From: Alexander Müller Date: Tue, 27 Nov 2018 14:32:18 +0000 (+0100) Subject: ramips: add support for TP-Link TL-WR841n v14 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3fd97c522bb791058215e736a00b86aa8af92363;p=oweals%2Fopenwrt.git ramips: add support for TP-Link TL-WR841n v14 TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N. - MediaTek MT7628NN - 32 MB of RAM - 4 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet Installation: - copy the 'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin' file to your tftp server root and rename it to 'tp_recovery.bin'. - configure your PC running the TFTP server with the static IP address 192.168.0.66/24 - push the reset button and plug in the power connector. Wait until the orange led starts blinking (~6sec) Signed-off-by: Alexander Müller Signed-off-by: Alexander Couzens [small modifications gpio-hog] --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 9cf6e30d39..d020347d72 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -326,6 +326,10 @@ tl-wr841n-v13) ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; +tplink,tl-wr841n-v14) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; tplink,c2-v1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 02ef30cade..b13590566c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -246,6 +246,7 @@ ramips_setup_interfaces() tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13|\ + tplink,tl-wr841n-v14|\ u7628-01-128M-16M|\ ubnt-erx|\ ubnt-erx-sfp|\ diff --git a/target/linux/ramips/dts/TL-WR841NV14.dts b/target/linux/ramips/dts/TL-WR841NV14.dts new file mode 100644 index 0000000000..6e12361ec9 --- /dev/null +++ b/target/linux/ramips/dts/TL-WR841NV14.dts @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc"; + model = "TP-Link TL-WR841N v14"; + + aliases { + led-boot = &led_wlan; + led-failsafe = &led_wlan; + led-upgrade = &led_wlan; + + led-wlan = &led_wlan; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "tl-wr841n-v14:green:lan"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wan_green { + label = "tl-wr841n-v14:green:wan"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led_wlan: wlan { + label = "tl-wr841n-v14:green:wlan"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan_orange { + label = "tl-wr841n-v14:orange:wan"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x10000 0x3e0000>; + }; + + factory: partition@3f0000 { + label = "factory"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&wmac { + status = "okay"; + mtd-mac-address = <&factory 0xf100>; + mediatek,mtd-eeprom = <&factory 0x10000>; +}; + +ðernet { + mtd-mac-address = <&factory 0xf100>; + mediatek,portmap = "wllll"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt"; + ralink,function = "gpio"; + }; + }; +}; + +&gpio1 { + led_wlan_enable { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 2280a1a618..266df857a3 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -259,6 +259,20 @@ define Device/tl-wr841n-v13 endef TARGET_DEVICES += tl-wr841n-v13 +define Device/tplink_tl-wr841n-v14 + $(Device/tplink) + DTS := TL-WR841NV14 + IMAGE_SIZE := 3968k + DEVICE_TITLE := TP-Link TL-WR841N v14 + TPLINK_FLASHLAYOUT := 4Mmtk + TPLINK_HWID := 0x08410014 + TPLINK_HWREV := 0x1 + TPLINK_HWREVADD := 0x14 + TPLINK_HVERSION := 3 + IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin) +endef +TARGET_DEVICES += tplink_tl-wr841n-v14 + define Device/tplink_c20-v4 $(Device/tplink) DTS := ArcherC20v4