From: Jagan Teki Date: Tue, 17 Sep 2019 06:10:41 +0000 (+0530) Subject: configs: tinker: Enable SDRAM, SPL stack X-Git-Tag: v2019.10-rc4~4^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4bd143b57dc0cb07b553c989cc16a785642e2d0f;p=oweals%2Fu-boot.git configs: tinker: Enable SDRAM, SPL stack SPL sets up SDRAM while in its board_init_f() function, it is possible for the stack to move there before board_init_r() is reached. So it is required to reserve the stack for SDRAM, with a proper location and size otherwise any operations during SPL handoff would leads to failure. On, this particular context tinker-rk3288 SPL is failing to launch U-Boot proper on SDRAM due to lack of stack. U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530) Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### So, enable SPL_STACK_R_ADDR and it's related-config items for SDRAM, SPL stack to setup properly. Reported-by: Jagan Teki Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index adab1cba42..359be078ac 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_SPL_SIZE_LIMIT=307200 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 @@ -15,6 +16,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y