From: Stephen Warren Date: Wed, 1 Apr 2015 21:40:53 +0000 (-0600) Subject: ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization X-Git-Tag: v2015.07-rc2~245^2~18 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=48cfca240db06b2945f23b44e37b9a6018cd40fa;p=oweals%2Fu-boot.git ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization As best I can tell, CONFIG_SYS_LOAD_ADDR and CONFIG_LOADADDR/$loadaddr serve essentially the same purpose. Roughly, if a command takes a load address, then CONFIG_SYS_LOAD_ADDR or $loadaddr (or both) are the default if the command-line does not specify the address. Different U-Boot commands are inconsistent re: which of the two default values they use. As such, set the two to the same value, and move the logic that does this into tegra-common-post.h so it's not duplicated. A number of other non- Tegra boards do this too. The values chosen for these macros are no longer consistent with anything in MEM_LAYOUT_ENV_SETTINGS. Regain consistency by setting $kernel_addr_r to CONFIG_LOADADDR. Older scripts tend to use $loadaddr for the default kernel load address, whereas newer scripts and features tend to use $kernel_addr_r, along with other variables for other purposes such as DTBs and initrds. Hence, it's logical they should share the same value. I had originally thought to make the $kernel_addr_r and CONFIG_LOADADDR have different values. This would guarantee no interference if a script used the two variables for different purposes. However, that scenario is unlikely given the semantic meaning associated with the two variables. The lowest available value is 0x90200000; see comments for MEM_LAYOUT_ENV_SETTINGS in tegra30-common-post.h for details. However, that value would be problematic for a script that loaded a raw zImage to $loadaddr, since it's more than 128MB beyond the start of SDRAM, which would interfere with the kernel's CONFIG_AUTO_ZRELADDR. So, let's not do that. The only potential fallout I could foresee from this patch is if someone has a script that loads the kernel to $loadaddr, but some other file (DTB, initrd) to a hard-coded address that the new value of $loadaddr interferes with. This seems unlikely. A user should not do that; they should either hard-code all load addresses, or use U-Boot-supplied variables for all load addresses. Equally, any fallout due to this change is trivial to fix; simply modify the load addresses in that script. Cc: Paul Walmsley Signed-off-by: Stephen Warren Reviewed-by: Paul Walmsley Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 46a155d4b8..0cea795de1 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -50,6 +50,8 @@ #define BOARD_EXTRA_ENV_SETTINGS #endif +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 9eba5d517d..252e607d73 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -26,13 +26,9 @@ */ #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ -/* Environment information, boards can override if required */ -#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ #define CONFIG_STACKBASE 0x82800000 /* 40MB */ /*----------------------------------------------------------------------- @@ -64,10 +60,11 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ +#define CONFIG_LOADADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ - "kernel_addr_r=0x81000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "fdt_addr_r=0x82000000\0" \ "ramdisk_addr_r=0x82100000\0" diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index f2b3774da8..1aee5c89f4 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -18,13 +18,9 @@ */ #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ -/* Environment information, boards can override if required */ -#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ #define CONFIG_STACKBASE 0x82800000 /* 40MB */ /*----------------------------------------------------------------------- @@ -56,10 +52,11 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ +#define CONFIG_LOADADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ - "kernel_addr_r=0x81000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "fdt_addr_r=0x82000000\0" \ "ramdisk_addr_r=0x82100000\0" diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 6330281df7..0841f33bfc 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -24,13 +24,9 @@ */ #define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ -/* Environment information, boards can override if required */ -#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */ - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x00A00800 /* default */ #define CONFIG_STACKBASE 0x02800000 /* 40MB */ /*----------------------------------------------------------------------- @@ -62,10 +58,11 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ +#define CONFIG_LOADADDR 0x01000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x10000000\0" \ "pxefile_addr_r=0x10100000\0" \ - "kernel_addr_r=0x01000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "fdt_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x02100000\0" diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index bfdbeb70d2..3e8e3c1e5b 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -23,13 +23,9 @@ */ #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ -/* Environment information, boards can override if required */ -#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ #define CONFIG_STACKBASE 0x82800000 /* 40MB */ /*----------------------------------------------------------------------- @@ -61,10 +57,11 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ +#define CONFIG_LOADADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ - "kernel_addr_r=0x81000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "fdt_addr_r=0x82000000\0" \ "ramdisk_addr_r=0x82100000\0"