From: Christian Lamparter Date: Wed, 23 Nov 2016 16:17:05 +0000 (+0100) Subject: apm821xx: make it possible to update the dtb partition on the WNDR4700 X-Git-Tag: v17.01.0-rc1~735 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=49856a4bb581;p=oweals%2Fopenwrt.git apm821xx: make it possible to update the dtb partition on the WNDR4700 Currently, the device-tree partition is marked as read-only. Hence, userspace tools like mtd can't write into the partition. This however will be necessary in case the DTB needs to be updated. This patch also adds the kernel.dtb image, so the compiled DTB is exported as a file and available in the binary directory along the firmware images. Note: the u-boot does expects the dtb to be a uimage. To update the dtb manually: 1. copy the generated dtb to the router. 2. mtd erase /dev/mtd2 3. mtd write wndr4700.dtb /dev/mtd2 Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/dts/wndr4700.dts b/target/linux/apm821xx/dts/wndr4700.dts index e0fb4e305f..d1a65f3e62 100644 --- a/target/linux/apm821xx/dts/wndr4700.dts +++ b/target/linux/apm821xx/dts/wndr4700.dts @@ -171,7 +171,6 @@ partition0,2@0x00180000 { label = "device-tree"; reg = <0x00180000 0x00020000>; - read-only; }; partition0,3@0x001a0000 { diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile index 48eef643e1..0ee9cdcd17 100644 --- a/target/linux/apm821xx/image/Makefile +++ b/target/linux/apm821xx/image/Makefile @@ -22,6 +22,10 @@ define Build/dtb $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE)) endef +define Build/export-dtb + cp $(IMAGE_KERNEL).dtb $@ +endef + ifeq ($(SUBTARGET),nand) define Image/cpiogz @@ -186,13 +190,14 @@ define Device/WNDR4700 BLOCKSIZE := 128k DTB_SIZE := 131008 IMAGE_SIZE := 24960k - IMAGES := factory.img sysupgrade.tar + IMAGES := factory.img sysupgrade.tar kernel.dtb KERNEL_SIZE := 1920k KERNEL := dtb | kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip IMAGE/factory.img := create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \ netgear-dni | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.tar := sysupgrade-tar + IMAGE/kernel.dtb := export-dtb | uImage none NETGEAR_BOARD_ID := WNDR4700 NETGEAR_HW_ID := 29763875+128+256 UBINIZE_OPTS := -E 5 @@ -230,10 +235,6 @@ define Build/hdd-img $(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz) endef -define Build/export-dtb - cp $(IMAGE_KERNEL).dtb $@ -endef - define Device/MyBookLiveDefault IMAGE_SIZE := 48m BLOCKSIZE := 1k