From: Simon Glass Date: Sun, 18 Oct 2015 01:41:27 +0000 (-0600) Subject: arm: zynq: Move serial driver to driver model X-Git-Tag: v2016.01-rc1~115 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=42800ffa7997082e2466c772bc2395dff0c95e3a;p=oweals%2Fu-boot.git arm: zynq: Move serial driver to driver model Update this driver to use driver model and change all users. Signed-off-by: Simon Glass Signed-off-by: Michal Simek --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fa51d62559..0d756cbc55 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -547,6 +547,7 @@ config ARCH_ZYNQ select DM select SPL_DM select DM_SPI + select DM_SERIAL select DM_SPI_FLASH select SPL_SEPARATE_BSS diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 926ba51dbb..88bebed236 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -6,6 +6,8 @@ */ #include +#include +#include #include #include #include @@ -18,6 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ZYNQ_UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define ZYNQ_UART_SR_TXACTIVE (1 << 11) /* TX active */ #define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ #define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */ @@ -38,9 +41,8 @@ struct uart_zynq { u32 baud_rate_divider; /* 0x34 - Baud Rate Divider [7:0] */ }; -static struct uart_zynq *uart_zynq_ports[2] = { - [0] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR0, - [1] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR1, +struct zynq_uart_priv { + struct uart_zynq *regs; }; /* Set up the baud rate in gd struct */ @@ -84,15 +86,6 @@ static void _uart_zynq_serial_setbrg(struct uart_zynq *regs, writel(bgen, ®s->baud_rate_gen); } -/* Set up the baud rate in gd struct */ -static void uart_zynq_serial_setbrg(const int port) -{ - unsigned long clock = get_uart_clk(port); - struct uart_zynq *regs = uart_zynq_ports[port]; - - return _uart_zynq_serial_setbrg(regs, clock, gd->baudrate); -} - /* Initialize the UART, with...some settings. */ static void _uart_zynq_serial_init(struct uart_zynq *regs) { @@ -102,20 +95,6 @@ static void _uart_zynq_serial_init(struct uart_zynq *regs) writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */ } -/* Initialize the UART, with...some settings. */ -static int uart_zynq_serial_init(const int port) -{ - struct uart_zynq *regs = uart_zynq_ports[port]; - - if (!regs) - return -1; - - _uart_zynq_serial_init(regs); - uart_zynq_serial_setbrg(port); - - return 0; -} - static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c) { if (readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) @@ -126,103 +105,91 @@ static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c) return 0; } -static void uart_zynq_serial_putc(const char c, const int port) +int zynq_serial_setbrg(struct udevice *dev, int baudrate) { - struct uart_zynq *regs = uart_zynq_ports[port]; + struct zynq_uart_priv *priv = dev_get_priv(dev); + unsigned long clock = get_uart_clk(0); - while (_uart_zynq_serial_putc(regs, c) == -EAGAIN) - WATCHDOG_RESET(); + _uart_zynq_serial_setbrg(priv->regs, clock, baudrate); - if (c == '\n') { - while (_uart_zynq_serial_putc(regs, '\r') == -EAGAIN) - WATCHDOG_RESET(); - } + return 0; } -static void uart_zynq_serial_puts(const char *s, const int port) +static int zynq_serial_probe(struct udevice *dev) { - while (*s) - uart_zynq_serial_putc(*s++, port); -} + struct zynq_uart_priv *priv = dev_get_priv(dev); -static int uart_zynq_serial_tstc(const int port) -{ - struct uart_zynq *regs = uart_zynq_ports[port]; + _uart_zynq_serial_init(priv->regs); - return (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0; + return 0; } -static int uart_zynq_serial_getc(const int port) +static int zynq_serial_getc(struct udevice *dev) { - struct uart_zynq *regs = uart_zynq_ports[port]; + struct zynq_uart_priv *priv = dev_get_priv(dev); + struct uart_zynq *regs = priv->regs; + + if (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) + return -EAGAIN; - while (!uart_zynq_serial_tstc(port)) - WATCHDOG_RESET(); return readl(®s->tx_rx_fifo); } -/* Multi serial device functions */ -#define DECLARE_PSSERIAL_FUNCTIONS(port) \ - static int uart_zynq##port##_init(void) \ - { return uart_zynq_serial_init(port); } \ - static void uart_zynq##port##_setbrg(void) \ - { return uart_zynq_serial_setbrg(port); } \ - static int uart_zynq##port##_getc(void) \ - { return uart_zynq_serial_getc(port); } \ - static int uart_zynq##port##_tstc(void) \ - { return uart_zynq_serial_tstc(port); } \ - static void uart_zynq##port##_putc(const char c) \ - { uart_zynq_serial_putc(c, port); } \ - static void uart_zynq##port##_puts(const char *s) \ - { uart_zynq_serial_puts(s, port); } - -/* Serial device descriptor */ -#define INIT_PSSERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = uart_zynq##port##_init, \ - .stop = NULL, \ - .setbrg = uart_zynq##port##_setbrg, \ - .getc = uart_zynq##port##_getc, \ - .tstc = uart_zynq##port##_tstc, \ - .putc = uart_zynq##port##_putc, \ - .puts = uart_zynq##port##_puts, \ -} +static int zynq_serial_putc(struct udevice *dev, const char ch) +{ + struct zynq_uart_priv *priv = dev_get_priv(dev); -DECLARE_PSSERIAL_FUNCTIONS(0); -static struct serial_device uart_zynq_serial0_device = - INIT_PSSERIAL_STRUCTURE(0, "ttyPS0"); -DECLARE_PSSERIAL_FUNCTIONS(1); -static struct serial_device uart_zynq_serial1_device = - INIT_PSSERIAL_STRUCTURE(1, "ttyPS1"); + return _uart_zynq_serial_putc(priv->regs, ch); +} -__weak struct serial_device *default_serial_console(void) +static int zynq_serial_pending(struct udevice *dev, bool input) { - const void *blob = gd->fdt_blob; - int node; - unsigned int base_addr; + struct zynq_uart_priv *priv = dev_get_priv(dev); + struct uart_zynq *regs = priv->regs; - node = fdt_path_offset(blob, "serial0"); - if (node < 0) - return NULL; + if (input) + return !(readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY); + else + return !!(readl(®s->channel_sts) & ZYNQ_UART_SR_TXACTIVE); +} - base_addr = fdtdec_get_addr(blob, node, "reg"); - if (base_addr == FDT_ADDR_T_NONE) - return NULL; +static int zynq_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct zynq_uart_priv *priv = dev_get_priv(dev); + fdt_addr_t addr; - if (base_addr == ZYNQ_SERIAL_BASEADDR0) - return &uart_zynq_serial0_device; + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; - if (base_addr == ZYNQ_SERIAL_BASEADDR1) - return &uart_zynq_serial1_device; + priv->regs = (struct uart_zynq *)addr; - return NULL; + return 0; } -void zynq_serial_initialize(void) -{ - serial_register(&uart_zynq_serial0_device); - serial_register(&uart_zynq_serial1_device); -} +static const struct dm_serial_ops zynq_serial_ops = { + .putc = zynq_serial_putc, + .pending = zynq_serial_pending, + .getc = zynq_serial_getc, + .setbrg = zynq_serial_setbrg, +}; + +static const struct udevice_id zynq_serial_ids[] = { + { .compatible = "xlnx,xuartps" }, + { .compatible = "cdns,uart-r1p8" }, + { } +}; + +U_BOOT_DRIVER(serial_s5p) = { + .name = "serial_zynq", + .id = UCLASS_SERIAL, + .of_match = zynq_serial_ids, + .ofdata_to_platdata = zynq_serial_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct zynq_uart_priv), + .probe = zynq_serial_probe, + .ops = &zynq_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; #ifdef CONFIG_DEBUG_UART_ZYNQ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 32ee0fc149..36c11009fc 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -55,9 +55,7 @@ # define CONFIG_ARM_DCC # define CONFIG_CPU_ARMV8 #else -# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) -# define CONFIG_ZYNQ_SERIAL -# endif +# define CONFIG_ZYNQ_SERIAL #endif #define CONFIG_CONS_INDEX 0 diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index e476eb1b49..ed6023a7bf 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -18,7 +18,6 @@ #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 -#define CONFIG_ZYNQ_SERIAL_UART0 #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index 549a664ef5..b5ffafb561 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h index d116e05ac7..ffc73bd0e3 100644 --- a/include/configs/zynq_picozed.h +++ b/include/configs/zynq_picozed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index b6590547a9..468a6bc7bf 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 7a1b8729e5..63224dd744 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -15,26 +15,20 @@ #define CONFIG_SYS_NO_FLASH #if defined(CONFIG_ZC770_XM010) -# define CONFIG_ZYNQ_SERIAL_UART1 # define CONFIG_ZYNQ_GEM0 # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI #elif defined(CONFIG_ZC770_XM011) -# define CONFIG_ZYNQ_SERIAL_UART1 #elif defined(CONFIG_ZC770_XM012) -# define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH #elif defined(CONFIG_ZC770_XM013) -# define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -#else -# define CONFIG_ZYNQ_SERIAL_UART0 #endif #include diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 946de953e4..6ec6117f17 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index 191f2a5f30..e2270cd2ea 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0