From: Patrick Delaunay Date: Wed, 18 Mar 2020 08:25:00 +0000 (+0100) Subject: stm32mp: stm32prog: add serial link support X-Git-Tag: v2020.07-rc3~19^2~25 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=468f0508b58b02943942c47b66645a05244f2bbf;p=oweals%2Fu-boot.git stm32mp: stm32prog: add serial link support Add a support of UART, using the same protocol than MCU STM32. See "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile index 14f722759c..548a378921 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile @@ -5,4 +5,5 @@ obj-y += cmd_stm32prog.o obj-y += stm32prog.o +obj-y += stm32prog_serial.o obj-y += stm32prog_usb.o diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c index 581f97e0b5..1769ba05f2 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c @@ -25,11 +25,14 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc, if (!strcmp(argv[1], "usb")) link = LINK_USB; + else if (!strcmp(argv[1], "serial")) + link = LINK_SERIAL; if (link == LINK_UNDEFINED) { pr_err("not supported link=%s\n", argv[1]); return CMD_RET_USAGE; } + dev = (int)simple_strtoul(argv[2], NULL, 10); addr = STM32_DDR_BASE; @@ -60,6 +63,12 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc, goto cleanup; switch (link) { + case LINK_SERIAL: + ret = stm32prog_serial_init(data, dev); + if (ret) + goto cleanup; + reset = stm32prog_serial_loop(data); + break; case LINK_USB: reset = stm32prog_usb_loop(data, dev); break; @@ -90,7 +99,7 @@ cleanup: U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog, " [] []\n" "start communication with tools STM32Cubeprogrammer on with Flashlayout at ", - " = usb\n" + " = serial|usb\n" " = device instance\n" " = address of flashlayout\n" " = size of flashlayout\n" diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c index d127afefaa..0967bbc11a 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c @@ -1486,6 +1486,7 @@ void stm32prog_next_phase(struct stm32prog_data *data) } /* found next selected partition */ + data->dfu_seq = 0; data->cur_part = NULL; data->phase = PHASE_END; found = false; @@ -1653,6 +1654,7 @@ int stm32prog_dfu_init(struct stm32prog_data *data) int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size) { memset(data, 0x0, sizeof(*data)); + data->read_phase = PHASE_RESET; data->phase = PHASE_FLASHLAYOUT; return parse_flash_layout(data, addr, size); @@ -1664,6 +1666,7 @@ void stm32prog_clean(struct stm32prog_data *data) dfu_free_entities(); free(data->part_array); free(data->otp_part); + free(data->buffer); free(data->header_data); } @@ -1709,6 +1712,7 @@ void dfu_initiated_callback(struct dfu_entity *dfu) /* force the saved offset for the current partition */ if (dfu->alt == stm32prog_data->cur_part->alt_id) { dfu->offset = stm32prog_data->offset; + stm32prog_data->dfu_seq = 0; pr_debug("dfu offset = 0x%llx\n", dfu->offset); } } diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h index 83b27980f5..c4fdb5b8c3 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h @@ -31,6 +31,7 @@ enum stm32prog_target { }; enum stm32prog_link_t { + LINK_SERIAL, LINK_USB, LINK_UNDEFINED, }; @@ -127,6 +128,14 @@ struct stm32prog_data { /* STM32 header information */ struct raw_header_s *header_data; struct image_header_s header; + + /* SERIAL information */ + u32 cursor; + u32 packet_number; + u32 checksum; + u8 *buffer; /* size = USART_RAM_BUFFER_SIZE*/ + int dfu_seq; + u8 read_phase; }; extern struct stm32prog_data *stm32prog_data; @@ -163,6 +172,8 @@ char *stm32prog_get_error(struct stm32prog_data *data); /* Main function */ int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size); +int stm32prog_serial_init(struct stm32prog_data *data, int link_dev); +bool stm32prog_serial_loop(struct stm32prog_data *data); bool stm32prog_usb_loop(struct stm32prog_data *data, int dev); void stm32prog_clean(struct stm32prog_data *data); diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c new file mode 100644 index 0000000000..5a16979adc --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c @@ -0,0 +1,993 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "stm32prog.h" + +/* - configuration part -----------------------------*/ +#define USART_BL_VERSION 0x40 /* USART bootloader version V4.0*/ +#define UBOOT_BL_VERSION 0x03 /* bootloader version V0.3*/ +#define DEVICE_ID_BYTE1 0x05 /* MSB byte of device ID*/ +#define DEVICE_ID_BYTE2 0x00 /* LSB byte of device ID*/ +#define USART_RAM_BUFFER_SIZE 256 /* Size of USART_RAM_Buf buffer*/ + +/* - Commands -----------------------------*/ +#define GET_CMD_COMMAND 0x00 /* Get CMD command*/ +#define GET_VER_COMMAND 0x01 /* Get Version command*/ +#define GET_ID_COMMAND 0x02 /* Get ID command*/ +#define GET_PHASE_COMMAND 0x03 /* Get Phase command*/ +#define RM_COMMAND 0x11 /* Read Memory command*/ +#define READ_PART_COMMAND 0x12 /* Read Partition command*/ +#define START_COMMAND 0x21 /* START command (Go)*/ +#define DOWNLOAD_COMMAND 0x31 /* Download command*/ +/* existing command for other STM32 but not used */ +/* ERASE 0x43 */ +/* EXTENDED_ERASE 0x44 */ +/* WRITE_UNPROTECTED 0x73 */ +/* READOUT_PROTECT 0x82 */ +/* READOUT_UNPROTECT 0x92 */ + +/* - miscellaneous defines ----------------------------------------*/ +#define INIT_BYTE 0x7F /*Init Byte ID*/ +#define ACK_BYTE 0x79 /*Acknowlede Byte ID*/ +#define NACK_BYTE 0x1F /*No Acknowlede Byte ID*/ +#define ABORT_BYTE 0x5F /*ABORT*/ + +struct udevice *down_serial_dev; + +const u8 cmd_id[] = { + GET_CMD_COMMAND, + GET_VER_COMMAND, + GET_ID_COMMAND, + GET_PHASE_COMMAND, + RM_COMMAND, + READ_PART_COMMAND, + START_COMMAND, + DOWNLOAD_COMMAND +}; + +#define NB_CMD sizeof(cmd_id) + +/* DFU support for serial *********************************************/ +static struct dfu_entity *stm32prog_get_entity(struct stm32prog_data *data) +{ + int alt_id; + + if (!data->cur_part) + if (data->phase == PHASE_FLASHLAYOUT) + alt_id = 0; + else + return NULL; + else + alt_id = data->cur_part->alt_id; + + return dfu_get_entity(alt_id); +} + +static int stm32prog_write(struct stm32prog_data *data, u8 *buffer, + u32 buffer_size) +{ + struct dfu_entity *dfu_entity; + u8 ret = 0; + + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + ret = dfu_write(dfu_entity, + buffer, + buffer_size, + data->dfu_seq); + + if (ret) { + stm32prog_err("DFU write failed [%d] cnt: %d", + ret, data->dfu_seq); + } + data->dfu_seq++; + /* handle rollover as in driver/dfu/dfu.c */ + data->dfu_seq &= 0xffff; + if (buffer_size == 0) + data->dfu_seq = 0; /* flush done */ + + return ret; +} + +static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset, + u8 *buffer, u32 buffer_size) +{ + struct dfu_entity *dfu_entity; + struct stm32prog_part_t *part; + u32 size; + int ret, i; + + if (data->dfu_seq) { + stm32prog_err("DFU write pending for phase %d, seq %d", + data->phase, data->dfu_seq); + return -EINVAL; + } + if (phase == PHASE_FLASHLAYOUT || phase > PHASE_LAST_USER) { + stm32prog_err("read failed : phase %d is invalid", phase); + return -EINVAL; + } + if (data->read_phase <= PHASE_LAST_USER && + phase != data->read_phase) { + /* clear previous read session */ + dfu_entity = dfu_get_entity(data->read_phase - 1); + if (dfu_entity) + dfu_transaction_cleanup(dfu_entity); + } + + dfu_entity = NULL; + /* found partition for the expected phase */ + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + if (part->id == phase) + dfu_entity = dfu_get_entity(part->alt_id); + } + if (!dfu_entity) { + stm32prog_err("read failed : phase %d is unknown", phase); + return -ENODEV; + } + + /* clear pending read before to force offset */ + if (dfu_entity->inited && + (data->read_phase != phase || data->offset != offset)) + dfu_transaction_cleanup(dfu_entity); + + /* initiate before to force offset */ + if (!dfu_entity->inited) { + ret = dfu_transaction_initiate(dfu_entity, true); + if (ret < 0) { + stm32prog_err("DFU read init failed [%d] phase = %d offset = 0x%08x", + ret, phase, offset); + return ret; + } + } + /* force new offset */ + if (dfu_entity->offset != offset) + dfu_entity->offset = offset; + data->offset = offset; + data->read_phase = phase; + pr_debug("\nSTM32 download read %s offset=0x%x\n", + dfu_entity->name, offset); + ret = dfu_read(dfu_entity, buffer, buffer_size, + dfu_entity->i_blk_seq_num); + if (ret < 0) { + stm32prog_err("DFU read failed [%d] phase = %d offset = 0x%08x", + ret, phase, offset); + return ret; + } + + size = ret; + + if (size < buffer_size) { + data->offset = 0; + data->read_phase = PHASE_END; + memset(buffer + size, 0, buffer_size - size); + } else { + data->offset += size; + } + + return ret; +} + +/* UART access ***************************************************/ +int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) +{ + struct udevice *dev = NULL; + int node; + char alias[10]; + const char *path; + struct dm_serial_ops *ops; + /* no parity, 8 bits, 1 stop */ + u32 serial_config = SERIAL_DEFAULT_CONFIG; + + down_serial_dev = NULL; + + sprintf(alias, "serial%d", link_dev); + path = fdt_get_alias(gd->fdt_blob, alias); + if (!path) { + pr_err("%s alias not found", alias); + return -ENODEV; + } + node = fdt_path_offset(gd->fdt_blob, path); + if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, + &dev)) { + down_serial_dev = dev; + } else if (node > 0 && + !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node), + &dev, false)) { + if (!device_probe(dev)) + down_serial_dev = dev; + } + if (!down_serial_dev) { + pr_err("%s = %s device not found", alias, path); + return -ENODEV; + } + + /* force silent console on uart only when used */ + if (gd->cur_serial_dev == down_serial_dev) + gd->flags |= GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT; + else + gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT); + + ops = serial_get_ops(down_serial_dev); + + if (!ops) { + pr_err("%s = %s missing ops", alias, path); + return -ENODEV; + } + if (!ops->setconfig) { + pr_err("%s = %s missing setconfig", alias, path); + return -ENODEV; + } + + clrsetbits_le32(&serial_config, SERIAL_PAR_MASK, SERIAL_PAR_EVEN); + + data->buffer = memalign(CONFIG_SYS_CACHELINE_SIZE, + USART_RAM_BUFFER_SIZE); + + return ops->setconfig(down_serial_dev, serial_config); +} + +static void stm32prog_serial_flush(void) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + } while (err != -EAGAIN); +} + +static int stm32prog_serial_getc_err(void) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + if (err == -EAGAIN) { + ctrlc(); + WATCHDOG_RESET(); + } + } while ((err == -EAGAIN) && (!had_ctrlc())); + + return err; +} + +static u8 stm32prog_serial_getc(void) +{ + int err; + + err = stm32prog_serial_getc_err(); + + return err >= 0 ? err : 0; +} + +static bool stm32prog_serial_get_buffer(u8 *buffer, u32 *count) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + if (err >= 0) { + *buffer++ = err; + *count -= 1; + } else if (err == -EAGAIN) { + ctrlc(); + WATCHDOG_RESET(); + } else { + break; + } + } while (*count && !had_ctrlc()); + + return !!(err < 0); +} + +static void stm32prog_serial_putc(u8 w_byte) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->putc(down_serial_dev, w_byte); + } while (err == -EAGAIN); +} + +/* Helper function ************************************************/ + +static u8 stm32prog_header(struct stm32prog_data *data) +{ + u8 ret; + u8 boot = 0; + struct dfu_entity *dfu_entity; + u64 size = 0; + + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + printf("\nSTM32 download write %s\n", dfu_entity->name); + + /* force cleanup to avoid issue with previous read */ + dfu_transaction_cleanup(dfu_entity); + + ret = stm32prog_header_check(data->header_data, + &data->header); + + /* no header : max size is partition size */ + if (ret) { + dfu_entity->get_medium_size(dfu_entity, &size); + data->header.image_length = size; + } + + /**** Flash the header if necessary for boot partition */ + if (data->phase < PHASE_FIRST_USER) + boot = 1; + + /* write header if boot partition */ + if (boot) { + if (ret) { + stm32prog_err("invalid header (error %d)", ret); + } else { + ret = stm32prog_write(data, + (u8 *)data->header_data, + BL_HEADER_SIZE); + } + } else { + if (ret) + printf(" partition without checksum\n"); + ret = 0; + } + + free(data->header_data); + data->header_data = NULL; + + return ret; +} + +static u8 stm32prog_start(struct stm32prog_data *data, u32 address) +{ + u8 ret = 0; + struct dfu_entity *dfu_entity; + + if (address < 0x100) { + if (address == PHASE_OTP) + return stm32prog_otp_start(data); + + if (address == PHASE_PMIC) + return stm32prog_pmic_start(data); + + if (address == PHASE_RESET || address == PHASE_END) { + data->cur_part = NULL; + data->dfu_seq = 0; + data->phase = address; + return 0; + } + if (address != data->phase) { + stm32prog_err("invalid received phase id %d, current phase is %d", + (u8)address, (u8)data->phase); + return -EINVAL; + } + } + /* check the last loaded partition */ + if (address == DEFAULT_ADDRESS || address == data->phase) { + switch (data->phase) { + case PHASE_END: + case PHASE_RESET: + case PHASE_DO_RESET: + data->cur_part = NULL; + data->phase = PHASE_DO_RESET; + return 0; + } + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + if (data->dfu_seq) { + ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq); + data->dfu_seq = 0; + if (ret) { + stm32prog_err("DFU flush failed [%d]", ret); + return ret; + } + } + printf("\n received length = 0x%x\n", data->cursor); + if (data->header.present) { + if (data->cursor != + (data->header.image_length + BL_HEADER_SIZE)) { + stm32prog_err("transmission interrupted (length=0x%x expected=0x%x)", + data->cursor, + data->header.image_length + + BL_HEADER_SIZE); + return -EIO; + } + if (data->header.image_checksum != data->checksum) { + stm32prog_err("invalid checksum received (0x%x expected 0x%x)", + data->checksum, + data->header.image_checksum); + return -EIO; + } + printf("\n checksum OK (0x%x)\n", data->checksum); + } + + /* update DFU with received flashlayout */ + if (data->phase == PHASE_FLASHLAYOUT) + stm32prog_dfu_init(data); + } else { + void (*entry)(void) = (void *)address; + + printf("## Starting application at 0x%x ...\n", address); + (*entry)(); + printf("## Application terminated\n"); + ret = -ENOEXEC; + } + + return ret; +} + +/** + * get_address() - Get address if it is valid + * + * @tmp_xor: Current xor value to update + * @return The address area + */ +static u32 get_address(u8 *tmp_xor) +{ + u32 address = 0x0; + u8 data; + + data = stm32prog_serial_getc(); + *tmp_xor ^= data; + address |= ((u32)data) << 24; + + data = stm32prog_serial_getc(); + address |= ((u32)data) << 16; + *tmp_xor ^= data; + + data = stm32prog_serial_getc(); + address |= ((u32)data) << 8; + *tmp_xor ^= data; + + data = stm32prog_serial_getc(); + address |= ((u32)data); + *tmp_xor ^= data; + + return address; +} + +static void stm32prog_serial_result(u8 result) +{ + /* always flush fifo before to send result */ + stm32prog_serial_flush(); + stm32prog_serial_putc(result); +} + +/* Command -----------------------------------------------*/ +/** + * get_cmd_command() - Respond to Get command + * + * @data: Current command context + */ +static void get_cmd_command(struct stm32prog_data *data) +{ + u32 counter = 0x0; + + stm32prog_serial_putc(NB_CMD); + stm32prog_serial_putc(USART_BL_VERSION); + + for (counter = 0; counter < NB_CMD; counter++) + stm32prog_serial_putc(cmd_id[counter]); + + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_version_command() - Respond to Get Version command + * + * @data: Current command context + */ +static void get_version_command(struct stm32prog_data *data) +{ + stm32prog_serial_putc(UBOOT_BL_VERSION); + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_id_command() - Respond to Get ID command + * + * @data: Current command context + */ +static void get_id_command(struct stm32prog_data *data) +{ + /* Send Device IDCode */ + stm32prog_serial_putc(0x1); + stm32prog_serial_putc(DEVICE_ID_BYTE1); + stm32prog_serial_putc(DEVICE_ID_BYTE2); + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_phase_command() - Respond to Get phase + * + * @data: Current command context + */ +static void get_phase_command(struct stm32prog_data *data) +{ + char *err_msg = NULL; + u8 i, length = 0; + u32 destination = DEFAULT_ADDRESS; /* destination address */ + int phase = data->phase; + + if (phase == PHASE_RESET || phase == PHASE_DO_RESET) { + err_msg = stm32prog_get_error(data); + length = strlen(err_msg); + } + if (phase == PHASE_FLASHLAYOUT) + destination = STM32_DDR_BASE; + + stm32prog_serial_putc(length + 5); /* Total length */ + stm32prog_serial_putc(phase & 0xFF); /* partition ID */ + stm32prog_serial_putc(destination); /* byte 1 of address */ + stm32prog_serial_putc(destination >> 8); /* byte 2 of address */ + stm32prog_serial_putc(destination >> 16); /* byte 3 of address */ + stm32prog_serial_putc(destination >> 24); /* byte 4 of address */ + + stm32prog_serial_putc(length); /* Information length */ + for (i = 0; i < length; i++) + stm32prog_serial_putc(err_msg[i]); + stm32prog_serial_result(ACK_BYTE); + + if (phase == PHASE_RESET) + stm32prog_do_reset(data); +} + +/** + * read_memory_command() - Read data from memory + * + * @data: Current command context + */ +static void read_memory_command(struct stm32prog_data *data) +{ + u32 address = 0x0; + u8 rcv_data = 0x0, tmp_xor = 0x0; + u32 counter = 0x0; + + /* Read memory address */ + address = get_address(&tmp_xor); + + /* If address memory is not received correctly */ + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + + stm32prog_serial_result(ACK_BYTE); + + /* Read the number of bytes to be received: + * Max NbrOfData = Data + 1 = 256 + */ + rcv_data = stm32prog_serial_getc(); + tmp_xor = ~rcv_data; + if (stm32prog_serial_getc() != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + + /* If checksum is correct send ACK */ + stm32prog_serial_result(ACK_BYTE); + + /* Send data to the host: + * Number of data to read = data + 1 + */ + for (counter = (rcv_data + 1); counter != 0; counter--) + stm32prog_serial_putc(*(u8 *)(address++)); +} + +/** + * start_command() - Respond to start command + * + * Jump to user application in RAM or partition check + * + * @data: Current command context + */ +static void start_command(struct stm32prog_data *data) +{ + u32 address = 0; + u8 tmp_xor = 0x0; + u8 ret, rcv_data; + + /* Read memory address */ + address = get_address(&tmp_xor); + + /* If address memory is not received correctly */ + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + /* validate partition */ + ret = stm32prog_start(data, + address); + + if (ret) + stm32prog_serial_result(ABORT_BYTE); + else + stm32prog_serial_result(ACK_BYTE); +} + +/** + * download_command() - Respond to download command + * + * Write data to not volatile memory, Flash + * + * @data: Current command context + */ +static void download_command(struct stm32prog_data *data) +{ + u32 address = 0x0; + u8 my_xor = 0x0; + u8 rcv_xor; + u32 counter = 0x0, codesize = 0x0; + u8 *ramaddress = 0; + u8 rcv_data = 0x0; + struct image_header_s *image_header = &data->header; + u32 cursor = data->cursor; + long size = 0; + u8 operation; + u32 packet_number; + u32 result = ACK_BYTE; + u8 ret; + unsigned int i; + bool error; + int rcv; + + address = get_address(&my_xor); + + /* If address memory is not received correctly */ + rcv_xor = stm32prog_serial_getc(); + if (rcv_xor != my_xor) { + result = NACK_BYTE; + goto end; + } + + /* If address valid send ACK */ + stm32prog_serial_result(ACK_BYTE); + + /* get packet number and operation type */ + operation = (u8)((u32)address >> 24); + packet_number = ((u32)(((u32)address << 8))) >> 8; + + switch (operation) { + /* supported operation */ + case PHASE_FLASHLAYOUT: + case PHASE_OTP: + case PHASE_PMIC: + break; + default: + result = NACK_BYTE; + goto end; + } + /* check the packet number */ + if (packet_number == 0) { + /* erase: re-initialize the image_header struct */ + data->packet_number = 0; + if (data->header_data) + memset(data->header_data, 0, BL_HEADER_SIZE); + else + data->header_data = calloc(1, BL_HEADER_SIZE); + cursor = 0; + data->cursor = 0; + data->checksum = 0; + /*idx = cursor;*/ + } else { + data->packet_number++; + } + + /* Check with the number of current packet if the device receive + * the true packet + */ + if (packet_number != data->packet_number) { + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /*-- Read number of bytes to be written and data -----------*/ + + /* Read the number of bytes to be written: + * Max NbrOfData = data + 1 <= 256 + */ + rcv_data = stm32prog_serial_getc(); + + /* NbrOfData to write = data + 1 */ + codesize = rcv_data + 0x01; + + if (codesize > USART_RAM_BUFFER_SIZE) { + result = NACK_BYTE; + goto end; + } + + /* Checksum Initialization */ + my_xor = rcv_data; + + /* UART receive data and send to Buffer */ + counter = codesize; + error = stm32prog_serial_get_buffer(data->buffer, &counter); + + /* read checksum */ + if (!error) { + rcv = stm32prog_serial_getc_err(); + error = !!(rcv < 0); + rcv_xor = rcv; + } + + if (error) { + printf("transmission error on packet %d, byte %d\n", + packet_number, codesize - counter); + /* waiting end of packet before flush & NACK */ + mdelay(30); + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /* Compute Checksum */ + ramaddress = data->buffer; + for (counter = codesize; counter != 0; counter--) + my_xor ^= *(ramaddress++); + + /* If Checksum is incorrect */ + if (rcv_xor != my_xor) { + printf("checksum error on packet %d\n", + packet_number); + /* wait to be sure that all data are received + * in the FIFO before flush + */ + mdelay(30); + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /* Update current position in buffer */ + data->cursor += codesize; + + if (operation == PHASE_OTP) { + size = data->cursor - cursor; + /* no header for OTP */ + if (stm32prog_otp_write(data, cursor, + data->buffer, &size)) + result = ABORT_BYTE; + goto end; + } + + if (operation == PHASE_PMIC) { + size = data->cursor - cursor; + /* no header for PMIC */ + if (stm32prog_pmic_write(data, cursor, + data->buffer, &size)) + result = ABORT_BYTE; + goto end; + } + + if (cursor < BL_HEADER_SIZE) { + /* size = portion of header in this chunck */ + if (data->cursor >= BL_HEADER_SIZE) + size = BL_HEADER_SIZE - cursor; + else + size = data->cursor - cursor; + memcpy((void *)((u32)(data->header_data) + cursor), + data->buffer, size); + cursor += size; + + if (cursor == BL_HEADER_SIZE) { + /* Check and Write the header */ + if (stm32prog_header(data)) { + result = ABORT_BYTE; + goto end; + } + } else { + goto end; + } + } + + if (image_header->present) { + if (data->cursor <= BL_HEADER_SIZE) + goto end; + /* compute checksum on payload */ + for (i = (unsigned long)size; i < codesize; i++) + data->checksum += data->buffer[i]; + + if (data->cursor > + image_header->image_length + BL_HEADER_SIZE) { + pr_err("expected size exceeded\n"); + result = ABORT_BYTE; + goto end; + } + + /* write data (payload) */ + ret = stm32prog_write(data, + &data->buffer[size], + codesize - size); + } else { + /* write all */ + ret = stm32prog_write(data, + data->buffer, + codesize); + } + if (ret) + result = ABORT_BYTE; + +end: + stm32prog_serial_result(result); +} + +/** + * read_partition() - Respond to read command + * + * Read data from not volatile memory, Flash + * + * @data: Current command context + */ +static void read_partition_command(struct stm32prog_data *data) +{ + u32 i, part_id, codesize, offset = 0, rcv_data; + long size; + u8 tmp_xor; + int res; + u8 buffer[256]; + + part_id = stm32prog_serial_getc(); + tmp_xor = part_id; + + offset = get_address(&tmp_xor); + + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + pr_debug("1st checksum received = %x, computed %x\n", + rcv_data, tmp_xor); + goto error; + } + stm32prog_serial_putc(ACK_BYTE); + + /* NbrOfData to read = data + 1 */ + rcv_data = stm32prog_serial_getc(); + codesize = rcv_data + 0x01; + tmp_xor = rcv_data; + + rcv_data = stm32prog_serial_getc(); + if ((rcv_data ^ tmp_xor) != 0xFF) { + pr_debug("2nd checksum received = %x, computed %x\n", + rcv_data, tmp_xor); + goto error; + } + + pr_debug("%s : %x\n", __func__, part_id); + rcv_data = 0; + switch (part_id) { + case PHASE_OTP: + size = codesize; + if (!stm32prog_otp_read(data, offset, buffer, &size)) + rcv_data = size; + break; + case PHASE_PMIC: + size = codesize; + if (!stm32prog_pmic_read(data, offset, buffer, &size)) + rcv_data = size; + break; + default: + res = stm32prog_read(data, part_id, offset, + buffer, codesize); + if (res > 0) + rcv_data = res; + break; + } + if (rcv_data > 0) { + stm32prog_serial_putc(ACK_BYTE); + /*----------- Send data to the host -----------*/ + for (i = 0; i < rcv_data; i++) + stm32prog_serial_putc(buffer[i]); + /*----------- Send filler to the host -----------*/ + for (; i < codesize; i++) + stm32prog_serial_putc(0x0); + return; + } + stm32prog_serial_result(ABORT_BYTE); + return; + +error: + stm32prog_serial_result(NACK_BYTE); +} + +/* MAIN function = SERIAL LOOP ***********************************************/ + +/** + * stm32prog_serial_loop() - USART bootloader Loop routine + * + * @data: Current command context + * @return true if reset is needed after loop + */ +bool stm32prog_serial_loop(struct stm32prog_data *data) +{ + u32 counter = 0x0; + u8 command = 0x0; + u8 found; + int phase = data->phase; + + /* element of cmd_func need to aligned with cmd_id[]*/ + void (*cmd_func[NB_CMD])(struct stm32prog_data *) = { + /* GET_CMD_COMMAND */ get_cmd_command, + /* GET_VER_COMMAND */ get_version_command, + /* GET_ID_COMMAND */ get_id_command, + /* GET_PHASE_COMMAND */ get_phase_command, + /* RM_COMMAND */ read_memory_command, + /* READ_PART_COMMAND */ read_partition_command, + /* START_COMMAND */ start_command, + /* DOWNLOAD_COMMAND */ download_command + }; + + /* flush and NACK pending command received during u-boot init + * request command reemit + */ + stm32prog_serial_result(NACK_BYTE); + + clear_ctrlc(); /* forget any previous Control C */ + while (!had_ctrlc()) { + phase = data->phase; + + if (phase == PHASE_DO_RESET) + return true; + + /* Get the user command: read first byte */ + command = stm32prog_serial_getc(); + + if (command == INIT_BYTE) { + puts("\nConnected\n"); + stm32prog_serial_result(ACK_BYTE); + continue; + } + + found = 0; + for (counter = 0; counter < NB_CMD; counter++) + if (cmd_id[counter] == command) { + found = 1; + break; + } + if (found) + if ((command ^ stm32prog_serial_getc()) != 0xFF) + found = 0; + if (!found) { + /* wait to be sure that all data are received + * in the FIFO before flush (CMD and XOR) + */ + mdelay(3); + stm32prog_serial_result(NACK_BYTE); + } else { + stm32prog_serial_result(ACK_BYTE); + cmd_func[counter](data); + } + WATCHDOG_RESET(); + } + + /* clean device */ + if (gd->cur_serial_dev == down_serial_dev) { + /* restore console on uart */ + gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT); + } + down_serial_dev = NULL; + + return false; /* no reset after ctrlc */ +} diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c index 34f27c074f..969245e199 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c @@ -19,6 +19,7 @@ static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase, if (phase == data->phase) { data->offset = offset; + data->dfu_seq = 0; return 0; } @@ -29,6 +30,7 @@ static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase, data->cur_part = part; data->phase = phase; data->offset = offset; + data->dfu_seq = 0; return 0; } }