From: Wenyou Yang <wenyou.yang@microchip.com>
Date: Wed, 13 Sep 2017 06:58:48 +0000 (+0800)
Subject: ARM: at91: spl: Adjust switching to oscillator for SAMA5D2
X-Git-Tag: v2017.11-rc1~129
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3ceb5118c6d7b0e042b399ef03b375fcef93b34d;p=oweals%2Fu-boot.git

ARM: at91: spl: Adjust switching to oscillator for SAMA5D2

As said in 29.5.7 section of SAMA5D2 datasheet, before switching to
the crystal oscillator, a check must be carried out to ensure that
the oscillator is present and that its freqency is valid.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2875ff20b1..08ad1bf2d0 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -87,6 +87,8 @@ typedef struct at91_pmc {
 
 #define AT91_PMC_MCFR_MAINRDY		0x00010000
 #define AT91_PMC_MCFR_MAINF_MASK	0x0000FFFF
+#define AT91_PMC_MCFR_RCMEAS		0x00100000
+#define AT91_PMC_MCFR_CCSS_XTAL_OSC	0x01000000
 
 #define AT91_PMC_MCKR_CSS_SLOW		0x00000000
 #define AT91_PMC_MCKR_CSS_MAIN		0x00000001
diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c
index b75c2ccefd..ce16ef3bdb 100644
--- a/arch/arm/mach-at91/spl_atmel.c
+++ b/arch/arm/mach-at91/spl_atmel.c
@@ -32,6 +32,20 @@ static void switch_to_main_crystal_osc(void)
 	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
 		;
 
+#if defined(CONFIG_SAMA5D2)
+	/* Enable a measurement of the external oscillator */
+	tmp = readl(&pmc->mcfr);
+	tmp |= AT91_PMC_MCFR_CCSS_XTAL_OSC;
+	tmp |= AT91_PMC_MCFR_RCMEAS;
+	writel(tmp, &pmc->mcfr);
+
+	while (!(readl(&pmc->mcfr) & AT91_PMC_MCFR_MAINRDY))
+		;
+
+	if (!(readl(&pmc->mcfr) & AT91_PMC_MCFR_MAINF_MASK))
+		hang();
+#endif
+
 	tmp = readl(&pmc->mor);
 	tmp &= ~AT91_PMC_MOR_OSCBYPASS;
 	tmp &= ~AT91_PMC_MOR_KEY(0xff);
@@ -47,11 +61,13 @@ static void switch_to_main_crystal_osc(void)
 	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
 		;
 
+#if !defined(CONFIG_SAMA5D2)
 	/* Wait until MAINRDY field is set to make sure main clock is stable */
 	while (!(readl(&pmc->mcfr) & AT91_PMC_MAINRDY))
 		;
+#endif
 
-#ifndef CONFIG_SAMA5D4
+#if !defined(CONFIG_SAMA5D4) && !defined(CONFIG_SAMA5D2)
 	tmp = readl(&pmc->mor);
 	tmp &= ~AT91_PMC_MOR_MOSCRCEN;
 	tmp &= ~AT91_PMC_MOR_KEY(0xff);