From: Bin Meng Date: Fri, 6 Nov 2015 10:04:49 +0000 (-0800) Subject: x86: qemu: Move chipset-specific codes from pci.c to qemu.c X-Git-Tag: v2016.01-rc1~4^2~6 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=487485956b1f980e8147283069a7af920f25a52c;p=oweals%2Fu-boot.git x86: qemu: Move chipset-specific codes from pci.c to qemu.c Move chipset-specific codes such as PAM init, PCIe ECAM and MP table from pci.c to qemu.c, to prepare for DM PCI conversion. Signed-off-by: Bin Meng Acked-by: Simon Glass --- diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c index 8515d106e3..d50ab752d3 100644 --- a/arch/x86/cpu/qemu/pci.c +++ b/arch/x86/cpu/qemu/pci.c @@ -6,14 +6,9 @@ #include #include -#include -#include -#include DECLARE_GLOBAL_DATA_PTR; -static bool i440fx; - void board_pci_setup_hose(struct pci_controller *hose) { hose->first_busno = 0; @@ -50,72 +45,5 @@ void board_pci_setup_hose(struct pci_controller *hose) int board_pci_post_scan(struct pci_controller *hose) { - u16 device, xbcs; - int pam, i; - - /* - * i440FX and Q35 chipset have different PAM register offset, but with - * the same bitfield layout. Here we determine the offset based on its - * PCI device ID. - */ - device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID); - i440fx = (device == PCI_DEVICE_ID_INTEL_82441); - pam = i440fx ? I440FX_PAM : Q35_PAM; - - /* - * Initialize Programmable Attribute Map (PAM) Registers - * - * Configure legacy segments C/D/E/F to system RAM - */ - for (i = 0; i < PAM_NUM; i++) - x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW); - - if (i440fx) { - /* - * Enable legacy IDE I/O ports decode - * - * Note: QEMU always decode legacy IDE I/O port on PIIX chipset. - * However Linux ata_piix driver does sanity check on these two - * registers to see whether legacy ports decode is turned on. - * This is to make Linux ata_piix driver happy. - */ - x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN); - x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN); - - /* Enable I/O APIC */ - xbcs = x86_pci_read_config16(PIIX_ISA, XBCS); - xbcs |= APIC_EN; - x86_pci_write_config16(PIIX_ISA, XBCS, xbcs); - } else { - /* Configure PCIe ECAM base address */ - x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR, - CONFIG_PCIE_ECAM_BASE | BAR_EN); - } - return 0; } - -#ifdef CONFIG_GENERATE_MP_TABLE -int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) -{ - u8 irq; - - if (i440fx) { - /* - * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not - * connected to I/O APIC INTPIN#16-19. Instead they are routed - * to an irq number controled by the PIRQ routing register. - */ - irq = x86_pci_read_config8(PCI_BDF(bus, dev, func), - PCI_INTERRUPT_LINE); - } else { - /* - * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7. - * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11]. - */ - irq = pirq < 8 ? pirq + 16 : pirq + 12; - } - - return irq; -} -#endif diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c index 7c03e0295b..84fb082077 100644 --- a/arch/x86/cpu/qemu/qemu.c +++ b/arch/x86/cpu/qemu/qemu.c @@ -6,8 +6,58 @@ #include #include +#include #include #include +#include +#include + +static bool i440fx; + +static void qemu_chipset_init(void) +{ + u16 device, xbcs; + int pam, i; + + /* + * i440FX and Q35 chipset have different PAM register offset, but with + * the same bitfield layout. Here we determine the offset based on its + * PCI device ID. + */ + device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID); + i440fx = (device == PCI_DEVICE_ID_INTEL_82441); + pam = i440fx ? I440FX_PAM : Q35_PAM; + + /* + * Initialize Programmable Attribute Map (PAM) Registers + * + * Configure legacy segments C/D/E/F to system RAM + */ + for (i = 0; i < PAM_NUM; i++) + x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW); + + if (i440fx) { + /* + * Enable legacy IDE I/O ports decode + * + * Note: QEMU always decode legacy IDE I/O port on PIIX chipset. + * However Linux ata_piix driver does sanity check on these two + * registers to see whether legacy ports decode is turned on. + * This is to make Linux ata_piix driver happy. + */ + x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN); + x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN); + + /* Enable I/O APIC */ + xbcs = x86_pci_read_config16(PIIX_ISA, XBCS); + xbcs |= APIC_EN; + x86_pci_write_config16(PIIX_ISA, XBCS, xbcs); + } else { + /* Configure PCIe ECAM base address */ + x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR, + CONFIG_PCIE_ECAM_BASE | BAR_EN); + } +} int arch_cpu_init(void) { @@ -39,7 +89,39 @@ void reset_cpu(ulong addr) x86_full_reset(); } +int arch_early_init_r(void) +{ + qemu_chipset_init(); + + return 0; +} + int arch_misc_init(void) { return pirq_init(); } + +#ifdef CONFIG_GENERATE_MP_TABLE +int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) +{ + u8 irq; + + if (i440fx) { + /* + * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not + * connected to I/O APIC INTPIN#16-19. Instead they are routed + * to an irq number controled by the PIRQ routing register. + */ + irq = x86_pci_read_config8(PCI_BDF(bus, dev, func), + PCI_INTERRUPT_LINE); + } else { + /* + * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7. + * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11]. + */ + irq = pirq < 8 ? pirq + 16 : pirq + 12; + } + + return irq; +} +#endif diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 1b544c119e..ac09032836 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -15,6 +15,7 @@ #define CONFIG_SYS_MONITOR_LEN (1 << 20) #define CONFIG_ARCH_MISC_INIT +#define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_PCI_MEM_BUS 0xc0000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS @@ -28,6 +29,7 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0xe000 +#define CONFIG_SYS_EARLY_PCI_INIT #define CONFIG_PCI_PNP #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,vga\0" \