From: Stefan Agner Date: Fri, 9 Jun 2017 20:13:12 +0000 (-0700) Subject: imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL X-Git-Tag: v2017.09-rc1~190^2~32 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3fd9579085fae691760486f595b9eda228bfc656;p=oweals%2Fu-boot.git imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL i.MX 6UL and 6ULL have different boot device capabilities and use therefor use a different boot device selection table than other i.MX 6 devices. Particularly, the value which has been used so far (b0001) is assigned to QSPI boot for these two devices. There is no common reserved value for all i.MX 6devices. Use b0010 for i.MX 6UL and 6ULL via compile time ifdef. Reported-by: Joël Esponde Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam Tested-by: Joël Esponde --- diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2bedbdbf20..b881766487 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -548,7 +548,11 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, /* reserved value should start rom usb */ +#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) + {"usb", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, +#else {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, +#endif {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, {"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, {"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},