From: Kunihiko Hayashi Date: Wed, 18 Apr 2018 01:05:33 +0000 (+0900) Subject: clk: uniphier: add ethernet clock control support X-Git-Tag: v2018.05-rc3~48^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=461766cb69e3d4493fb1f66359a9cd667fc4c3ef;p=oweals%2Fu-boot.git clk: uniphier: add ethernet clock control support Add clock control for ethernet controller on each SoC. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada --- diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index c852c78659..0230a18608 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -21,7 +21,10 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { defined(CONFIG_ARCH_UNIPHIER_PRO4) || defined(CONFIG_ARCH_UNIPHIER_PRO5) ||\ defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B) UNIPHIER_LD4_SYS_CLK_NAND(2), + UNIPHIER_CLK_GATE_SIMPLE(6, 0x2104, 12), /* ether (Pro4, PXs2) */ + UNIPHIER_CLK_GATE_SIMPLE(7, 0x2104, 5), /* ether-gb (Pro4) */ UNIPHIER_CLK_GATE_SIMPLE(8, 0x2104, 10), /* stdmac */ + UNIPHIER_CLK_GATE_SIMPLE(10, 0x2260, 0), /* ether-phy (Pro4) */ UNIPHIER_CLK_GATE_SIMPLE(12, 0x2104, 6), /* gio (Pro4, Pro5) */ UNIPHIER_CLK_GATE_SIMPLE(14, 0x2104, 16), /* usb30 (Pro4, Pro5, PXs2) */ UNIPHIER_CLK_GATE_SIMPLE(15, 0x2104, 17), /* usb31 (Pro4, Pro5, PXs2) */ @@ -34,6 +37,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20) UNIPHIER_LD11_SYS_CLK_NAND(2), + UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 6), /* ether */ UNIPHIER_CLK_GATE_SIMPLE(8, 0x210c, 8), /* stdmac */ UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14), /* usb30 (LD20) */ UNIPHIER_CLK_GATE_SIMPLE(16, 0x210c, 12), /* usb30-phy0 (LD20) */ @@ -45,6 +49,8 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = { const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { #if defined(CONFIG_ARCH_UNIPHIER_PXS3) UNIPHIER_LD11_SYS_CLK_NAND(2), + UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 9), /* ether0 */ + UNIPHIER_CLK_GATE_SIMPLE(7, 0x210c, 10), /* ether1 */ UNIPHIER_CLK_GATE_SIMPLE(12, 0x210c, 4), /* usb30 (gio0) */ UNIPHIER_CLK_GATE_SIMPLE(13, 0x210c, 5), /* usb31-0 (gio1) */ UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 6), /* usb31-1 (gio1-1) */