From: Fabio Estevam Date: Fri, 17 Apr 2020 12:27:10 +0000 (-0300) Subject: pmic: pfuze100: Change error message level to debug X-Git-Tag: v2020.07-rc1~30^2~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=417ea635dce2837e2273fa8684ee9750e67eb0ad;p=oweals%2Fu-boot.git pmic: pfuze100: Change error message level to debug In some cases U-Boot runs the same binary on different board versions. In wandboard, for example, there are versions with the PFUZE100 PMIC populated and others without it. When the PMIC is not present, it is not really useful to get PMIC error, so change the error message level to debug instead. Signed-off-by: Fabio Estevam Tested-by: Heiko Schocher --- diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c index 6cf5f35f0f..db630f3ad0 100644 --- a/drivers/power/pmic/pfuze100.c +++ b/drivers/power/pmic/pfuze100.c @@ -41,7 +41,7 @@ static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff, static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int len) { if (dm_i2c_read(dev, reg, buff, len)) { - pr_err("read error from device: %p register: %#x!\n", dev, reg); + debug("read error from device: %p register: %#x!\n", dev, reg); return -EIO; }