From: Faiz Abbas Date: Mon, 10 Jun 2019 19:13:34 +0000 (+0530) Subject: mmc: sdhci: Add support for sdhci-caps-mask X-Git-Tag: v2019.10-rc1~25^2~41 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3d296365e4;p=oweals%2Fu-boot.git mmc: sdhci: Add support for sdhci-caps-mask Add Support for masking some bits in the capabilities register of a host controller. Also remove the redundant readl() into caps1. Signed-off-by: Faiz Abbas Reviewed-by: Tom Rini --- diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index c4e88790bc..742a54dacd 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -681,8 +682,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, u32 f_max, u32 f_min) { u32 caps, caps_1 = 0; +#if CONFIG_IS_ENABLED(DM_MMC) + u32 mask[2] = {0}; + int ret; + ret = dev_read_u32_array(host->mmc->dev, "sdhci-caps-mask", + mask, 2); + if (ret && ret != -1) + return ret; + caps = ~mask[1] & sdhci_readl(host, SDHCI_CAPABILITIES); +#else caps = sdhci_readl(host, SDHCI_CAPABILITIES); +#endif #ifdef CONFIG_MMC_SDHCI_SDMA if (!(caps & SDHCI_CAN_DO_SDMA)) { @@ -722,7 +733,11 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, /* Check whether the clock multiplier is supported or not */ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) { +#if CONFIG_IS_ENABLED(DM_MMC) + caps_1 = ~mask[0] & sdhci_readl(host, SDHCI_CAPABILITIES_1); +#else caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); +#endif host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; } @@ -779,9 +794,6 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, cfg->host_caps &= ~MMC_MODE_HS_52MHz; } - if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) - caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); - if (!(cfg->voltages & MMC_VDD_165_195) || (host->quirks & SDHCI_QUIRK_NO_1_8_V)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |