From: Philipp Tomsich Date: Sun, 26 Mar 2017 16:50:23 +0000 (+0200) Subject: net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable X-Git-Tag: v2017.07-rc1~87^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=449ea2cd0d0c4e46c5b2b21480f34523dd928e33;p=oweals%2Fu-boot.git net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: Philipp Tomsich Acked-by: Maxime Ripard Acked-by: Joe Hershberger --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d49bf572f8..33634c33d4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -22,6 +22,13 @@ menuconfig NETDEVICES if NETDEVICES +config PHY_GIGE + bool "Enable GbE PHY status parsing and configuration" + help + Enables support for parsing the status output and for + configuring GbE PHYs (affects the inner workings of some + commands and miiphyutil.c). + config AG7XXX bool "Atheros AG7xxx Ethernet MAC support" depends on DM_ETH && ARCH_ATH79 @@ -187,6 +194,7 @@ config SUN8I_EMAC bool "Allwinner Sun8i Ethernet MAC support" depends on DM_ETH select PHYLIB + select PHY_GIGE help This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. It can be found in H3/A64/A83T based SoCs and compatible with both diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index aca3990aeb..1afd8097b2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -57,6 +57,40 @@ config PHY_MARVELL config PHY_MICREL bool "Micrel Ethernet PHYs support" + help + Enable support for the GbE PHYs manufactured by Micrel (now + a part of Microchip). This includes drivers for the KSZ804, + KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, KSZ8721 + either/or KSZ9021 (see the "Micrel KSZ9021 family support" + config option for details), and KSZ9031 (if configured). + +if PHY_MICREL + +config PHY_MICREL_KSZ9021 + bool "Micrel KSZ9021 family support" + select PHY_GIGE + help + Enable support for the Micrel KSZ9021 GbE PHY family. If + enabled, the extended register read/write for KSZ9021 PHYs + is supported through the 'mdio' command and any RGMII signal + delays configured in the device tree will be applied to the + PHY during initialisation. + + Note that the KSZ9021 uses the same part number os the + KSZ8921BL, so enabling this option disables support for the + KSZ8721BL. + +config PHY_MICREL_KSZ9031 + bool "Micrel KSZ9031 family support" + select PHY_GIGE + help + Enable support for the Micrel KSZ9031 GbE PHY family. If + enabled, the extended register read/write for KSZ9021 PHYs + is supported through the 'mdio' command and any RGMII signal + delays configured in the device tree will be applied to the + PHY during initialisatioin. + +endif # PHY_MICREL config PHY_MSCC bool "Microsemi Corp Ethernet PHYs support"