From: Stijn Tintel Date: Sun, 8 Oct 2017 11:58:59 +0000 (+0300) Subject: kernel: split 82574L patch into multiple files X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3a69ad3b2a0df578ca340ba95f35230ee9529c9c;p=librecmc%2Flibrecmc.git kernel: split 82574L patch into multiple files When refreshing patches that cointain multiple patches including headers in a single file, quilt will remove the headers from all but the first patch. This makes it difficult to review commits that refresh patches. Next to that, if only a few of the patch series are accepted in -stable, the patch needs to be manually modified. With each patch in a separate file, it's just a matter of git rm. Refresh patches while at it. Patchwork links: [1/5] https://patchwork.kernel.org/patch/9857487/ [2/5] https://patchwork.kernel.org/patch/9857489/ [3/5] https://patchwork.kernel.org/patch/9857495/ [4/5] https://patchwork.kernel.org/patch/9857491/ [5/5] https://patchwork.kernel.org/patch/9857493/ Signed-off-by: Stijn Tintel --- diff --git a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch new file mode 100644 index 0000000000..8ed91db6ef --- /dev/null +++ b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch @@ -0,0 +1,52 @@ +From patchwork Fri Jul 21 18:36:23 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [1/5] e1000e: Fix error path in link detection +From: Benjamin Poirier +X-Patchwork-Id: 9857487 +Message-Id: <20170721183627.13373-1-bpoirier@suse.com> +To: Jeff Kirsher +Cc: Lennart Sorensen , + intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Date: Fri, 21 Jul 2017 11:36:23 -0700 + +In case of error from e1e_rphy(), the loop will exit early and "success" +will be set to true erroneously. + +Signed-off-by: Benjamin Poirier +--- + drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/drivers/net/ethernet/intel/e1000e/phy.c ++++ b/drivers/net/ethernet/intel/e1000e/phy.c +@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e + s32 ret_val = 0; + u16 i, phy_status; + ++ *success = false; + for (i = 0; i < iterations; i++) { + /* Some PHYs require the MII_BMSR register to be read + * twice due to the link bit being sticky. No harm doing +@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); + if (ret_val) + break; +- if (phy_status & BMSR_LSTATUS) ++ if (phy_status & BMSR_LSTATUS) { ++ *success = true; + break; ++ } + if (usec_interval >= 1000) + msleep(usec_interval / 1000); + else + udelay(usec_interval); + } + +- *success = (i < iterations); +- + return ret_val; + } + diff --git a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch new file mode 100644 index 0000000000..b3291dbd6f --- /dev/null +++ b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch @@ -0,0 +1,43 @@ +From patchwork Fri Jul 21 18:36:24 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [2/5] e1000e: Fix wrong comment related to link detection +From: Benjamin Poirier +X-Patchwork-Id: 9857489 +Message-Id: <20170721183627.13373-2-bpoirier@suse.com> +To: Jeff Kirsher +Cc: Lennart Sorensen , + intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Date: Fri, 21 Jul 2017 11:36:24 -0700 + +Reading e1000e_check_for_copper_link() shows that get_link_status is set to +false after link has been detected. Therefore, it stays TRUE until then. + +Signed-off-by: Benjamin Poirier +Tested-by: Aaron Brown +--- + drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/intel/e1000e/netdev.c ++++ b/drivers/net/ethernet/intel/e1000e/netdev.c +@@ -5049,7 +5049,7 @@ static bool e1000e_has_link(struct e1000 + + /* get_link_status is set on LSC (link status) interrupt or + * Rx sequence error interrupt. get_link_status will stay +- * false until the check_for_link establishes link ++ * true until the check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->phy.media_type) { +@@ -5067,7 +5067,7 @@ static bool e1000e_has_link(struct e1000 + break; + case e1000_media_type_internal_serdes: + ret_val = hw->mac.ops.check_for_link(hw); +- link_active = adapter->hw.mac.serdes_has_link; ++ link_active = hw->mac.serdes_has_link; + break; + default: + case e1000_media_type_unknown: diff --git a/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch b/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch new file mode 100644 index 0000000000..a777138936 --- /dev/null +++ b/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch @@ -0,0 +1,32 @@ +From patchwork Fri Jul 21 18:36:25 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [3/5] e1000e: Fix return value test +From: Benjamin Poirier +X-Patchwork-Id: 9857495 +Message-Id: <20170721183627.13373-3-bpoirier@suse.com> +To: Jeff Kirsher +Cc: Lennart Sorensen , + intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Date: Fri, 21 Jul 2017 11:36:25 -0700 + +All the helpers return -E1000_ERR_PHY. + +Signed-off-by: Benjamin Poirier +--- + drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/intel/e1000e/netdev.c ++++ b/drivers/net/ethernet/intel/e1000e/netdev.c +@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000 + break; + } + +- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && ++ if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && + (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { + /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ + e_info("Gigabit has been disabled, downgrading speed\n"); diff --git a/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch b/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch new file mode 100644 index 0000000000..cc2cf7393f --- /dev/null +++ b/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch @@ -0,0 +1,90 @@ +From patchwork Fri Jul 21 18:36:26 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [4/5] e1000e: Separate signaling for link check/link up +From: Benjamin Poirier +X-Patchwork-Id: 9857491 +Message-Id: <20170721183627.13373-4-bpoirier@suse.com> +To: Jeff Kirsher +Cc: Lennart Sorensen , + intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Date: Fri, 21 Jul 2017 11:36:26 -0700 + +Lennart reported the following race condition: + +\ e1000_watchdog_task + \ e1000e_has_link + \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link + /* link is up */ + mac->get_link_status = false; + + /* interrupt */ + \ e1000_msix_other + hw->mac.get_link_status = true; + + link_active = !hw->mac.get_link_status + /* link_active is false, wrongly */ + +This problem arises because the single flag get_link_status is used to +signal two different states: link status needs checking and link status is +down. + +Avoid the problem by using the return value of .check_for_link to signal +the link status to e1000e_has_link(). + +Reported-by: Lennart Sorensen +Signed-off-by: Benjamin Poirier +--- + drivers/net/ethernet/intel/e1000e/mac.c | 11 ++++++++--- + drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- + 2 files changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/intel/e1000e/mac.c ++++ b/drivers/net/ethernet/intel/e1000e/mac.c +@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. ++ * ++ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link ++ * up). + **/ + s32 e1000e_check_for_copper_link(struct e1000_hw *hw) + { +@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) +- return 0; ++ return 1; + + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex +@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct + * different link partner. + */ + ret_val = e1000e_config_fc_after_link_up(hw); +- if (ret_val) ++ if (ret_val) { + e_dbg("Error configuring flow control\n"); ++ return ret_val; ++ } + +- return ret_val; ++ return 1; + } + + /** +--- a/drivers/net/ethernet/intel/e1000e/netdev.c ++++ b/drivers/net/ethernet/intel/e1000e/netdev.c +@@ -5056,7 +5056,7 @@ static bool e1000e_has_link(struct e1000 + case e1000_media_type_copper: + if (hw->mac.get_link_status) { + ret_val = hw->mac.ops.check_for_link(hw); +- link_active = !hw->mac.get_link_status; ++ link_active = ret_val > 0; + } else { + link_active = true; + } diff --git a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch new file mode 100644 index 0000000000..b42fed293d --- /dev/null +++ b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch @@ -0,0 +1,109 @@ +From patchwork Fri Jul 21 18:36:27 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts +From: Benjamin Poirier +X-Patchwork-Id: 9857493 +Message-Id: <20170721183627.13373-5-bpoirier@suse.com> +To: Jeff Kirsher +Cc: Lennart Sorensen , + intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Date: Fri, 21 Jul 2017 11:36:27 -0700 + +When e1000e_poll() is not fast enough to keep up with incoming traffic, the +adapter (when operating in msix mode) raises the Other interrupt to signal +Receiver Overrun. + +This is a double problem because 1) at the moment e1000_msix_other() +assumes that it is only called in case of Link Status Change and 2) if the +condition persists, the interrupt is repeatedly raised again in quick +succession. + +Ideally we would configure the Other interrupt to not be raised in case of +receiver overrun but this doesn't seem possible on this adapter. Instead, +we handle the first part of the problem by reverting to the practice of +reading ICR in the other interrupt handler, like before commit 16ecba59bc33 +("e1000e: Do not read ICR in Other interrupt"). Thanks to commit +0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME +from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts +anymore. We handle the second part of the problem by not re-enabling the +Other interrupt right away when there is overrun. Instead, we wait until +traffic subsides, napi polling mode is exited and interrupts are +re-enabled. + +Reported-by: Lennart Sorensen +Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt") +Signed-off-by: Benjamin Poirier +--- + drivers/net/ethernet/intel/e1000e/defines.h | 1 + + drivers/net/ethernet/intel/e1000e/netdev.c | 33 +++++++++++++++++++++++------ + 2 files changed, 27 insertions(+), 7 deletions(-) + +--- a/drivers/net/ethernet/intel/e1000e/defines.h ++++ b/drivers/net/ethernet/intel/e1000e/defines.h +@@ -398,6 +398,7 @@ + #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ + #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ + #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ ++#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */ + #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ + #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ + /* If this bit asserted, the driver should claim the interrupt */ +--- a/drivers/net/ethernet/intel/e1000e/netdev.c ++++ b/drivers/net/ethernet/intel/e1000e/netdev.c +@@ -1905,12 +1905,30 @@ static irqreturn_t e1000_msix_other(int + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; ++ u32 icr; ++ bool enable = true; + +- hw->mac.get_link_status = true; ++ icr = er32(ICR); ++ if (icr & E1000_ICR_RXO) { ++ ew32(ICR, E1000_ICR_RXO); ++ enable = false; ++ /* napi poll will re-enable Other, make sure it runs */ ++ if (napi_schedule_prep(&adapter->napi)) { ++ adapter->total_rx_bytes = 0; ++ adapter->total_rx_packets = 0; ++ __napi_schedule(&adapter->napi); ++ } ++ } ++ if (icr & E1000_ICR_LSC) { ++ ew32(ICR, E1000_ICR_LSC); ++ hw->mac.get_link_status = true; ++ /* guard against interrupt when we're going down */ ++ if (!test_bit(__E1000_DOWN, &adapter->state)) { ++ mod_timer(&adapter->watchdog_timer, jiffies + 1); ++ } ++ } + +- /* guard against interrupt when we're going down */ +- if (!test_bit(__E1000_DOWN, &adapter->state)) { +- mod_timer(&adapter->watchdog_timer, jiffies + 1); ++ if (enable && !test_bit(__E1000_DOWN, &adapter->state)) { + ew32(IMS, E1000_IMS_OTHER); + } + +@@ -2683,7 +2701,8 @@ static int e1000e_poll(struct napi_struc + napi_complete_done(napi, work_done); + if (!test_bit(__E1000_DOWN, &adapter->state)) { + if (adapter->msix_entries) +- ew32(IMS, adapter->rx_ring->ims_val); ++ ew32(IMS, adapter->rx_ring->ims_val | ++ E1000_IMS_OTHER); + else + e1000_irq_enable(adapter); + } +@@ -4178,7 +4197,7 @@ static void e1000e_trigger_lsc(struct e1 + struct e1000_hw *hw = &adapter->hw; + + if (adapter->msix_entries) +- ew32(ICS, E1000_ICS_OTHER); ++ ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER); + else + ew32(ICS, E1000_ICS_LSC); + } diff --git a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch deleted file mode 100644 index f2966fafbb..0000000000 --- a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch +++ /dev/null @@ -1,327 +0,0 @@ -Subject: [1/5] e1000e: Fix error path in link detection -From: Benjamin Poirier -X-Patchwork-Id: 792259 -Message-Id: <20170721183627.13373-1-bpoirier@suse.com> -To: Jeff Kirsher -Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org, - linux-kernel@vger.kernel.org, - Lennart Sorensen -Date: Fri, 21 Jul 2017 11:36:23 -0700 - -In case of error from e1e_rphy(), the loop will exit early and "success" -will be set to true erroneously. - -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c -index d78d47b41a71..86ff0969efb6 100644 ---- a/drivers/net/ethernet/intel/e1000e/phy.c -+++ b/drivers/net/ethernet/intel/e1000e/phy.c -@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - s32 ret_val = 0; - u16 i, phy_status; - -+ *success = false; - for (i = 0; i < iterations; i++) { - /* Some PHYs require the MII_BMSR register to be read - * twice due to the link bit being sticky. No harm doing -@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); - if (ret_val) - break; -- if (phy_status & BMSR_LSTATUS) -+ if (phy_status & BMSR_LSTATUS) { -+ *success = true; - break; -+ } - if (usec_interval >= 1000) - msleep(usec_interval / 1000); - else - udelay(usec_interval); - } - -- *success = (i < iterations); -- - return ret_val; - } - - -Subject: [2/5] e1000e: Fix wrong comment related to link detection -From: Benjamin Poirier -X-Patchwork-Id: 792257 -Message-Id: <20170721183627.13373-2-bpoirier@suse.com> -To: Jeff Kirsher -Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org, - linux-kernel@vger.kernel.org, - Lennart Sorensen -Date: Fri, 21 Jul 2017 11:36:24 -0700 - -Reading e1000e_check_for_copper_link() shows that get_link_status is set to -false after link has been detected. Therefore, it stays TRUE until then. - -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c -index 2dcb5463d9b8..58a87134d2e5 100644 ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) - - /* get_link_status is set on LSC (link status) interrupt or - * Rx sequence error interrupt. get_link_status will stay -- * false until the check_for_link establishes link -+ * true until the check_for_link establishes link - * for copper adapters ONLY - */ - switch (hw->phy.media_type) { -@@ -5092,7 +5092,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) - break; - case e1000_media_type_internal_serdes: - ret_val = hw->mac.ops.check_for_link(hw); -- link_active = adapter->hw.mac.serdes_has_link; -+ link_active = hw->mac.serdes_has_link; - break; - default: - case e1000_media_type_unknown: - -Content-Transfer-Encoding: 7bit -Subject: [3/5] e1000e: Fix return value test -From: Benjamin Poirier -X-Patchwork-Id: 792258 -Message-Id: <20170721183627.13373-3-bpoirier@suse.com> -To: Jeff Kirsher -Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org, - linux-kernel@vger.kernel.org, - Lennart Sorensen -Date: Fri, 21 Jul 2017 11:36:25 -0700 - -All the helpers return -E1000_ERR_PHY. - -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c -index 58a87134d2e5..fc6a1d9999b2 100644 ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5099,7 +5099,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) - break; - } - -- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && -+ if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && - (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - e_info("Gigabit has been disabled, downgrading speed\n"); - -Content-Transfer-Encoding: 7bit -Subject: [4/5] e1000e: Separate signaling for link check/link up -From: Benjamin Poirier -X-Patchwork-Id: 792262 -Message-Id: <20170721183627.13373-4-bpoirier@suse.com> -To: Jeff Kirsher -Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org, - linux-kernel@vger.kernel.org, - Lennart Sorensen -Date: Fri, 21 Jul 2017 11:36:26 -0700 - -Lennart reported the following race condition: - -\ e1000_watchdog_task - \ e1000e_has_link - \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link - /* link is up */ - mac->get_link_status = false; - - /* interrupt */ - \ e1000_msix_other - hw->mac.get_link_status = true; - - link_active = !hw->mac.get_link_status - /* link_active is false, wrongly */ - -This problem arises because the single flag get_link_status is used to -signal two different states: link status needs checking and link status is -down. - -Avoid the problem by using the return value of .check_for_link to signal -the link status to e1000e_has_link(). - -Reported-by: Lennart Sorensen -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/mac.c | 11 ++++++++--- - drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- - 2 files changed, 9 insertions(+), 4 deletions(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c -index b322011ec282..f457c5703d0c 100644 ---- a/drivers/net/ethernet/intel/e1000e/mac.c -+++ b/drivers/net/ethernet/intel/e1000e/mac.c -@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) - * Checks to see of the link status of the hardware has changed. If a - * change in link status has been detected, then we read the PHY registers - * to get the current speed/duplex if link exists. -+ * -+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link -+ * up). - **/ - s32 e1000e_check_for_copper_link(struct e1000_hw *hw) - { -@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) - * Change or Rx Sequence Error interrupt. - */ - if (!mac->get_link_status) -- return 0; -+ return 1; - - /* First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex -@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) - * different link partner. - */ - ret_val = e1000e_config_fc_after_link_up(hw); -- if (ret_val) -+ if (ret_val) { - e_dbg("Error configuring flow control\n"); -+ return ret_val; -+ } - -- return ret_val; -+ return 1; - } - - /** -diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c -index fc6a1d9999b2..5a8ab1136566 100644 ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5081,7 +5081,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) - case e1000_media_type_copper: - if (hw->mac.get_link_status) { - ret_val = hw->mac.ops.check_for_link(hw); -- link_active = !hw->mac.get_link_status; -+ link_active = ret_val > 0; - } else { - link_active = true; - } - -Content-Transfer-Encoding: 7bit -Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts -From: Benjamin Poirier -X-Patchwork-Id: 792260 -Message-Id: <20170721183627.13373-5-bpoirier@suse.com> -To: Jeff Kirsher -Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org, - linux-kernel@vger.kernel.org, - Lennart Sorensen -Date: Fri, 21 Jul 2017 11:36:27 -0700 - -When e1000e_poll() is not fast enough to keep up with incoming traffic, the -adapter (when operating in msix mode) raises the Other interrupt to signal -Receiver Overrun. - -This is a double problem because 1) at the moment e1000_msix_other() -assumes that it is only called in case of Link Status Change and 2) if the -condition persists, the interrupt is repeatedly raised again in quick -succession. - -Ideally we would configure the Other interrupt to not be raised in case of -receiver overrun but this doesn't seem possible on this adapter. Instead, -we handle the first part of the problem by reverting to the practice of -reading ICR in the other interrupt handler, like before commit 16ecba59bc33 -("e1000e: Do not read ICR in Other interrupt"). Thanks to commit -0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME -from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts -anymore. We handle the second part of the problem by not re-enabling the -Other interrupt right away when there is overrun. Instead, we wait until -traffic subsides, napi polling mode is exited and interrupts are -re-enabled. - -Reported-by: Lennart Sorensen -Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt") -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/defines.h | 1 + - drivers/net/ethernet/intel/e1000e/netdev.c | 33 +++++++++++++++++++++++------ - 2 files changed, 27 insertions(+), 7 deletions(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h -index 0641c0098738..afb7ebe20b24 100644 ---- a/drivers/net/ethernet/intel/e1000e/defines.h -+++ b/drivers/net/ethernet/intel/e1000e/defines.h -@@ -398,6 +398,7 @@ - #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ - #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ - #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ -+#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */ - #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ - #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ - /* If this bit asserted, the driver should claim the interrupt */ -diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c -index 5a8ab1136566..803edd1a6401 100644 ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -1910,12 +1910,30 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -+ u32 icr; -+ bool enable = true; -+ -+ icr = er32(ICR); -+ if (icr & E1000_ICR_RXO) { -+ ew32(ICR, E1000_ICR_RXO); -+ enable = false; -+ /* napi poll will re-enable Other, make sure it runs */ -+ if (napi_schedule_prep(&adapter->napi)) { -+ adapter->total_rx_bytes = 0; -+ adapter->total_rx_packets = 0; -+ __napi_schedule(&adapter->napi); -+ } -+ } -+ if (icr & E1000_ICR_LSC) { -+ ew32(ICR, E1000_ICR_LSC); -+ hw->mac.get_link_status = true; -+ /* guard against interrupt when we're going down */ -+ if (!test_bit(__E1000_DOWN, &adapter->state)) { -+ mod_timer(&adapter->watchdog_timer, jiffies + 1); -+ } -+ } - -- hw->mac.get_link_status = true; -- -- /* guard against interrupt when we're going down */ -- if (!test_bit(__E1000_DOWN, &adapter->state)) { -- mod_timer(&adapter->watchdog_timer, jiffies + 1); -+ if (enable && !test_bit(__E1000_DOWN, &adapter->state)) { - ew32(IMS, E1000_IMS_OTHER); - } - -@@ -2687,7 +2705,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight) - napi_complete_done(napi, work_done); - if (!test_bit(__E1000_DOWN, &adapter->state)) { - if (adapter->msix_entries) -- ew32(IMS, adapter->rx_ring->ims_val); -+ ew32(IMS, adapter->rx_ring->ims_val | -+ E1000_IMS_OTHER); - else - e1000_irq_enable(adapter); - } -@@ -4204,7 +4223,7 @@ static void e1000e_trigger_lsc(struct e1000_adapter *adapter) - struct e1000_hw *hw = &adapter->hw; - - if (adapter->msix_entries) -- ew32(ICS, E1000_ICS_OTHER); -+ ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER); - else - ew32(ICS, E1000_ICS_LSC); - }