From: Marek Vasut <marex@denx.de>
Date: Fri, 17 Jul 2015 00:31:04 +0000 (+0200)
Subject: ddr: altera: Internal mem_calibrate() cleanup part 2
X-Git-Tag: v2015.10-rc2~296
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4ac21610145fc7a2100b33b885b93066cb825bbb;p=oweals%2Fu-boot.git

ddr: altera: Internal mem_calibrate() cleanup part 2

This is kind of microseries-within-series indent cleanup.
Rework the code for the second loop within the middle-loop
of the mega-loop to make it actually readable and not an
insane cryptic pile of indent failure.

It is likely that this patch has checkpatch warnings, but
for the sake of not breaking the code, these are ignored.

No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 59c09b64f9..e2e7184fff 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -3268,7 +3268,6 @@ static uint32_t mem_calibrate(void)
 	uint32_t run_groups, current_run;
 	uint32_t failing_groups = 0;
 	uint32_t group_failed = 0;
-	uint32_t sr_failed = 0;
 
 	const u32 rwdqs_ratio = RW_MGR_MEM_IF_READ_DQS_WIDTH /
 				RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
@@ -3361,40 +3360,32 @@ static uint32_t mem_calibrate(void)
 			}
 
 			/* Calibrate the output side */
-			if (group_failed == 0)	{
-				for (rank_bgn = 0, sr = 0; rank_bgn
-					< RW_MGR_MEM_NUMBER_OF_RANKS;
-					rank_bgn +=
-					NUM_RANKS_PER_SHADOW_REG,
-					++sr) {
-					sr_failed = 0;
-					if (!((STATIC_CALIB_STEPS) &
-					CALIB_SKIP_WRITES)) {
-						if ((STATIC_CALIB_STEPS)
-					& CALIB_SKIP_DELAY_SWEEPS) {
-					/* not needed in quick mode! */
-						} else {
+			if (group_failed == 0) {
+				for (rank_bgn = 0, sr = 0;
+				     rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
+				     rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) {
+					if (STATIC_CALIB_STEPS & CALIB_SKIP_WRITES)
+						continue;
+
+					/* Not needed in quick mode! */
+					if (STATIC_CALIB_STEPS & CALIB_SKIP_DELAY_SWEEPS)
+						continue;
+
 					/*
-					 * Determine if this set of
-					 * ranks should be skipped
-					 * entirely.
+					 * Determine if this set of ranks
+					 * should be skipped entirely.
 					 */
-				if (!param->skip_shadow_regs[sr]) {
-					if (!rw_mgr_mem_calibrate_writes
-					(rank_bgn, write_group,
-					write_test_bgn)) {
-						sr_failed = 1;
-						if (!(gbl->
-						phy_debug_mode_flags &
-					PHY_DEBUG_SWEEP_ALL_GROUPS)) {
-							return 0;
-								}
-								}
-							}
-						}
-					}
-					if (sr_failed != 0)
-						group_failed = 1;
+					if (param->skip_shadow_regs[sr])
+						continue;
+
+					/* Calibrate WRITEs */
+					if (rw_mgr_mem_calibrate_writes(rank_bgn,
+							write_group, write_test_bgn))
+						continue;
+
+					group_failed = 1;
+					if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_SWEEP_ALL_GROUPS))
+						return 0;
 				}
 			}