x8BFF +/* Previously, we were using SIOCDEVPRIVATE, but we now have our + * separate range because of collisions with other tools such as + * 'mii-tool'. + * We now have 32 commands, so a bit more space ;-). + * Also, all 'even' commands are only usable by root and don't return the + * content of ifr/iwr to user (but you are not obliged to use the set/get + * convention, just use every other two command). More details in iwpriv.c. + * And I repeat : you are not forced to use them with iwpriv, but you + * must be compliant with it. + */ + +/* ------------------------- IOCTL STUFF ------------------------- */ + +/* The first and the last (range) */ +#define SIOCIWFIRST 0x8B00 +#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ +#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) + +/* Odd : get (world access), even : set (root access) */ +#define IW_IS_SET(cmd) (!((cmd) & 0x1)) +#define IW_IS_GET(cmd) ((cmd) & 0x1) + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* Those are *NOT* ioctls, do not issue request on them !!! */ +/* Most events use the same identifier as ioctl requests */ + +#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ +#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ +#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ +#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ +#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ +#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) + * (scan results); This includes id and + * length fields. One IWEVGENIE may + * contain more than one IE. Scan + * results may contain one or more + * IWEVGENIE events. */ +#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure + * (struct iw_michaelmicfailure) + */ +#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. + * The data includes id and length + * fields and may contain more than one + * IE. This event is required in + * Managed mode if the driver + * generates its own WPA/RSN IE. This + * should be sent just before + * IWEVREGISTERED event for the + * association. */ +#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association + * Response. The data includes id and + * length fields and may contain more + * than one IE. This may be sent + * between IWEVASSOCREQIE and + * IWEVREGISTERED events for the + * association. */ +#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN + * pre-authentication + * (struct iw_pmkid_cand) */ + +#define IWEVFIRST 0x8C00 +#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) + +/* ------------------------- PRIVATE INFO ------------------------- */ +/* + * The following is used with SIOCGIWPRIV. It allow a driver to define + * the interface (name, type of data) for its private ioctl. + * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV + */ + +#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ +#define IW_PRIV_TYPE_NONE 0x0000 +#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ +#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ +#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ +#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ +#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ + +#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ + +#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ + +/* + * Note : if the number of args is fixed and the size < 16 octets, + * instead of passing a pointer we will put args in the iwreq struct... + */ + +/* ----------------------- OTHER CONSTANTS ----------------------- */ + +/* Maximum frequencies in the range struct */ +#define IW_MAX_FREQUENCIES 32 +/* Note : if you have something like 80 frequencies, + * don't increase this constant and don't fill the frequency list. + * The user will be able to set by channel anyway... */ + +/* Maximum bit rates in the range struct */ +#define IW_MAX_BITRATES 32 + +/* Maximum tx powers in the range struct */ +#define IW_MAX_TXPOWER 8 +/* Note : if you more than 8 TXPowers, just set the max and min or + * a few of them in the struct iw_range. */ + +/* Maximum of address that you may set with SPY */ +#define IW_MAX_SPY 8 + +/* Maximum of address that you may get in the + list of access points in range */ +#define IW_MAX_AP 64 + +/* Maximum size of the ESSID and NICKN strings */ +#define IW_ESSID_MAX_SIZE 32 + +/* Modes of operation */ +#define IW_MODE_AUTO 0 /* Let the driver decides */ +#define IW_MODE_ADHOC 1 /* Single cell network */ +#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ +#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ +#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ +#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ +#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ + +/* Statistics flags (bitmask in updated) */ +#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ +#define IW_QUAL_LEVEL_UPDATED 0x02 +#define IW_QUAL_NOISE_UPDATED 0x04 +#define IW_QUAL_ALL_UPDATED 0x07 +#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ +#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ +#define IW_QUAL_ALL_INVALID 0x70 + +/* Frequency flags */ +#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ +#define IW_FREQ_FIXED 0x01 /* Force a specific value */ + +/* Maximum number of size of encoding token available + * they are listed in the range structure */ +#define IW_MAX_ENCODING_SIZES 8 + +/* Maximum size of the encoding token in bytes */ +#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ + +/* Flags for encoding (along with the token) */ +#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ +#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ +#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ +#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ +#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ +#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ +#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ +#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ +#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ + +/* Power management flags available (along with the value, if any) */ +#define IW_POWER_ON 0x0000 /* No details... */ +#define IW_POWER_TYPE 0xF000 /* Type of parameter */ +#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ +#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ +#define IW_POWER_SAVING 0x4000 /* Value is relative (how aggressive)*/ +#define IW_POWER_MODE 0x0F00 /* Power Management mode */ +#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ +#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ +#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ +#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ +#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ +#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ +#define IW_POWER_MIN 0x0001 /* Value is a minimum */ +#define IW_POWER_MAX 0x0002 /* Value is a maximum */ +#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ + +/* Transmit Power flags available */ +#define IW_TXPOW_TYPE 0x00FF /* Type of value */ +#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ +#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ +#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ +#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ + +/* Retry limits and lifetime flags available */ +#define IW_RETRY_ON 0x0000 /* No details... */ +#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ +#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ +#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ +#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ +#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ +#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ +#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ +#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ +#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ + +/* Scanning request flags */ +#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ +#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ +#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ +#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ +#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ +#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ +#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ +#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ +#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ +/* struct iw_scan_req scan_type */ +#define IW_SCAN_TYPE_ACTIVE 0 +#define IW_SCAN_TYPE_PASSIVE 1 +/* Maximum size of returned data */ +#define IW_SCAN_MAX_DATA 4096 /* In bytes */ + +/* Max number of char in custom event - use multiple of them if needed */ +#define IW_CUSTOM_MAX 256 /* In bytes */ + +/* Generic information element */ +#define IW_GENERIC_IE_MAX 1024 + +/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ +#define IW_MLME_DEAUTH 0 +#define IW_MLME_DISASSOC 1 +#define IW_MLME_AUTH 2 +#define IW_MLME_ASSOC 3 + +/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ +#define IW_AUTH_INDEX 0x0FFF +#define IW_AUTH_FLAGS 0xF000 +/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) + * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the + * parameter that is being set/get to; value will be read/written to + * struct iw_param value field) */ +#define IW_AUTH_WPA_VERSION 0 +#define IW_AUTH_CIPHER_PAIRWISE 1 +#define IW_AUTH_CIPHER_GROUP 2 +#define IW_AUTH_KEY_MGMT 3 +#define IW_AUTH_TKIP_COUNTERMEASURES 4 +#define IW_AUTH_DROP_UNENCRYPTED 5 +#define IW_AUTH_80211_AUTH_ALG 6 +#define IW_AUTH_WPA_ENABLED 7 +#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 +#define IW_AUTH_ROAMING_CONTROL 9 +#define IW_AUTH_PRIVACY_INVOKED 10 + +/* IW_AUTH_WPA_VERSION values (bit field) */ +#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 +#define IW_AUTH_WPA_VERSION_WPA 0x00000002 +#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 + +/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ +#define IW_AUTH_CIPHER_NONE 0x00000001 +#define IW_AUTH_CIPHER_WEP40 0x00000002 +#define IW_AUTH_CIPHER_TKIP 0x00000004 +#define IW_AUTH_CIPHER_CCMP 0x00000008 +#define IW_AUTH_CIPHER_WEP104 0x00000010 + +/* IW_AUTH_KEY_MGMT values (bit field) */ +#define IW_AUTH_KEY_MGMT_802_1X 1 +#define IW_AUTH_KEY_MGMT_PSK 2 + +/* IW_AUTH_80211_AUTH_ALG values (bit field) */ +#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 +#define IW_AUTH_ALG_SHARED_KEY 0x00000002 +#define IW_AUTH_ALG_LEAP 0x00000004 + +/* IW_AUTH_ROAMING_CONTROL values */ +#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ +#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming + * control */ + +/* SIOCSIWENCODEEXT definitions */ +#define IW_ENCODE_SEQ_MAX_SIZE 8 +/* struct iw_encode_ext ->alg */ +#define IW_ENCODE_ALG_NONE 0 +#define IW_ENCODE_ALG_WEP 1 +#define IW_ENCODE_ALG_TKIP 2 +#define IW_ENCODE_ALG_CCMP 3 +/* struct iw_encode_ext ->ext_flags */ +#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 +#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 +#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 +#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 + +/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ +#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ +#define IW_MICFAILURE_GROUP 0x00000004 +#define IW_MICFAILURE_PAIRWISE 0x00000008 +#define IW_MICFAILURE_STAKEY 0x00000010 +#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) + */ + +/* Bit field values for enc_capa in struct iw_range */ +#define IW_ENC_CAPA_WPA 0x00000001 +#define IW_ENC_CAPA_WPA2 0x00000002 +#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 +#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 + +/* Event capability macros - in (struct iw_range *)->event_capa + * Because we have more than 32 possible events, we use an array of + * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ +#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ + (cmd - SIOCIWFIRSTPRIV + 0x60) : \ + (cmd - SIOCSIWCOMMIT)) +#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) +#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) +/* Event capability constants - event autogenerated by the kernel + * This list is valid for most 802.11 devices, customise as needed... */ +#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ + IW_EVENT_CAPA_MASK(0x8B06) | \ + IW_EVENT_CAPA_MASK(0x8B1A)) +#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) +/* "Easy" macro to set events in iw_range (less efficient) */ +#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) +#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } + +/* Modulations bitmasks */ +#define IW_MODUL_ALL 0x00000000 /* Everything supported */ +#define IW_MODUL_FH 0x00000001 /* Frequency Hopping */ +#define IW_MODUL_DS 0x00000002 /* Original Direct Sequence */ +#define IW_MODUL_CCK 0x00000004 /* 802.11b : 5.5 + 11 Mb/s */ +#define IW_MODUL_11B (IW_MODUL_DS | IW_MODUL_CCK) +#define IW_MODUL_PBCC 0x00000008 /* TI : 5.5 + 11 + 22 Mb/s */ +#define IW_MODUL_OFDM_A 0x00000010 /* 802.11a : 54 Mb/s */ +#define IW_MODUL_11A (IW_MODUL_OFDM_A) +#define IW_MODUL_11AB (IW_MODUL_11B | IW_MODUL_11A) +#define IW_MODUL_OFDM_G 0x00000020 /* 802.11g : 54 Mb/s */ +#define IW_MODUL_11G (IW_MODUL_11B | IW_MODUL_OFDM_G) +#define IW_MODUL_11AG (IW_MODUL_11G | IW_MODUL_11A) +#define IW_MODUL_TURBO 0x00000040 /* ATH : bonding, 108 Mb/s */ +/* In here we should define MIMO stuff. Later... */ +#define IW_MODUL_CUSTOM 0x40000000 /* Driver specific */ + +/* Bitrate flags available */ +#define IW_BITRATE_TYPE 0x00FF /* Type of value */ +#define IW_BITRATE_UNICAST 0x0001 /* Maximum/Fixed unicast bitrate */ +#define IW_BITRATE_BROADCAST 0x0002 /* Fixed broadcast bitrate */ + +/****************************** TYPES ******************************/ + +/* --------------------------- SUBTYPES --------------------------- */ +/* + * Generic format for most parameters that fit in an int + */ +struct iw_param +{ + int32_t value; /* The value of the parameter itself */ + uint8_t fixed; /* Hardware should not use auto select */ + uint8_t disabled; /* Disable the feature */ + uint16_t flags; /* Various specifc flags (if any) */ +}; + +/* + * For all data larger than 16 octets, we need to use a + * pointer to memory allocated in user space. + */ +struct iw_point +{ + void *pointer; /* Pointer to the data (in user space) */ + uint16_t length; /* number of fields or size in bytes */ + uint16_t flags; /* Optional params */ +}; + +/* + * A frequency + * For numbers lower than 10^9, we encode the number in 'm' and + * set 'e' to 0 + * For number greater than 10^9, we divide it by the lowest power + * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... + * The power of 10 is in 'e', the result of the division is in 'm'. + */ +struct iw_freq +{ + int32_t m; /* Mantissa */ + int16_t e; /* Exponent */ + uint8_t i; /* List index (when in range struct) */ + uint8_t flags; /* Flags (fixed/auto) */ +}; + +/* + * Quality of the link + */ +struct iw_quality +{ + uint8_t qual; /* link quality (%retries, SNR, + %missed beacons or better...) */ + uint8_t level; /* signal level (dBm) */ + uint8_t noise; /* noise level (dBm) */ + uint8_t updated; /* Flags to know if updated */ +}; + +/* + * Packet discarded in the wireless adapter due to + * "wireless" specific problems... + * Note : the list of counter and statistics in net_device_stats + * is already pretty exhaustive, and you should use that first. + * This is only additional stats... + */ +struct iw_discarded +{ + uint32_t nwid; /* Rx : Wrong nwid/essid */ + uint32_t code; /* Rx : Unable to code/decode (WEP) */ + uint32_t fragment; /* Rx : Can't perform MAC reassembly */ + uint32_t retries; /* Tx : Max MAC retries num reached */ + uint32_t misc; /* Others cases */ +}; + +/* + * Packet/Time period missed in the wireless adapter due to + * "wireless" specific problems... + */ +struct iw_missed +{ + uint32_t beacon; /* Missed beacons/superframe */ +}; + +/* + * Quality range (for spy threshold) + */ +struct iw_thrspy +{ + struct sockaddr addr; /* Source address (hw/mac) */ + struct iw_quality qual; /* Quality of the link */ + struct iw_quality low; /* Low threshold */ + struct iw_quality high; /* High threshold */ +}; + +/* + * Optional data for scan request + * + * Note: these optional parameters are controlling parameters for the + * scanning behavior, these do not apply to getting scan results + * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and + * provide a merged results with all BSSes even if the previous scan + * request limited scanning to a subset, e.g., by specifying an SSID. + * Especially, scan results are required to include an entry for the + * current BSS if the driver is in Managed mode and associated with an AP. + */ +struct iw_scan_req +{ + uint8_t scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ + uint8_t essid_len; + uint8_t num_channels; /* num entries in channel_list; + * 0 = scan all allowed channels */ + uint8_t flags; /* reserved as padding; use zero, this may + * be used in the future for adding flags + * to request different scan behavior */ + struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or + * individual address of a specific BSS */ + + /* + * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using + * the current ESSID. This allows scan requests for specific ESSID + * without having to change the current ESSID and potentially breaking + * the current association. + */ + uint8_t essid[IW_ESSID_MAX_SIZE]; + + /* + * Optional parameters for changing the default scanning behavior. + * These are based on the MLME-SCAN.request from IEEE Std 802.11. + * TU is 1.024 ms. If these are set to 0, driver is expected to use + * reasonable default values. min_channel_time defines the time that + * will be used to wait for the first reply on each channel. If no + * replies are received, next channel will be scanned after this. If + * replies are received, total time waited on the channel is defined by + * max_channel_time. + */ + uint32_t min_channel_time; /* in TU */ + uint32_t max_channel_time; /* in TU */ + + struct iw_freq channel_list[IW_MAX_FREQUENCIES]; +}; + +/* ------------------------- WPA SUPPORT ------------------------- */ + +/* + * Extended data structure for get/set encoding (this is used with + * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* + * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and + * only the data contents changes (key data -> this structure, including + * key data). + * + * If the new key is the first group key, it will be set as the default + * TX key. Otherwise, default TX key index is only changed if + * IW_ENCODE_EXT_SET_TX_KEY flag is set. + * + * Key will be changed with SIOCSIWENCODEEXT in all cases except for + * special "change TX key index" operation which is indicated by setting + * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. + * + * tx_seq/rx_seq are only used when respective + * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal + * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start + * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally + * used only by an Authenticator (AP or an IBSS station) to get the + * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and + * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for + * debugging/testing. + */ +struct iw_encode_ext +{ + uint32_t ext_flags; /* IW_ENCODE_EXT_* */ + uint8_t tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + uint8_t rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast + * (group) keys or unicast address for + * individual keys */ + uint16_t alg; /* IW_ENCODE_ALG_* */ + uint16_t key_len; + uint8_t key[1]; +}; + +/* SIOCSIWMLME data */ +struct iw_mlme +{ + uint16_t cmd; /* IW_MLME_* */ + uint16_t reason_code; + struct sockaddr addr; +}; + +/* SIOCSIWPMKSA data */ +#define IW_PMKSA_ADD 1 +#define IW_PMKSA_REMOVE 2 +#define IW_PMKSA_FLUSH 3 + +#define IW_PMKID_LEN 16 + +struct iw_pmksa +{ + uint32_t cmd; /* IW_PMKSA_* */ + struct sockaddr bssid; + uint8_t pmkid[IW_PMKID_LEN]; +}; + +/* IWEVMICHAELMICFAILURE data */ +struct iw_michaelmicfailure +{ + uint32_t flags; + struct sockaddr src_addr; + uint8_t tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ +}; + +/* IWEVPMKIDCAND data */ +#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ +struct iw_pmkid_cand +{ + uint32_t flags; /* IW_PMKID_CAND_* */ + uint32_t index; /* the smaller the index, the higher the + * priority */ + struct sockaddr bssid; +}; + +/* ------------------------ WIRELESS STATS ------------------------ */ +/* + * Wireless statistics (used for /proc/net/wireless) + */ +struct iw_statistics +{ + uint16_t status; /* Status + * - device dependent for now */ + + struct iw_quality qual; /* Quality of the link + * (instant/mean/max) */ + struct iw_discarded discard; /* Packet discarded counts */ + struct iw_missed miss; /* Packet missed counts */ +}; + +/* ------------------------ IOCTL REQUEST ------------------------ */ +/* + * This structure defines the payload of an ioctl, and is used + * below. + * + * Note that this structure should fit on the memory footprint + * of iwreq (which is the same as ifreq), which mean a max size of + * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... + * You should check this when increasing the structures defined + * above in this file... + */ +union iwreq_data +{ + /* Config - generic */ + char name[16]; + /* Name : used to verify the presence of wireless extensions. + * Name of the protocol/provider... */ + + struct iw_point essid; /* Extended network name */ + struct iw_param nwid; /* network id (or domain - the cell) */ + struct iw_freq freq; /* frequency or channel : + * 0-1000 = channel + * > 1000 = frequency in Hz */ + + struct iw_param sens; /* signal level threshold */ + struct iw_param bitrate; /* default bit rate */ + struct iw_param txpower; /* default transmit power */ + struct iw_param rts; /* RTS threshold threshold */ + struct iw_param frag; /* Fragmentation threshold */ + uint32_t mode; /* Operation mode */ + struct iw_param retry; /* Retry limits & lifetime */ + + struct iw_point encoding; /* Encoding stuff : tokens */ + struct iw_param power; /* PM duration/timeout */ + struct iw_quality qual; /* Quality part of statistics */ + + struct sockaddr ap_addr; /* Access point address */ + struct sockaddr addr; /* Destination address (hw/mac) */ + + struct iw_param param; /* Other small parameters */ + struct iw_point data; /* Other large parameters */ +}; + +/* + * The structure to exchange data for ioctl. + * This structure is the same as 'struct ifreq', but (re)defined for + * convenience... + * Do I need to remind you about structure size (32 octets) ? + */ +struct iwreq +{ + union + { + char ifrn_name[16]; /* if name, e.g. "eth0" */ + } ifr_ifrn; + + /* Data part (defined just above) */ + union iwreq_data u; +}; + +/* -------------------------- IOCTL DATA -------------------------- */ +/* + * For those ioctl which want to exchange mode data that what could + * fit in the above structure... + */ + +/* + * Range of parameters + */ + +struct iw_range +{ + /* Informative stuff (to choose between different interface) */ + uint32_t throughput; /* To give an idea... */ + /* In theory this value should be the maximum benchmarked + * TCP/IP throughput, because with most of these devices the + * bit rate is meaningless (overhead an co) to estimate how + * fast the connection will go and pick the fastest one. + * I suggest people to play with Netperf or any benchmark... + */ + + /* NWID (or domain id) */ + uint32_t min_nwid; /* Minimal NWID we are able to set */ + uint32_t max_nwid; /* Maximal NWID we are able to set */ + + /* Old Frequency (backward compat - moved lower ) */ + uint16_t old_num_channels; + uint8_t old_num_frequency; + + /* Wireless event capability bitmasks */ + uint32_t event_capa[6]; + + /* signal level threshold range */ + int32_t sensitivity; + + /* Quality of link & SNR stuff */ + /* Quality range (link, level, noise) + * If the quality is absolute, it will be in the range [0 ; max_qual], + * if the quality is dBm, it will be in the range [max_qual ; 0]. + * Don't forget that we use 8 bit arithmetics... */ + struct iw_quality max_qual; /* Quality of the link */ + /* This should contain the average/typical values of the quality + * indicator. This should be the threshold between a "good" and + * a "bad" link (example : monitor going from green to orange). + * Currently, user space apps like quality monitors don't have any + * way to calibrate the measurement. With this, they can split + * the range between 0 and max_qual in different quality level + * (using a geometric subdivision centered on the average). + * I expect that people doing the user space apps will feedback + * us on which value we need to put in each driver... */ + struct iw_quality avg_qual; /* Quality of the link */ + + /* Rates */ + uint8_t num_bitrates; /* Number of entries in the list */ + int32_t bitrate[IW_MAX_BITRATES]; /* list, in bps */ + + /* RTS threshold */ + int32_t min_rts; /* Minimal RTS threshold */ + int32_t max_rts; /* Maximal RTS threshold */ + + /* Frag threshold */ + int32_t min_frag; /* Minimal frag threshold */ + int32_t max_frag; /* Maximal frag threshold */ + + /* Power Management duration & timeout */ + int32_t min_pmp; /* Minimal PM period */ + int32_t max_pmp; /* Maximal PM period */ + int32_t min_pmt; /* Minimal PM timeout */ + int32_t max_pmt; /* Maximal PM timeout */ + uint16_t pmp_flags; /* How to decode max/min PM period */ + uint16_t pmt_flags; /* How to decode max/min PM timeout */ + uint16_t pm_capa; /* What PM options are supported */ + + /* Encoder stuff */ + uint16_t encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ + uint8_t num_encoding_sizes; /* Number of entry in the list */ + uint8_t max_encoding_tokens; /* Max number of tokens */ + /* For drivers that need a "login/passwd" form */ + uint8_t encoding_login_index; /* token index for login token */ + + /* Transmit power */ + uint16_t txpower_capa; /* What options are supported */ + uint8_t num_txpower; /* Number of entries in the list */ + int32_t txpower[IW_MAX_TXPOWER]; /* list, in bps */ + + /* Wireless Extension version info */ + uint8_t we_version_compiled; /* Must be WIRELESS_EXT */ + uint8_t we_version_source; /* Last update of source */ + + /* Retry limits and lifetime */ + uint16_t retry_capa; /* What retry options are supported */ + uint16_t retry_flags; /* How to decode max/min retry limit */ + uint16_t r_time_flags; /* How to decode max/min retry life */ + int32_t min_retry; /* Minimal number of retries */ + int32_t max_retry; /* Maximal number of retries */ + int32_t min_r_time; /* Minimal retry lifetime */ + int32_t max_r_time; /* Maximal retry lifetime */ + + /* Frequency */ + uint16_t num_channels; /* Number of channels [0; num - 1] */ + uint8_t num_frequency; /* Number of entry in the list */ + struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ + /* Note : this frequency list doesn't need to fit channel numbers, + * because each entry contain its channel index */ + + uint32_t enc_capa; /* IW_ENC_CAPA_* bit field */ + + /* More power management stuff */ + int32_t min_pms; /* Minimal PM saving */ + int32_t max_pms; /* Maximal PM saving */ + uint16_t pms_flags; /* How to decode max/min PM saving */ + + /* All available modulations for driver (hw may support less) */ + int32_t modul_capa; /* IW_MODUL_* bit field */ + + /* More bitrate stuff */ + uint32_t bitrate_capa; /* Types of bitrates supported */ +}; + +/* + * Private ioctl interface information + */ + +struct iw_priv_args +{ + uint32_t cmd; /* Number of the ioctl to issue */ + uint16_t set_args; /* Type and number of args */ + uint16_t get_args; /* Type and number of args */ + char name[16]; /* Name of the extension */ +}; + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* + * Wireless events are carried through the rtnetlink socket to user + * space. They are encapsulated in the IFLA_WIRELESS field of + * a RTM_NEWLINK message. + */ + +/* + * A Wireless Event. Contains basically the same data as the ioctl... + */ +struct iw_event +{ + uint16_t len; /* Real lenght of this stuff */ + uint16_t cmd; /* Wireless IOCTL */ + union iwreq_data u; /* IOCTL fixed payload */ +}; + +/* Size of the Event prefix (including padding and alignement junk) */ +#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) +/* Size of the various events */ +#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) +#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(uint32_t)) +#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) + +/* iw_point events are special. First, the payload (extra data) come at + * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, + * we omit the pointer, so start at an offset. */ +#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ + (char *) NULL) +#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ + IW_EV_POINT_OFF) + +/* Size of the Event prefix when packed in stream */ +#define IW_EV_LCP_PK_LEN (4) +/* Size of the various events when packed in stream */ +#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) +#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(uint32_t)) +#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) +#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) + +#endif /* _LINUX_WIRELESS_H */ diff --git a/package/network/utils/iwinfo/src/include/iwinfo/api/broadcom.h b/package/network/utils/iwinfo/src/include/iwinfo/api/broadcom.h deleted file mode 100644 index c7aa33e415..0000000000 --- a/package/network/utils/iwinfo/src/include/iwinfo/api/broadcom.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Custom OID/ioctl definitions for - * Broadcom 802.11abg Networking Device Driver - * - * Definitions subject to change without notice. - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef _BROADCOM_H -#define _BROADCOM_H - -#define WL_MCSSET_LEN 16 -#define WL_MAX_STA_COUNT 32 - -#define WL_BSS_RSSI_OFFSET 82 -#define WL_BSS_NOISE_OFFSET 84 - -#define WLC_IOCTL_MAGIC 0x14e46c77 -#define WLC_IOCTL_MAXLEN 8192 - -#define WLC_CNTRY_BUF_SZ 4 - -#define WLC_GET_MAGIC 0 -#define WLC_GET_RATE 12 -#define WLC_GET_INFRA 19 -#define WLC_GET_AUTH 21 -#define WLC_GET_BSSID 23 -#define WLC_GET_SSID 25 -#define WLC_GET_CHANNEL 29 -#define WLC_GET_PHYTYPE 39 -#define WLC_GET_PASSIVE 48 -#define WLC_GET_COUNTRY 83 -#define WLC_GET_REVINFO 98 -#define WLC_GET_AP 117 -#define WLC_GET_RSSI 127 -#define WLC_GET_WSEC 133 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_WPA_AUTH 164 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 - -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 - -#define WLC_BAND_5G 1 -#define WLC_BAND_2G 2 -#define WLC_BAND_ALL 3 - - -struct wl_ether_addr { - uint8_t octet[6]; -}; - -struct wl_maclist { - uint count; - struct wl_ether_addr ea[1]; -}; - -typedef struct wl_sta_rssi { - int rssi; - char mac[6]; - uint16_t foo; -} wl_sta_rssi_t; - -#define WL_NUMRATES 255 /* max # of rates in a rateset */ -typedef struct wl_rateset { - uint32_t count; /* # rates in this set */ - uint8_t rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -typedef struct wl_sta_info { - uint16_t ver; /* version of this struct */ - uint16_t len; /* length in bytes of this structure */ - uint16_t cap; /* sta's advertised capabilities */ - uint32_t flags; /* flags defined below */ - uint32_t idle; /* time since data pkt rx'd from sta */ - unsigned char ea[6]; /* Station address */ - wl_rateset_t rateset; /* rateset in use */ - uint32_t in; /* seconds elapsed since associated */ - uint32_t listen_interval_inms; /* Min Listen interval in ms for this STA */ - uint32_t tx_pkts; /* # of packets transmitted */ - uint32_t tx_failures; /* # of packets failed */ - uint32_t rx_ucast_pkts; /* # of unicast packets received */ - uint32_t rx_mcast_pkts; /* # of multicast packets received */ - uint32_t tx_rate; /* Rate of last successful tx frame */ - uint32_t rx_rate; /* Rate of last successful rx frame */ -} wl_sta_info_t; - -typedef struct wlc_ssid { - uint32_t ssid_len; - unsigned char ssid[32]; -} wlc_ssid_t; - -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint32_t cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint32_t len; /* length of user buffer */ - uint8_t set; /* get or set request (optional) */ - uint32_t used; /* bytes read or written (optional) */ - uint32_t needed; /* bytes needed (optional) */ -} wl_ioctl_t; - -/* Revision info */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ - uint phytype; /* phy type */ - uint phyrev; /* phy revision */ - uint anarev; /* anacore rev */ -} wlc_rev_info_t; - -typedef struct wl_country_list { - uint32_t buflen; - uint32_t band_set; - uint32_t band; - uint32_t count; - char country_abbrev[1]; -} wl_country_list_t; - - -#endif diff --git a/package/network/utils/iwinfo/src/include/iwinfo/api/madwifi.h b/package/network/utils/iwinfo/src/include/iwinfo/api/madwifi.h deleted file mode 100644 index 80d32e1959..0000000000 --- a/package/network/utils/iwinfo/src/include/iwinfo/api/madwifi.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Header bits derived from MadWifi source: - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Distributed under the terms of the GPLv2 license. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _MADWIFI_H -#define _MADWIFI_H - -/* ieee80211.h */ -#define IEEE80211_ADDR_LEN 6 -#define IEEE80211_RATE_VAL 0x7f -#define IEEE80211_SEQ_SEQ_MASK 0xfff0 -#define IEEE80211_SEQ_SEQ_SHIFT 4 - - -/* ieee80211_crypto.h */ -#define IEEE80211_KEYBUF_SIZE 16 -#define IEEE80211_MICBUF_SIZE 16 -#define IEEE80211_TID_SIZE 17 - -#define IEEE80211_CIPHER_WEP 0 -#define IEEE80211_CIPHER_TKIP 1 -#define IEEE80211_CIPHER_AES_OCB 2 -#define IEEE80211_CIPHER_AES_CCM 3 -#define IEEE80211_CIPHER_CKIP 5 -#define IEEE80211_CIPHER_NONE 6 -#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE + 1) - - -/* ieee80211_ioctl.h */ -#define IEEE80211_KEY_DEFAULT 0x80 -#define IEEE80211_CHAN_MAX 255 -#define IEEE80211_CHAN_BYTES 32 -#define IEEE80211_RATE_MAXSIZE 15 - -#define IEEE80211_IOCTL_GETKEY (SIOCDEVPRIVATE+3) -#define IEEE80211_IOCTL_STA_STATS (SIOCDEVPRIVATE+5) -#define IEEE80211_IOCTL_STA_INFO (SIOCDEVPRIVATE+6) - -#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) -#define IEEE80211_IOCTL_GETMODE (SIOCIWFIRSTPRIV+3) -#define IEEE80211_IOCTL_GETCHANLIST (SIOCIWFIRSTPRIV+7) -#define IEEE80211_IOCTL_GETCHANINFO (SIOCIWFIRSTPRIV+13) - -#define SIOC80211IFCREATE (SIOCDEVPRIVATE+7) -#define SIOC80211IFDESTROY (SIOCDEVPRIVATE+8) - -#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */ -#define IEEE80211_NO_STABEACONS 0x0002 /* Do not setup the station beacon timers */ - -struct ieee80211_clone_params { - char icp_name[IFNAMSIZ]; /* device name */ - u_int16_t icp_opmode; /* operating mode */ - u_int16_t icp_flags; /* see below */ -}; - -enum ieee80211_opmode { - IEEE80211_M_STA = 1, /* infrastructure station */ - IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ - IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ - IEEE80211_M_HOSTAP = 6, /* Software Access Point */ - IEEE80211_M_MONITOR = 8, /* Monitor mode */ - IEEE80211_M_WDS = 2, /* WDS link */ -}; - -enum { - IEEE80211_PARAM_AUTHMODE = 3, /* authentication mode */ - IEEE80211_PARAM_MCASTCIPHER = 5, /* multicast/default cipher */ - IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ - IEEE80211_PARAM_UCASTCIPHERS = 7, /* unicast cipher suites */ - IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ -}; - -/* - * Authentication mode. - */ -enum ieee80211_authmode { - IEEE80211_AUTH_NONE = 0, - IEEE80211_AUTH_OPEN = 1, /* open */ - IEEE80211_AUTH_SHARED = 2, /* shared-key */ - IEEE80211_AUTH_8021X = 3, /* 802.1x */ - IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ - /* NB: these are used only for ioctls */ - IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ -}; - -struct ieee80211_channel { - u_int16_t ic_freq; /* setting in MHz */ - u_int16_t ic_flags; /* see below */ - u_int8_t ic_ieee; /* IEEE channel number */ - int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ - int8_t ic_maxpower; /* maximum tx power in dBm */ - int8_t ic_minpower; /* minimum tx power in dBm */ - u_int8_t ic_scanflags; - u_int8_t ic_idletime; /* phy idle time in % */ -}; - -struct ieee80211req_key { - u_int8_t ik_type; /* key/cipher type */ - u_int8_t ik_pad; - u_int16_t ik_keyix; /* key index */ - u_int8_t ik_keylen; /* key length in bytes */ - u_int8_t ik_flags; - u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; - u_int64_t ik_keyrsc; /* key receive sequence counter */ - u_int64_t ik_keytsc; /* key transmit sequence counter */ - u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -}; - -struct ieee80211req_chanlist { - u_int8_t ic_channels[IEEE80211_CHAN_BYTES]; -}; - -struct ieee80211req_chaninfo { - u_int ic_nchans; - struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX]; -}; - -struct ieee80211req_sta_info { - u_int16_t isi_len; /* length (mult of 4) */ - u_int16_t isi_freq; /* MHz */ - u_int16_t isi_flags; /* channel flags */ - u_int16_t isi_state; /* state flags */ - u_int8_t isi_authmode; /* authentication algorithm */ - u_int8_t isi_rssi; - int8_t isi_noise; - u_int16_t isi_capinfo; /* capabilities */ - u_int8_t isi_athflags; /* Atheros capabilities */ - u_int8_t isi_erp; /* ERP element */ - u_int8_t isi_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t isi_nrates; /* negotiated rates */ - u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isi_txrate; /* index to isi_rates[] */ - u_int16_t isi_ie_len; /* IE length */ - u_int16_t isi_associd; /* assoc response */ - u_int16_t isi_txpower; /* current tx power */ - u_int16_t isi_vlan; /* vlan tag */ - u_int16_t isi_txseqs[17]; /* seq to be transmitted */ - u_int16_t isi_rxseqs[17]; /* seq previous for qos frames*/ - u_int16_t isi_inact; /* inactivity timer */ - u_int8_t isi_uapsd; /* UAPSD queues */ - u_int8_t isi_opmode; /* sta operating mode */ -}; - -#endif diff --git a/package/network/utils/iwinfo/src/include/iwinfo/api/nl80211.h b/package/network/utils/iwinfo/src/include/iwinfo/api/nl80211.h deleted file mode 100644 index d73dcb8e81..0000000000 --- a/package/network/utils/iwinfo/src/include/iwinfo/api/nl80211.h +++ /dev/null @@ -1,2834 +0,0 @@ -#ifndef __LINUX_NL80211_H -#define __LINUX_NL80211_H -/* - * 802.11 netlink interface public header - * - * Copyright 2006-2010 Johannes Berg - * Copyright 2008 Michael Wu - * Copyright 2008 Luis Carlos Cobo - * Copyright 2008 Michael Buesch - * Copyright 2008, 2009 Luis R. Rodriguez - * Copyright 2008 Jouni Malinen - * Copyright 2008 Colin McCabe - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include - -/** - * DOC: Station handling - * - * Stations are added per interface, but a special case exists with VLAN - * interfaces. When a station is bound to an AP interface, it may be moved - * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). - * The station is still assumed to belong to the AP interface it was added - * to. - * - * TODO: need more info? - */ - -/** - * DOC: Frame transmission/registration support - * - * Frame transmission and registration support exists to allow userspace - * management entities such as wpa_supplicant react to management frames - * that are not being handled by the kernel. This includes, for example, - * certain classes of action frames that cannot be handled in the kernel - * for various reasons. - * - * Frame registration is done on a per-interface basis and registrations - * cannot be removed other than by closing the socket. It is possible to - * specify a registration filter to register, for example, only for a - * certain type of action frame. In particular with action frames, those - * that userspace registers for will not be returned as unhandled by the - * driver, so that the registered application has to take responsibility - * for doing that. - * - * The type of frame that can be registered for is also dependent on the - * driver and interface type. The frame types are advertised in wiphy - * attributes so applications know what to expect. - * - * NOTE: When an interface changes type while registrations are active, - * these registrations are ignored until the interface type is - * changed again. This means that changing the interface type can - * lead to a situation that couldn't otherwise be produced, but - * any such registrations will be dormant in the sense that they - * will not be serviced, i.e. they will not receive any frames. - * - * Frame transmission allows userspace to send for example the required - * responses to action frames. It is subject to some sanity checking, - * but many frames can be transmitted. When a frame was transmitted, its - * status is indicated to the sending socket. - * - * For more technical details, see the corresponding command descriptions - * below. - */ - -/** - * DOC: Virtual interface / concurrency capabilities - * - * Some devices are able to operate with virtual MACs, they can have - * more than one virtual interface. The capability handling for this - * is a bit complex though, as there may be a number of restrictions - * on the types of concurrency that are supported. - * - * To start with, each device supports the interface types listed in - * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the - * types there no concurrency is implied. - * - * Once concurrency is desired, more attributes must be observed: - * To start with, since some interface types are purely managed in - * software, like the AP-VLAN type in mac80211 for example, there's - * an additional list of these, they can be added at any time and - * are only restricted by some semantic restrictions (e.g. AP-VLAN - * cannot be added without a corresponding AP interface). This list - * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. - * - * Further, the list of supported combinations is exported. This is - * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, - * it exports a list of "groups", and at any point in time the - * interfaces that are currently active must fall into any one of - * the advertised groups. Within each group, there are restrictions - * on the number of interfaces of different types that are supported - * and also the number of different channels, along with potentially - * some other restrictions. See &enum nl80211_if_combination_attrs. - * - * All together, these attributes define the concurrency of virtual - * interfaces that a given device supports. - */ - -/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors - * - * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. - * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request - * or rename notification. Has attributes %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. - * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes - * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. - * - * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; - * either a dump request on a %NL80211_ATTR_WIPHY or a specific get - * on an %NL80211_ATTR_IFINDEX is supported. - * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. - * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response - * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, - * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also - * be sent from userspace to request creation of a new virtual interface, - * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and - * %NL80211_ATTR_IFNAME. - * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from - * userspace to request deletion of a virtual interface, then requires - * attribute %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. - * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, - * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. - * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. - * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. - * - * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a - * %NL80222_CMD_NEW_BEACON message) - * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface - * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. - * Following attributes are provided for drivers that generate full Beacon - * and Probe Response frames internally: %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, - * %NL80211_ATTR_IE_ASSOC_RESP. - * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, - * parameters are like for %NL80211_CMD_SET_BEACON. - * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it - * - * @NL80211_CMD_GET_STATION: Get station attributes for station identified by - * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_STATION: Set station attributes for station identified by - * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by - * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. - * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by - * %NL80211_ATTR_MAC. - * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all mesh paths, on the interface identified - * by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by - * %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set - * regulatory domain. - * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command - * after being queried by the kernel. CRDA replies by sending a regulatory - * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our - * current alpha2 if it found a match. It also provides - * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each - * regulatory rule is a nested set of attributes given by - * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and - * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by - * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and - * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. - * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - * to the specified ISO/IEC 3166-1 alpha2 country code. The core will - * store this as a valid request and then query userspace for it. - * - * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the - * interface identified by %NL80211_ATTR_IFINDEX - * - * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the - * interface identified by %NL80211_ATTR_IFINDEX - * - * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The - * interface is identified with %NL80211_ATTR_IFINDEX and the management - * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be - * added to the end of the specified management frame is specified with - * %NL80211_ATTR_IE. If the command succeeds, the requested data will be - * added to all specified management frames generated by - * kernel/firmware/driver. - * Note: This command has been removed and it is only reserved at this - * point to avoid re-using existing command number. The functionality this - * command was planned for has been provided with cleaner design with the - * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, - * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, - * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. - * - * @NL80211_CMD_GET_SCAN: get scan results - * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters - * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * probe requests at CCK rate or not. - * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to - * NL80211_CMD_GET_SCAN and on the "scan" multicast group) - * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, - * partial scan results may be available - * - * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain - * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. - * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) - * are passed, they are used in the probe requests. For - * broadcast, a broadcast SSID must be passed (ie. an empty - * string). If no SSID is passed, no probe requests are sent and - * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, - * if passed, define which channels should be scanned; if not - * passed, all channels allowed for the current regulatory domain - * are used. Extra IEs can also be passed from the userspace by - * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. - * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan - * results available. - * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has - * stopped. The driver may issue this event at any time during a - * scheduled scan. One reason for stopping the scan is if the hardware - * does not support starting an association or a normal scan while running - * a scheduled scan. This event is also sent when the - * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface - * is brought down while a scheduled scan was running. - * - * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation - * or noise level - * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to - * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) - * - * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain - * has been changed and provides details of the request information - * that caused the change such as who initiated the regulatory request - * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx - * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if - * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or - * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain - * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is - * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on - * to (%NL80211_ATTR_REG_ALPHA2). - * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon - * has been found while world roaming thus enabling active scan or - * any mode of operation that initiates TX (beacons) on a channel - * where we would not have been able to do either before. As an example - * if you are world roaming (regulatory domain set to world or if your - * driver is using a custom world roaming regulatory domain) and while - * doing a passive scan on the 5 GHz band you find an AP there (if not - * on a DFS channel) you will now be able to actively scan for that AP - * or use AP mode on your card on that same channel. Note that this will - * never be used for channels 1-11 on the 2 GHz band as they are always - * enabled world wide. This beacon hint is only sent if your device had - * either disabled active scanning or beaconing on a channel. We send to - * userspace the wiphy on which we removed a restriction from - * (%NL80211_ATTR_WIPHY) and the channel on which this occurred - * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) - * the beacon hint was processed. - * - * @NL80211_CMD_AUTHENTICATE: authentication request and notification. - * This command is used both as a command (request to authenticate) and - * as an event on the "mlme" multicast group indicating completion of the - * authentication process. - * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the - * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and - * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify - * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. - * When used as an event, this reports reception of an Authentication - * frame in station and IBSS modes when the local MLME processed the - * frame, i.e., it was for the local STA and was received in correct - * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the - * MLME SAP interface (kernel providing MLME, userspace SME). The - * included %NL80211_ATTR_FRAME attribute contains the management frame - * (including both the header and frame body, but not FCS). This event is - * also used to indicate if the authentication attempt timed out. In that - * case the %NL80211_ATTR_FRAME attribute is replaced with a - * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which - * pending authentication timed out). - * @NL80211_CMD_ASSOCIATE: association request and notification; like - * NL80211_CMD_AUTHENTICATE but for Association and Reassociation - * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, - * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). - * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like - * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to - * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication - * primitives). - * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like - * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to - * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). - * - * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael - * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the - * event includes %NL80211_ATTR_MAC to describe the source MAC address of - * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key - * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and - * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this - * event matches with MLME-MICHAELMICFAILURE.indication() primitive - * - * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a - * FREQ attribute (for the initial frequency if no peer can be found) - * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those - * should be fixed rather than automatically determined. Can only be - * executed on a network interface that is UP, and fixed BSSID/FREQ - * may be rejected. Another optional parameter is the beacon interval, - * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not - * given defaults to 100 TU (102.4ms). - * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is - * determined by the network interface. - * - * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute - * to identify the device, and the TESTDATA blob attribute to pass through - * to the driver. - * - * @NL80211_CMD_CONNECT: connection request and notification; this command - * requests to connect to a specified network but without separating - * auth and assoc steps. For this, you need to specify the SSID in a - * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. - * It is also sent as an event, with the BSSID and response IEs when the - * connection is established or failed to be established. This can be - * determined by the STATUS_CODE attribute. - * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), - * sent as an event when the card/driver roamed by itself. - * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify - * userspace that a connection was dropped by the AP or due to other - * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and - * %NL80211_ATTR_REASON_CODE attributes are used. - * - * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices - * associated with this wiphy must be down and will follow. - * - * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified - * channel for the specified amount of time. This can be used to do - * off-channel operations like transmit a Public Action frame and wait for - * a response while being associated to an AP on another channel. - * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus - * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. - * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds - * to remain on the channel. This command is also used as an event to - * notify when the requested duration starts (it may take a while for the - * driver to schedule this time due to other concurrent needs for the - * radio). - * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) - * that will be included with any events pertaining to this request; - * the cookie is also used to cancel the request. - * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a - * pending remain-on-channel duration if the desired operation has been - * completed prior to expiration of the originally requested duration. - * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the - * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to - * uniquely identify the request. - * This command is also used as an event to notify when a requested - * remain-on-channel duration has expired. - * - * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX - * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface - * and @NL80211_ATTR_TX_RATES the set of allowed rates. - * - * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames - * (via @NL80211_CMD_FRAME) for processing in userspace. This command - * requires an interface index, a frame type attribute (optional for - * backward compatibility reasons, if not given assumes action frames) - * and a match attribute containing the first few bytes of the frame - * that should match, e.g. a single byte for only a category match or - * four bytes for vendor frames including the OUI. The registration - * cannot be dropped, but is removed automatically when the netlink - * socket is closed. Multiple registrations can be made. - * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for - * backward compatibility - * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This - * command is used both as a request to transmit a management frame and - * as an event indicating reception of a frame that was not processed in - * kernel code, but is for us (i.e., which may need to be processed in a - * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time - * specified using %NL80211_ATTR_DURATION. When called, this operation - * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the - * TX status event pertaining to the TX request. - * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * management frames at CCK rate or not in 2GHz band. - * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this - * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. - * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. - * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame - * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies - * the TX command and %NL80211_ATTR_FRAME includes the contents of the - * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. - * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for - * backward compatibility. - * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command - * is used to configure connection quality monitoring notification trigger - * levels. - * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This - * command is used as an event to indicate the that a trigger level was - * reached. - * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. - * In case multiple channels are supported by the device, the mechanism - * with which it switches channels is implementation-defined. - * When a monitor interface is given, it can only switch channel while - * no other interfaces are operating to avoid disturbing the operation - * of any other interfaces, and other interfaces will again take - * precedence when they are used. - * - * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. - * - * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial - * mesh config parameters may be given. - * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the - * network is determined by the network interface. - * - * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame - * notification. This event is used to indicate that an unprotected - * deauthentication frame was dropped when MFP is in use. - * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame - * notification. This event is used to indicate that an unprotected - * disassociation frame was dropped when MFP is in use. - * - * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a - * beacon or probe response from a compatible mesh peer. This is only - * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from - * reoccurring, the userspace authentication daemon may want to create the - * new station with the AUTHENTICATED flag unset and maybe change it later - * depending on the authentication result. - * - * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. - * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. - * Since wireless is more complex than wired ethernet, it supports - * various triggers. These triggers can be configured through this - * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For - * more background information, see - * http://wireless.kernel.org/en/users/Documentation/WoWLAN. - * - * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver - * the necessary information for supporting GTK rekey offload. This - * feature is typically used during WoWLAN. The configuration data - * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and - * contains the data in sub-attributes). After rekeying happened, - * this command may also be sent by the driver as an MLME event to - * inform userspace of the new replay counter. - * - * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace - * of PMKSA caching dandidates. - * - * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). - * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. - * - * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP - * (or GO) interface (i.e. hostapd) to ask for unexpected frames to - * implement sending deauth to stations that send unexpected class 3 - * frames. Also used as the event sent by the kernel when such a frame - * is received. - * For the event, the %NL80211_ATTR_MAC attribute carries the TA and - * other attributes like the interface index are present. - * If used as the command it must have an interface index and you can - * only unsubscribe from the event by closing the socket. Subscription - * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. - * - * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the - * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame - * and wasn't already in a 4-addr VLAN. The event will be sent similarly - * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. - * - * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface - * by sending a null data frame to it and reporting when the frame is - * acknowleged. This is used to allow timing out inactive clients. Uses - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a - * direct reply with an %NL80211_ATTR_COOKIE that is later used to match - * up the event with the request. The event includes the same data and - * has %NL80211_ATTR_ACK set if the frame was ACKed. - * - * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from - * other BSSes when any interfaces are in AP mode. This helps implement - * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME - * messages. Note that per PHY only one application may register. - * - * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether - * No Acknowledgement Policy should be applied. - * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -enum nl80211_commands { -/* don't change the order or add anything between, this is ABI! */ - NL80211_CMD_UNSPEC, - - NL80211_CMD_GET_WIPHY, /* can dump */ - NL80211_CMD_SET_WIPHY, - NL80211_CMD_NEW_WIPHY, - NL80211_CMD_DEL_WIPHY, - - NL80211_CMD_GET_INTERFACE, /* can dump */ - NL80211_CMD_SET_INTERFACE, - NL80211_CMD_NEW_INTERFACE, - NL80211_CMD_DEL_INTERFACE, - - NL80211_CMD_GET_KEY, - NL80211_CMD_SET_KEY, - NL80211_CMD_NEW_KEY, - NL80211_CMD_DEL_KEY, - - NL80211_CMD_GET_BEACON, - NL80211_CMD_SET_BEACON, - NL80211_CMD_NEW_BEACON, - NL80211_CMD_DEL_BEACON, - - NL80211_CMD_GET_STATION, - NL80211_CMD_SET_STATION, - NL80211_CMD_NEW_STATION, - NL80211_CMD_DEL_STATION, - - NL80211_CMD_GET_MPATH, - NL80211_CMD_SET_MPATH, - NL80211_CMD_NEW_MPATH, - NL80211_CMD_DEL_MPATH, - - NL80211_CMD_SET_BSS, - - NL80211_CMD_SET_REG, - NL80211_CMD_REQ_SET_REG, - - NL80211_CMD_GET_MESH_CONFIG, - NL80211_CMD_SET_MESH_CONFIG, - - NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, - - NL80211_CMD_GET_REG, - - NL80211_CMD_GET_SCAN, - NL80211_CMD_TRIGGER_SCAN, - NL80211_CMD_NEW_SCAN_RESULTS, - NL80211_CMD_SCAN_ABORTED, - - NL80211_CMD_REG_CHANGE, - - NL80211_CMD_AUTHENTICATE, - NL80211_CMD_ASSOCIATE, - NL80211_CMD_DEAUTHENTICATE, - NL80211_CMD_DISASSOCIATE, - - NL80211_CMD_MICHAEL_MIC_FAILURE, - - NL80211_CMD_REG_BEACON_HINT, - - NL80211_CMD_JOIN_IBSS, - NL80211_CMD_LEAVE_IBSS, - - NL80211_CMD_TESTMODE, - - NL80211_CMD_CONNECT, - NL80211_CMD_ROAM, - NL80211_CMD_DISCONNECT, - - NL80211_CMD_SET_WIPHY_NETNS, - - NL80211_CMD_GET_SURVEY, - NL80211_CMD_NEW_SURVEY_RESULTS, - - NL80211_CMD_SET_PMKSA, - NL80211_CMD_DEL_PMKSA, - NL80211_CMD_FLUSH_PMKSA, - - NL80211_CMD_REMAIN_ON_CHANNEL, - NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, - - NL80211_CMD_SET_TX_BITRATE_MASK, - - NL80211_CMD_REGISTER_FRAME, - NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, - NL80211_CMD_FRAME, - NL80211_CMD_ACTION = NL80211_CMD_FRAME, - NL80211_CMD_FRAME_TX_STATUS, - NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, - - NL80211_CMD_SET_POWER_SAVE, - NL80211_CMD_GET_POWER_SAVE, - - NL80211_CMD_SET_CQM, - NL80211_CMD_NOTIFY_CQM, - - NL80211_CMD_SET_CHANNEL, - NL80211_CMD_SET_WDS_PEER, - - NL80211_CMD_FRAME_WAIT_CANCEL, - - NL80211_CMD_JOIN_MESH, - NL80211_CMD_LEAVE_MESH, - - NL80211_CMD_UNPROT_DEAUTHENTICATE, - NL80211_CMD_UNPROT_DISASSOCIATE, - - NL80211_CMD_NEW_PEER_CANDIDATE, - - NL80211_CMD_GET_WOWLAN, - NL80211_CMD_SET_WOWLAN, - - NL80211_CMD_START_SCHED_SCAN, - NL80211_CMD_STOP_SCHED_SCAN, - NL80211_CMD_SCHED_SCAN_RESULTS, - NL80211_CMD_SCHED_SCAN_STOPPED, - - NL80211_CMD_SET_REKEY_OFFLOAD, - - NL80211_CMD_PMKSA_CANDIDATE, - - NL80211_CMD_TDLS_OPER, - NL80211_CMD_TDLS_MGMT, - - NL80211_CMD_UNEXPECTED_FRAME, - - NL80211_CMD_PROBE_CLIENT, - - NL80211_CMD_REGISTER_BEACONS, - - NL80211_CMD_UNEXPECTED_4ADDR_FRAME, - - NL80211_CMD_SET_NOACK_MAP, - - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ - __NL80211_CMD_AFTER_LAST, - NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 -}; - -/* - * Allow user space programs to use #ifdef on new commands by defining them - * here - */ -#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS -#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE -#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE -#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE -#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE -#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE -#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE -#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT - -#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS - -/* source-level API compatibility */ -#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG -#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG -#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE - -/** - * enum nl80211_attrs - nl80211 netlink attributes - * - * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors - * - * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. - * /sys/class/ieee80211//index - * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) - * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): - * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including - * this attribute) - * NL80211_CHAN_HT20 = HT20 only - * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel - * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel - * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is - * less than or equal to the RTS threshold; allowed range: 1..255; - * dot11ShortRetryLimit; u8 - * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is - * greater than the RTS threshold; allowed range: 1..255; - * dot11ShortLongLimit; u8 - * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum - * length in octets for frames; allowed range: 256..8000, disable - * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 - * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length - * larger than or equal to this use RTS/CTS handshake); allowed range: - * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 - * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 - * section 7.3.2.9; dot11CoverageClass; u8 - * - * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on - * @NL80211_ATTR_IFNAME: network interface name - * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype - * - * @NL80211_ATTR_MAC: MAC address (various uses) - * - * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of - * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC - * keys - * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) - * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 - * section 7.3.2.25.1, e.g. 0x000FAC04) - * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and - * CCMP keys, each six bytes in little endian - * - * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU - * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing - * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE - * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE - * - * @NL80211_ATTR_STA_AID: Association ID for the station (u16) - * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) - * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by - * IEEE 802.11 7.3.1.6 (u16). - * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported - * rates as defined by IEEE 802.11 7.3.2.2 but without the length - * restriction (at most %NL80211_MAX_SUPP_RATES). - * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station - * to, or the AP interface the station was originally added to to. - * @NL80211_ATTR_STA_INFO: information about a station, part of station info - * given for %NL80211_CMD_GET_STATION, nested attribute containing - * info as possible, see &enum nl80211_sta_info. - * - * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, - * consisting of a nested array. - * - * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. - * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. - * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path - * info given for %NL80211_CMD_GET_MPATH, nested attribute described at - * &enum nl80211_mpath_info. - * - * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_mntr_flags. - * - * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the - * current regulatory domain should be set to or is already set to. - * For example, 'CR', for Costa Rica. This attribute is used by the kernel - * to query the CRDA to retrieve one regulatory domain. This attribute can - * also be used by userspace to query the kernel for the currently set - * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11d country information element to identify a country. - * Users can also simply ask the wireless core to set regulatory domain - * to a specific alpha2. - * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory - * rules. - * - * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) - * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled - * (u8, 0 or 1) - * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled - * (u8, 0 or 1) - * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic - * rates in format defined by IEEE 802.11 7.3.2.2 but without the length - * restriction (at most %NL80211_MAX_SUPP_RATES). - * - * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from - * association request when used with NL80211_CMD_NEW_STATION) - * - * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all - * supported interface types, each a flag attribute with the number - * of the interface mode. - * - * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for - * %NL80211_CMD_SET_MGMT_EXTRA_IE. - * - * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with - * %NL80211_CMD_SET_MGMT_EXTRA_IE). - * - * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with - * a single scan request, a wiphy attribute. - * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can - * scan with a single scheduled scan request, a wiphy attribute. - * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements - * that can be added to a scan request - * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information - * elements that can be added to a scheduled scan request - * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be - * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. - * - * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) - * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive - * scanning and include a zero-length SSID (wildcard) for wildcard scan - * @NL80211_ATTR_BSS: scan result BSS - * - * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain - * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* - * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently - * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) - * - * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies - * an array of command numbers (i.e. a mapping index to command number) - * that the driver for the given wiphy supports. - * - * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header - * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and - * NL80211_CMD_ASSOCIATE events - * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) - * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, - * represented as a u32 - * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and - * %NL80211_CMD_DISASSOCIATE, u16 - * - * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as - * a u32 - * - * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _before_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* - * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _after_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* - * - * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported - * cipher suites - * - * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look - * for other networks on different channels - * - * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this - * is used, e.g., with %NL80211_CMD_AUTHENTICATE event - * - * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is - * used for the association (&enum nl80211_mfp, represented as a u32); - * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request - * - * @NL80211_ATTR_STA_FLAGS2: Attribute containing a - * &struct nl80211_sta_flag_update. - * - * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls - * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in - * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE - * request, the driver will assume that the port is unauthorized until - * authorized by user space. Otherwise, port is marked authorized by - * default in station mode. - * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the - * ethertype that will be used for key negotiation. It can be - * specified with the associate and connect commands. If it is not - * specified, the value defaults to 0x888E (PAE, 802.1X). This - * attribute is also used as a flag in the wiphy information to - * indicate that protocols other than PAE are supported. - * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom - * ethertype frames used for key negotiation must not be encrypted. - * - * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. - * We recommend using nested, driver-specific attributes within this. - * - * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT - * event was due to the AP disconnecting the station, and not due to - * a local disconnect request. - * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT - * event (u16) - * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. This is also used with NEW_BEACON to - * indicate that the BSS is to use protection. - * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON - * to indicate which unicast key ciphers will be used with the connection - * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which group key cipher will be used with the connection (a - * u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which WPA version(s) the AP we want to associate with is using - * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which key management algorithm(s) to use (an array of u32). - * - * @NL80211_ATTR_REQ_IE: (Re)association request information elements as - * sent out by the card, for ROAM and successful CONNECT events. - * @NL80211_ATTR_RESP_IE: (Re)association response information elements as - * sent by peer, for ROAM and successful CONNECT events. - * - * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE - * commands to specify using a reassociate frame - * - * @NL80211_ATTR_KEY: key information in a nested attribute with - * %NL80211_KEY_* sub-attributes - * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() - * and join_ibss(), key information is in a nested attribute each - * with %NL80211_KEY_* sub-attributes - * - * @NL80211_ATTR_PID: Process ID of a network namespace. - * - * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for - * dumps. This number increases whenever the object list being - * dumped changes, and as such userspace can verify that it has - * obtained a complete and consistent snapshot by verifying that - * all dump messages contain the same generation number. If it - * changed then the list changed and the dump should be repeated - * completely from scratch. - * - * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface - * - * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of - * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute - * containing info as possible, see &enum survey_info. - * - * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. - * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can - * cache, a wiphy attribute. - * - * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. - * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that - * specifies the maximum duration that can be requested with the - * remain-on-channel operation, in milliseconds, u32. - * - * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. - * - * @NL80211_ATTR_TX_RATES: Nested set of attributes - * (enum nl80211_tx_rate_attributes) describing TX rates per band. The - * enum nl80211_band value is used as the index (nla_type() of the nested - * data. If a band is not included, it will be configured to allow all - * rates based on negotiated supported rates information. This attribute - * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. - * - * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain - * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. - * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the - * @NL80211_CMD_REGISTER_FRAME command. - * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a - * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing - * information about which frame types can be transmitted with - * %NL80211_CMD_FRAME. - * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a - * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing - * information about which frame types can be registered for RX. - * - * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was - * acknowledged by the recipient. - * - * @NL80211_ATTR_CQM: connection quality monitor configuration in a - * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. - * - * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command - * is requesting a local authentication/association state change without - * invoking actual management frame exchange. This can be used with - * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, - * NL80211_CMD_DISASSOCIATE. - * - * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations - * connected to this BSS. - * - * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See - * &enum nl80211_tx_power_setting for possible values. - * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. - * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING - * for non-automatic settings. - * - * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly - * means support for per-station GTKs. - * - * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. - * This can be used to mask out antennas which are not attached or should - * not be used for transmitting. If an antenna is not selected in this - * bitmap the hardware is not allowed to transmit on this antenna. - * - * Each bit represents one antenna, starting with antenna 1 at the first - * bit. Depending on which antennas are selected in the bitmap, 802.11n - * drivers can derive which chainmasks to use (if all antennas belonging to - * a particular chain are disabled this chain should be disabled) and if - * a chain has diversity antennas wether diversity should be used or not. - * HT capabilities (STBC, TX Beamforming, Antenna selection) can be - * derived from the available chains after applying the antenna mask. - * Non-802.11n drivers can derive wether to use diversity or not. - * Drivers may reject configurations or RX/TX mask combinations they cannot - * support by returning -EINVAL. - * - * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. - * This can be used to mask out antennas which are not attached or should - * not be used for receiving. If an antenna is not selected in this bitmap - * the hardware should not be configured to receive on this antenna. - * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. - * - * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available - * for configuration as TX antennas via the above parameters. - * - * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available - * for configuration as RX antennas via the above parameters. - * - * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS - * - * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be - * transmitted on another channel when the channel given doesn't match - * the current channel. If the current channel doesn't match and this - * flag isn't set, the frame will be rejected. This is also used as an - * nl80211 capability flag. - * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) - * - * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags - * attributes, specifying what a key should be set as default as. - * See &enum nl80211_key_default_types. - * - * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be - * changed once the mesh is active. - * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute - * containing attributes from &enum nl80211_meshconf_params. - * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver - * allows auth frames in a mesh to be passed to userspace for processing via - * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. - * - * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy - * capabilities, the supported WoWLAN triggers - * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to - * indicate which WoW triggers should be enabled. This is also - * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN - * triggers. - - * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan - * cycles, in msecs. - - * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more - * sets of attributes to match during scheduled scans. Only BSSs - * that match any of the sets will be reported. These are - * pass-thru filter rules. - * For a match to succeed, the BSS must match all attributes of a - * set. Since not every hardware supports matching all types of - * attributes, there is no guarantee that the reported BSSs are - * fully complying with the match sets and userspace needs to be - * able to ignore them by itself. - * Thus, the implementation is somewhat hardware-dependent, but - * this is only an optimization and the userspace application - * needs to handle all the non-filtered results anyway. - * If the match attributes don't make sense when combined with - * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID - * is included in the probe request, but the match attributes - * will never let it go through), -EINVAL may be returned. - * If ommited, no filtering is done. - * - * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported - * interface combinations. In each nested item, it contains attributes - * defined in &enum nl80211_if_combination_attrs. - * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like - * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that - * are managed in software: interfaces of these types aren't subject to - * any restrictions in their number or combinations. - * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information - * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. - * - * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, - * nested array attribute containing an entry for each band, with the entry - * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but - * without the length restriction (at most %NL80211_MAX_SUPP_RATES). - * - * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon - * and Probe Response (when response to wildcard Probe Request); see - * &enum nl80211_hidden_ssid, represented as a u32 - * - * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. - * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to - * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the - * driver (or firmware) replies to Probe Request frames. - * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association - * Response frames. This is used with %NL80211_CMD_NEW_BEACON and - * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into - * (Re)Association Response frames when the driver (or firmware) replies to - * (Re)Association Request frames. - * - * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration - * of the station, see &enum nl80211_sta_wme_attr. - * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working - * as AP. - * - * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of - * roaming to another AP in the same ESS if the signal lever is low. - * - * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching - * candidate information, see &enum nl80211_pmksa_candidate_attr. - * - * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not - * for management frames transmission. In order to avoid p2p probe/action - * frames are being transmitted at CCK rate in 2GHz band, the user space - * applications use this attribute. - * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and - * %NL80211_CMD_FRAME commands. - * - * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup - * request, link setup confirm, link teardown, etc.). Values are - * described in the TDLS (802.11z) specification. - * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a - * TDLS conversation between two devices. - * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see - * &enum nl80211_tdls_operation, represented as a u8. - * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate - * as a TDLS peer sta. - * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown - * procedures should be performed by sending TDLS packets via - * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be - * used for asking the driver to perform a TDLS operation. - * - * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices - * that have AP support to indicate that they have the AP SME integrated - * with support for the features listed in this attribute, see - * &enum nl80211_ap_sme_features. - * - * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells - * the driver to not wait for an acknowledgement. Note that due to this, - * it will also not give a status callback nor return a cookie. This is - * mostly useful for probe responses to save airtime. - * - * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from - * &enum nl80211_feature_flags and is advertised in wiphy information. - * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * - * requests while operating in AP-mode. - * This attribute holds a bitmap of the supported protocols for - * offloading (see &enum nl80211_probe_resp_offload_support_attr). - * - * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire - * probe-response frame. The DA field in the 802.11 header is zero-ed out, - * to be filled by the FW. - * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable - * this feature. Currently, only supported in mac80211 drivers. - * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the - * ATTR_HT_CAPABILITY to which attention should be paid. - * Currently, only mac80211 NICs support this feature. - * The values that may be configured are: - * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 - * AMPDU density and AMPDU factor. - * All values are treated as suggestions and may be ignored - * by the driver as required. The actual values may be seen in - * the station debugfs ht_caps file. - * - * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country - * abides to when initiating radiation on DFS channels. A country maps - * to one DFS region. - * - * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of - * up to 16 TIDs. - * - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use - */ -enum nl80211_attrs { -/* don't change the order or add anything between, this is ABI! */ - NL80211_ATTR_UNSPEC, - - NL80211_ATTR_WIPHY, - NL80211_ATTR_WIPHY_NAME, - - NL80211_ATTR_IFINDEX, - NL80211_ATTR_IFNAME, - NL80211_ATTR_IFTYPE, - - NL80211_ATTR_MAC, - - NL80211_ATTR_KEY_DATA, - NL80211_ATTR_KEY_IDX, - NL80211_ATTR_KEY_CIPHER, - NL80211_ATTR_KEY_SEQ, - NL80211_ATTR_KEY_DEFAULT, - - NL80211_ATTR_BEACON_INTERVAL, - NL80211_ATTR_DTIM_PERIOD, - NL80211_ATTR_BEACON_HEAD, - NL80211_ATTR_BEACON_TAIL, - - NL80211_ATTR_STA_AID, - NL80211_ATTR_STA_FLAGS, - NL80211_ATTR_STA_LISTEN_INTERVAL, - NL80211_ATTR_STA_SUPPORTED_RATES, - NL80211_ATTR_STA_VLAN, - NL80211_ATTR_STA_INFO, - - NL80211_ATTR_WIPHY_BANDS, - - NL80211_ATTR_MNTR_FLAGS, - - NL80211_ATTR_MESH_ID, - NL80211_ATTR_STA_PLINK_ACTION, - NL80211_ATTR_MPATH_NEXT_HOP, - NL80211_ATTR_MPATH_INFO, - - NL80211_ATTR_BSS_CTS_PROT, - NL80211_ATTR_BSS_SHORT_PREAMBLE, - NL80211_ATTR_BSS_SHORT_SLOT_TIME, - - NL80211_ATTR_HT_CAPABILITY, - - NL80211_ATTR_SUPPORTED_IFTYPES, - - NL80211_ATTR_REG_ALPHA2, - NL80211_ATTR_REG_RULES, - - NL80211_ATTR_MESH_CONFIG, - - NL80211_ATTR_BSS_BASIC_RATES, - - NL80211_ATTR_WIPHY_TXQ_PARAMS, - NL80211_ATTR_WIPHY_FREQ, - NL80211_ATTR_WIPHY_CHANNEL_TYPE, - - NL80211_ATTR_KEY_DEFAULT_MGMT, - - NL80211_ATTR_MGMT_SUBTYPE, - NL80211_ATTR_IE, - - NL80211_ATTR_MAX_NUM_SCAN_SSIDS, - - NL80211_ATTR_SCAN_FREQUENCIES, - NL80211_ATTR_SCAN_SSIDS, - NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ - NL80211_ATTR_BSS, - - NL80211_ATTR_REG_INITIATOR, - NL80211_ATTR_REG_TYPE, - - NL80211_ATTR_SUPPORTED_COMMANDS, - - NL80211_ATTR_FRAME, - NL80211_ATTR_SSID, - NL80211_ATTR_AUTH_TYPE, - NL80211_ATTR_REASON_CODE, - - NL80211_ATTR_KEY_TYPE, - - NL80211_ATTR_MAX_SCAN_IE_LEN, - NL80211_ATTR_CIPHER_SUITES, - - NL80211_ATTR_FREQ_BEFORE, - NL80211_ATTR_FREQ_AFTER, - - NL80211_ATTR_FREQ_FIXED, - - - NL80211_ATTR_WIPHY_RETRY_SHORT, - NL80211_ATTR_WIPHY_RETRY_LONG, - NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - NL80211_ATTR_WIPHY_RTS_THRESHOLD, - - NL80211_ATTR_TIMED_OUT, - - NL80211_ATTR_USE_MFP, - - NL80211_ATTR_STA_FLAGS2, - - NL80211_ATTR_CONTROL_PORT, - - NL80211_ATTR_TESTDATA, - - NL80211_ATTR_PRIVACY, - - NL80211_ATTR_DISCONNECTED_BY_AP, - NL80211_ATTR_STATUS_CODE, - - NL80211_ATTR_CIPHER_SUITES_PAIRWISE, - NL80211_ATTR_CIPHER_SUITE_GROUP, - NL80211_ATTR_WPA_VERSIONS, - NL80211_ATTR_AKM_SUITES, - - NL80211_ATTR_REQ_IE, - NL80211_ATTR_RESP_IE, - - NL80211_ATTR_PREV_BSSID, - - NL80211_ATTR_KEY, - NL80211_ATTR_KEYS, - - NL80211_ATTR_PID, - - NL80211_ATTR_4ADDR, - - NL80211_ATTR_SURVEY_INFO, - - NL80211_ATTR_PMKID, - NL80211_ATTR_MAX_NUM_PMKIDS, - - NL80211_ATTR_DURATION, - - NL80211_ATTR_COOKIE, - - NL80211_ATTR_WIPHY_COVERAGE_CLASS, - - NL80211_ATTR_TX_RATES, - - NL80211_ATTR_FRAME_MATCH, - - NL80211_ATTR_ACK, - - NL80211_ATTR_PS_STATE, - - NL80211_ATTR_CQM, - - NL80211_ATTR_LOCAL_STATE_CHANGE, - - NL80211_ATTR_AP_ISOLATE, - - NL80211_ATTR_WIPHY_TX_POWER_SETTING, - NL80211_ATTR_WIPHY_TX_POWER_LEVEL, - - NL80211_ATTR_TX_FRAME_TYPES, - NL80211_ATTR_RX_FRAME_TYPES, - NL80211_ATTR_FRAME_TYPE, - - NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, - - NL80211_ATTR_SUPPORT_IBSS_RSN, - - NL80211_ATTR_WIPHY_ANTENNA_TX, - NL80211_ATTR_WIPHY_ANTENNA_RX, - - NL80211_ATTR_MCAST_RATE, - - NL80211_ATTR_OFFCHANNEL_TX_OK, - - NL80211_ATTR_BSS_HT_OPMODE, - - NL80211_ATTR_KEY_DEFAULT_TYPES, - - NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, - - NL80211_ATTR_MESH_SETUP, - - NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, - NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, - - NL80211_ATTR_SUPPORT_MESH_AUTH, - NL80211_ATTR_STA_PLINK_STATE, - - NL80211_ATTR_WOWLAN_TRIGGERS, - NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, - - NL80211_ATTR_SCHED_SCAN_INTERVAL, - - NL80211_ATTR_INTERFACE_COMBINATIONS, - NL80211_ATTR_SOFTWARE_IFTYPES, - - NL80211_ATTR_REKEY_DATA, - - NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, - NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, - - NL80211_ATTR_SCAN_SUPP_RATES, - - NL80211_ATTR_HIDDEN_SSID, - - NL80211_ATTR_IE_PROBE_RESP, - NL80211_ATTR_IE_ASSOC_RESP, - - NL80211_ATTR_STA_WME, - NL80211_ATTR_SUPPORT_AP_UAPSD, - - NL80211_ATTR_ROAM_SUPPORT, - - NL80211_ATTR_SCHED_SCAN_MATCH, - NL80211_ATTR_MAX_MATCH_SETS, - - NL80211_ATTR_PMKSA_CANDIDATE, - - NL80211_ATTR_TX_NO_CCK_RATE, - - NL80211_ATTR_TDLS_ACTION, - NL80211_ATTR_TDLS_DIALOG_TOKEN, - NL80211_ATTR_TDLS_OPERATION, - NL80211_ATTR_TDLS_SUPPORT, - NL80211_ATTR_TDLS_EXTERNAL_SETUP, - - NL80211_ATTR_DEVICE_AP_SME, - - NL80211_ATTR_DONT_WAIT_FOR_ACK, - - NL80211_ATTR_FEATURE_FLAGS, - - NL80211_ATTR_PROBE_RESP_OFFLOAD, - - NL80211_ATTR_PROBE_RESP, - - NL80211_ATTR_DFS_REGION, - - NL80211_ATTR_DISABLE_HT, - NL80211_ATTR_HT_CAPABILITY_MASK, - - NL80211_ATTR_NOACK_MAP, - - /* add attributes here, update the policy in nl80211.c */ - - __NL80211_ATTR_AFTER_LAST, - NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 -}; - -/* source-level API compatibility */ -#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION -#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG - -/* - * Allow user space programs to use #ifdef on new attributes by defining them - * here - */ -#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT -#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY -#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES -#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS -#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ -#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE -#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE -#define NL80211_ATTR_IE NL80211_ATTR_IE -#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR -#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE -#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME -#define NL80211_ATTR_SSID NL80211_ATTR_SSID -#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE -#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE -#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE -#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP -#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS -#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES -#define NL80211_ATTR_KEY NL80211_ATTR_KEY -#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS -#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS - -#define NL80211_MAX_SUPP_RATES 32 -#define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 32 -#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 -#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 -#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 -#define NL80211_HT_CAPABILITY_LEN 26 - -#define NL80211_MAX_NR_CIPHER_SUITES 5 -#define NL80211_MAX_NR_AKM_SUITES 2 - -/** - * enum nl80211_iftype - (virtual) interface types - * - * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides - * @NL80211_IFTYPE_ADHOC: independent BSS member - * @NL80211_IFTYPE_STATION: managed BSS member - * @NL80211_IFTYPE_AP: access point - * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces - * are a bit special in that they must always be tied to a pre-existing - * AP type interface. - * @NL80211_IFTYPE_WDS: wireless distribution interface - * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames - * @NL80211_IFTYPE_MESH_POINT: mesh point - * @NL80211_IFTYPE_P2P_CLIENT: P2P client - * @NL80211_IFTYPE_P2P_GO: P2P group owner - * @NL80211_IFTYPE_MAX: highest interface type number currently defined - * @NUM_NL80211_IFTYPES: number of defined interface types - * - * These values are used with the %NL80211_ATTR_IFTYPE - * to set the type of an interface. - * - */ -enum nl80211_iftype { - NL80211_IFTYPE_UNSPECIFIED, - NL80211_IFTYPE_ADHOC, - NL80211_IFTYPE_STATION, - NL80211_IFTYPE_AP, - NL80211_IFTYPE_AP_VLAN, - NL80211_IFTYPE_WDS, - NL80211_IFTYPE_MONITOR, - NL80211_IFTYPE_MESH_POINT, - NL80211_IFTYPE_P2P_CLIENT, - NL80211_IFTYPE_P2P_GO, - - /* keep last */ - NUM_NL80211_IFTYPES, - NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 -}; - -/** - * enum nl80211_sta_flags - station flags - * - * Station flags. When a station is added to an AP interface, it is - * assumed to be already associated (and hence authenticated.) - * - * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved - * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) - * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames - * with short barker preamble - * @NL80211_STA_FLAG_WME: station is WME/QoS capable - * @NL80211_STA_FLAG_MFP: station uses management frame protection - * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated - * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should - * only be used in managed mode (even in the flags mask). Note that the - * flag can't be changed, it is only valid while adding a station, and - * attempts to change it will silently be ignored (rather than rejected - * as errors.) - * @NL80211_STA_FLAG_MAX: highest station flag number currently defined - * @__NL80211_STA_FLAG_AFTER_LAST: internal use - */ -enum nl80211_sta_flags { - __NL80211_STA_FLAG_INVALID, - NL80211_STA_FLAG_AUTHORIZED, - NL80211_STA_FLAG_SHORT_PREAMBLE, - NL80211_STA_FLAG_WME, - NL80211_STA_FLAG_MFP, - NL80211_STA_FLAG_AUTHENTICATED, - NL80211_STA_FLAG_TDLS_PEER, - - /* keep last */ - __NL80211_STA_FLAG_AFTER_LAST, - NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 -}; - -/** - * struct nl80211_sta_flag_update - station flags mask/set - * @mask: mask of station flags to set - * @set: which values to set them to - * - * Both mask and set contain bits as per &enum nl80211_sta_flags. - */ -struct nl80211_sta_flag_update { - __u32 mask; - __u32 set; -} __attribute__((packed)); - -/** - * enum nl80211_rate_info - bitrate information - * - * These attribute types are used with %NL80211_STA_INFO_TXRATE - * when getting information about the bitrate of a station. - * - * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved - * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) - * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate - * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval - * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined - * @__NL80211_RATE_INFO_AFTER_LAST: internal use - */ -enum nl80211_rate_info { - __NL80211_RATE_INFO_INVALID, - NL80211_RATE_INFO_BITRATE, - NL80211_RATE_INFO_MCS, - NL80211_RATE_INFO_40_MHZ_WIDTH, - NL80211_RATE_INFO_SHORT_GI, - - /* keep last */ - __NL80211_RATE_INFO_AFTER_LAST, - NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sta_bss_param - BSS information collected by STA - * - * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM - * when getting information about the bitrate of a station. - * - * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved - * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) - * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled - * (flag) - * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled - * (flag) - * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) - * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) - * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined - * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use - */ -enum nl80211_sta_bss_param { - __NL80211_STA_BSS_PARAM_INVALID, - NL80211_STA_BSS_PARAM_CTS_PROT, - NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, - NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, - NL80211_STA_BSS_PARAM_DTIM_PERIOD, - NL80211_STA_BSS_PARAM_BEACON_INTERVAL, - - /* keep last */ - __NL80211_STA_BSS_PARAM_AFTER_LAST, - NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sta_info - station information - * - * These attribute types are used with %NL80211_ATTR_STA_INFO - * when getting information about a station. - * - * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved - * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) - * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) - * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) - * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) - * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info - * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) - * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this - * station) - * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) - * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) - * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) - * @NL80211_STA_INFO_LLID: the station's mesh LLID - * @NL80211_STA_INFO_PLID: the station's mesh PLID - * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station - * (see %enum nl80211_plink_state) - * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested - * attribute, like NL80211_STA_INFO_TX_BITRATE. - * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute - * containing info as possible, see &enum nl80211_sta_bss_param - * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected - * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. - * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) - * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU - * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average - * @__NL80211_STA_INFO_AFTER_LAST: internal - * @NL80211_STA_INFO_MAX: highest possible station info attribute - */ -enum nl80211_sta_info { - __NL80211_STA_INFO_INVALID, - NL80211_STA_INFO_INACTIVE_TIME, - NL80211_STA_INFO_RX_BYTES, - NL80211_STA_INFO_TX_BYTES, - NL80211_STA_INFO_LLID, - NL80211_STA_INFO_PLID, - NL80211_STA_INFO_PLINK_STATE, - NL80211_STA_INFO_SIGNAL, - NL80211_STA_INFO_TX_BITRATE, - NL80211_STA_INFO_RX_PACKETS, - NL80211_STA_INFO_TX_PACKETS, - NL80211_STA_INFO_TX_RETRIES, - NL80211_STA_INFO_TX_FAILED, - NL80211_STA_INFO_SIGNAL_AVG, - NL80211_STA_INFO_RX_BITRATE, - NL80211_STA_INFO_BSS_PARAM, - NL80211_STA_INFO_CONNECTED_TIME, - NL80211_STA_INFO_STA_FLAGS, - NL80211_STA_INFO_BEACON_LOSS, - NL80211_STA_INFO_CHAIN_SIGNAL, - NL80211_STA_INFO_CHAIN_SIGNAL_AVG, - - /* keep last */ - __NL80211_STA_INFO_AFTER_LAST, - NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mpath_flags - nl80211 mesh path flags - * - * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active - * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running - * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN - * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set - * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded - */ -enum nl80211_mpath_flags { - NL80211_MPATH_FLAG_ACTIVE = 1<<0, - NL80211_MPATH_FLAG_RESOLVING = 1<<1, - NL80211_MPATH_FLAG_SN_VALID = 1<<2, - NL80211_MPATH_FLAG_FIXED = 1<<3, - NL80211_MPATH_FLAG_RESOLVED = 1<<4, -}; - -/** - * enum nl80211_mpath_info - mesh path information - * - * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting - * information about a mesh path. - * - * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved - * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination - * @NL80211_MPATH_INFO_SN: destination sequence number - * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path - * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now - * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in - * &enum nl80211_mpath_flags; - * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec - * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries - * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number - * currently defind - * @__NL80211_MPATH_INFO_AFTER_LAST: internal use - */ -enum nl80211_mpath_info { - __NL80211_MPATH_INFO_INVALID, - NL80211_MPATH_INFO_FRAME_QLEN, - NL80211_MPATH_INFO_SN, - NL80211_MPATH_INFO_METRIC, - NL80211_MPATH_INFO_EXPTIME, - NL80211_MPATH_INFO_FLAGS, - NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, - NL80211_MPATH_INFO_DISCOVERY_RETRIES, - - /* keep last */ - __NL80211_MPATH_INFO_AFTER_LAST, - NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_band_attr - band attributes - * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, - * an array of nested frequency attributes - * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, - * an array of nested bitrate attributes - * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as - * defined in 802.11n - * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE - * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n - * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n - * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined - * @__NL80211_BAND_ATTR_AFTER_LAST: internal use - */ -enum nl80211_band_attr { - __NL80211_BAND_ATTR_INVALID, - NL80211_BAND_ATTR_FREQS, - NL80211_BAND_ATTR_RATES, - - NL80211_BAND_ATTR_HT_MCS_SET, - NL80211_BAND_ATTR_HT_CAPA, - NL80211_BAND_ATTR_HT_AMPDU_FACTOR, - NL80211_BAND_ATTR_HT_AMPDU_DENSITY, - - /* keep last */ - __NL80211_BAND_ATTR_AFTER_LAST, - NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 -}; - -#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA - -/** - * enum nl80211_frequency_attr - frequency attributes - * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz - * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current - * regulatory domain. - * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is - * permitted on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted - * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory - * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm - * (100 * dBm). - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use - */ -enum nl80211_frequency_attr { - __NL80211_FREQUENCY_ATTR_INVALID, - NL80211_FREQUENCY_ATTR_FREQ, - NL80211_FREQUENCY_ATTR_DISABLED, - NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, - NL80211_FREQUENCY_ATTR_NO_IBSS, - NL80211_FREQUENCY_ATTR_RADAR, - NL80211_FREQUENCY_ATTR_MAX_TX_POWER, - - /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, - NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 -}; - -#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER - -/** - * enum nl80211_bitrate_attr - bitrate attributes - * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps - * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported - * in 2.4 GHz band. - * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number - * currently defined - * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use - */ -enum nl80211_bitrate_attr { - __NL80211_BITRATE_ATTR_INVALID, - NL80211_BITRATE_ATTR_RATE, - NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, - - /* keep last */ - __NL80211_BITRATE_ATTR_AFTER_LAST, - NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_initiator - Indicates the initiator of a reg domain request - * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world - * regulatory domain. - * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the - * regulatory domain. - * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the - * wireless core it thinks its knows the regulatory domain we should be in. - * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an - * 802.11 country information element with regulatory information it - * thinks we should consider. cfg80211 only processes the country - * code from the IE, and relies on the regulatory domain information - * structure passed by userspace (CRDA) from our wireless-regdb. - * If a channel is enabled but the country code indicates it should - * be disabled we disable the channel and re-enable it upon disassociation. - */ -enum nl80211_reg_initiator { - NL80211_REGDOM_SET_BY_CORE, - NL80211_REGDOM_SET_BY_USER, - NL80211_REGDOM_SET_BY_DRIVER, - NL80211_REGDOM_SET_BY_COUNTRY_IE, -}; - -/** - * enum nl80211_reg_type - specifies the type of regulatory domain - * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains - * to a specific country. When this is set you can count on the - * ISO / IEC 3166 alpha2 country code being valid. - * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory - * domain. - * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom - * driver specific world regulatory domain. These do not apply system-wide - * and are only applicable to the individual devices which have requested - * them to be applied. - * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product - * of an intersection between two regulatory domains -- the previously - * set regulatory domain on the system and the last accepted regulatory - * domain request to be processed. - */ -enum nl80211_reg_type { - NL80211_REGDOM_TYPE_COUNTRY, - NL80211_REGDOM_TYPE_WORLD, - NL80211_REGDOM_TYPE_CUSTOM_WORLD, - NL80211_REGDOM_TYPE_INTERSECTION, -}; - -/** - * enum nl80211_reg_rule_attr - regulatory rule attributes - * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional - * considerations for a given frequency range. These are the - * &enum nl80211_reg_rule_flags. - * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory - * rule in KHz. This is not a center of frequency but an actual regulatory - * band edge. - * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. - * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. - * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. - * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). - * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number - * currently defined - * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use - */ -enum nl80211_reg_rule_attr { - __NL80211_REG_RULE_ATTR_INVALID, - NL80211_ATTR_REG_RULE_FLAGS, - - NL80211_ATTR_FREQ_RANGE_START, - NL80211_ATTR_FREQ_RANGE_END, - NL80211_ATTR_FREQ_RANGE_MAX_BW, - - NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, - NL80211_ATTR_POWER_RULE_MAX_EIRP, - - /* keep last */ - __NL80211_REG_RULE_ATTR_AFTER_LAST, - NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sched_scan_match_attr - scheduled scan match attributes - * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. - * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter - * attribute number currently defined - * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use - */ -enum nl80211_sched_scan_match_attr { - __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, - - /* keep last */ - __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, - NL80211_SCHED_SCAN_MATCH_ATTR_MAX = - __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_reg_rule_flags - regulatory rule flags - * - * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed - * @NL80211_RRF_NO_CCK: CCK modulation not allowed - * @NL80211_RRF_NO_INDOOR: indoor operation not allowed - * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed - * @NL80211_RRF_DFS: DFS support is required to be used - * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links - * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links - * @NL80211_RRF_PASSIVE_SCAN: passive scan is required - * @NL80211_RRF_NO_IBSS: no IBSS is allowed - */ -enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_PASSIVE_SCAN = 1<<7, - NL80211_RRF_NO_IBSS = 1<<8, -}; - -/** - * enum nl80211_dfs_regions - regulatory DFS regions - * - * @NL80211_DFS_UNSET: Country has no DFS master region specified - * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC - * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI - * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec - */ -enum nl80211_dfs_regions { - NL80211_DFS_UNSET = 0, - NL80211_DFS_FCC = 1, - NL80211_DFS_ETSI = 2, - NL80211_DFS_JP = 3, -}; - -/** - * enum nl80211_survey_info - survey information - * - * These attribute types are used with %NL80211_ATTR_SURVEY_INFO - * when getting information about a survey. - * - * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved - * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel - * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) - * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used - * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio - * spent on this channel - * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary - * channel was sensed busy (either due to activity or energy detect) - * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension - * channel was sensed busy - * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent - * receiving data - * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent - * transmitting data - * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number - * currently defined - * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use - */ -enum nl80211_survey_info { - __NL80211_SURVEY_INFO_INVALID, - NL80211_SURVEY_INFO_FREQUENCY, - NL80211_SURVEY_INFO_NOISE, - NL80211_SURVEY_INFO_IN_USE, - NL80211_SURVEY_INFO_CHANNEL_TIME, - NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_RX, - NL80211_SURVEY_INFO_CHANNEL_TIME_TX, - - /* keep last */ - __NL80211_SURVEY_INFO_AFTER_LAST, - NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mntr_flags - monitor configuration flags - * - * Monitor configuration flags. - * - * @__NL80211_MNTR_FLAG_INVALID: reserved - * - * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS - * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP - * @NL80211_MNTR_FLAG_CONTROL: pass control frames - * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. - * - * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use - * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag - */ -enum nl80211_mntr_flags { - __NL80211_MNTR_FLAG_INVALID, - NL80211_MNTR_FLAG_FCSFAIL, - NL80211_MNTR_FLAG_PLCPFAIL, - NL80211_MNTR_FLAG_CONTROL, - NL80211_MNTR_FLAG_OTHER_BSS, - NL80211_MNTR_FLAG_COOK_FRAMES, - - /* keep last */ - __NL80211_MNTR_FLAG_AFTER_LAST, - NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 -}; - -/** - * enum nl80211_meshconf_params - mesh configuration parameters - * - * Mesh configuration parameters. These can be changed while the mesh is - * active. - * - * @__NL80211_MESHCONF_INVALID: internal use - * - * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message - * - * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link - * - * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units - * - * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface - * - * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh - * - * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. - * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. - * - * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) - * - * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) - * - * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) - * - * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) - * - * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element - * - * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh - * - * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not - * - * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. - * - * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. - * - * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. - * - * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. - * - * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute - * - * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use - */ -enum nl80211_meshconf_params { - __NL80211_MESHCONF_INVALID, - NL80211_MESHCONF_RETRY_TIMEOUT, - NL80211_MESHCONF_CONFIRM_TIMEOUT, - NL80211_MESHCONF_HOLDING_TIMEOUT, - NL80211_MESHCONF_MAX_PEER_LINKS, - NL80211_MESHCONF_MAX_RETRIES, - NL80211_MESHCONF_TTL, - NL80211_MESHCONF_AUTO_OPEN_PLINKS, - NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, - NL80211_MESHCONF_PATH_REFRESH_TIME, - NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, - NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, - NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, - NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, - NL80211_MESHCONF_HWMP_ROOTMODE, - NL80211_MESHCONF_ELEMENT_TTL, - NL80211_MESHCONF_HWMP_RANN_INTERVAL, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, - NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, - NL80211_MESHCONF_FORWARDING, - - /* keep last */ - __NL80211_MESHCONF_ATTR_AFTER_LAST, - NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mesh_setup_params - mesh setup parameters - * - * Mesh setup parameters. These are used to start/join a mesh and cannot be - * changed while the mesh is active. - * - * @__NL80211_MESH_SETUP_INVALID: Internal use - * - * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. - * - * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. - * - * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. - * - * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. - * - * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number - * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use - */ -enum nl80211_mesh_setup_params { - __NL80211_MESH_SETUP_INVALID, - NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, - NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, - NL80211_MESH_SETUP_IE, - NL80211_MESH_SETUP_USERSPACE_AUTH, - NL80211_MESH_SETUP_USERSPACE_AMPE, - - /* keep last */ - __NL80211_MESH_SETUP_ATTR_AFTER_LAST, - NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_txq_attr - TX queue parameter attributes - * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved - * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) - * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning - * disabled - * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form - * 2^n-1 in the range 1..32767] - * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form - * 2^n-1 in the range 1..32767] - * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] - * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal - * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number - */ -enum nl80211_txq_attr { - __NL80211_TXQ_ATTR_INVALID, - NL80211_TXQ_ATTR_QUEUE, - NL80211_TXQ_ATTR_TXOP, - NL80211_TXQ_ATTR_CWMIN, - NL80211_TXQ_ATTR_CWMAX, - NL80211_TXQ_ATTR_AIFS, - - /* keep last */ - __NL80211_TXQ_ATTR_AFTER_LAST, - NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 -}; - -enum nl80211_txq_q { - NL80211_TXQ_Q_VO, - NL80211_TXQ_Q_VI, - NL80211_TXQ_Q_BE, - NL80211_TXQ_Q_BK -}; - -enum nl80211_channel_type { - NL80211_CHAN_NO_HT, - NL80211_CHAN_HT20, - NL80211_CHAN_HT40MINUS, - NL80211_CHAN_HT40PLUS -}; - -/** - * enum nl80211_bss - netlink attributes for a BSS - * - * @__NL80211_BSS_INVALID: invalid - * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) - * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) - * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) - * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) - * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) - * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the - * raw information elements from the probe response/beacon (bin); - * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are - * from a Probe Response frame; otherwise they are from a Beacon frame. - * However, if the driver does not indicate the source of the IEs, these - * IEs may be from either frame subtype. - * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon - * in mBm (100 * dBm) (s32) - * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon - * in unspecified units, scaled to 0..100 (u8) - * @NL80211_BSS_STATUS: status, if this BSS is "used" - * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms - * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information - * elements from a Beacon frame (bin); not present if no Beacon frame has - * yet been received - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -enum nl80211_bss { - __NL80211_BSS_INVALID, - NL80211_BSS_BSSID, - NL80211_BSS_FREQUENCY, - NL80211_BSS_TSF, - NL80211_BSS_BEACON_INTERVAL, - NL80211_BSS_CAPABILITY, - NL80211_BSS_INFORMATION_ELEMENTS, - NL80211_BSS_SIGNAL_MBM, - NL80211_BSS_SIGNAL_UNSPEC, - NL80211_BSS_STATUS, - NL80211_BSS_SEEN_MS_AGO, - NL80211_BSS_BEACON_IES, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, - NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 -}; - -/** - * enum nl80211_bss_status - BSS "status" - * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. - * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. - * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. - * - * The BSS status is a BSS attribute in scan dumps, which - * indicates the status the interface has wrt. this BSS. - */ -enum nl80211_bss_status { - NL80211_BSS_STATUS_AUTHENTICATED, - NL80211_BSS_STATUS_ASSOCIATED, - NL80211_BSS_STATUS_IBSS_JOINED, -}; - -/** - * enum nl80211_auth_type - AuthenticationType - * - * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication - * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) - * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) - * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) - * @__NL80211_AUTHTYPE_NUM: internal - * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm - * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by - * trying multiple times); this is invalid in netlink -- leave out - * the attribute for this on CONNECT commands. - */ -enum nl80211_auth_type { - NL80211_AUTHTYPE_OPEN_SYSTEM, - NL80211_AUTHTYPE_SHARED_KEY, - NL80211_AUTHTYPE_FT, - NL80211_AUTHTYPE_NETWORK_EAP, - - /* keep last */ - __NL80211_AUTHTYPE_NUM, - NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, - NL80211_AUTHTYPE_AUTOMATIC -}; - -/** - * enum nl80211_key_type - Key Type - * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key - * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key - * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) - * @NUM_NL80211_KEYTYPES: number of defined key types - */ -enum nl80211_key_type { - NL80211_KEYTYPE_GROUP, - NL80211_KEYTYPE_PAIRWISE, - NL80211_KEYTYPE_PEERKEY, - - NUM_NL80211_KEYTYPES -}; - -/** - * enum nl80211_mfp - Management frame protection state - * @NL80211_MFP_NO: Management frame protection not used - * @NL80211_MFP_REQUIRED: Management frame protection required - */ -enum nl80211_mfp { - NL80211_MFP_NO, - NL80211_MFP_REQUIRED, -}; - -enum nl80211_wpa_versions { - NL80211_WPA_VERSION_1 = 1 << 0, - NL80211_WPA_VERSION_2 = 1 << 1, -}; - -/** - * enum nl80211_key_default_types - key default types - * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid - * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default - * unicast key - * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default - * multicast key - * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types - */ -enum nl80211_key_default_types { - __NL80211_KEY_DEFAULT_TYPE_INVALID, - NL80211_KEY_DEFAULT_TYPE_UNICAST, - NL80211_KEY_DEFAULT_TYPE_MULTICAST, - - NUM_NL80211_KEY_DEFAULT_TYPES -}; - -/** - * enum nl80211_key_attributes - key attributes - * @__NL80211_KEY_INVALID: invalid - * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of - * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC - * keys - * @NL80211_KEY_IDX: key ID (u8, 0-3) - * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 - * section 7.3.2.25.1, e.g. 0x000FAC04) - * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and - * CCMP keys, each six bytes in little endian - * @NL80211_KEY_DEFAULT: flag indicating default key - * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key - * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not - * specified the default depends on whether a MAC address was - * given with the command using the key or not (u32) - * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags - * attributes, specifying what a key should be set as default as. - * See &enum nl80211_key_default_types. - * @__NL80211_KEY_AFTER_LAST: internal - * @NL80211_KEY_MAX: highest key attribute - */ -enum nl80211_key_attributes { - __NL80211_KEY_INVALID, - NL80211_KEY_DATA, - NL80211_KEY_IDX, - NL80211_KEY_CIPHER, - NL80211_KEY_SEQ, - NL80211_KEY_DEFAULT, - NL80211_KEY_DEFAULT_MGMT, - NL80211_KEY_TYPE, - NL80211_KEY_DEFAULT_TYPES, - - /* keep last */ - __NL80211_KEY_AFTER_LAST, - NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 -}; - -/** - * enum nl80211_tx_rate_attributes - TX rate set attributes - * @__NL80211_TXRATE_INVALID: invalid - * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection - * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with - * 1 = 500 kbps) but without the IE length restriction (at most - * %NL80211_MAX_SUPP_RATES in a single array). - * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection - * in an array of MCS numbers. - * @__NL80211_TXRATE_AFTER_LAST: internal - * @NL80211_TXRATE_MAX: highest TX rate attribute - */ -enum nl80211_tx_rate_attributes { - __NL80211_TXRATE_INVALID, - NL80211_TXRATE_LEGACY, - NL80211_TXRATE_MCS, - - /* keep last */ - __NL80211_TXRATE_AFTER_LAST, - NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 -}; - -/** - * enum nl80211_band - Frequency band - * @NL80211_BAND_2GHZ: 2.4 GHz ISM band - * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) - */ -enum nl80211_band { - NL80211_BAND_2GHZ, - NL80211_BAND_5GHZ, -}; - -enum nl80211_ps_state { - NL80211_PS_DISABLED, - NL80211_PS_ENABLED, -}; - -/** - * enum nl80211_attr_cqm - connection quality monitor attributes - * @__NL80211_ATTR_CQM_INVALID: invalid - * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies - * the threshold for the RSSI level at which an event will be sent. Zero - * to disable. - * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies - * the minimum amount the RSSI level must change after an event before a - * new event may be issued (to reduce effects of RSSI oscillation). - * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event - * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many - * consecutive packets were not acknowledged by the peer - * @__NL80211_ATTR_CQM_AFTER_LAST: internal - * @NL80211_ATTR_CQM_MAX: highest key attribute - */ -enum nl80211_attr_cqm { - __NL80211_ATTR_CQM_INVALID, - NL80211_ATTR_CQM_RSSI_THOLD, - NL80211_ATTR_CQM_RSSI_HYST, - NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, - NL80211_ATTR_CQM_PKT_LOSS_EVENT, - - /* keep last */ - __NL80211_ATTR_CQM_AFTER_LAST, - NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 -}; - -/** - * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the - * configured threshold - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the - * configured threshold - */ -enum nl80211_cqm_rssi_threshold_event { - NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, - NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, -}; - - -/** - * enum nl80211_tx_power_setting - TX power adjustment - * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power - * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter - * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter - */ -enum nl80211_tx_power_setting { - NL80211_TX_POWER_AUTOMATIC, - NL80211_TX_POWER_LIMITED, - NL80211_TX_POWER_FIXED, -}; - -/** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has - * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have - * a bit for each byte in the pattern. The lowest-order bit corresponds - * to the first byte of the pattern, but the bytes of the pattern are - * in a little-endian-like format, i.e. the 9th byte of the pattern - * corresponds to the lowest-order bit in the second byte of the mask. - * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where - * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". - * Note that the pattern matching is done as though frames were not - * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked - * first (including SNAP header unpacking) and then matched. - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number - */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, -}; - -/** - * struct nl80211_wowlan_pattern_support - pattern support information - * @max_patterns: maximum number of patterns supported - * @min_pattern_len: minimum length of each pattern - * @max_pattern_len: maximum length of each pattern - * - * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. - */ -struct nl80211_wowlan_pattern_support { - __u32 max_patterns; - __u32 min_pattern_len; - __u32 max_pattern_len; -} __attribute__((packed)); - -/** - * enum nl80211_wowlan_triggers - WoWLAN trigger definitions - * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes - * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put - * the chip into a special state -- works best with chips that have - * support for low-power operation already (flag) - * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect - * is detected is implementation-specific (flag) - * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed - * by 16 repetitions of MAC addr, anywhere in payload) (flag) - * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns - * which are passed in an array of nested attributes, each nested attribute - * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. - * - * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. - * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be - * used when setting, used only to indicate that GTK rekeying is supported - * by the device (flag) - * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if - * done by the device) (flag) - * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request - * packet (flag) - * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) - * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released - * (on devices that have rfkill in the device) (flag) - * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers - * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number - */ -enum nl80211_wowlan_triggers { - __NL80211_WOWLAN_TRIG_INVALID, - NL80211_WOWLAN_TRIG_ANY, - NL80211_WOWLAN_TRIG_DISCONNECT, - NL80211_WOWLAN_TRIG_MAGIC_PKT, - NL80211_WOWLAN_TRIG_PKT_PATTERN, - NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, - NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, - NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, - NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, - NL80211_WOWLAN_TRIG_RFKILL_RELEASE, - - /* keep last */ - NUM_NL80211_WOWLAN_TRIG, - MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 -}; - -/** - * enum nl80211_iface_limit_attrs - limit attributes - * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) - * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that - * can be chosen from this set of interface types (u32) - * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a - * flag attribute for each interface type in this set - * @NUM_NL80211_IFACE_LIMIT: number of attributes - * @MAX_NL80211_IFACE_LIMIT: highest attribute number - */ -enum nl80211_iface_limit_attrs { - NL80211_IFACE_LIMIT_UNSPEC, - NL80211_IFACE_LIMIT_MAX, - NL80211_IFACE_LIMIT_TYPES, - - /* keep last */ - NUM_NL80211_IFACE_LIMIT, - MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 -}; - -/** - * enum nl80211_if_combination_attrs -- interface combination attributes - * - * @NL80211_IFACE_COMB_UNSPEC: (reserved) - * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits - * for given interface types, see &enum nl80211_iface_limit_attrs. - * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of - * interfaces that can be created in this group. This number doesn't - * apply to interfaces purely managed in software, which are listed - * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. - * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that - * beacon intervals within this group must be all the same even for - * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt - * the infrastructure network's beacon interval. - * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many - * different channels may be used within this group. - * @NUM_NL80211_IFACE_COMB: number of attributes - * @MAX_NL80211_IFACE_COMB: highest attribute number - * - * Examples: - * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 - * => allows an AP and a STA that must match BIs - * - * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 - * => allows 8 of AP/GO - * - * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels - * - * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 - * => allows a STA plus three P2P interfaces - * - * The list of these four possiblities could completely be contained - * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate - * that any of these groups must match. - * - * "Combinations" of just a single interface will not be listed here, - * a single interface of any valid interface type is assumed to always - * be possible by itself. This means that implicitly, for each valid - * interface type, the following group always exists: - * numbers = [ #{} <= 1 ], channels = 1, max = 1 - */ -enum nl80211_if_combination_attrs { - NL80211_IFACE_COMB_UNSPEC, - NL80211_IFACE_COMB_LIMITS, - NL80211_IFACE_COMB_MAXNUM, - NL80211_IFACE_COMB_STA_AP_BI_MATCH, - NL80211_IFACE_COMB_NUM_CHANNELS, - - /* keep last */ - NUM_NL80211_IFACE_COMB, - MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 -}; - - -/** - * enum nl80211_plink_state - state of a mesh peer link finite state machine - * - * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existant mesh peer links - * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to - * this mesh peer - * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received - * from this mesh peer - * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been - * received from this mesh peer - * @NL80211_PLINK_ESTAB: mesh peer link is established - * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled - * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded - * @NUM_NL80211_PLINK_STATES: number of peer link states - * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states - */ -enum nl80211_plink_state { - NL80211_PLINK_LISTEN, - NL80211_PLINK_OPN_SNT, - NL80211_PLINK_OPN_RCVD, - NL80211_PLINK_CNF_RCVD, - NL80211_PLINK_ESTAB, - NL80211_PLINK_HOLDING, - NL80211_PLINK_BLOCKED, - - /* keep last */ - NUM_NL80211_PLINK_STATES, - MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 -}; - -#define NL80211_KCK_LEN 16 -#define NL80211_KEK_LEN 16 -#define NL80211_REPLAY_CTR_LEN 8 - -/** - * enum nl80211_rekey_data - attributes for GTK rekey offload - * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes - * @NL80211_REKEY_DATA_KEK: key encryption key (binary) - * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) - * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) - * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) - * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) - */ -enum nl80211_rekey_data { - __NL80211_REKEY_DATA_INVALID, - NL80211_REKEY_DATA_KEK, - NL80211_REKEY_DATA_KCK, - NL80211_REKEY_DATA_REPLAY_CTR, - - /* keep last */ - NUM_NL80211_REKEY_DATA, - MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 -}; - -/** - * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID - * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in - * Beacon frames) - * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element - * in Beacon frames - * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID - * element in Beacon frames but zero out each byte in the SSID - */ -enum nl80211_hidden_ssid { - NL80211_HIDDEN_SSID_NOT_IN_USE, - NL80211_HIDDEN_SSID_ZERO_LEN, - NL80211_HIDDEN_SSID_ZERO_CONTENTS -}; - -/** - * enum nl80211_sta_wme_attr - station WME attributes - * @__NL80211_STA_WME_INVALID: invalid number for nested attribute - * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format - * is the same as the AC bitmap in the QoS info field. - * @NL80211_STA_WME_MAX_SP: max service period. the format is the same - * as the MAX_SP field in the QoS info field (but already shifted down). - * @__NL80211_STA_WME_AFTER_LAST: internal - * @NL80211_STA_WME_MAX: highest station WME attribute - */ -enum nl80211_sta_wme_attr { - __NL80211_STA_WME_INVALID, - NL80211_STA_WME_UAPSD_QUEUES, - NL80211_STA_WME_MAX_SP, - - /* keep last */ - __NL80211_STA_WME_AFTER_LAST, - NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 -}; - -/** - * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates - * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes - * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher - * priority) - * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) - * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) - * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes - * (internal) - * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute - * (internal) - */ -enum nl80211_pmksa_candidate_attr { - __NL80211_PMKSA_CANDIDATE_INVALID, - NL80211_PMKSA_CANDIDATE_INDEX, - NL80211_PMKSA_CANDIDATE_BSSID, - NL80211_PMKSA_CANDIDATE_PREAUTH, - - /* keep last */ - NUM_NL80211_PMKSA_CANDIDATE, - MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 -}; - -/** - * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION - * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request - * @NL80211_TDLS_SETUP: Setup TDLS link - * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established - * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link - * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link - */ -enum nl80211_tdls_operation { - NL80211_TDLS_DISCOVERY_REQ, - NL80211_TDLS_SETUP, - NL80211_TDLS_TEARDOWN, - NL80211_TDLS_ENABLE_LINK, - NL80211_TDLS_DISABLE_LINK, -}; - -/* - * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. -enum nl80211_ap_sme_features { -}; - */ - -/** - * enum nl80211_feature_flags - device/driver features - * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back - * TX status to the socket error queue when requested with the - * socket option. - * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. - */ -enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, -}; - -/** - * enum nl80211_probe_resp_offload_support_attr - optional supported - * protocols for probe-response offloading by the driver/FW. - * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. - * Each enum value represents a bit in the bitmap of supported - * protocols. Typically a subset of probe-requests belonging to a - * supported protocol will be excluded from offload and uploaded - * to the host. - * - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u - */ -enum nl80211_probe_resp_offload_support_attr { - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, -}; - -#endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iwinfo/src/include/iwinfo/api/wext.h b/package/network/utils/iwinfo/src/include/iwinfo/api/wext.h deleted file mode 100644 index 6b5838e1b8..0000000000 --- a/package/network/utils/iwinfo/src/include/iwinfo/api/wext.h +++ /dev/null @@ -1,1139 +0,0 @@ -/* - * This file define a set of standard wireless extensions - * - * Version : 22 16.3.07 - * - * Authors : Jean Tourrilhes - HPL - - * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. - */ - -#ifndef _LINUX_WIRELESS_H -#define _LINUX_WIRELESS_H - -/************************** DOCUMENTATION **************************/ -/* - * Initial APIs (1996 -> onward) : - * ----------------------------- - * Basically, the wireless extensions are for now a set of standard ioctl - * call + /proc/net/wireless - * - * The entry /proc/net/wireless give statistics and information on the - * driver. - * This is better than having each driver having its entry because - * its centralised and we may remove the driver module safely. - * - * Ioctl are used to configure the driver and issue commands. This is - * better than command line options of insmod because we may want to - * change dynamically (while the driver is running) some parameters. - * - * The ioctl mechanimsm are copied from standard devices ioctl. - * We have the list of command plus a structure descibing the - * data exchanged... - * Note that to add these ioctl, I was obliged to modify : - * # net/core/dev.c (two place + add include) - * # net/ipv4/af_inet.c (one place + add include) - * - * /proc/net/wireless is a copy of /proc/net/dev. - * We have a structure for data passed from the driver to /proc/net/wireless - * Too add this, I've modified : - * # net/core/dev.c (two other places) - * # include/linux/netdevice.h (one place) - * # include/linux/proc_fs.h (one place) - * - * New driver API (2002 -> onward) : - * ------------------------------- - * This file is only concerned with the user space API and common definitions. - * The new driver API is defined and documented in : - * # include/net/iw_handler.h - * - * Note as well that /proc/net/wireless implementation has now moved in : - * # net/core/wireless.c - * - * Wireless Events (2002 -> onward) : - * -------------------------------- - * Events are defined at the end of this file, and implemented in : - * # net/core/wireless.c - * - * Other comments : - * -------------- - * Do not add here things that are redundant with other mechanisms - * (drivers init, ifconfig, /proc/net/dev, ...) and with are not - * wireless specific. - * - * These wireless extensions are not magic : each driver has to provide - * support for them... - * - * IMPORTANT NOTE : As everything in the kernel, this is very much a - * work in progress. Contact me if you have ideas of improvements... - */ - -/***************************** INCLUDES *****************************/ - -/* This header is used in user-space, therefore need to be sanitised - * for that purpose. Those includes are usually not compatible with glibc. - * To know which includes to use in user-space, check iwlib.h. */ -#ifdef __KERNEL__ -#include /* for "caddr_t" et al */ -#include /* for "struct sockaddr" et al */ -#include /* for IFNAMSIZ and co... */ -#endif /* __KERNEL__ */ - -/***************************** VERSION *****************************/ -/* - * This constant is used to know the availability of the wireless - * extensions and to know which version of wireless extensions it is - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ -#define WIRELESS_EXT 22 - -/* - * Changes : - * - * V2 to V3 - * -------- - * Alan Cox start some incompatibles changes. I've integrated a bit more. - * - Encryption renamed to Encode to avoid US regulation problems - * - Frequency changed from float to struct to avoid problems on old 386 - * - * V3 to V4 - * -------- - * - Add sensitivity - * - * V4 to V5 - * -------- - * - Missing encoding definitions in range - * - Access points stuff - * - * V5 to V6 - * -------- - * - 802.11 support (ESSID ioctls) - * - * V6 to V7 - * -------- - * - define IW_ESSID_MAX_SIZE and IW_MAX_AP - * - * V7 to V8 - * -------- - * - Changed my e-mail address - * - More 802.11 support (nickname, rate, rts, frag) - * - List index in frequencies - * - * V8 to V9 - * -------- - * - Support for 'mode of operation' (ad-hoc, managed...) - * - Support for unicast and multicast power saving - * - Change encoding to support larger tokens (>64 bits) - * - Updated iw_params (disable, flags) and use it for NWID - * - Extracted iw_point from iwreq for clarity - * - * V9 to V10 - * --------- - * - Add PM capability to range structure - * - Add PM modifier : MAX/MIN/RELATIVE - * - Add encoding option : IW_ENCODE_NOKEY - * - Add TxPower ioctls (work like TxRate) - * - * V10 to V11 - * ---------- - * - Add WE version in range (help backward/forward compatibility) - * - Add retry ioctls (work like PM) - * - * V11 to V12 - * ---------- - * - Add SIOCSIWSTATS to get /proc/net/wireless programatically - * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space - * - Add new statistics (frag, retry, beacon) - * - Add average quality (for user space calibration) - * - * V12 to V13 - * ---------- - * - Document creation of new driver API. - * - Extract union iwreq_data from struct iwreq (for new driver API). - * - Rename SIOCSIWNAME as SIOCSIWCOMMIT - * - * V13 to V14 - * ---------- - * - Wireless Events support : define struct iw_event - * - Define additional specific event numbers - * - Add "addr" and "param" fields in union iwreq_data - * - AP scanning stuff (SIOCSIWSCAN and friends) - * - * V14 to V15 - * ---------- - * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg - * - Make struct iw_freq signed (both m & e), add explicit padding - * - Add IWEVCUSTOM for driver specific event/scanning token - * - Add IW_MAX_GET_SPY for driver returning a lot of addresses - * - Add IW_TXPOW_RANGE for range of Tx Powers - * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points - * - Add IW_MODE_MONITOR for passive monitor - * - * V15 to V16 - * ---------- - * - Increase the number of bitrates in iw_range to 32 (for 802.11g) - * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) - * - Reshuffle struct iw_range for increases, add filler - * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses - * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support - * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" - * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index - * - * V16 to V17 - * ---------- - * - Add flags to frequency -> auto/fixed - * - Document (struct iw_quality *)->updated, add new flags (INVALID) - * - Wireless Event capability in struct iw_range - * - Add support for relative TxPower (yick !) - * - * V17 to V18 (From Jouni Malinen ) - * ---------- - * - Add support for WPA/WPA2 - * - Add extended encoding configuration (SIOCSIWENCODEEXT and - * SIOCGIWENCODEEXT) - * - Add SIOCSIWGENIE/SIOCGIWGENIE - * - Add SIOCSIWMLME - * - Add SIOCSIWPMKSA - * - Add struct iw_range bit field for supported encoding capabilities - * - Add optional scan request parameters for SIOCSIWSCAN - * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA - * related parameters (extensible up to 4096 parameter values) - * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, - * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND - * - * V18 to V19 - * ---------- - * - Remove (struct iw_point *)->pointer from events and streams - * - Remove header includes to help user space - * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 - * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros - * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM - * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros - * - * V19 to V20 - * ---------- - * - RtNetlink requests support (SET/GET) - * - * V20 to V21 - * ---------- - * - Remove (struct net_device *)->get_wireless_stats() - * - Change length in ESSID and NICK to strlen() instead of strlen()+1 - * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers - * - Power/Retry relative values no longer * 100000 - * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI - * - * V21 to V22 - * ---------- - * - Prevent leaking of kernel space in stream on 64 bits. - */ - -/**************************** CONSTANTS ****************************/ - -/* -------------------------- IOCTL LIST -------------------------- */ - -/* Wireless Identification */ -#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ -#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ -/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. - * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... - * Don't put the name of your driver there, it's useless. */ - -/* Basic operations */ -#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ -#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ -#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ -#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ -#define SIOCSIWMODE 0x8B06 /* set operation mode */ -#define SIOCGIWMODE 0x8B07 /* get operation mode */ -#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ -#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ - -/* Informative stuff */ -#define SIOCSIWRANGE 0x8B0A /* Unused */ -#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ -#define SIOCSIWPRIV 0x8B0C /* Unused */ -#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ -#define SIOCSIWSTATS 0x8B0E /* Unused */ -#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ -/* SIOCGIWSTATS is strictly used between user space and the kernel, and - * is never passed to the driver (i.e. the driver will never see it). */ - -/* Spy support (statistics per MAC address - used for Mobile IP support) */ -#define SIOCSIWSPY 0x8B10 /* set spy addresses */ -#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ -#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ -#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ - -/* Access Point manipulation */ -#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ -#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ -#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ -#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ -#define SIOCGIWSCAN 0x8B19 /* get scanning results */ - -/* 802.11 specific support */ -#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ -#define SIOCGIWESSID 0x8B1B /* get ESSID */ -#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ -#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ -/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit - * within the 'iwreq' structure, so we need to use the 'data' member to - * point to a string in user space, like it is done for RANGE... */ - -/* Other parameters useful in 802.11 and some other devices */ -#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ -#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ -#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ -#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ -#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ -#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ -#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ -#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ -#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ -#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ - -/* Encoding stuff (scrambling, hardware security, WEP...) */ -#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ -#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ -/* Power saving stuff (power management, unicast and multicast) */ -#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ -#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ -/* Modulation bitmask */ -#define SIOCSIWMODUL 0x8B2E /* set Modulations settings */ -#define SIOCGIWMODUL 0x8B2F /* get Modulations settings */ - -/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). - * This ioctl uses struct iw_point and data buffer that includes IE id and len - * fields. More than one IE may be included in the request. Setting the generic - * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers - * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers - * are required to report the used IE as a wireless event, e.g., when - * associating with an AP. */ -#define SIOCSIWGENIE 0x8B30 /* set generic IE */ -#define SIOCGIWGENIE 0x8B31 /* get generic IE */ - -/* WPA : IEEE 802.11 MLME requests */ -#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses - * struct iw_mlme */ -/* WPA : Authentication mode parameters */ -#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ -#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ - -/* WPA : Extended version of encoding configuration */ -#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ -#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ - -/* WPA2 : PMKSA cache management */ -#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ - -/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - -/* These 32 ioctl are wireless device private, for 16 commands. - * Each driver is free to use them for whatever purpose it chooses, - * however the driver *must* export the description of those ioctls - * with SIOCGIWPRIV and *must* use arguments as defined below. - * If you don't follow those rules, DaveM is going to hate you (reason : - * it make mixed 32/64bit operation impossible). - */ -#define SIOCIWFIRSTPRIV 0x8BE0 -#define SIOCIWLASTPRIV 0x8BFF -/* Previously, we were using SIOCDEVPRIVATE, but we now have our - * separate range because of collisions with other tools such as - * 'mii-tool'. - * We now have 32 commands, so a bit more space ;-). - * Also, all 'even' commands are only usable by root and don't return the - * content of ifr/iwr to user (but you are not obliged to use the set/get - * convention, just use every other two command). More details in iwpriv.c. - * And I repeat : you are not forced to use them with iwpriv, but you - * must be compliant with it. - */ - -/* ------------------------- IOCTL STUFF ------------------------- */ - -/* The first and the last (range) */ -#define SIOCIWFIRST 0x8B00 -#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ -#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) - -/* Odd : get (world access), even : set (root access) */ -#define IW_IS_SET(cmd) (!((cmd) & 0x1)) -#define IW_IS_GET(cmd) ((cmd) & 0x1) - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* Those are *NOT* ioctls, do not issue request on them !!! */ -/* Most events use the same identifier as ioctl requests */ - -#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ -#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ -#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ -#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ -#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ -#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) - * (scan results); This includes id and - * length fields. One IWEVGENIE may - * contain more than one IE. Scan - * results may contain one or more - * IWEVGENIE events. */ -#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure - * (struct iw_michaelmicfailure) - */ -#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. - * The data includes id and length - * fields and may contain more than one - * IE. This event is required in - * Managed mode if the driver - * generates its own WPA/RSN IE. This - * should be sent just before - * IWEVREGISTERED event for the - * association. */ -#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association - * Response. The data includes id and - * length fields and may contain more - * than one IE. This may be sent - * between IWEVASSOCREQIE and - * IWEVREGISTERED events for the - * association. */ -#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN - * pre-authentication - * (struct iw_pmkid_cand) */ - -#define IWEVFIRST 0x8C00 -#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) - -/* ------------------------- PRIVATE INFO ------------------------- */ -/* - * The following is used with SIOCGIWPRIV. It allow a driver to define - * the interface (name, type of data) for its private ioctl. - * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV - */ - -#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ -#define IW_PRIV_TYPE_NONE 0x0000 -#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ -#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ -#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ -#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ -#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ - -#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ - -#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ - -/* - * Note : if the number of args is fixed and the size < 16 octets, - * instead of passing a pointer we will put args in the iwreq struct... - */ - -/* ----------------------- OTHER CONSTANTS ----------------------- */ - -/* Maximum frequencies in the range struct */ -#define IW_MAX_FREQUENCIES 32 -/* Note : if you have something like 80 frequencies, - * don't increase this constant and don't fill the frequency list. - * The user will be able to set by channel anyway... */ - -/* Maximum bit rates in the range struct */ -#define IW_MAX_BITRATES 32 - -/* Maximum tx powers in the range struct */ -#define IW_MAX_TXPOWER 8 -/* Note : if you more than 8 TXPowers, just set the max and min or - * a few of them in the struct iw_range. */ - -/* Maximum of address that you may set with SPY */ -#define IW_MAX_SPY 8 - -/* Maximum of address that you may get in the - list of access points in range */ -#define IW_MAX_AP 64 - -/* Maximum size of the ESSID and NICKN strings */ -#define IW_ESSID_MAX_SIZE 32 - -/* Modes of operation */ -#define IW_MODE_AUTO 0 /* Let the driver decides */ -#define IW_MODE_ADHOC 1 /* Single cell network */ -#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ -#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ -#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ -#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ -#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ - -/* Statistics flags (bitmask in updated) */ -#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ -#define IW_QUAL_LEVEL_UPDATED 0x02 -#define IW_QUAL_NOISE_UPDATED 0x04 -#define IW_QUAL_ALL_UPDATED 0x07 -#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ -#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ -#define IW_QUAL_LEVEL_INVALID 0x20 -#define IW_QUAL_NOISE_INVALID 0x40 -#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ -#define IW_QUAL_ALL_INVALID 0x70 - -/* Frequency flags */ -#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ -#define IW_FREQ_FIXED 0x01 /* Force a specific value */ - -/* Maximum number of size of encoding token available - * they are listed in the range structure */ -#define IW_MAX_ENCODING_SIZES 8 - -/* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ - -/* Flags for encoding (along with the token) */ -#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ -#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ -#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ -#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ -#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ -#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ -#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ -#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ -#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ - -/* Power management flags available (along with the value, if any) */ -#define IW_POWER_ON 0x0000 /* No details... */ -#define IW_POWER_TYPE 0xF000 /* Type of parameter */ -#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ -#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ -#define IW_POWER_SAVING 0x4000 /* Value is relative (how aggressive)*/ -#define IW_POWER_MODE 0x0F00 /* Power Management mode */ -#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ -#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ -#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ -#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ -#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ -#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ -#define IW_POWER_MIN 0x0001 /* Value is a minimum */ -#define IW_POWER_MAX 0x0002 /* Value is a maximum */ -#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Transmit Power flags available */ -#define IW_TXPOW_TYPE 0x00FF /* Type of value */ -#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ -#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ -#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ -#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ - -/* Retry limits and lifetime flags available */ -#define IW_RETRY_ON 0x0000 /* No details... */ -#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ -#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ -#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ -#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ -#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ -#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ -#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ -#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ -#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ - -/* Scanning request flags */ -#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ -#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ -#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ -#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ -#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ -#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ -#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ -#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ -#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -/* struct iw_scan_req scan_type */ -#define IW_SCAN_TYPE_ACTIVE 0 -#define IW_SCAN_TYPE_PASSIVE 1 -/* Maximum size of returned data */ -#define IW_SCAN_MAX_DATA 4096 /* In bytes */ - -/* Max number of char in custom event - use multiple of them if needed */ -#define IW_CUSTOM_MAX 256 /* In bytes */ - -/* Generic information element */ -#define IW_GENERIC_IE_MAX 1024 - -/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ -#define IW_MLME_DEAUTH 0 -#define IW_MLME_DISASSOC 1 -#define IW_MLME_AUTH 2 -#define IW_MLME_ASSOC 3 - -/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ -#define IW_AUTH_INDEX 0x0FFF -#define IW_AUTH_FLAGS 0xF000 -/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) - * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the - * parameter that is being set/get to; value will be read/written to - * struct iw_param value field) */ -#define IW_AUTH_WPA_VERSION 0 -#define IW_AUTH_CIPHER_PAIRWISE 1 -#define IW_AUTH_CIPHER_GROUP 2 -#define IW_AUTH_KEY_MGMT 3 -#define IW_AUTH_TKIP_COUNTERMEASURES 4 -#define IW_AUTH_DROP_UNENCRYPTED 5 -#define IW_AUTH_80211_AUTH_ALG 6 -#define IW_AUTH_WPA_ENABLED 7 -#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 -#define IW_AUTH_ROAMING_CONTROL 9 -#define IW_AUTH_PRIVACY_INVOKED 10 - -/* IW_AUTH_WPA_VERSION values (bit field) */ -#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 -#define IW_AUTH_WPA_VERSION_WPA 0x00000002 -#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 - -/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ -#define IW_AUTH_CIPHER_NONE 0x00000001 -#define IW_AUTH_CIPHER_WEP40 0x00000002 -#define IW_AUTH_CIPHER_TKIP 0x00000004 -#define IW_AUTH_CIPHER_CCMP 0x00000008 -#define IW_AUTH_CIPHER_WEP104 0x00000010 - -/* IW_AUTH_KEY_MGMT values (bit field) */ -#define IW_AUTH_KEY_MGMT_802_1X 1 -#define IW_AUTH_KEY_MGMT_PSK 2 - -/* IW_AUTH_80211_AUTH_ALG values (bit field) */ -#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 -#define IW_AUTH_ALG_SHARED_KEY 0x00000002 -#define IW_AUTH_ALG_LEAP 0x00000004 - -/* IW_AUTH_ROAMING_CONTROL values */ -#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ -#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming - * control */ - -/* SIOCSIWENCODEEXT definitions */ -#define IW_ENCODE_SEQ_MAX_SIZE 8 -/* struct iw_encode_ext ->alg */ -#define IW_ENCODE_ALG_NONE 0 -#define IW_ENCODE_ALG_WEP 1 -#define IW_ENCODE_ALG_TKIP 2 -#define IW_ENCODE_ALG_CCMP 3 -/* struct iw_encode_ext ->ext_flags */ -#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 -#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 -#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 - -/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ -#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ -#define IW_MICFAILURE_GROUP 0x00000004 -#define IW_MICFAILURE_PAIRWISE 0x00000008 -#define IW_MICFAILURE_STAKEY 0x00000010 -#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) - */ - -/* Bit field values for enc_capa in struct iw_range */ -#define IW_ENC_CAPA_WPA 0x00000001 -#define IW_ENC_CAPA_WPA2 0x00000002 -#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 -#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 - -/* Event capability macros - in (struct iw_range *)->event_capa - * Because we have more than 32 possible events, we use an array of - * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ -#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ - (cmd - SIOCIWFIRSTPRIV + 0x60) : \ - (cmd - SIOCSIWCOMMIT)) -#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) -#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) -/* Event capability constants - event autogenerated by the kernel - * This list is valid for most 802.11 devices, customise as needed... */ -#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ - IW_EVENT_CAPA_MASK(0x8B06) | \ - IW_EVENT_CAPA_MASK(0x8B1A)) -#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) -/* "Easy" macro to set events in iw_range (less efficient) */ -#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) -#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } - -/* Modulations bitmasks */ -#define IW_MODUL_ALL 0x00000000 /* Everything supported */ -#define IW_MODUL_FH 0x00000001 /* Frequency Hopping */ -#define IW_MODUL_DS 0x00000002 /* Original Direct Sequence */ -#define IW_MODUL_CCK 0x00000004 /* 802.11b : 5.5 + 11 Mb/s */ -#define IW_MODUL_11B (IW_MODUL_DS | IW_MODUL_CCK) -#define IW_MODUL_PBCC 0x00000008 /* TI : 5.5 + 11 + 22 Mb/s */ -#define IW_MODUL_OFDM_A 0x00000010 /* 802.11a : 54 Mb/s */ -#define IW_MODUL_11A (IW_MODUL_OFDM_A) -#define IW_MODUL_11AB (IW_MODUL_11B | IW_MODUL_11A) -#define IW_MODUL_OFDM_G 0x00000020 /* 802.11g : 54 Mb/s */ -#define IW_MODUL_11G (IW_MODUL_11B | IW_MODUL_OFDM_G) -#define IW_MODUL_11AG (IW_MODUL_11G | IW_MODUL_11A) -#define IW_MODUL_TURBO 0x00000040 /* ATH : bonding, 108 Mb/s */ -/* In here we should define MIMO stuff. Later... */ -#define IW_MODUL_CUSTOM 0x40000000 /* Driver specific */ - -/* Bitrate flags available */ -#define IW_BITRATE_TYPE 0x00FF /* Type of value */ -#define IW_BITRATE_UNICAST 0x0001 /* Maximum/Fixed unicast bitrate */ -#define IW_BITRATE_BROADCAST 0x0002 /* Fixed broadcast bitrate */ - -/****************************** TYPES ******************************/ - -/* --------------------------- SUBTYPES --------------------------- */ -/* - * Generic format for most parameters that fit in an int - */ -struct iw_param -{ - int32_t value; /* The value of the parameter itself */ - uint8_t fixed; /* Hardware should not use auto select */ - uint8_t disabled; /* Disable the feature */ - uint16_t flags; /* Various specifc flags (if any) */ -}; - -/* - * For all data larger than 16 octets, we need to use a - * pointer to memory allocated in user space. - */ -struct iw_point -{ - void *pointer; /* Pointer to the data (in user space) */ - uint16_t length; /* number of fields or size in bytes */ - uint16_t flags; /* Optional params */ -}; - -/* - * A frequency - * For numbers lower than 10^9, we encode the number in 'm' and - * set 'e' to 0 - * For number greater than 10^9, we divide it by the lowest power - * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... - * The power of 10 is in 'e', the result of the division is in 'm'. - */ -struct iw_freq -{ - int32_t m; /* Mantissa */ - int16_t e; /* Exponent */ - uint8_t i; /* List index (when in range struct) */ - uint8_t flags; /* Flags (fixed/auto) */ -}; - -/* - * Quality of the link - */ -struct iw_quality -{ - uint8_t qual; /* link quality (%retries, SNR, - %missed beacons or better...) */ - uint8_t level; /* signal level (dBm) */ - uint8_t noise; /* noise level (dBm) */ - uint8_t updated; /* Flags to know if updated */ -}; - -/* - * Packet discarded in the wireless adapter due to - * "wireless" specific problems... - * Note : the list of counter and statistics in net_device_stats - * is already pretty exhaustive, and you should use that first. - * This is only additional stats... - */ -struct iw_discarded -{ - uint32_t nwid; /* Rx : Wrong nwid/essid */ - uint32_t code; /* Rx : Unable to code/decode (WEP) */ - uint32_t fragment; /* Rx : Can't perform MAC reassembly */ - uint32_t retries; /* Tx : Max MAC retries num reached */ - uint32_t misc; /* Others cases */ -}; - -/* - * Packet/Time period missed in the wireless adapter due to - * "wireless" specific problems... - */ -struct iw_missed -{ - uint32_t beacon; /* Missed beacons/superframe */ -}; - -/* - * Quality range (for spy threshold) - */ -struct iw_thrspy -{ - struct sockaddr addr; /* Source address (hw/mac) */ - struct iw_quality qual; /* Quality of the link */ - struct iw_quality low; /* Low threshold */ - struct iw_quality high; /* High threshold */ -}; - -/* - * Optional data for scan request - * - * Note: these optional parameters are controlling parameters for the - * scanning behavior, these do not apply to getting scan results - * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and - * provide a merged results with all BSSes even if the previous scan - * request limited scanning to a subset, e.g., by specifying an SSID. - * Especially, scan results are required to include an entry for the - * current BSS if the driver is in Managed mode and associated with an AP. - */ -struct iw_scan_req -{ - uint8_t scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ - uint8_t essid_len; - uint8_t num_channels; /* num entries in channel_list; - * 0 = scan all allowed channels */ - uint8_t flags; /* reserved as padding; use zero, this may - * be used in the future for adding flags - * to request different scan behavior */ - struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or - * individual address of a specific BSS */ - - /* - * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using - * the current ESSID. This allows scan requests for specific ESSID - * without having to change the current ESSID and potentially breaking - * the current association. - */ - uint8_t essid[IW_ESSID_MAX_SIZE]; - - /* - * Optional parameters for changing the default scanning behavior. - * These are based on the MLME-SCAN.request from IEEE Std 802.11. - * TU is 1.024 ms. If these are set to 0, driver is expected to use - * reasonable default values. min_channel_time defines the time that - * will be used to wait for the first reply on each channel. If no - * replies are received, next channel will be scanned after this. If - * replies are received, total time waited on the channel is defined by - * max_channel_time. - */ - uint32_t min_channel_time; /* in TU */ - uint32_t max_channel_time; /* in TU */ - - struct iw_freq channel_list[IW_MAX_FREQUENCIES]; -}; - -/* ------------------------- WPA SUPPORT ------------------------- */ - -/* - * Extended data structure for get/set encoding (this is used with - * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* - * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and - * only the data contents changes (key data -> this structure, including - * key data). - * - * If the new key is the first group key, it will be set as the default - * TX key. Otherwise, default TX key index is only changed if - * IW_ENCODE_EXT_SET_TX_KEY flag is set. - * - * Key will be changed with SIOCSIWENCODEEXT in all cases except for - * special "change TX key index" operation which is indicated by setting - * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. - * - * tx_seq/rx_seq are only used when respective - * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal - * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start - * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally - * used only by an Authenticator (AP or an IBSS station) to get the - * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and - * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for - * debugging/testing. - */ -struct iw_encode_ext -{ - uint32_t ext_flags; /* IW_ENCODE_EXT_* */ - uint8_t tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - uint8_t rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast - * (group) keys or unicast address for - * individual keys */ - uint16_t alg; /* IW_ENCODE_ALG_* */ - uint16_t key_len; - uint8_t key[1]; -}; - -/* SIOCSIWMLME data */ -struct iw_mlme -{ - uint16_t cmd; /* IW_MLME_* */ - uint16_t reason_code; - struct sockaddr addr; -}; - -/* SIOCSIWPMKSA data */ -#define IW_PMKSA_ADD 1 -#define IW_PMKSA_REMOVE 2 -#define IW_PMKSA_FLUSH 3 - -#define IW_PMKID_LEN 16 - -struct iw_pmksa -{ - uint32_t cmd; /* IW_PMKSA_* */ - struct sockaddr bssid; - uint8_t pmkid[IW_PMKID_LEN]; -}; - -/* IWEVMICHAELMICFAILURE data */ -struct iw_michaelmicfailure -{ - uint32_t flags; - struct sockaddr src_addr; - uint8_t tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -}; - -/* IWEVPMKIDCAND data */ -#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ -struct iw_pmkid_cand -{ - uint32_t flags; /* IW_PMKID_CAND_* */ - uint32_t index; /* the smaller the index, the higher the - * priority */ - struct sockaddr bssid; -}; - -/* ------------------------ WIRELESS STATS ------------------------ */ -/* - * Wireless statistics (used for /proc/net/wireless) - */ -struct iw_statistics -{ - uint16_t status; /* Status - * - device dependent for now */ - - struct iw_quality qual; /* Quality of the link - * (instant/mean/max) */ - struct iw_discarded discard; /* Packet discarded counts */ - struct iw_missed miss; /* Packet missed counts */ -}; - -/* ------------------------ IOCTL REQUEST ------------------------ */ -/* - * This structure defines the payload of an ioctl, and is used - * below. - * - * Note that this structure should fit on the memory footprint - * of iwreq (which is the same as ifreq), which mean a max size of - * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... - * You should check this when increasing the structures defined - * above in this file... - */ -union iwreq_data -{ - /* Config - generic */ - char name[16]; - /* Name : used to verify the presence of wireless extensions. - * Name of the protocol/provider... */ - - struct iw_point essid; /* Extended network name */ - struct iw_param nwid; /* network id (or domain - the cell) */ - struct iw_freq freq; /* frequency or channel : - * 0-1000 = channel - * > 1000 = frequency in Hz */ - - struct iw_param sens; /* signal level threshold */ - struct iw_param bitrate; /* default bit rate */ - struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ - struct iw_param frag; /* Fragmentation threshold */ - uint32_t mode; /* Operation mode */ - struct iw_param retry; /* Retry limits & lifetime */ - - struct iw_point encoding; /* Encoding stuff : tokens */ - struct iw_param power; /* PM duration/timeout */ - struct iw_quality qual; /* Quality part of statistics */ - - struct sockaddr ap_addr; /* Access point address */ - struct sockaddr addr; /* Destination address (hw/mac) */ - - struct iw_param param; /* Other small parameters */ - struct iw_point data; /* Other large parameters */ -}; - -/* - * The structure to exchange data for ioctl. - * This structure is the same as 'struct ifreq', but (re)defined for - * convenience... - * Do I need to remind you about structure size (32 octets) ? - */ -struct iwreq -{ - union - { - char ifrn_name[16]; /* if name, e.g. "eth0" */ - } ifr_ifrn; - - /* Data part (defined just above) */ - union iwreq_data u; -}; - -/* -------------------------- IOCTL DATA -------------------------- */ -/* - * For those ioctl which want to exchange mode data that what could - * fit in the above structure... - */ - -/* - * Range of parameters - */ - -struct iw_range -{ - /* Informative stuff (to choose between different interface) */ - uint32_t throughput; /* To give an idea... */ - /* In theory this value should be the maximum benchmarked - * TCP/IP throughput, because with most of these devices the - * bit rate is meaningless (overhead an co) to estimate how - * fast the connection will go and pick the fastest one. - * I suggest people to play with Netperf or any benchmark... - */ - - /* NWID (or domain id) */ - uint32_t min_nwid; /* Minimal NWID we are able to set */ - uint32_t max_nwid; /* Maximal NWID we are able to set */ - - /* Old Frequency (backward compat - moved lower ) */ - uint16_t old_num_channels; - uint8_t old_num_frequency; - - /* Wireless event capability bitmasks */ - uint32_t event_capa[6]; - - /* signal level threshold range */ - int32_t sensitivity; - - /* Quality of link & SNR stuff */ - /* Quality range (link, level, noise) - * If the quality is absolute, it will be in the range [0 ; max_qual], - * if the quality is dBm, it will be in the range [max_qual ; 0]. - * Don't forget that we use 8 bit arithmetics... */ - struct iw_quality max_qual; /* Quality of the link */ - /* This should contain the average/typical values of the quality - * indicator. This should be the threshold between a "good" and - * a "bad" link (example : monitor going from green to orange). - * Currently, user space apps like quality monitors don't have any - * way to calibrate the measurement. With this, they can split - * the range between 0 and max_qual in different quality level - * (using a geometric subdivision centered on the average). - * I expect that people doing the user space apps will feedback - * us on which value we need to put in each driver... */ - struct iw_quality avg_qual; /* Quality of the link */ - - /* Rates */ - uint8_t num_bitrates; /* Number of entries in the list */ - int32_t bitrate[IW_MAX_BITRATES]; /* list, in bps */ - - /* RTS threshold */ - int32_t min_rts; /* Minimal RTS threshold */ - int32_t max_rts; /* Maximal RTS threshold */ - - /* Frag threshold */ - int32_t min_frag; /* Minimal frag threshold */ - int32_t max_frag; /* Maximal frag threshold */ - - /* Power Management duration & timeout */ - int32_t min_pmp; /* Minimal PM period */ - int32_t max_pmp; /* Maximal PM period */ - int32_t min_pmt; /* Minimal PM timeout */ - int32_t max_pmt; /* Maximal PM timeout */ - uint16_t pmp_flags; /* How to decode max/min PM period */ - uint16_t pmt_flags; /* How to decode max/min PM timeout */ - uint16_t pm_capa; /* What PM options are supported */ - - /* Encoder stuff */ - uint16_t encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ - uint8_t num_encoding_sizes; /* Number of entry in the list */ - uint8_t max_encoding_tokens; /* Max number of tokens */ - /* For drivers that need a "login/passwd" form */ - uint8_t encoding_login_index; /* token index for login token */ - - /* Transmit power */ - uint16_t txpower_capa; /* What options are supported */ - uint8_t num_txpower; /* Number of entries in the list */ - int32_t txpower[IW_MAX_TXPOWER]; /* list, in bps */ - - /* Wireless Extension version info */ - uint8_t we_version_compiled; /* Must be WIRELESS_EXT */ - uint8_t we_version_source; /* Last update of source */ - - /* Retry limits and lifetime */ - uint16_t retry_capa; /* What retry options are supported */ - uint16_t retry_flags; /* How to decode max/min retry limit */ - uint16_t r_time_flags; /* How to decode max/min retry life */ - int32_t min_retry; /* Minimal number of retries */ - int32_t max_retry; /* Maximal number of retries */ - int32_t min_r_time; /* Minimal retry lifetime */ - int32_t max_r_time; /* Maximal retry lifetime */ - - /* Frequency */ - uint16_t num_channels; /* Number of channels [0; num - 1] */ - uint8_t num_frequency; /* Number of entry in the list */ - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ - - uint32_t enc_capa; /* IW_ENC_CAPA_* bit field */ - - /* More power management stuff */ - int32_t min_pms; /* Minimal PM saving */ - int32_t max_pms; /* Maximal PM saving */ - uint16_t pms_flags; /* How to decode max/min PM saving */ - - /* All available modulations for driver (hw may support less) */ - int32_t modul_capa; /* IW_MODUL_* bit field */ - - /* More bitrate stuff */ - uint32_t bitrate_capa; /* Types of bitrates supported */ -}; - -/* - * Private ioctl interface information - */ - -struct iw_priv_args -{ - uint32_t cmd; /* Number of the ioctl to issue */ - uint16_t set_args; /* Type and number of args */ - uint16_t get_args; /* Type and number of args */ - char name[16]; /* Name of the extension */ -}; - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* - * Wireless events are carried through the rtnetlink socket to user - * space. They are encapsulated in the IFLA_WIRELESS field of - * a RTM_NEWLINK message. - */ - -/* - * A Wireless Event. Contains basically the same data as the ioctl... - */ -struct iw_event -{ - uint16_t len; /* Real lenght of this stuff */ - uint16_t cmd; /* Wireless IOCTL */ - union iwreq_data u; /* IOCTL fixed payload */ -}; - -/* Size of the Event prefix (including padding and alignement junk) */ -#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) -/* Size of the various events */ -#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) -#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(uint32_t)) -#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) - -/* iw_point events are special. First, the payload (extra data) come at - * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, - * we omit the pointer, so start at an offset. */ -#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ - (char *) NULL) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ - IW_EV_POINT_OFF) - -/* Size of the Event prefix when packed in stream */ -#define IW_EV_LCP_PK_LEN (4) -/* Size of the various events when packed in stream */ -#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) -#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(uint32_t)) -#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) -#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) - -#endif /* _LINUX_WIRELESS_H */ diff --git a/package/network/utils/iwinfo/src/iwinfo_madwifi.c b/package/network/utils/iwinfo/src/iwinfo_madwifi.c index 75b0c9f779..bb7fc639b1 100644 --- a/package/network/utils/iwinfo/src/iwinfo_madwifi.c +++ b/package/network/utils/iwinfo/src/iwinfo_madwifi.c @@ -21,7 +21,7 @@ */ #include "iwinfo_wext.h" -#include "iwinfo/api/madwifi.h" +#include "api/madwifi.h" /* diff --git a/package/network/utils/iwinfo/src/iwinfo_nl80211.h b/package/network/utils/iwinfo/src/iwinfo_nl80211.h index a3e696bde4..bb5117e746 100644 --- a/package/network/utils/iwinfo/src/iwinfo_nl80211.h +++ b/package/network/utils/iwinfo/src/iwinfo_nl80211.h @@ -33,7 +33,7 @@ #include "iwinfo.h" #include "iwinfo/utils.h" -#include "iwinfo/api/nl80211.h" +#include "api/nl80211.h" struct nl80211_state { struct nl_sock *nl_sock; diff --git a/package/network/utils/iwinfo/src/iwinfo_wext.h b/package/network/utils/iwinfo/src/iwinfo_wext.h index 48f58d888c..6896450aa8 100644 --- a/package/network/utils/iwinfo/src/iwinfo_wext.h +++ b/package/network/utils/iwinfo/src/iwinfo_wext.h @@ -23,7 +23,7 @@ #include "iwinfo.h" #include "iwinfo/utils.h" -#include "iwinfo/api/wext.h" +#include "api/wext.h" typedef struct stream_descr diff --git a/package/network/utils/iwinfo/src/iwinfo_wl.c b/package/network/utils/iwinfo/src/iwinfo_wl.c index 95240add70..0b3b4bd8a2 100644 --- a/package/network/utils/iwinfo/src/iwinfo_wl.c +++ b/package/network/utils/iwinfo/src/iwinfo_wl.c @@ -19,7 +19,7 @@ */ #include "iwinfo.h" -#include "iwinfo/api/broadcom.h" +#include "api/broadcom.h" static int wl_ioctl(const char *name, int cmd, void *buf, int len) {