From: Icenowy Zheng Date: Mon, 30 Oct 2017 23:36:28 +0000 (+0800) Subject: sunxi: set the default CPUx frequency of H5 to 816MHz X-Git-Tag: v2018.01-rc3~14^2~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3cfecee49c6fa97a4256f770d12ff476941e5a88;p=oweals%2Fu-boot.git sunxi: set the default CPUx frequency of H5 to 816MHz Some H5 boards are designed to start at 1.1V CPUx voltage (e.g. Nano Pi NEO2), which may not work properly at 1008MHz if the chip's quality is not so good. Lower the default CPUx frequency of H5 to 816MHz. Signed-off-by: Icenowy Zheng Reviewed-by: Jagan Teki --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 09cfec6f57..1fededd0a3 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -397,9 +397,9 @@ config SYS_CLK_FREQ default 1008000000 if MACH_SUN5I default 1008000000 if MACH_SUN6I default 912000000 if MACH_SUN7I + default 816000000 if MACH_SUN50I || MACH_SUN50I_H5 default 1008000000 if MACH_SUN8I default 1008000000 if MACH_SUN9I - default 816000000 if MACH_SUN50I config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I