From: Timur Tabi Date: Fri, 5 Mar 2010 21:29:26 +0000 (+0000) Subject: powerpc/corenet_ds: display the RCW at boot X-Git-Tag: v2010.12-rc2~79^2^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=46299078e6b99f6252a4328a12fa0b3305d04b5e;p=oweals%2Fu-boot.git powerpc/corenet_ds: display the RCW at boot Display the 64-byte Reset Configuration Word (RCW) during boot, so that there's no confusion as to what RCW U-boot is using. Reset Configuration Word (RCW): 00000000: 4a500000 00000000 18181818 00008888 00000010: 28402400 00002000 fe800000 01200000 00000020: 00000000 00000000 00000000 000b0000 00000030: 00000000 00000000 00000000 00000000 Signed-off-by: Timur Tabi Signed-off-by: Roy Zang Signed-off-by: Kumar Gala --- diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 68c63ac027..f183cf61d2 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -45,6 +45,8 @@ int checkboard (void) { u8 sw; struct cpu_type *cpu = gd->cpu; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + unsigned int i; printf("Board: %sDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", @@ -66,6 +68,19 @@ int checkboard (void) puts("36-bit Addressing\n"); #endif + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + /* Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the