From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 24 Oct 2014 18:13:51 +0000 (+0200)
Subject: Use __stringify() instead of xstr()
X-Git-Tag: v2015.01-rc1~88
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=4a8c3f693ef2b50b5db5a95a2c32531b35d31dc0;p=oweals%2Fu-boot.git

Use __stringify() instead of xstr()

Some boards still use xstr(). Replace remaining occurrences
of xstr() by commonly used __stringify().

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index adaf44f68f..b775ebd0ed 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -172,9 +172,6 @@
 
 #define CONFIG_BOOTFILE		"uImage"
 
-#define xstr(s)	str(s)
-#define str(s)	#s
-
 /* Setup MTD for NAND on the SOM */
 #define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(MLO),"	\
@@ -201,13 +198,13 @@
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"baudrate=115200\0"						\
 	"consoledev=ttyO2\0"						\
-	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
+	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
 	"loadaddr=0x82000000\0"						\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"load_k=tftp ${loadaddr} ${bootfile}\0"				\
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0"			\
 	"loadmlo=tftp ${loadaddr} ${mlo}\0"				\
-	"mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0"				\
+	"mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0"			\
 	"mmcargs=root=/dev/mmcblk0p2 rw "				\
 		"rootfstype=ext3 rootwait\0"				\
 	"mmcboot=echo Booting from mmc ...; "				\
@@ -221,7 +218,7 @@
 		"bootm ${loadaddr}\0"					\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
-	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0"			\
+	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0"		\
 	"uboot_addr=0x80000\0"						\
 	"update=nandecc sw;nand erase ${uboot_addr} 100000;"		\
 		"nand write ${loadaddr} ${uboot_addr} 80000\0"		\
diff --git a/include/configs/o2d.h b/include/configs/o2d.h
index eff1bcef3b..b2905b2697 100644
--- a/include/configs/o2d.h
+++ b/include/configs/o2d.h
@@ -43,8 +43,8 @@
 
 #define CONFIG_BOARD_NAME		"o2d"
 #define CONFIG_BOARD_BOOTCMD		"run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(126)
-#define BOARD_POST_CRC32_END		xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(126)
+#define BOARD_POST_CRC32_END		__stringify(0x01000000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
@@ -56,7 +56,7 @@
 	"ramtop=fc55ffff\0"						\
 	"jffbot=fc560000\0"						\
 	"jfftop=fcffffff\0"						\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=fc03ffff\0"						\
 	"kernel_addr=0xfc060000\0"					\
 	"ramdisk_addr=0xfc160000\0"					\
diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h
index 1af53834f7..a8222d9f97 100644
--- a/include/configs/o2d300.h
+++ b/include/configs/o2d300.h
@@ -44,8 +44,8 @@
 
 #define CONFIG_BOARD_NAME		"o2d300"
 #define CONFIG_BOARD_BOOTCMD		"run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(126)
-#define BOARD_POST_CRC32_END		xstr(0x02000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(126)
+#define BOARD_POST_CRC32_END		__stringify(0x02000000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
@@ -63,7 +63,7 @@
 	"ramtop=fc57ffff\0"						\
 	"jffbot=fc580000\0"						\
 	"jfftop=fd39ffff\0"						\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=fc03ffff\0"						\
 	"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"	\
 	"halbot=fd3a0000\0"						\
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 133dc6f8cd..183c449284 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -114,9 +114,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define xstr(s) str(s)
-#define str(s)  #s
-
 #if !defined(CONFIG_CONSOLE_DEV)
 #define CONFIG_CONSOLE_DEV	"ttyPSC1"
 #endif
@@ -158,7 +155,7 @@
 	"kernel_addr_r=600000\0"					\
 	"initrd_high=0x03e00000\0"					\
 	"memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0"			\
-	"memtest=mtest 0x00100000 "xstr(CONFIG_SYS_MEMTEST_END)" 0 1\0"	\
+	"memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
@@ -182,7 +179,7 @@
 	"unlock=yes\0"							\
 	"post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;"	\
 		"setenv bootdelay 1;"					\
-		"crc32 "xstr(CONFIG_SYS_TEXT_BASE)" "			\
+		"crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" "		\
 			BOARD_POST_CRC32_END";"				\
 		"setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
 
diff --git a/include/configs/o2dnt2.h b/include/configs/o2dnt2.h
index 3636c0e1d4..1b765a7e4e 100644
--- a/include/configs/o2dnt2.h
+++ b/include/configs/o2dnt2.h
@@ -43,8 +43,8 @@
 
 #define CONFIG_BOARD_NAME		"o2dnt2"
 #define CONFIG_BOARD_BOOTCMD		"run flash_self"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(126)
-#define BOARD_POST_CRC32_END		xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(126)
+#define BOARD_POST_CRC32_END		__stringify(0x01000000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
@@ -56,7 +56,7 @@
 	"ramtop=fc55ffff\0"						\
 	"jffbot=fc560000\0"						\
 	"jfftop=fce5ffff\0"						\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=fc03ffff\0"						\
 	"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"	\
 	"calbot=fce60000\0"						\
diff --git a/include/configs/o2i.h b/include/configs/o2i.h
index 8fe1da58bb..c0fcedaf10 100644
--- a/include/configs/o2i.h
+++ b/include/configs/o2i.h
@@ -37,8 +37,8 @@
 
 #define CONFIG_BOARD_NAME		"o2i"
 #define CONFIG_BOARD_BOOTCMD		"run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(62)
-#define BOARD_POST_CRC32_END		xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(62)
+#define BOARD_POST_CRC32_END		__stringify(0x01000000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
@@ -52,7 +52,7 @@
 	"jfftop=ffebffff\0"						\
 	"kernel_addr=0xff060000\0"					\
 	"ramdisk_addr=0xff160000\0"					\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=ff03ffff\0"						\
 	"autoload=no\0"							\
 	"dhcp_boot=run dhcpcmd; run flash_mtd\0"			\
diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h
index c2164b5efb..eb63cb0c85 100644
--- a/include/configs/o2mnt.h
+++ b/include/configs/o2mnt.h
@@ -39,8 +39,8 @@
 
 #define CONFIG_BOARD_NAME		"o2mnt"
 #define CONFIG_BOARD_BOOTCMD		"${newcmd}"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(62)
-#define BOARD_POST_CRC32_END		xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(62)
+#define BOARD_POST_CRC32_END		__stringify(0x01000000)
 
 #ifndef CONFIG_IFM_SENSOR_TYPE
 #define CONFIG_IFM_SENSOR_TYPE		"O2M110"
@@ -56,7 +56,7 @@
 	"ramtop=ffc5ffff\0"						\
 	"jffbot=ffc60000\0"						\
 	"jfftop=ffffffff\0"						\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=ff03ffff\0"						\
 	"kernel_addr=0xff060000\0"					\
 	"ramdisk_addr=0xff260000\0"					\
diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h
index 05cd360815..77907507b3 100644
--- a/include/configs/o3dnt.h
+++ b/include/configs/o3dnt.h
@@ -44,8 +44,8 @@
 
 #define CONFIG_BOARD_NAME		"o3dnt"
 #define CONFIG_BOARD_BOOTCMD		"run flash_self"
-#define CONFIG_BOARD_MEM_LIMIT		xstr(62)
-#define BOARD_POST_CRC32_END		xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT		__stringify(62)
+#define BOARD_POST_CRC32_END		__stringify(0x01000000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
@@ -57,7 +57,7 @@
 	"ramtop=fc55ffff\0"						\
 	"jffbot=fc560000\0"						\
 	"jfftop=fce5ffff\0"						\
-	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
 	"ubotop=fc03ffff\0"						\
 	"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"	\
 	"calbot=fce60000\0"						\
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 259205e881..d3d3e694cd 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -242,8 +242,6 @@
  * Default environment and default scripts
  * to update uboot and load kernel
  */
-#define xstr(s)	str(s)
-#define str(s)	#s
 
 #define CONFIG_HOSTNAME woodburn
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -263,9 +261,9 @@
 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
 	"loadaddr=80800000\0"						\
 	"kernel_addr_r=80800000\0"					\
-	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
-	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
-	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
+	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
+	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
 	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
@@ -279,9 +277,9 @@
 		"run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
 		"else echo Images not loades;fi\0"			\
-	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
+	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
 	"update=protect off ${uboot_addr} +80000;"			\
 		"erase ${uboot_addr} +80000;"				\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 71373e98f9..6214dc480a 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -181,26 +181,24 @@
 #define CONFIG_UBI_PART				ubi0
 #define CONFIG_UBIFS_VOLUME			rootfs
 
-#define xstr(s)	str(s)
-#define str(s)	#s
-
 #define MTDIDS_DEFAULT		"nand0=nand"
 #define MTDPARTS_DEFAULT	"mtdparts=nand:64M(ubi0),64M(ubi1)"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"u-boot_addr=1000000\0"						\
-	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0"			\
+	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"		\
 	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
-	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
-		"erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"	\
-		"cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE)	\
+	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
+		" +${filesize};"					\
+		"erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
+		"cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
 		" ${filesize};"						\
-		"protect on " xstr(CONFIG_SYS_MONITOR_BASE)		\
+		"protect on " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize}\0"					\
 	"upd=run load update\0"						\
-	"ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0"			\
-	"part=" xstr(CONFIG_UBI_PART) "\0"				\
-	"vol=" xstr(CONFIG_UBIFS_VOLUME) "\0"				\
+	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"		\
+	"part=" __stringify(CONFIG_UBI_PART) "\0"			\
+	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"			\
 	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0"			\
 	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}"	\
 		" ${filesize}\0"					\
@@ -223,11 +221,12 @@
 		"saveenv;boot\0"					\
 	"ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "		\
 		"root=ubi0:rootfs rootfstype=ubifs\0"			\
-	"kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
 	"kernel_fs=/boot/uImage \0"					\
 	"kernel_addr=1000000\0"						\
-	"dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"	\
-	"dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0"			\
+	"dtb=" __stringify(CONFIG_HOSTNAME) "/"				\
+		__stringify(CONFIG_HOSTNAME) ".dtb\0"			\
+	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"		\
 	"dtb_addr=1800000\0"						\
 	"load_kernel=tftp ${kernel_addr} ${kernel}\0"			\
 	"load_dtb=tftp ${dtb_addr} ${dtb}\0"				\