From: Bin Meng <bmeng.cn@gmail.com>
Date: Wed, 22 May 2019 07:09:46 +0000 (-0700)
Subject: dm: net: macb: Implement link speed change callback
X-Git-Tag: v2019.07-rc4~13^2~2
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3ef64444de157a2e4f6a61b3ea617b9d201a6836;p=oweals%2Fu-boot.git

dm: net: macb: Implement link speed change callback

At present the link speed change callback is a nop. According to
macb device tree bindings, an optional "tx_clk" is used to clock
the ethernet controller's TX_CLK under different link speed.

In 10/100 MII mode, transmit logic must be clocked from a free
running clock generated by the external PHY. In gigabit GMII mode,
the controller, not the external PHY, must generate the 125 MHz
transmit clock towards the PHY.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index b7f404e857..c5560a7111 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -497,6 +497,41 @@ static int macb_phy_find(struct macb_device *macb, const char *name)
 #ifdef CONFIG_DM_ETH
 int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
 {
+#ifdef CONFIG_CLK
+	struct clk tx_clk;
+	ulong rate;
+	int ret;
+
+	/*
+	 * "tx_clk" is an optional clock source for MACB.
+	 * Ignore if it does not exist in DT.
+	 */
+	ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
+	if (ret)
+		return 0;
+
+	switch (speed) {
+	case _10BASET:
+		rate = 2500000;		/* 2.5 MHz */
+		break;
+	case _100BASET:
+		rate = 25000000;	/* 25 MHz */
+		break;
+	case _1000BASET:
+		rate = 125000000;	/* 125 MHz */
+		break;
+	default:
+		/* does not change anything */
+		return 0;
+	}
+
+	if (tx_clk.dev) {
+		ret = clk_set_rate(&tx_clk, rate);
+		if (ret)
+			return ret;
+	}
+#endif
+
 	return 0;
 }
 #else