From: pekon gupta Date: Fri, 18 Jul 2014 12:29:42 +0000 (+0530) Subject: ARM: omap: move board specific NAND configs out from ti_armv7_common.h X-Git-Tag: v2014.10-rc1~38^2~11^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=434f2cfcad9f70231ad5a096325ba72ef0d2a2cc;p=oweals%2Fu-boot.git ARM: omap: move board specific NAND configs out from ti_armv7_common.h This patch moves some board specific NAND configs: - FROM: generic config file 'ti_armv7_common.h' - TO: individual board config files using these configs. So that each board can independently set the value as per its design. Following configs are affected in this patch: CONFIG_SYS_NAND_U_BOOT_OFFS: CONFIG_CMD_SPL_NAND_OFS: CONFIG_SYS_NAND_SPL_KERNEL_OFFS: CONFIG_CMD_SPL_WRITE_SIZE: This patch also updates documentation for few of above NAND configs. Signed-off-by: Pekon Gupta --- diff --git a/doc/README.nand b/doc/README.nand index 70cf768d23..e29188f1ec 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -89,6 +89,10 @@ Commands: Configuration Options: + CONFIG_SYS_NAND_U_BOOT_OFFS + NAND Offset from where SPL will read u-boot image. This is the starting + address of u-boot MTD partition in NAND. + CONFIG_CMD_NAND Enables NAND support and commmands. @@ -226,6 +230,14 @@ Platform specific options detection. However ECC calculation on such plaforms would still be done by GPMC controller. + CONFIG_SPL_NAND_AM33XX_BCH + Enables SPL-NAND driver (am335x_spl_bch.c) which supports ELM based + hardware ECC correction. This is useful for platforms which have ELM + hardware engine and use NAND boot mode. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling + SPL-NAND driver with software ECC correction support. + CONFIG_NAND_OMAP_ECCSCHEME On OMAP platforms, this CONFIG specifies NAND ECC scheme. It can take following values: diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index c1a6ada0a8..f5bfd5d627 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -254,6 +254,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4d1dd28a91..a3e6452ec1 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -150,6 +150,11 @@ #define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_NAND_ONFI_DETECTION +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index e951389d3b..fe07990640 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -303,5 +303,11 @@ #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 0bb79ab6b5..006c9a9c0d 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -196,6 +196,13 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 38f8dabb2d..e66f30655d 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -216,5 +216,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 236281aa0f..93f4d627a1 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -70,6 +70,12 @@ "4m(kernel),-(fs)" #if defined(CONFIG_CMD_NAND) +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 85104057a9..4684ad6852 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -159,6 +159,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* * USB configuration. We enable MUSB support, both for host and for diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 6e0bf09058..85c027c1d2 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -243,13 +243,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif - /* spl export command */ #define CONFIG_CMD_SPL #endif @@ -275,7 +268,6 @@ #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* !CONFIG_NOR_BOOT */