From: Scott Wood Date: Fri, 2 Mar 2012 20:01:57 +0000 (-0600) Subject: nand: extend .raw accesses to work on multiple pages X-Git-Tag: v2012.07-rc1~142^2~6 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=418396e212b59bf907dbccad997ff50f7eb61b16;p=oweals%2Fu-boot.git nand: extend .raw accesses to work on multiple pages A use for this is to read, modify, erase, and write an entire block as a single unit, as a replacement for the biterr command. This way gives more flexibility in that you can also test multiple bit errors, errors in the ECC, etc. Signed-off-by: Scott Wood --- diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 0fd3a6c414..f060a317e0 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -11,7 +11,7 @@ * Added 16-bit nand support * (C) 2004 Texas Instruments * - * Copyright 2010 Freescale Semiconductor + * Copyright 2010, 2012 Freescale Semiconductor * The portions of this file whose copyright is held by Freescale and which * are not considered a derived work of GPL v2-only code may be distributed * and/or modified under the terms of the GNU General Public License as @@ -390,6 +390,41 @@ static void nand_print_and_set_info(int idx) setenv("nand_erasesize", buf); } +static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, + int read) +{ + int ret = 0; + size_t rwsize; + + while (count--) { + /* Raw access */ + mtd_oob_ops_t ops = { + .datbuf = (u8 *)addr, + .oobbuf = ((u8 *)addr) + nand->writesize, + .len = nand->writesize, + .ooblen = nand->oobsize, + .mode = MTD_OOB_RAW + }; + + rwsize = nand->writesize + nand->oobsize; + if (read) + ret = nand->read_oob(nand, off, &ops); + else + ret = nand->write_oob(nand, off, &ops); + + if (ret) { + printf("%s: error at offset %llx, ret %d\n", + __func__, (long long)off, ret); + break; + } + + addr += nand->writesize + nand->oobsize; + off += nand->writesize; + } + + return ret; +} + int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int i, ret = 0; @@ -568,7 +603,9 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) { size_t rwsize; + ulong pagecount = 1; int read; + int raw; if (argc < 4) goto usage; @@ -577,13 +614,36 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ printf("\nNAND %s: ", read ? "read" : "write"); - if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size) != 0) - return 1; nand = &nand_info[dev]; - rwsize = size; s = strchr(cmd, '.'); + + if (!strcmp(s, ".raw")) { + raw = 1; + + if (arg_off(argv[3], &dev, &off, &size)) + return 1; + + if (argc > 4 && !str2long(argv[4], &pagecount)) { + printf("'%s' is not a number\n", argv[4]); + return 1; + } + + if (pagecount * nand->writesize > size) { + puts("Size exceeds partition or device limit\n"); + return -1; + } + + rwsize = pagecount * (nand->writesize + nand->oobsize); + } else { + if (arg_off_size(argc - 3, argv + 3, &dev, + &off, &size) != 0) + return 1; + + rwsize = size; + } + if (!s || !strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) @@ -609,7 +669,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } ret = nand_write_skip_bad(nand, off, &rwsize, - (u_char *)addr, WITH_YAFFS_OOB); + (u_char *)addr, + WITH_INLINE_OOB); #endif } else if (!strcmp(s, ".oob")) { /* out-of-band data */ @@ -623,22 +684,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) ret = nand->read_oob(nand, off, &ops); else ret = nand->write_oob(nand, off, &ops); - } else if (!strcmp(s, ".raw")) { - /* Raw access */ - mtd_oob_ops_t ops = { - .datbuf = (u8 *)addr, - .oobbuf = ((u8 *)addr) + nand->writesize, - .len = nand->writesize, - .ooblen = nand->oobsize, - .mode = MTD_OOB_RAW - }; - - rwsize = nand->writesize + nand->oobsize; - - if (read) - ret = nand->read_oob(nand, off, &ops); - else - ret = nand->write_oob(nand, off, &ops); + } else if (raw) { + ret = raw_access(nand, addr, off, pagecount, read); } else { printf("Unknown nand command suffix '%s'.\n", s); return 1; @@ -732,9 +779,9 @@ U_BOOT_CMD( "nand write - addr off|partition size\n" " read/write 'size' bytes starting at offset 'off'\n" " to/from memory address 'addr', skipping bad blocks.\n" - "nand read.raw - addr off|partition\n" - "nand write.raw - addr off|partition\n" - " Use read.raw/write.raw to avoid ECC and access the page as-is.\n" + "nand read.raw - addr off|partition [count]\n" + "nand write.raw - addr off|partition [count]\n" + " Use read.raw/write.raw to avoid ECC and access the flash as-is.\n" #ifdef CONFIG_CMD_NAND_TRIMFFS "nand write.trimffs - addr off|partition size\n" " write 'size' bytes starting at offset 'off' from memory address\n" diff --git a/doc/README.nand b/doc/README.nand index 04a87c9918..1602b5eee9 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -94,14 +94,14 @@ Commands: of data for one 512-byte page or 2 256-byte pages. There is no check for bad blocks. - nand read.raw addr ofs|partition - Read page from `ofs' in NAND flash to `addr'. This reads the raw page, - so ECC is avoided and the OOB area is read as well. - - nand write.raw addr ofs|partition - Write page from `addr' to `ofs' in NAND flash. This writes the raw page, - so ECC is avoided and the OOB area is written as well, making the whole - page written as-is. + nand read.raw addr ofs|partition [count] + nand write.raw addr ofs|partition [count] + Read or write one or more pages at "ofs" in NAND flash, from or to + "addr" in memory. This is a raw access, so ECC is avoided and the + OOB area is transferred as well. If count is absent, it is assumed + to be one page. As with .yaffs2 accesses, the data is formatted as + a packed sequence of "data, oob, data, oob, ..." -- no alignment of + individual pages is maintained. Configuration Options: