From: Denis Vlasenko Date: Mon, 17 Mar 2008 08:55:44 +0000 (-0000) Subject: help text: regularize format, and shrink X-Git-Tag: 1_10_0~50 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=397de617f38a58ca4659ee348faf1df574b3ec8d;p=oweals%2Fbusybox.git help text: regularize format, and shrink getty: shrink, and improve comments mount: OPT_ALL is superfluous, we already have OPT_a function old new delta bcode 47 25 -22 getty_main 2503 2349 -154 packed_usage 23928 23698 -230 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-406) Total: -406 bytes text data bss dec hex filename 798031 658 7428 806117 c4ce5 busybox_old 797604 658 7428 805690 c4b3a busybox_unstripped --- diff --git a/include/usage.h b/include/usage.h index 2a49454a1..f94fa2f62 100644 --- a/include/usage.h +++ b/include/usage.h @@ -14,48 +14,47 @@ #define __BB_USAGE_H__ #define addgroup_trivial_usage \ - "[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name" + "[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name" #define addgroup_full_usage \ - "Add a group"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \ - "\n\nOptions:\n" \ - " -g GID Group id" + "Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \ + "\nOptions:" \ + "\n -g GID Group id" #define adduser_trivial_usage \ "[OPTIONS] user_name" #define adduser_full_usage \ - "Add an user" \ - "\n\nOptions:\n" \ - " -h DIR Home directory\n" \ - " -g GECOS GECOS field\n" \ - " -s SHELL Login shell\n" \ - " -G GROUP Add user to existing group\n" \ - " -S Create a system user\n" \ - " -D Do not assign a password\n" \ - " -H Do not create home directory" + "Add an user\n" \ + "\nOptions:" \ + "\n -h DIR Home directory" \ + "\n -g GECOS GECOS field" \ + "\n -s SHELL Login shell" \ + "\n -G GROUP Add user to existing group" \ + "\n -S Create a system user" \ + "\n -D Do not assign a password" \ + "\n -H Do not create home directory" \ #define adjtimex_trivial_usage \ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage \ - "Read and optionally set system timebase parameters.\n" \ - "See adjtimex(2)." \ - "\n\nOptions:\n" \ - " -q Quiet\n" \ - " -o offset Time offset, microseconds\n" \ - " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \ - " (positive values make clock run faster)\n" \ - " -t tick Microseconds per tick, usually 10000\n" \ - " -p timeconstant" + "Read and optionally set system timebase parameters. See adjtimex(2).\n" \ + "\nOptions:" \ + "\n -q Quiet" \ + "\n -o offset Time offset, microseconds" \ + "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \ + "\n (positive values make clock run faster)" \ + "\n -t tick Microseconds per tick, usually 10000" \ + "\n -p timeconstant" \ #define ar_trivial_usage \ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" #define ar_full_usage \ - "Extract or list FILES from an ar archive" \ - "\n\nOptions:\n" \ - " -o Preserve original dates\n" \ - " -p Extract to stdout\n" \ - " -t List\n" \ - " -x Extract\n" \ - " -v Verbose" + "Extract or list FILES from an ar archive\n" \ + "\nOptions:" \ + "\n -o Preserve original dates" \ + "\n -p Extract to stdout" \ + "\n -t List" \ + "\n -x Extract" \ + "\n -v Verbose" \ #define arp_trivial_usage \ "\n" \ @@ -65,8 +64,8 @@ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" #define arp_full_usage \ - "Manipulate ARP cache" \ - "\n\nOptions:" \ + "Manipulate ARP cache\n" \ + "\nOptions:" \ "\n -a Display (all) hosts" \ "\n -s Set new ARP entry" \ "\n -d Delete a specified entry" \ @@ -75,24 +74,24 @@ "\n -i IF Network interface" \ "\n -D Read from given device" \ "\n -A, -p AF Protocol family" \ - "\n -H HWTYPE Hardware address type" + "\n -H HWTYPE Hardware address type" \ #define arping_trivial_usage \ "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target" #define arping_full_usage \ - "Ping hosts by ARP requests/replies" \ - "\n\nOptions:\n" \ - " -f Quit on first ARP reply\n" \ - " -q Quiet\n" \ - " -b Keep broadcasting, don't go unicast\n" \ - " -D Duplicated address detection mode\n" \ - " -U Unsolicited ARP mode, update your neighbors\n" \ - " -A ARP answer mode, update your neighbors\n" \ - " -c N Stop after sending N ARP requests\n" \ - " -w timeout Time to wait for ARP reply, in seconds\n" \ - " -I dev Interface to use (default eth0)\n" \ - " -s sender Sender IP address\n" \ - " target Target IP address" + "Send ARP requests/replies\n" \ + "\nOptions:" \ + "\n -f Quit on first ARP reply" \ + "\n -q Quiet" \ + "\n -b Keep broadcasting, don't go unicast" \ + "\n -D Duplicated address detection mode" \ + "\n -U Unsolicited ARP mode, update your neighbors" \ + "\n -A ARP answer mode, update your neighbors" \ + "\n -c N Stop after sending N ARP requests" \ + "\n -w timeout Time to wait for ARP reply, in seconds" \ + "\n -I dev Interface to use (default eth0)" \ + "\n -s sender Sender IP address" \ + "\n target Target IP address" \ #define ash_trivial_usage \ "[FILE]...\n" \ @@ -103,10 +102,10 @@ #define awk_trivial_usage \ "[OPTION]... [program-text] [FILE...]" #define awk_full_usage \ - "Options:\n" \ - " -v var=val Set variable\n" \ - " -F sep Use sep as field separator\n" \ - " -f file Read program from file" + "Options:" \ + "\n -v var=val Set variable" \ + "\n -F sep Use sep as field separator" \ + "\n -f file Read program from file" \ #define basename_trivial_usage \ "FILE [SUFFIX]" @@ -124,29 +123,29 @@ #define brctl_trivial_usage \ "COMMAND [BRIDGE [INTERFACE]]" #define brctl_full_usage \ - "Manage ethernet bridges." \ - "\n\nCommands:\n" \ - " addbr BRIDGE Create BRIDGE\n" \ - " delbr BRIDGE Delete BRIDGE\n" \ - " addif BRIDGE IFACE Add IFACE to BRIDGE\n" \ - " delif BRIDGE IFACE Delete IFACE from BRIDGE" \ -USE_FEATURE_BRCTL_FANCY("\n" \ - " setageing BRIDGE TIME Set ageing time\n" \ - " setfd BRIDGE TIME Set bridge forward delay\n" \ - " sethello BRIDGE TIME Set hello time\n" \ - " setmaxage BRIDGE TIME Set max message age\n" \ - " setpathcost BRIDGE COST Set path cost\n" \ - " setportprio BRIDGE PRIO Set port priority\n" \ - " setbridgeprio BRIDGE PRIO Set bridge priority\n" \ - " stp BRIDGE [1|0] STP on/off\n" \ -) + "Manage ethernet bridges.\n" \ + "\nCommands:" \ + "\n addbr BRIDGE Create BRIDGE" \ + "\n delbr BRIDGE Delete BRIDGE" \ + "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \ + "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \ + USE_FEATURE_BRCTL_FANCY( \ + "\n setageing BRIDGE TIME Set ageing time" \ + "\n setfd BRIDGE TIME Set bridge forward delay" \ + "\n sethello BRIDGE TIME Set hello time" \ + "\n setmaxage BRIDGE TIME Set max message age" \ + "\n setpathcost BRIDGE COST Set path cost" \ + "\n setportprio BRIDGE PRIO Set port priority" \ + "\n setbridgeprio BRIDGE PRIO Set bridge priority" \ + "\n stp BRIDGE [1|0] STP on/off" \ + ) #define bunzip2_trivial_usage \ "[OPTION]... [FILE]" #define bunzip2_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ - "\n\nOptions:\n" \ - " -c Write to standard output\n" \ - " -f Force" + "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ + "\nOptions:" \ + "\n -c Write to standard output" \ + "\n -f Force" \ #define bzip2_trivial_usage \ "[OPTION]... [FILE]..." @@ -157,7 +156,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n -c Write to standard output" \ "\n -d Decompress" \ "\n -f Force" \ - "\n -1..-9 Compression level" + "\n -1..-9 Compression level" \ #define busybox_notes_usage \ "Hello world!\n" @@ -170,10 +169,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define unlzma_trivial_usage \ "[OPTION]... [FILE]" #define unlzma_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ - "\n\nOptions:\n" \ - " -c Write to standard output\n" \ - " -f Force" + "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ + "\nOptions:" \ + "\n -c Write to standard output" \ + "\n -f Force" \ #define lzmacat_trivial_usage \ "FILE" @@ -183,17 +182,18 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define cal_trivial_usage \ "[-jy] [[month] year]" #define cal_full_usage \ - "Display a calendar" \ - "\n\nOptions:" \ - "\n -j Use julian dates" \ - "\n -y Display the entire year" + "Display a calendar\n" \ + "\nOptions:" \ + "\n -j Use julian dates" \ + "\n -y Display the entire year" \ #define cat_trivial_usage \ "[-u] [FILE]..." #define cat_full_usage \ - "Concatenate FILE(s) and print them to stdout" \ - "\n\nOptions:" \ - "\n -u Use unbuffered i/o (ignored)" + "Concatenate FILE(s) and print them to stdout\n" \ + "\nOptions:" \ + "\n -u Use unbuffered i/o (ignored)" \ + #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" @@ -201,11 +201,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define catv_trivial_usage \ "[-etv] [FILE]..." #define catv_full_usage \ - "Display nonprinting characters as ^x or M-x" \ - "\n\nOptions:\n" \ - " -e End each line with $\n" \ - " -t Show tabs as ^I\n" \ - " -v Don't use ^x or M-x escapes" + "Display nonprinting characters as ^x or M-x\n" \ + "\nOptions:" \ + "\n -e End each line with $" \ + "\n -t Show tabs as ^I" \ + "\n -v Don't use ^x or M-x escapes" \ #define chat_trivial_usage \ "EXPECT [SEND [EXPECT [SEND...]]]" @@ -218,26 +218,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define chattr_trivial_usage \ "[-R] [-+=AacDdijsStTu] [-v version] files..." #define chattr_full_usage \ - "Change file attributes on an ext2 fs\n\n" \ - "Modifiers:\n" \ - " - Remove attributes\n" \ - " + Add attributes\n" \ - " = Set attributes\n" \ - "Attributes:\n" \ - " A Don't track atime\n" \ - " a Append mode only\n" \ - " c Enable compress\n" \ - " D Write dir contents synchronously\n" \ - " d Do not backup with dump\n" \ - " i Cannot be modified (immutable)\n" \ - " j Write all data to journal first\n" \ - " s Zero disk storage when deleted\n" \ - " S Write file contents synchronously\n" \ - " t Disable tail-merging of partial blocks with other files\n" \ - " u Allow file to be undeleted\n" \ - "Options:\n" \ - " -R Recursively list subdirectories\n" \ - " -v Set the file's version/generation number" + "Change file attributes on an ext2 fs\n" \ + "\nModifiers:" \ + "\n - Remove attributes" \ + "\n + Add attributes" \ + "\n = Set attributes" \ + "\nAttributes:" \ + "\n A Don't track atime" \ + "\n a Append mode only" \ + "\n c Enable compress" \ + "\n D Write dir contents synchronously" \ + "\n d Do not backup with dump" \ + "\n i Cannot be modified (immutable)" \ + "\n j Write all data to journal first" \ + "\n s Zero disk storage when deleted" \ + "\n S Write file contents synchronously" \ + "\n t Disable tail-merging of partial blocks with other files" \ + "\n u Allow file to be undeleted" \ + "\nOptions:" \ + "\n -R Recursively list subdirectories" \ + "\n -v Set the file's version/generation number" \ #define chcon_trivial_usage \ "[OPTIONS] CONTEXT FILE..." \ @@ -248,41 +248,40 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define chcon_full_usage \ "Change the security context of each FILE to CONTEXT\n" \ USE_FEATURE_CHCON_LONG_OPTIONS( \ - "\n -v,--verbose Verbose" \ - "\n -c,--changes Report changes made" \ - "\n -h,--no-dereference Affect symlinks instead of their targets" \ - "\n -f,--silent,--quiet Suppress most error messages" \ - "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ - "\n -u,--user=USER Set user USER in the target security context" \ - "\n -r,--role=ROLE Set role ROLE in the target security context" \ - "\n -t,--type=TYPE Set type TYPE in the target security context" \ - "\n -l,--range=RANGE Set range RANGE in the target security context" \ - "\n -R,--recursive Recurse subdirectories" \ + "\n -v,--verbose Verbose" \ + "\n -c,--changes Report changes made" \ + "\n -h,--no-dereference Affect symlinks instead of their targets" \ + "\n -f,--silent,--quiet Suppress most error messages" \ + "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ + "\n -u,--user=USER Set user/role/type/range in the target" \ + "\n -r,--role=ROLE security context" \ + "\n -t,--type=TYPE" \ + "\n -l,--range=RANGE" \ + "\n -R,--recursive Recurse subdirectories" \ ) \ SKIP_FEATURE_CHCON_LONG_OPTIONS( \ - "\n -v Verbose" \ - "\n -c Report changes made" \ - "\n -h Affect symlinks instead of their targets" \ - "\n -f Suppress most error messages" \ - "\n -u USER Set user USER in the target security context" \ - "\n -r ROLE Set role ROLE in the target security context" \ - "\n -t TYPE Set type TYPE in the target security context" \ - "\n -l RNG Set range RNE in the target security context" \ - "\n -R Recurse subdirectories" \ + "\n -v Verbose" \ + "\n -c Report changes made" \ + "\n -h Affect symlinks instead of their targets" \ + "\n -f Suppress most error messages" \ + "\n -u USER Set user/role/type/range in the target security context" \ + "\n -r ROLE" \ + "\n -t TYPE" \ + "\n -l RNG" \ + "\n -R Recurse subdirectories" \ ) - #define chmod_trivial_usage \ "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." #define chmod_full_usage \ "Each MODE is one or more of the letters ugoa, one of the\n" \ - "symbols +-= and one or more of the letters rwxst" \ - "\n\nOptions:" \ - "\n -R Recurse directories" \ + "symbols +-= and one or more of the letters rwxst\n" \ + "\nOptions:" \ + "\n -R Recurse directories" \ USE_DESKTOP( \ - "\n -c List changed files" \ - "\n -v List all files" \ - "\n -f Hide errors" \ + "\n -c List changed files" \ + "\n -v List all files" \ + "\n -f Hide errors" \ ) #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ @@ -297,17 +296,17 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define chgrp_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..." #define chgrp_full_usage \ - "Change the group membership of each FILE to GROUP" \ - "\n\nOptions:" \ - "\n -R Recurse directories" \ - "\n -h Affect symlinks instead of symlink targets" \ - "\n -L Traverse all symlinks to directories" \ - "\n -H Traverse symlinks on command line only" \ - "\n -P Do not traverse symlinks (default)" \ + "Change the group membership of each FILE to GROUP\n" \ + "\nOptions:" \ + "\n -R Recurse directories" \ + "\n -h Affect symlinks instead of symlink targets" \ + "\n -L Traverse all symlinks to directories" \ + "\n -H Traverse symlinks on command line only" \ + "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ - "\n -c List changed files" \ - "\n -v Verbose" \ - "\n -f Hide errors" \ + "\n -c List changed files" \ + "\n -v Verbose" \ + "\n -f Hide errors" \ ) #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ @@ -319,17 +318,17 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define chown_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage \ - "Change the owner and/or group of each FILE to OWNER and/or GROUP" \ - "\n\nOptions:" \ - "\n -R Recurse directories" \ - "\n -h Affect symlinks instead of symlink targets" \ - "\n -L Traverse all symlinks to directories" \ - "\n -H Traverse symlinks on command line only" \ - "\n -P Do not traverse symlinks (default)" \ + "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \ + "\nOptions:" \ + "\n -R Recurse directories" \ + "\n -h Affect symlinks instead of symlink targets" \ + "\n -L Traverse all symlinks to directories" \ + "\n -H Traverse symlinks on command line only" \ + "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ - "\n -c List changed files" \ - "\n -v List all files" \ - "\n -f Hide errors" \ + "\n -c List changed files" \ + "\n -v List all files" \ + "\n -f Hide errors" \ ) #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ @@ -346,26 +345,27 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ "[-p processes] [-f bytes] [-c bytes] prog args" #define chpst_full_usage \ - "Change the process state and run specified program" \ - "\n\nOptions:\n" \ - " -u user[:grp] Set uid and gid\n" \ - " -U user[:grp] Set environment variables UID and GID\n" \ - " -e dir Set environment variables as specified by files\n" \ - " in the directory: file=1st_line_of_file\n" \ - " -/ dir Chroot to dir\n" \ - " -n inc Add inc to nice value\n" \ - " -m bytes Limit data segment, stack segment, locked physical pages,\n" \ - " and total of all segment per process to bytes bytes each\n" \ - " -d bytes Limit data segment\n" \ - " -o n Limit the number of open file descriptors per process to n\n" \ - " -p n Limit number of processes per uid to n\n" \ - " -f bytes Limit output file size to bytes bytes\n" \ - " -c bytes Limit core file size to bytes bytes\n" \ - " -v Verbose\n" \ - " -P Run prog in a new process group\n" \ - " -0 Close standard input\n" \ - " -1 Close standard output\n" \ - " -2 Close standard error" + "Change the process state and run specified program\n" \ + "\nOptions:" \ + "\n -u USER[:GRP] Set uid and gid" \ + "\n -U USER[:GRP] Set $UID and $GID in environment" \ + "\n -e DIR Set environment variables as specified by files" \ + "\n in DIR: file=1st_line_of_file" \ + "\n -/ DIR Chroot to DIR" \ + "\n -n INC Add INC to nice value" \ + "\n -m BYTES Limit data segment, stack segment, locked physical pages," \ + "\n and total of all segment per process to BYTES each" \ + "\n -d BYTES Limit data segment" \ + "\n -o N Limit the number of open file descriptors per process to N" \ + "\n -p N Limit number of processes per uid to N" \ + "\n -f BYTES Limit output file size to BYTES" \ + "\n -c BYTES Limit core file size to BYTES" \ + "\n -v Verbose" \ + "\n -P Run prog in a new process group" \ + "\n -0 Close standard input" \ + "\n -1 Close standard output" \ + "\n -2 Close standard error" \ + #define setuidgid_trivial_usage \ "account prog args" #define setuidgid_full_usage \ @@ -385,26 +385,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \ "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args" #define softlimit_full_usage \ - "Set soft resource limits, then run prog" \ - "\n\nOptions:\n" \ - " -m n Same as -d n -s n -l n -a n\n" \ - " -d n Limit the data segment per process to n bytes\n" \ - " -s n Limit the stack segment per process to n bytes\n" \ - " -l n Limit the locked physical pages per process to n bytes\n" \ - " -a n Limit the total of all segments per process to n bytes\n" \ - " -o n Limit the number of open file descriptors per process to n\n" \ - " -p n Limit the number of processes per uid to n\n" \ - "Options controlling file sizes:\n" \ - " -f n Limit output file sizes to n bytes\n" \ - " -c n Limit core file sizes to n bytes\n" \ - "Efficiency opts:\n" \ - " -r n Limit the resident set size to n bytes. This limit is not\n" \ - " enforced unless physical memory is full\n" \ - " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \ - " except that the process receives a SIGXCPU signal after n seconds\n" \ - "\n" \ - "Some options may have no effect on some operating systems\n" \ - "n may be =, indicating that soft limit should be set equal to hard limit" + "Set soft resource limits, then run prog\n" \ + "\nOptions:" \ + "\n -m n Same as -d n -s n -l n -a n" \ + "\n -d n Limit the data segment per process to n bytes" \ + "\n -s n Limit the stack segment per process to n bytes" \ + "\n -l n Limit the locked physical pages per process to n bytes" \ + "\n -a n Limit the total of all segments per process to n bytes" \ + "\n -o n Limit the number of open file descriptors per process to n" \ + "\n -p n Limit the number of processes per uid to n" \ + "\nOptions controlling file sizes:" \ + "\n -f n Limit output file sizes to n bytes" \ + "\n -c n Limit core file sizes to n bytes" \ + "\nEfficiency opts:" \ + "\n -r n Limit the resident set size to n bytes. This limit is not" \ + "\n enforced unless physical memory is full" \ + "\n -t n Limit the CPU time to n seconds. This limit is not enforced" \ + "\n except that the process receives a SIGXCPU signal after n seconds" \ + "\n" \ + "\nSome options may have no effect on some operating systems" \ + "\nn may be =, indicating that soft limit should be set equal to hard limit" \ #define chroot_trivial_usage \ "NEWROOT [COMMAND...]" @@ -436,20 +436,20 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define cmp_trivial_usage \ "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]" #define cmp_full_usage \ - "Compares FILE1 vs stdin if FILE2 is not specified" \ - "\n\nOptions:\n" \ - " -l Write the byte numbers (decimal) and values (octal)\n" \ - " for all differing bytes\n" \ - " -s Quiet" + "Compares FILE1 vs stdin if FILE2 is not specified\n" \ + "\nOptions:" \ + "\n -l Write the byte numbers (decimal) and values (octal)" \ + "\n for all differing bytes" \ + "\n -s Quiet" \ #define comm_trivial_usage \ "[-123] FILE1 FILE2" #define comm_full_usage \ - "Compare FILE1 to FILE2, or to stdin if - is specified" \ - "\n\nOptions:\n" \ - " -1 Suppress lines unique to FILE1\n" \ - " -2 Suppress lines unique to FILE2\n" \ - " -3 Suppress lines common to both files" + "Compare FILE1 to FILE2, or to stdin if - is specified\n" \ + "\nOptions:" \ + "\n -1 Suppress lines unique to FILE1" \ + "\n -2 Suppress lines unique to FILE2" \ + "\n -3 Suppress lines common to both files" \ #define bbconfig_trivial_usage \ "" @@ -465,13 +465,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define chrt_trivial_usage \ "[OPTION]... [prio] [pid | command [arg]...]" #define chrt_full_usage \ - "manipulate real-time attributes of a process" \ - "\n\nOptions:\n" \ - " -p operate on pid\n" \ - " -r set scheduling policy to SCHED_RR\n" \ - " -f set scheduling policy to SCHED_FIFO\n" \ - " -o set scheduling policy to SCHED_OTHER\n" \ - " -m show min and max priorities" + "Manipulate real-time attributes of a process\n" \ + "\nOptions:" \ + "\n -p Operate on pid" \ + "\n -r Set scheduling policy to SCHED_RR" \ + "\n -f Set scheduling policy to SCHED_FIFO" \ + "\n -o Set scheduling policy to SCHED_OTHER" \ + "\n -m Show min and max priorities" \ #define chrt_example_usage \ "$ chrt -r 4 sleep 900; x=$!\n" \ @@ -481,45 +481,45 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define cp_trivial_usage \ "[OPTION]... SOURCE DEST" #define cp_full_usage \ - "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \ - "\n\nOptions:" \ - "\n -a Same as -dpR" \ + "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \ + "\nOptions:" \ + "\n -a Same as -dpR" \ USE_SELINUX( \ - "\n -c Preserves security context" \ + "\n -c Preserve security context" \ ) \ - "\n -d,-P Preserve links" \ - "\n -H,-L Dereference all symlinks (default)" \ - "\n -p Preserve file attributes if possible" \ - "\n -f Force overwrite" \ - "\n -i Prompt before overwrite" \ - "\n -R,-r Recurse directories" \ - "\n -l,-s Create (sym)links" + "\n -d,-P Preserve links" \ + "\n -H,-L Dereference all symlinks (default)" \ + "\n -p Preserve file attributes if possible" \ + "\n -f Force overwrite" \ + "\n -i Prompt before overwrite" \ + "\n -R,-r Recurse directories" \ + "\n -l,-s Create (sym)links" \ #define cpio_trivial_usage \ "-[dimtuv][F cpiofile]" #define cpio_full_usage \ "Extract or list files from a cpio archive\n" \ - "Main operation mode:\n" \ - " d Make leading directories\n" \ - " i Extract\n" \ - " m Preserve mtime\n" \ - " t List\n" \ - " v Verbose\n" \ - " u Unconditional overwrite\n" \ - " F Input from file" + "Main operation mode:" \ + "\n d Make leading directories" \ + "\n i Extract" \ + "\n m Preserve mtime" \ + "\n t List" \ + "\n v Verbose" \ + "\n u Unconditional overwrite" \ + "\n F Input from file" \ #define crond_trivial_usage \ "-fbS -l N " USE_DEBUG_CROND_OPTION("-d N ") "-L LOGFILE -c DIR" #define crond_full_usage \ - " -f Foreground\n" \ - " -b Background (default)\n" \ - " -S Log to syslog (default)\n" \ - " -l Set log level. 0 is the most verbose, default 8\n" \ + " -f Foreground" \ + "\n -b Background (default)" \ + "\n -S Log to syslog (default)" \ + "\n -l Set log level. 0 is the most verbose, default 8" \ USE_DEBUG_CROND_OPTION( \ - " -d Set log level, log to stderr\n" \ + "\n -d Set log level, log to stderr" \ ) \ - " -L Log to file\n" \ - " -c Working dir" + "\n -L Log to file" \ + "\n -c Working dir" \ #define crontab_trivial_usage \ "[-c DIR] [-u USER] [-ler]|[FILE]" @@ -534,22 +534,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define cryptpw_trivial_usage \ "[-a des|md5] [string]" #define cryptpw_full_usage \ - "Outputs crypted string.\n" \ - "If string isn't supplied on cmdline, reads it from stdin.\n" \ - "\nOptions:" \ - "\n -a Algorithm to use (default: md5)" + "Output crypted string.\n" \ + "If string isn't supplied on cmdline, read it from stdin.\n" \ + "\nOptions:" \ + "\n -a Algorithm to use (default: md5)" \ #define cut_trivial_usage \ "[OPTION]... [FILE]..." #define cut_full_usage \ - "Print selected fields from each input FILE to standard output" \ - "\n\nOptions:\n" \ - " -b LIST Output only bytes from LIST\n" \ - " -c LIST Output only characters from LIST\n" \ - " -d CHAR Use CHAR instead of tab as the field delimiter\n" \ - " -s Output only the lines containing delimiter\n" \ - " -f N Print only these fields\n" \ - " -n Ignored" + "Print selected fields from each input FILE to standard output\n" \ + "\nOptions:" \ + "\n -b LIST Output only bytes from LIST" \ + "\n -c LIST Output only characters from LIST" \ + "\n -d CHAR Use CHAR instead of tab as the field delimiter" \ + "\n -s Output only the lines containing delimiter" \ + "\n -f N Print only these fields" \ + "\n -n Ignored" \ + #define cut_example_usage \ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ "Hello\n" \ @@ -559,20 +560,21 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define date_trivial_usage \ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" #define date_full_usage \ - "Display current time in the given FORMAT, or set system date" \ - "\n\nOptions:\n" \ - " -R Outputs RFC-822 compliant date string\n" \ - " -d STRING Displays time described by STRING, not 'now'\n" \ + "Display current time in the given FORMAT, or set system date\n" \ + "\nOptions:" \ + "\n -R Output RFC-822 compliant date string" \ + "\n -d STRING Display time described by STRING, not 'now'" \ USE_FEATURE_DATE_ISOFMT( \ - " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \ - " TIMESPEC='date' (or missing) for date only,\n" \ - " 'hours', 'minutes', or 'seconds' for date and\n" \ - " time to the indicated precision\n" \ - " -D hint Use 'hint' as date format, via strptime()\n" \ + "\n -I[TIMESPEC] Output an ISO-8601 compliant date/time string" \ + "\n TIMESPEC='date' (or missing) for date only," \ + "\n 'hours', 'minutes', or 'seconds' for date and" \ + "\n time to the indicated precision" \ + "\n -D hint Use 'hint' as date format, via strptime()" \ ) \ - " -s STRING Sets time described by STRING\n" \ - " -r FILE Displays the last modification time of FILE\n" \ - " -u Prints or sets Coordinated Universal Time" + "\n -s STRING Set time described by STRING" \ + "\n -r FILE Display the last modification time of FILE" \ + "\n -u Print or sets Coordinated Universal Time" \ + #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" @@ -580,15 +582,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define dc_trivial_usage \ "expression..." #define dc_full_usage \ - "This is a Tiny RPN calculator that understands the\n" \ - "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ - "**, exp, and, or, not, eor.\n" \ - "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \ - "\n\nOptions:\n" \ - "p - Prints the value on the top of the stack, without altering the stack\n" \ - "f - Prints the entire contents of the stack without altering anything\n" \ - "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ - " Only 10 and 16 are supported" + "This is a Tiny RPN calculator that understands the following operations:\n" \ + "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor.\n" \ + "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \ + "\nOptions:" \ + "\np - Print the value on the top of the stack, without altering the stack" \ + "\nf - Print the entire contents of the stack without altering anything" \ + "\no - Pop the value off the top of the stack and use it to set the output radix" \ + "\n Only 10 and 16 are supported" \ + #define dc_example_usage \ "$ dc 2 2 + p\n" \ "4\n" \ @@ -605,25 +607,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") #define dd_full_usage \ - "Copy a file with converting and formatting" \ - "\n\nOptions:\n" \ - " if=FILE Read from FILE instead of stdin\n" \ - " of=FILE Write to FILE instead of stdout\n" \ - " bs=N Read and write N bytes at a time\n" \ + "Copy a file with converting and formatting\n" \ + "\nOptions:" \ + "\n if=FILE Read from FILE instead of stdin" \ + "\n of=FILE Write to FILE instead of stdout" \ + "\n bs=N Read and write N bytes at a time" \ USE_FEATURE_DD_IBS_OBS( \ - " ibs=N Read N bytes at a time\n") \ + "\n ibs=N Read N bytes at a time") \ USE_FEATURE_DD_IBS_OBS( \ - " obs=N Write N bytes at a time\n") \ - " count=N Copy only N input blocks\n" \ - " skip=N Skip N input blocks\n" \ - " seek=N Skip N output blocks\n" \ + "\n obs=N Write N bytes at a time") \ + "\n count=N Copy only N input blocks" \ + "\n skip=N Skip N input blocks" \ + "\n seek=N Skip N output blocks" \ USE_FEATURE_DD_IBS_OBS( \ - " conv=notrunc Don't truncate output file\n" \ - " conv=noerror Continue after read errors\n" \ - " conv=sync Pad blocks with zeros\n") \ - "\n" \ - "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ - "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" + "\n conv=notrunc Don't truncate output file" \ + "\n conv=noerror Continue after read errors" \ + "\n conv=sync Pad blocks with zeros") \ + "\n" \ + "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \ + "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \ + #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ @@ -646,19 +649,19 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Delete user USER from the system" #define devfsd_trivial_usage \ - "mntpnt [-v]" \ - USE_DEVFSD_FG_NP("[-fg][-np]") + "mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]") #define devfsd_full_usage \ - "Manage devfs permissions and old device name symlinks" \ - "\n\nOptions:" \ - "\n mntpnt The mount point where devfs is mounted" \ - "\n -v Print the protocol version numbers for devfsd" \ - "\n and the kernel-side protocol version and exit" \ + "Manage devfs permissions and old device name symlinks\n" \ + "\nOptions:" \ + "\n mntpnt The mount point where devfs is mounted" \ + "\n -v Print the protocol version numbers for devfsd" \ + "\n and the kernel-side protocol version and exit" \ USE_DEVFSD_FG_NP( \ - "\n -fg Run in foreground" \ - "\n -np Exit after parsing the configuration file" \ - "\n and processing synthetic REGISTER events," \ - "\n do not poll for events") + "\n -fg Run in foreground" \ + "\n -np Exit after parsing the configuration file" \ + "\n and processing synthetic REGISTER events," \ + "\n do not poll for events" \ + ) /* -k is accepted but ignored for !HUMAN_READABLE, * but we won't mention this (unimportant) */ @@ -672,15 +675,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \ DF_HAS_OPTIONS("] ") "[FILESYSTEM...]" #define df_full_usage \ - "Print filesystem usage statistics" \ - DF_HAS_OPTIONS("\n\nOptions:") \ + "Print filesystem usage statistics\n" \ + DF_HAS_OPTIONS("\nOptions:") \ USE_FEATURE_HUMAN_READABLE( \ - "\n -h Human readable (e.g. 1K 243M 2G)" \ - "\n -m 1024*1024 blocks" \ - "\n -k 1024 blocks" \ + "\n -h Human readable (e.g. 1K 243M 2G)" \ + "\n -m 1024*1024 blocks" \ + "\n -k 1024 blocks" \ ) \ USE_FEATURE_DF_INODE( \ - "\n -i Inodes" \ + "\n -i Inodes" \ ) #define df_example_usage \ "$ df\n" \ @@ -705,22 +708,22 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" #define diff_full_usage \ "Compare files line by line and output the differences between them.\n" \ - "This diff implementation only supports unified diffs." \ - "\n\nOptions:\n" \ - " -a Treat all files as text\n" \ - " -b Ignore changes in the amount of whitespace\n" \ - " -d Try hard to find a smaller set of changes\n" \ - " -i Ignore case differences\n" \ - " -L Use LABEL instead of the filename in the unified header\n" \ - " -N Treat absent files as empty\n" \ - " -q Output only whether files differ\n" \ - " -r Recursively compare subdirectories\n" \ - " -S Start with FILE when comparing directories\n" \ - " -T Make tabs line up by prefixing a tab when necessary\n" \ - " -s Report when two files are the same\n" \ - " -t Expand tabs to spaces in output\n" \ - " -U Output LINES lines of context\n" \ - " -w Ignore all whitespace" + "This implementation supports unified diffs only.\n" \ + "\nOptions:" \ + "\n -a Treat all files as text" \ + "\n -b Ignore changes in the amount of whitespace" \ + "\n -d Try hard to find a smaller set of changes" \ + "\n -i Ignore case differences" \ + "\n -L Use LABEL instead of the filename in the unified header" \ + "\n -N Treat absent files as empty" \ + "\n -q Output only whether files differ" \ + "\n -r Recursively compare subdirectories" \ + "\n -S Start with FILE when comparing directories" \ + "\n -T Make tabs line up by prefixing a tab when necessary" \ + "\n -s Report when two files are the same" \ + "\n -t Expand tabs to spaces in output" \ + "\n -U Output LINES lines of context" \ + "\n -w Ignore all whitespace" \ #define dirname_trivial_usage \ "FILENAME" @@ -735,22 +738,22 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage \ - "Print or control the kernel ring buffer" \ - "\n\nOptions:\n" \ - " -c Clear ring buffer after printing\n" \ - " -n LEVEL Set console logging level\n" \ - " -s SIZE Buffer size" + "Print or control the kernel ring buffer\n" \ + "\nOptions:" \ + "\n -c Clear ring buffer after printing" \ + "\n -n LEVEL Set console logging level" \ + "\n -s SIZE Buffer size" \ #define dnsd_trivial_usage \ "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" #define dnsd_full_usage \ - "Small static DNS server daemon" \ - "\n\nOptions:\n" \ - " -c Config filename\n" \ - " -t TTL in seconds\n" \ - " -p Listening port\n" \ - " -i Listening ip (default all)\n" \ - " -d Daemonize" + "Small static DNS server daemon\n" \ + "\nOptions:" \ + "\n -c Config filename" \ + "\n -t TTL in seconds" \ + "\n -p Listening port" \ + "\n -i Listening ip (default all)" \ + "\n -d Daemonize" \ #define dos2unix_trivial_usage \ "[option] [FILE]" @@ -759,31 +762,32 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "When no file is given, use stdin/stdout.\n" \ "\nOptions:" \ "\n -u dos2unix" \ - "\n -d unix2dos" + "\n -d unix2dos" \ #define dpkg_trivial_usage \ "[-ilCPru] [-F option] package_name" #define dpkg_full_usage \ - "Install, remove and manage Debian packages" \ - "\n\nOptions:\n" \ - " -i Install the package\n" \ - " -l List of installed packages\n" \ - " -C Configure an unpackaged package\n" \ - " -F depends Ignore dependency problems\n" \ - " -P Purge all files of a package\n" \ - " -r Remove all but the configuration files for a package\n" \ - " -u Unpack a package, but don't configure it" + "Install, remove and manage Debian packages\n" \ + "\nOptions:" \ + "\n -i Install the package" \ + "\n -l List of installed packages" \ + "\n -C Configure an unpackaged package" \ + "\n -F depends Ignore dependency problems" \ + "\n -P Purge all files of a package" \ + "\n -r Remove all but the configuration files for a package" \ + "\n -u Unpack a package, but don't configure it" \ #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [argument]" #define dpkg_deb_full_usage \ - "Perform actions on Debian packages (.debs)" \ - "\n\nOptions:\n" \ - " -c List contents of filesystem tree\n" \ - " -e Extract control files to [argument] directory\n" \ - " -f Display control field name starting with [argument]\n" \ - " -x Extract packages filesystem tree to directory\n" \ - " -X Verbose extract" + "Perform actions on Debian packages (.debs)\n" \ + "\nOptions:" \ + "\n -c List contents of filesystem tree" \ + "\n -e Extract control files to [argument] directory" \ + "\n -f Display control field name starting with [argument]" \ + "\n -x Extract packages filesystem tree to directory" \ + "\n -X Verbose extract" \ + #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" @@ -794,22 +798,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Disk space is printed in units of " \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ - " bytes." \ - "\n\nOptions:\n" \ - " -a Show file sizes too\n" \ - " -H Follow symlinks on command line\n" \ - " -L Follow all symlinks\n" \ - " -d N Limit output to directories (and files with -a) of depth < N\n" \ - " -c Show grand total\n" \ - " -l Count sizes many times if hard linked\n" \ - " -s Display only a total for each argument\n" \ - " -x Skip directories on different filesystems\n" \ + " bytes.\n" \ + "\nOptions:" \ + "\n -a Show file sizes too" \ + "\n -H Follow symlinks on command line" \ + "\n -L Follow all symlinks" \ + "\n -d N Limit output to directories (and files with -a) of depth < N" \ + "\n -c Show grand total" \ + "\n -l Count sizes many times if hard linked" \ + "\n -s Display only a total for each argument" \ + "\n -x Skip directories on different filesystems" \ USE_FEATURE_HUMAN_READABLE( \ - " -h Sizes in human readable format (e.g., 1K 243M 2G )\n" \ - " -m Sizes in megabytes\n" \ + "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \ + "\n -m Sizes in megabytes" \ ) \ - " -k Sizes in kilobytes" \ - USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)") + "\n -k Sizes in kilobytes" \ + USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \ + #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ @@ -833,17 +838,17 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage \ - "Display DHCP leases granted by udhcpd" \ - "\n\nOptions:\n" \ + "Display DHCP leases granted by udhcpd\n" \ + "\nOptions:" \ USE_GETOPT_LONG( \ - " -f,--file=FILE Leases file to load\n" \ - " -r,--remaining Interpret lease times as time remaining\n" \ - " -a,--absolute Interpret lease times as expire time" \ + "\n -f,--file=FILE Leases file to load" \ + "\n -r,--remaining Interpret lease times as time remaining" \ + "\n -a,--absolute Interpret lease times as expire time" \ ) \ SKIP_GETOPT_LONG( \ - " -f FILE Leases file to load\n" \ - " -r Interpret lease times as time remaining\n" \ - " -a Interpret lease times as expire time" \ + "\n -f FILE Leases file to load" \ + "\n -r Interpret lease times as time remaining" \ + "\n -a Interpret lease times as expire time" \ ) #define e2fsck_trivial_usage \ @@ -852,29 +857,29 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ "[-E extended-options] device" #define e2fsck_full_usage \ - "Check ext2/ext3 file system" \ - "\n\nOptions:\n" \ - " -p Automatic repair (no questions)\n" \ - " -n Make no changes to the filesystem\n" \ - " -y Assume 'yes' to all questions\n" \ - " -c Check for bad blocks and add them to the badblock list\n" \ - " -f Force checking even if filesystem is marked clean\n" \ - " -v Verbose\n" \ - " -b superblock Use alternative superblock\n" \ - " -B blocksize Force blocksize when looking for superblock\n" \ - " -j journal Set location of the external journal\n" \ - " -l file Add to badblocks list\n" \ - " -L file Set badblocks list" + "Check ext2/ext3 file system\n" \ + "\nOptions:" \ + "\n -p Automatic repair (no questions)" \ + "\n -n Make no changes to the filesystem" \ + "\n -y Assume 'yes' to all questions" \ + "\n -c Check for bad blocks and add them to the badblock list" \ + "\n -f Force checking even if filesystem is marked clean" \ + "\n -v Verbose" \ + "\n -b superblock Use alternative superblock" \ + "\n -B blocksize Force blocksize when looking for superblock" \ + "\n -j journal Set location of the external journal" \ + "\n -l file Add to badblocks list" \ + "\n -L file Set badblocks list" \ #define echo_trivial_usage \ USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]" #define echo_full_usage \ "Print the specified ARGs to stdout" \ - USE_FEATURE_FANCY_ECHO( \ - "\n\nOptions:\n" \ - " -n Suppress trailing newline\n" \ - " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \ - " -E Disable interpretation of backslash-escaped characters" \ + USE_FEATURE_FANCY_ECHO( "\n" \ + "\nOptions:" \ + "\n -n Suppress trailing newline" \ + "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \ + "\n -E Disable interpretation of backslash-escaped characters" \ ) #define echo_example_usage \ "$ echo \"Erik is cool\"\n" \ @@ -889,13 +894,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" #define eject_full_usage \ - "Eject specified DEVICE (or default /dev/cdrom)" \ - "\n\nOptions:\n" \ - USE_FEATURE_EJECT_SCSI( \ - " -s scsi device\n" \ - ) \ - " -t Close tray\n" \ - " -T Open/close tray (toggle)" + "Eject specified DEVICE (or default /dev/cdrom)\n" \ + "\nOptions:" \ + USE_FEATURE_EJECT_SCSI( \ + "\n -s SCSI device" \ + ) \ + "\n -t Close tray" \ + "\n -T Open/close tray (toggle)" \ #define ed_trivial_usage "" #define ed_full_usage "" @@ -904,40 +909,41 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-iu] [-] [name=value]... [command]" #define env_full_usage \ "Print the current environment or run a program after setting\n" \ - "up the specified environment" \ - "\n\nOptions:\n" \ - " -, -i Start with an empty environment\n" \ - " -u Remove variable from the environment" + "up the specified environment\n" \ + "\nOptions:" \ + "\n -, -i Start with an empty environment" \ + "\n -u Remove variable from the environment" \ #define ether_wake_trivial_usage \ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" #define ether_wake_full_usage \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ - "a hostname with a known 'ethers' entry." \ - "\n\nOptions:\n" \ - " -b Send wake-up packet to the broadcast address\n" \ - " -i iface Use interface ifname instead of the default \"eth0\"\n" \ - " -p pass Append the four or six byte password PW to the packet" + "a hostname with a known 'ethers' entry.\n" \ + "\nOptions:" \ + "\n -b Send wake-up packet to the broadcast address" \ + "\n -i iface Interface to use (default eth0)" \ + "\n -p pass Append four or six byte password PW to the packet" \ #define expand_trivial_usage \ "[-i] [-t NUM] [FILE|-]" #define expand_full_usage \ - "Convert tabs to spaces, writing to standard output." \ - "\n\nOptions:" \ + "Convert tabs to spaces, writing to standard output.\n" \ + "\nOptions:" \ USE_FEATURE_EXPAND_LONG_OPTIONS( \ - "\n -i,--initial Do not convert tabs after non blanks" \ - "\n -t,--tabs=N Tabstops every N chars" \ + "\n -i,--initial Do not convert tabs after non blanks" \ + "\n -t,--tabs=N Tabstops every N chars" \ ) \ SKIP_FEATURE_EXPAND_LONG_OPTIONS( \ - "\n -i Do not convert tabs after non blanks" \ - "\n -t Tabstops every N chars" \ + "\n -i Do not convert tabs after non blanks" \ + "\n -t Tabstops every N chars" \ ) #define expr_trivial_usage \ "EXPRESSION" #define expr_full_usage \ - "Print the value of EXPRESSION to standard output.\n\n" \ + "Print the value of EXPRESSION to standard output.\n" \ + "\n" \ "EXPRESSION may be:\n" \ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ @@ -960,7 +966,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " quote TOKEN Interpret TOKEN as a string, even if\n" \ " it is a keyword like 'match' or an\n" \ " operator like '/'\n" \ - " (EXPRESSION) Value of EXPRESSION\n\n" \ + " (EXPRESSION) Value of EXPRESSION\n" \ + "\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between\n" \ @@ -970,13 +977,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define fakeidentd_trivial_usage \ "[-fiw] [-b ADDR] [STRING]" #define fakeidentd_full_usage \ - "Provide fake ident (auth) service" \ - "\n\nOptions:" \ - "\n -f Run in foreground" \ - "\n -i Inetd mode" \ - "\n -w Inetd 'wait' mode" \ - "\n -b ADDR Bind to specified address" \ - "\n STRING Ident answer string (default is 'nobody')" + "Provide fake ident (auth) service\n" \ + "\nOptions:" \ + "\n -f Run in foreground" \ + "\n -i Inetd mode" \ + "\n -w Inetd 'wait' mode" \ + "\n -b ADDR Bind to specified address" \ + "\n STRING Ident answer string (default is 'nobody')" \ #define false_trivial_usage \ "" @@ -991,6 +998,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[options] [mode]" #define fbset_full_usage \ "Show and modify frame buffer settings" + #define fbset_example_usage \ "$ fbset\n" \ "mode \"1024x768-76\"\n" \ @@ -1009,9 +1017,9 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define fdformat_trivial_usage \ "[-n] DEVICE" #define fdformat_full_usage \ - "Format floppy disk" \ - "\n\nOptions:\n" \ - " -n Don't verify after format" + "Format floppy disk\n" \ + "\nOptions:" \ + "\n -n Don't verify after format" \ /* Looks like someone forgot to add this to config system */ #ifndef ENABLE_FEATURE_FDISK_BLKSIZE @@ -1038,15 +1046,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define fetchmail_trivial_usage \ "[-w timeout] [-U user] -P password [-X] [-t] [-z] server[:port] maildir [prog]" #define fetchmail_full_usage \ - "Fetch content of remote mailbox to local Maildir." \ - "\n\nOptions:\n" \ - " -w timeout Set timeout on network operations\n" \ - " -U username Authenticate with specified username/password\n" \ - " -P password\n" \ - " -X Use openssl connection helper for secured servers\n" \ - " -t Get only headers\n" \ - " -z Delete messages on server\n" \ - " prog Run prog on message delivery" + "Fetch content of remote mailbox to local Maildir.\n" \ + "\nOptions:" \ + "\n -w timeout Set timeout on network operations" \ + "\n -U username Authenticate with specified username/password" \ + "\n -P password" \ + "\n -X Use openssl connection helper for secured servers" \ + "\n -t Get only headers" \ + "\n -z Delete messages on server" \ + "\n prog Run prog on message delivery" \ #define findfs_trivial_usage \ "LABEL=label or UUID=uuid" @@ -1121,11 +1129,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-bs] [-w WIDTH] [FILE]" #define fold_full_usage \ "Wrap input lines in each FILE (standard input by default), writing to\n" \ - "standard output" \ - "\n\nOptions:\n" \ - " -b Count bytes rather than columns\n" \ - " -s Break at spaces\n" \ - " -w Use WIDTH columns instead of 80" + "standard output\n" \ + "\nOptions:" \ + "\n -b Count bytes rather than columns" \ + "\n -s Break at spaces" \ + "\n -w Use WIDTH columns instead of 80" \ #define free_trivial_usage \ "" @@ -1148,66 +1156,66 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define fsck_trivial_usage \ "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]" #define fsck_full_usage \ - "Check and repair filesystems" \ - "\n\nOptions:\n" \ - " -A Walk /etc/fstab and check all filesystems\n" \ - " -N Don't execute, just show what would be done\n" \ - " -P When using -A, check filesystems in parallel\n" \ - " -R When using -A, skip the root filesystem\n" \ - " -T Don't show title on startup\n" \ - " -V Verbose\n" \ - " -C n Write status information to specified filedescriptor\n" \ - " -t type List of filesystem types to check" + "Check and repair filesystems\n" \ + "\nOptions:" \ + "\n -A Walk /etc/fstab and check all filesystems" \ + "\n -N Don't execute, just show what would be done" \ + "\n -P With -A, check filesystems in parallel" \ + "\n -R With -A, skip the root filesystem" \ + "\n -T Don't show title on startup" \ + "\n -V Verbose" \ + "\n -C n Write status information to specified filedescriptor" \ + "\n -t type List of filesystem types to check" \ #define fsck_minix_trivial_usage \ "[-larvsmf] /dev/name" #define fsck_minix_full_usage \ - "Perform a consistency check for MINIX filesystems" \ - "\n\nOptions:\n" \ - " -l List all filenames\n" \ - " -r Perform interactive repairs\n" \ - " -a Perform automatic repairs\n" \ - " -v Verbose\n" \ - " -s Output super-block information\n" \ - " -m Activate MINIX-like \"mode not cleared\" warnings\n" \ - " -f Force file system check" + "Perform a consistency check for MINIX filesystems\n" \ + "\nOptions:" \ + "\n -l List all filenames" \ + "\n -r Perform interactive repairs" \ + "\n -a Perform automatic repairs" \ + "\n -v Verbose" \ + "\n -s Output super-block information" \ + "\n -m Activate MINIX-like \"mode not cleared\" warnings" \ + "\n -f Force file system check" \ #define ftpget_trivial_usage \ "[options] remote-host local-file remote-file" #define ftpget_full_usage \ - "Retrieve a remote file via FTP" \ - "\n\nOptions:\n" \ + "Retrieve a remote file via FTP\n" \ + "\nOptions:" \ USE_GETOPT_LONG( \ - " -c,--continue Continue previous transfer\n" \ - " -v,--verbose Verbose\n" \ - " -u,--username Username\n" \ - " -p,--password Password\n" \ - " -P,--port Port number" \ + "\n -c,--continue Continue previous transfer" \ + "\n -v,--verbose Verbose" \ + "\n -u,--username Username" \ + "\n -p,--password Password" \ + "\n -P,--port Port number" \ ) \ SKIP_GETOPT_LONG( \ - " -c Continue previous transfer\n" \ - " -v Verbose\n" \ - " -u Username\n" \ - " -p Password\n" \ - " -P Port number" \ + "\n -c Continue previous transfer" \ + "\n -v Verbose" \ + "\n -u Username" \ + "\n -p Password" \ + "\n -P Port number" \ ) #define ftpput_trivial_usage \ "[options] remote-host remote-file local-file" #define ftpput_full_usage \ - "Store a local file on a remote machine via FTP" \ - "\n\nOptions:\n" \ + "Store a local file on a remote machine via FTP\n" \ + "\nOptions:" \ USE_GETOPT_LONG( \ - " -v,--verbose Verbose\n" \ - " -u,--username Username\n" \ - " -p,--password Password\n" \ - " -P,--port Port number" \ + "\n -v,--verbose Verbose" \ + "\n -u,--username Username" \ + "\n -p,--password Password" \ + "\n -P,--port Port number" \ ) \ SKIP_GETOPT_LONG( \ - " -v Verbose\n" \ - " -u Username\n" \ - " -p Password\n" \ - " -P Port number" \ + "\n -v Verbose" \ + "\n -u Username" \ + "\n -p Password" \ + "\n -P Port number" \ ) #define fuser_trivial_usage \ @@ -1220,7 +1228,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n -6 Search only IPv6 space" \ "\n -s Silent: just exit with 0 if any processes are found" \ "\n -k Kill found processes (otherwise display PIDs)" \ - "\n -SIGNAL Signal to send (default: TERM)" + "\n -SIGNAL Signal to send (default: TERM)" \ #define getenforce_trivial_usage #define getenforce_full_usage @@ -1230,26 +1238,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define getopt_full_usage \ "Parse command options\n" \ USE_GETOPT_LONG( \ - " -a,--alternative Allow long options starting with single -\n" \ - " -l,--longoptions=longopts Long options to be recognized\n" \ - " -n,--name=progname The name under which errors are reported\n" \ - " -o,--options=optstring Short options to be recognized\n" \ - " -q,--quiet Disable error reporting by getopt(3)\n" \ - " -Q,--quiet-output No normal output\n" \ - " -s,--shell=shell Set shell quoting conventions\n" \ - " -T,--test Test for getopt(1) version\n" \ - " -u,--unquoted Don't quote the output" \ + "\n -a,--alternative Allow long options starting with single -" \ + "\n -l,--longoptions=longopts Long options to be recognized" \ + "\n -n,--name=progname The name under which errors are reported" \ + "\n -o,--options=optstring Short options to be recognized" \ + "\n -q,--quiet Disable error reporting by getopt(3)" \ + "\n -Q,--quiet-output No normal output" \ + "\n -s,--shell=shell Set shell quoting conventions" \ + "\n -T,--test Test for getopt(1) version" \ + "\n -u,--unquoted Don't quote the output" \ ) \ SKIP_GETOPT_LONG( \ - " -a Allow long options starting with single -\n" \ - " -l longopts Long options to be recognized\n" \ - " -n progname The name under which errors are reported\n" \ - " -o optstring Short options to be recognized\n" \ - " -q Disable error reporting by getopt(3)\n" \ - " -Q No normal output\n" \ - " -s shell Set shell quoting conventions\n" \ - " -T Test for getopt(1) version\n" \ - " -u Don't quote the output" \ + "\n -a Allow long options starting with single -" \ + "\n -l longopts Long options to be recognized" \ + "\n -n progname The name under which errors are reported" \ + "\n -o optstring Short options to be recognized" \ + "\n -q Disable error reporting by getopt(3)" \ + "\n -Q No normal output" \ + "\n -s shell Set shell quoting conventions" \ + "\n -T Test for getopt(1) version" \ + "\n -u Don't quote the output" \ ) #define getopt_example_usage \ "$ cat getopt.test\n" \ @@ -1278,21 +1286,21 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " -a Show all SELinux booleans" #define getty_trivial_usage \ - "[OPTIONS]... baud_rate,... line [termtype]" + "[OPTIONS] BAUD_RATE TTY [TERMTYPE]" #define getty_full_usage \ - "Open a tty, prompt for a login name, then invoke /bin/login" \ - "\n\nOptions:\n" \ - " -h Enable hardware (RTS/CTS) flow control\n" \ - " -i Do not display /etc/issue before running login\n" \ - " -L Local line, do not do carrier detect\n" \ - " -m Get baud rate from modem's CONNECT status message\n" \ - " -w Wait for a CR or LF before sending /etc/issue\n" \ - " -n Do not prompt the user for a login name\n" \ - " -f issue_file Display issue_file instead of /etc/issue\n" \ - " -l login_app Invoke login_app instead of /bin/login\n" \ - " -t timeout Terminate after timeout if no username is read\n" \ - " -I initstring Sets the init string to send before anything else\n" \ - " -H login_host Log login_host into the utmp file as the hostname" + "Open a tty, prompt for a login name, then invoke /bin/login\n" \ + "\nOptions:" \ + "\n -h Enable hardware (RTS/CTS) flow control" \ + "\n -i Do not display /etc/issue before running login" \ + "\n -L Local line, do not do carrier detect" \ + "\n -m Get baud rate from modem's CONNECT status message" \ + "\n -w Wait for a CR or LF before sending /etc/issue" \ + "\n -n Do not prompt the user for a login name" \ + "\n -f issue_file Display issue_file instead of /etc/issue" \ + "\n -l login_app Invoke login_app instead of /bin/login" \ + "\n -t timeout Terminate after timeout if no username is read" \ + "\n -I initstring Init string to send before anything else" \ + "\n -H login_host Log login_host into the utmp file as the hostname" \ #define grep_trivial_usage \ "[-HhrilLnqvso" \ @@ -1302,32 +1310,32 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_GREP_CONTEXT("ABC") \ "] PATTERN [FILEs...]" #define grep_full_usage \ - "Search for PATTERN in each FILE or standard input" \ - "\n\nOptions:" \ - "\n -H Prefix output lines with filename where match was found" \ - "\n -h Suppress the prefixing filename on output" \ - "\n -r Recurse subdirectories" \ - "\n -i Ignore case distinctions" \ - "\n -l List names of files that match" \ - "\n -L List names of files that do not match" \ - "\n -n Print line number with output lines" \ - "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \ - "\n -v Select non-matching lines" \ - "\n -s Suppress file open/read error messages" \ - "\n -c Only print count of matching lines" \ - "\n -o Show only the part of a line that matches PATTERN" \ - "\n -m MAX Match up to MAX times per file" \ + "Search for PATTERN in each FILE or standard input\n" \ + "\nOptions:" \ + "\n -H Prefix output lines with filename where match was found" \ + "\n -h Suppress the prefixing filename on output" \ + "\n -r Recurse subdirectories" \ + "\n -i Ignore case distinctions" \ + "\n -l List names of files that match" \ + "\n -L List names of files that do not match" \ + "\n -n Print line number with output lines" \ + "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ + "\n -v Select non-matching lines" \ + "\n -s Suppress file open/read error messages" \ + "\n -c Only print count of matching lines" \ + "\n -o Show only the part of a line that matches PATTERN" \ + "\n -m MAX Match up to MAX times per file" \ USE_DESKTOP( \ - "\n -w Match whole words only") \ - "\n -F PATTERN is a set of newline-separated strings" \ + "\n -w Match whole words only") \ + "\n -F PATTERN is a set of newline-separated strings" \ USE_FEATURE_GREP_EGREP_ALIAS( \ - "\n -E PATTERN is an extended regular expression") \ - "\n -e PTRN Pattern to match" \ - "\n -f FILE Read pattern from file" \ + "\n -E PATTERN is an extended regular expression") \ + "\n -e PTRN Pattern to match" \ + "\n -f FILE Read pattern from file" \ USE_FEATURE_GREP_CONTEXT( \ - "\n -A Print NUM lines of trailing context" \ - "\n -B Print NUM lines of leading context" \ - "\n -C Print NUM lines of output context") \ + "\n -A Print NUM lines of trailing context" \ + "\n -B Print NUM lines of leading context" \ + "\n -C Print NUM lines of output context") \ #define grep_example_usage \ "$ grep root /etc/passwd\n" \ @@ -1336,13 +1344,14 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "root:x:0:0:root:/root:/bin/bash\n" #define gunzip_trivial_usage \ - "[OPTION]... FILE" + "[OPTION]... [FILE]..." #define gunzip_full_usage \ - "Uncompress FILE (or standard input if FILE is '-')" \ - "\n\nOptions:\n" \ - " -c Write to standard output\n" \ - " -f Force\n" \ - " -t Test file integrity" + "Uncompress FILEs (or standard input)\n" \ + "\nOptions:" \ + "\n -c Write to standard output" \ + "\n -f Force" \ + "\n -t Test file integrity" \ + #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ @@ -1353,12 +1362,12 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define gzip_trivial_usage \ "[OPTION]... [FILE]..." #define gzip_full_usage \ - "Compress FILE(s) with maximum compression.\n" \ - "When FILE is '-' or unspecified, reads standard input. Implies -c." \ - "\n\nOptions:\n" \ - " -c Write to standard output\n" \ - " -d Decompress\n" \ - " -f Force" + "Compress FILEs (or standard input)\n" \ + "\nOptions:" \ + "\n -c Write to standard output" \ + "\n -d Decompress" \ + "\n -f Force" \ + #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ @@ -1369,80 +1378,79 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define halt_trivial_usage \ "[-d delay] [-n] [-f]" #define halt_full_usage \ - "Halt the system" \ - "\n\nOptions:" \ - "\n -d Delay interval for halting" \ - "\n -n No call to sync()" \ - "\n -f Force halt (don't go through init)" \ + "Halt the system\n" \ + "\nOptions:" \ + "\n -d Delay interval for halting" \ + "\n -n No call to sync()" \ + "\n -f Force halt (don't go through init)" \ USE_FEATURE_WTMP( \ - "\n -w Only write a wtmp record" \ + "\n -w Only write a wtmp record" \ ) #define hdparm_trivial_usage \ "[options] [device] .." #define hdparm_full_usage \ - USE_FEATURE_HDPARM_GET_IDENTITY( \ - "If no device name is specified try to read from stdin.\n\n") \ - "Options:\n" \ - " -a Get/set fs readahead\n" \ - " -A Set drive read-lookahead flag (0/1)\n" \ - " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ - " -B Set Advanced Power Management setting (1-255)\n" \ - " -c Get/set IDE 32-bit IO setting\n" \ - " -C Check IDE power mode status\n" \ + "Options:" \ + "\n -a Get/set fs readahead" \ + "\n -A Set drive read-lookahead flag (0/1)" \ + "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \ + "\n -B Set Advanced Power Management setting (1-255)" \ + "\n -c Get/set IDE 32-bit IO setting" \ + "\n -C Check IDE power mode status" \ USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ - " -d Get/set using_dma flag\n") \ - " -D Enable/disable drive defect-mgmt\n" \ - " -f Flush buffer cache for device on exit\n" \ - " -g Display drive geometry\n" \ - " -h Display terse usage information\n" \ + "\n -d Get/set using_dma flag") \ + "\n -D Enable/disable drive defect-mgmt" \ + "\n -f Flush buffer cache for device on exit" \ + "\n -g Display drive geometry" \ + "\n -h Display terse usage information" \ USE_FEATURE_HDPARM_GET_IDENTITY( \ - " -i Display drive identification\n") \ + "\n -i Display drive identification") \ USE_FEATURE_HDPARM_GET_IDENTITY( \ - " -I Detailed/current information directly from drive\n") \ - " -k Get/set keep_settings_over_reset flag (0/1)\n" \ - " -K Set drive keep_features_over_reset flag (0/1)\n" \ - " -L Set drive doorlock (0/1) (removable harddisks only)\n" \ - " -m Get/set multiple sector count\n" \ - " -n Get/set ignore-write-errors flag (0/1)\n" \ - " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ - " -P Set drive prefetch count\n" \ - " -q Change next setting quietly\n" \ - " -Q Get/set DMA tagged-queuing depth (if supported)\n" \ - " -r Get/set readonly flag (DANGEROUS to set)\n" \ + "\n -I Detailed/current information directly from drive") \ + "\n -k Get/set keep_settings_over_reset flag (0/1)" \ + "\n -K Set drive keep_features_over_reset flag (0/1)" \ + "\n -L Set drive doorlock (0/1) (removable harddisks only)" \ + "\n -m Get/set multiple sector count" \ + "\n -n Get/set ignore-write-errors flag (0/1)" \ + "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \ + "\n -P Set drive prefetch count" \ + "\n -q Change next setting quietly" \ + "\n -Q Get/set DMA tagged-queuing depth (if supported)" \ + "\n -r Get/set readonly flag (DANGEROUS to set)" \ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ - " -R Register an IDE interface (DANGEROUS)\n") \ - " -S Set standby (spindown) timeout\n" \ - " -t Perform device read timings\n" \ - " -T Perform cache read timings\n" \ - " -u Get/set unmaskirq flag (0/1)\n" \ + "\n -R Register an IDE interface (DANGEROUS)") \ + "\n -S Set standby (spindown) timeout" \ + "\n -t Perform device read timings" \ + "\n -T Perform cache read timings" \ + "\n -u Get/set unmaskirq flag (0/1)" \ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ - " -U Un-register an IDE interface (DANGEROUS)\n") \ - " -v Defaults; same as -mcudkrag for IDE drives\n" \ - " -V Display program version and exit immediately\n" \ + "\n -U Un-register an IDE interface (DANGEROUS)") \ + "\n -v Defaults; same as -mcudkrag for IDE drives" \ + "\n -V Display program version and exit immediately" \ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ - " -w Perform device reset (DANGEROUS)\n") \ - " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \ + "\n -w Perform device reset (DANGEROUS)") \ + "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ - " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \ - " -X Set IDE xfer mode (DANGEROUS)\n" \ - " -y Put IDE drive in standby mode\n" \ - " -Y Put IDE drive to sleep\n" \ - " -Z Disable Seagate auto-powersaving mode\n" \ - " -z Re-read partition table" + "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \ + "\n -X Set IDE xfer mode (DANGEROUS)" \ + "\n -y Put IDE drive in standby mode" \ + "\n -Y Put IDE drive to sleep" \ + "\n -Z Disable Seagate auto-powersaving mode" \ + "\n -z Re-read partition table" \ #define head_trivial_usage \ "[OPTION]... [FILE]..." #define head_full_usage \ "Print first 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input." \ - "\n\nOptions:" \ - "\n -n NUM Print first NUM lines instead of first 10" \ + "file name. With no FILE, or when FILE is -, read standard input.\n" \ + "\nOptions:" \ + "\n -n NUM Print first NUM lines instead of first 10" \ USE_FEATURE_FANCY_HEAD( \ - "\n -c NUM Output the first NUM bytes" \ - "\n -q Never output headers giving file names" \ - "\n -v Always output headers giving file names") + "\n -c NUM Output the first NUM bytes" \ + "\n -q Never output headers giving file names" \ + "\n -v Always output headers giving file names") \ + #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ @@ -1451,8 +1459,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define hexdump_trivial_usage \ "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..." #define hexdump_full_usage \ - "Display file(s) or standard input in a user specified format" \ - "\n\nOptions:" \ + "Display file(s) or standard input in a user specified format\n" \ + "\nOptions:" \ "\n -b One-byte octal display" \ "\n -c One-byte character display" \ "\n -C Canonical hex+ASCII, 16 bytes per line" \ @@ -1478,16 +1486,16 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Print out a unique 32-bit identifier for the machine" #define hostname_trivial_usage \ - "[OPTION] {hostname | -F FILE}" + "[OPTION] [hostname | -F FILE]" #define hostname_full_usage \ - "Get or set the hostname or DNS domain name. If a hostname is given\n" \ - "(or FILE with the -F parameter), the host name will be set." \ - "\n\nOptions:\n" \ - " -s Short\n" \ - " -i Addresses for the hostname\n" \ - " -d DNS domain name\n" \ - " -f Fully qualified domain name\n" \ - " -F FILE Use the contents of FILE to specify the hostname" + "Get or set hostname or DNS domain name\n" \ + "\nOptions:" \ + "\n -s Short" \ + "\n -i Addresses for the hostname" \ + "\n -d DNS domain name" \ + "\n -f Fully qualified domain name" \ + "\n -F FILE Use the contents of FILE to specify the hostname" \ + #define hostname_example_usage \ "$ hostname\n" \ "sage\n" @@ -1502,22 +1510,22 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " [-h home]" \ " [-d/-e string]" #define httpd_full_usage \ - "Listen for incoming HTTP requests" \ - "\n\nOptions:" \ - "\n -c FILE Configuration file (default httpd.conf)" \ - "\n -p [IP:]PORT Bind to ip:port (default *:80)" \ - "\n -i Inetd mode" \ - "\n -f Do not daemonize" \ - "\n -v[v] Verbose" \ + "Listen for incoming HTTP requests\n" \ + "\nOptions:" \ + "\n -c FILE Configuration file (default httpd.conf)" \ + "\n -p [IP:]PORT Bind to ip:port (default *:80)" \ + "\n -i Inetd mode" \ + "\n -f Do not daemonize" \ + "\n -v[v] Verbose" \ USE_FEATURE_HTTPD_SETUID( \ - "\n -u USER[:GRP] Set uid/gid after binding to port") \ + "\n -u USER[:GRP] Set uid/gid after binding to port") \ USE_FEATURE_HTTPD_BASIC_AUTH( \ - "\n -r REALM Authentication Realm for Basic Authentication") \ + "\n -r REALM Authentication Realm for Basic Authentication") \ USE_FEATURE_HTTPD_AUTH_MD5( \ - "\n -m PASS Crypt PASS with md5 algorithm") \ - "\n -h HOME Home directory (default .)" \ - "\n -e STRING HTML encode STRING" \ - "\n -d STRING URL decode STRING" \ + "\n -m PASS Crypt PASS with md5 algorithm") \ + "\n -h HOME Home directory (default .)" \ + "\n -e STRING HTML encode STRING" \ + "\n -d STRING URL decode STRING" \ #define hwclock_trivial_usage \ USE_GETOPT_LONG( \ @@ -1529,27 +1537,28 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \ ) #define hwclock_full_usage \ - "Query and set a hardware clock (RTC)" \ - "\n\nOptions:\n" \ - " -r Show time from hardware clock\n" \ - " -s Set system time from hardware clock\n" \ - " -w Set hardware clock to system time\n" \ - " -u Hardware clock is in UTC\n" \ - " -l Hardware clock is in local time\n" \ - " -f FILE Use specified device (e.g. /dev/rtc2)" + "Query and set hardware clock (RTC)\n" \ + "\nOptions:" \ + "\n -r Show time from hardware clock" \ + "\n -s Set system time from hardware clock" \ + "\n -w Set hardware clock to system time" \ + "\n -u Hardware clock is in UTC" \ + "\n -l Hardware clock is in local time" \ + "\n -f FILE Use specified device (e.g. /dev/rtc2)" \ #define id_trivial_usage \ - "[OPTIONS]... [USERNAME]" + "[OPTIONS]... [USER]" #define id_full_usage \ - "Print information for USERNAME or the current user" \ - "\n\nOptions:\n" \ + "Print information about USER or the current user\n" \ + "\nOptions:" \ USE_SELINUX( \ - " -Z Prints only the security context\n" \ + "\n -Z Print the security context" \ ) \ - " -g Prints only the group ID\n" \ - " -u Prints only the user ID\n" \ - " -n Print a name instead of a number\n" \ - " -r Prints the real user ID instead of the effective ID" + "\n -g Print group ID" \ + "\n -u Print user ID" \ + "\n -n Print name instead of a number" \ + "\n -r Print real user ID instead of effective ID" \ + #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" @@ -1557,8 +1566,9 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define ifconfig_trivial_usage \ USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]" #define ifconfig_full_usage \ - "Configure a network interface" \ - "\n\nOptions:\n" \ + "Configure a network interface\n" \ + "\nOptions:" \ + "\n" \ USE_FEATURE_IPV6( \ " [add ADDRESS[/PREFIXLEN]]\n") \ USE_FEATURE_IPV6( \ @@ -1577,12 +1587,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define ifenslave_trivial_usage \ "[-cdf] master-iface " #define ifenslave_full_usage \ - "Configure network interfaces for parallel routing\n\n" \ - "Options:" \ + "Configure network interfaces for parallel routing\n" \ + "\nOptions:" \ "\n -c, --change-active Change active slave" \ "\n -d, --detach Remove slave interface from bonding device" \ "\n -f, --force Force, even if interface is not Ethernet" \ /* "\n -r, --receive-slave Create a receive-only slave" */ + #define ifenslave_example_usage \ "To create a bond device, simply follow these three steps :\n" \ "- ensure that the required drivers are properly loaded :\n" \ @@ -1598,31 +1609,31 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " To set the bond device down and automatically release all the slaves :\n" \ " # ifconfig bond0 down\n\n" \ " To change active slave :\n" \ - " # ifenslave -c bond0 eth0\n" + " # ifenslave -c bond0 eth0\n" \ #define ifup_trivial_usage \ "[-ahinv] ifaces..." #define ifup_full_usage \ - "Options:\n" \ - " -a De/configure all interfaces automatically\n" \ - " -i FILE Use FILE for interface definitions\n" \ - " -n Print out what would happen, but don't do it\n" \ - " (note: doesn't disable mappings)\n" \ - " -v Print out what would happen before doing it\n" \ - " -m Don't run any mappings\n" \ - " -f Force de/configuration" + "Options:" \ + "\n -a De/configure all interfaces automatically" \ + "\n -i FILE Use FILE for interface definitions" \ + "\n -n Print out what would happen, but don't do it" \ + "\n (note: doesn't disable mappings)" \ + "\n -v Print out what would happen before doing it" \ + "\n -m Don't run any mappings" \ + "\n -f Force de/configuration" \ #define ifdown_trivial_usage \ "[-ahinv] ifaces..." #define ifdown_full_usage \ - "Options:\n" \ - " -a De/configure all interfaces automatically\n" \ - " -i FILE Use FILE for interface definitions\n" \ - " -n Print out what would happen, but don't do it\n" \ - " (note: doesn't disable mappings)\n" \ - " -v Print out what would happen before doing it\n" \ - " -m Don't run any mappings\n" \ - " -f Force de/configuration" + "Options:" \ + "\n -a De/configure all interfaces automatically" \ + "\n -i FILE Use FILE for interface definitions" \ + "\n -n Print out what would happen, but don't do it" \ + "\n (note: doesn't disable mappings)" \ + "\n -v Print out what would happen before doing it" \ + "\n -m Don't run any mappings" \ + "\n -f Force de/configuration" \ #define inetd_trivial_usage \ "[-fe] [-q N] [-R N] [CONFFILE]" @@ -1633,12 +1644,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n -e Log to stderr" \ "\n -q N Socket listen queue (default: 128)" \ "\n -R N Pause services after N connects/min" \ - "\n (default: 0 - disabled)" + "\n (default: 0 - disabled)" \ #define init_trivial_usage \ "" #define init_full_usage \ "Init is the parent of all processes" + #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ @@ -1770,36 +1782,37 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..." #define insmod_full_usage \ "Load the specified kernel modules into the kernel" \ - USE_FEATURE_2_4_MODULES( \ - "\n\nOptions:\n" \ - " -f Force module to load into the wrong kernel version\n" \ - " -k Make module autoclean-able\n" \ - " -v Verbose\n" \ - " -q Quiet\n" \ - " -L Lock to prevent simultaneous loads of a module\n" \ + USE_FEATURE_2_4_MODULES( "\n" \ + "\nOptions:" \ + "\n -f Force module to load into the wrong kernel version" \ + "\n -k Make module autoclean-able" \ + "\n -v Verbose" \ + "\n -q Quiet" \ + "\n -L Lock to prevent simultaneous loads of a module" \ USE_FEATURE_INSMOD_LOAD_MAP( \ - " -m Output load map to stdout\n" \ + "\n -m Output load map to stdout" \ ) \ - " -o NAME Set internal module name to NAME\n" \ - " -x Do not export externs" \ + "\n -o NAME Set internal module name to NAME" \ + "\n -x Do not export externs" \ ) #define install_trivial_usage \ "[-cgmops] [sources] dest|directory" #define install_full_usage \ - "Copy files and set attributes" \ - "\n\nOptions:\n" \ - " -c Copy the file, default\n" \ - " -d Create directories\n" \ - " -g Set group ownership\n" \ - " -m Set permissions\n" \ - " -o Set ownership\n" \ - " -p Preserve date\n" \ - " -s Strip symbol tables" \ + "Copy files and set attributes\n" \ + "\nOptions:" \ + "\n -c Copy the file, default" \ + "\n -d Create directories" \ + "\n -g Set group ownership" \ + "\n -m Set permissions" \ + "\n -o Set ownership" \ + "\n -p Preserve date" \ + "\n -s Strip symbol tables" \ USE_SELINUX( \ - "\n -Z Set security context of copy" \ + "\n -Z Set security context of copy" \ ) -/* would need to make the " | " optional depending on more than one selected */ + +/* would need to make the " | " optional depending on more than one selected: */ #define ip_trivial_usage \ "[OPTIONS] {" \ USE_FEATURE_IP_ADDRESS("address | ") \ @@ -1817,7 +1830,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_IP_TUNNEL("tunnel | ") \ USE_FEATURE_IP_RULE("rule") \ "}\n" \ - "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" + "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \ #define ipaddr_trivial_usage \ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ @@ -1829,60 +1842,59 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " IFADDR := PREFIX | ADDR peer PREFIX\n" \ " [broadcast ADDR] [anycast ADDR]\n" \ " [label STRING] [scope SCOPE-ID]\n" \ - " SCOPE-ID := [host | link | global | NUMBER]" + " SCOPE-ID := [host | link | global | NUMBER]" \ #define ipcalc_trivial_usage \ "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]" #define ipcalc_full_usage \ - "Calculate IP network settings from a IP address" \ - "\n\nOptions:" \ + "Calculate IP network settings from a IP address\n" \ + "\nOptions:" \ USE_FEATURE_IPCALC_LONG_OPTIONS( \ - "\n -b,--broadcast Display calculated broadcast address" \ - "\n -n,--network Display calculated network address" \ - "\n -m,--netmask Display default netmask for IP" \ + "\n -b,--broadcast Display calculated broadcast address" \ + "\n -n,--network Display calculated network address" \ + "\n -m,--netmask Display default netmask for IP" \ USE_FEATURE_IPCALC_FANCY( \ - "\n -p,--prefix Display the prefix for IP/NETMASK" \ - "\n -h,--hostname Display first resolved host name" \ - "\n -s,--silent Don't ever display error messages" \ + "\n -p,--prefix Display the prefix for IP/NETMASK" \ + "\n -h,--hostname Display first resolved host name" \ + "\n -s,--silent Don't ever display error messages" \ ) \ ) \ SKIP_FEATURE_IPCALC_LONG_OPTIONS( \ - "\n -b Display calculated broadcast address" \ - "\n -n Display calculated network address" \ - "\n -m Display default netmask for IP" \ + "\n -b Display calculated broadcast address" \ + "\n -n Display calculated network address" \ + "\n -m Display default netmask for IP" \ USE_FEATURE_IPCALC_FANCY( \ - "\n -p Display the prefix for IP/NETMASK" \ - "\n -h Display first resolved host name" \ - "\n -s Don't ever display error messages" \ + "\n -p Display the prefix for IP/NETMASK" \ + "\n -h Display first resolved host name" \ + "\n -s Don't ever display error messages" \ ) \ ) #define ipcrm_trivial_usage \ - "[-[MQS] key] [-[mqs] id]" + "[-MQS key] [-mqs id]" #define ipcrm_full_usage \ - "The upper-case options MQS are used to remove a shared memory segment by a\n" \ - "segment by a shmkey value. The lower-case options mqs are used\n" \ - "to remove a segment by shmid value.\n" \ - "\n\nOptions:\n" \ - " -[mM] Remove the memory segment after the last detach\n" \ - " -[qQ] Remove the message queue\n" \ - " -[sS] Remove the semaphore" + "Upper-case options MQS remove an object by shmkey value.\n" \ + "Lower-case options remove an object by shmid value.\n" \ + "\nOptions:" \ + "\n -mM Remove memory segment after last detach" \ + "\n -qQ Remove message queue" \ + "\n -sS Remove semaphore" \ #define ipcs_trivial_usage \ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" #define ipcs_full_usage \ - " -i Show a specific resource\n" \ - "Resource specification:\n" \ - " -m Shared memory segments\n" \ - " -q Message queues\n" \ - " -s Semaphore arrays\n" \ - " -a All (default)\n" \ - "Output format:\n" \ - " -t Time\n" \ - " -c Creator\n" \ - " -p Pid\n" \ - " -l Limits\n" \ - " -u Summary" + " -i Show specific resource" \ + "\nResource specification:" \ + "\n -m Shared memory segments" \ + "\n -q Message queues" \ + "\n -s Semaphore arrays" \ + "\n -a All (default)" \ + "\nOutput format:" \ + "\n -t Time" \ + "\n -c Creator" \ + "\n -p Pid" \ + "\n -l Limits" \ + "\n -u Summary" \ #define iplink_trivial_usage \ "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }" @@ -1890,7 +1902,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ " dynamic { on | off } |\n" \ " mtu MTU }\n" \ - "iplink show [DEVICE]" + "iplink show [DEVICE]" \ #define iproute_trivial_usage \ "{ list | flush | { add | del | change | append |\n" \ @@ -1901,7 +1913,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " [oif STRING] [tos TOS]\n" \ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ - " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" + " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" \ #define iprule_trivial_usage \ "{[list | add | del] RULE}" @@ -1912,7 +1924,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \ " [prohibit | reject | unreachable]\n" \ " [realms [SRCREALM/]DSTREALM]\n" \ - " TABLE_ID := [local | main | default | NUMBER]" + " TABLE_ID := [local | main | default | NUMBER]" \ #define iptunnel_trivial_usage \ "{ add | change | del | show } [NAME]\n" \ @@ -1922,24 +1934,25 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "iptunnel { add | change | del | show } [NAME]\n" \ " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ - " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" + " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \ #define kbd_mode_trivial_usage \ "[-a|k|s|u]" #define kbd_mode_full_usage \ - "Report or set the keyboard mode" \ - "\n\nOptions set mode:\n" \ - " -a Default (ASCII)\n" \ - " -k Medium-raw (keyboard)\n" \ - " -s Raw (scancode)\n" \ - " -u Unicode (utf-8)" + "Report or set the keyboard mode\n" \ + "\nOptions set mode:" \ + "\n -a Default (ASCII)" \ + "\n -k Medium-raw (keyboard)" \ + "\n -s Raw (scancode)" \ + "\n -u Unicode (utf-8)" \ #define kill_trivial_usage \ - "[-l] [-signal] process-id [process-id...]" + "[-l] [-signal] process-id..." #define kill_full_usage \ - "Send a signal (default is TERM) to the specified process(es)" \ - "\n\nOptions:\n" \ - " -l List all signal names and numbers" + "Send a signal (default is TERM) to the specified process(es)\n" \ + "\nOptions:" \ + "\n -l List all signal names and numbers" \ + #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ @@ -1951,34 +1964,36 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "$ kill 252\n" #define killall_trivial_usage \ - "[-l] [-q] [-signal] process-name [process-name...]" + "[-l] [-q] [-signal] process-name..." #define killall_full_usage \ - "Send a signal (default is TERM) to the specified process(es)" \ - "\n\nOptions:\n" \ - " -l List all signal names and numbers\n" \ - " -q Do not complain if no processes were killed" + "Send a signal (default is TERM) to the specified process(es)\n" \ + "\nOptions:" \ + "\n -l List all signal names and numbers" \ + "\n -q Do not complain if no processes were killed" \ + #define killall_example_usage \ "$ killall apache\n" #define killall5_trivial_usage \ "[-l] [-signal]" #define killall5_full_usage \ - "Send a signal (default is TERM) to all processes outside current session" \ - "\n\nOptions:\n" \ - " -l List all signal names and numbers\n" \ + "Send a signal (default is TERM) to all processes outside current session\n" \ + "\nOptions:" \ + "\n -l List all signal names and numbers" \ #define klogd_trivial_usage \ "[-c n] [-n]" #define klogd_full_usage \ - "Kernel logger" \ - "\n\nOptions:\n" \ - " -c n Sets the default log level of console messages to n\n" \ - " -n Run in foreground" + "Kernel logger\n" \ + "\nOptions:" \ + "\n -c n Set the default log level of console messages to n" \ + "\n -n Run in foreground" \ #define length_trivial_usage \ "STRING" #define length_full_usage \ - "Print out the length of the specified STRING" + "Print STRING's length" + #define length_example_usage \ "$ length Hello\n" \ "5\n" @@ -1987,32 +2002,33 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-EMNmh~?] [FILE...]" #define less_full_usage \ "View a file or list of files. The position within files can be\n" \ - "changed, and files can be manipulated in various ways." \ - "\n\nOptions:\n" \ - " -E Quit once the end of a file is reached\n" \ - " -M,-m Display a status line containing the line numbers\n" \ - " and percentage through the file\n" \ - " -N Prefix line numbers to each line\n" \ - " -~ Suppress ~s displayed past the end of the file" \ + "changed, and files can be manipulated in various ways.\n" \ + "\nOptions:" \ + "\n -E Quit once the end of a file is reached" \ + "\n -M,-m Display a status line containing the line numbers" \ + "\n and percentage through the file" \ + "\n -N Prefix line numbers to each line" \ + "\n -~ Suppress ~s displayed past the end of the file" \ #define setarch_trivial_usage \ "personality program [args...]" #define setarch_full_usage \ "Personality may be:\n" \ " linux32 Set 32bit uname emulation\n" \ - " linux64 Set 64bit uname emulation" + " linux64 Set 64bit uname emulation" \ #define ln_trivial_usage \ "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage \ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ - "You may use '--' to indicate that all following arguments are non-options." \ - "\n\nOptions:\n" \ - " -s Make symlinks instead of hardlinks\n" \ - " -f Remove existing destination files\n" \ - " -n Don't dereference symlinks - treat like normal file\n" \ - " -b Make a backup of the target (if exists) before link operation\n" \ - " -S suf Use suffix instead of ~ when making backup files" + "Use '--' to indicate that all following arguments are non-options.\n" \ + "\nOptions:" \ + "\n -s Make symlinks instead of hardlinks" \ + "\n -f Remove existing destination files" \ + "\n -n Don't dereference symlinks - treat like normal file" \ + "\n -b Make a backup of the target (if exists) before link operation" \ + "\n -S suf Use suffix instead of ~ when making backup files" \ + #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ @@ -2039,11 +2055,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define logger_trivial_usage \ "[OPTION]... [MESSAGE]" #define logger_full_usage \ - "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \ - "\n\nOptions:\n" \ - " -s Log to stderr as well as the system log\n" \ - " -t TAG Log using the specified tag (defaults to user name)\n" \ - " -p PRIO Priority (numeric or facility.level pair)" + "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \ + "\nOptions:" \ + "\n -s Log to stderr as well as the system log" \ + "\n -t TAG Log using the specified tag (defaults to user name)" \ + "\n -p PRIO Priority (numeric or facility.level pair)" \ #define logger_example_usage \ "$ logger \"hello\"\n" @@ -2051,11 +2067,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define login_trivial_usage \ "[-p] [-h HOST] [[-f] USER]" #define login_full_usage \ - "Begin a new session on the system" \ - "\n\nOptions:\n" \ - " -f Do not authenticate (user already authenticated)\n" \ - " -h Name of the remote host\n" \ - " -p Preserve environment" + "Begin a new session on the system\n" \ + "\nOptions:" \ + "\n -f Do not authenticate (user already authenticated)" \ + "\n -h Name of the remote host" \ + "\n -p Preserve environment" \ #define logname_trivial_usage \ "" @@ -2068,18 +2084,19 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define logread_trivial_usage \ "[OPTION]..." #define logread_full_usage \ - "Show messages in syslogd's circular buffer" \ - "\n\nOptions:\n" \ - " -f Output data as log grows" + "Show messages in syslogd's circular buffer\n" \ + "\nOptions:" \ + "\n -f Output data as log grows" \ #define losetup_trivial_usage \ "[-o OFS] LOOPDEV FILE - associate loop devices\n" \ " losetup -d LOOPDEV - disassociate\n" \ " losetup [-f] - show" #define losetup_full_usage \ - "Options:\n" \ - " -o OFS Start OFS bytes into FILE\n" \ - " -f Show first free loop device" + "Options:" \ + "\n -o OFS Start OFS bytes into FILE" \ + "\n -f Show first free loop device" \ + #define losetup_notes_usage \ "No arguments will display all current associations.\n" \ "One argument (losetup /dev/loop1) will display the current association\n" \ @@ -2093,12 +2110,12 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "SPOOLDIR" #define lpd_full_usage \ "Example:" \ - "\n tcpsvd -E 0 515 softlimit -m 99999 lpd /var/spool" + "\n tcpsvd -E 0 515 softlimit -m 99999 lpd /var/spool" #define lpq_trivial_usage \ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]" #define lpq_full_usage \ - "Options:" \ + "Options:" \ "\n -P lp service to connect to (else uses $PRINTER)" \ "\n -d Delete jobs" \ "\n -f Force any waiting job to be printed" \ @@ -2109,7 +2126,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ /* -C CLASS exists too, not shown. * CLASS is supposed to be printed on banner page, if one is requested */ #define lpr_full_usage \ - "Options:" \ + "Options:" \ "\n -P lp service to connect to (else uses $PRINTER)"\ "\n -m Send mail on completion" \ "\n -h Print banner page too" \ @@ -2125,67 +2142,67 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ USE_SELINUX("K") "] [filenames...]" #define ls_full_usage \ - "List directory contents" \ - "\n\nOptions:" \ - "\n -1 List files in a single column" \ - "\n -A Do not list implied . and .." \ - "\n -a Do not hide entries starting with ." \ - "\n -C List entries by columns" \ + "List directory contents\n" \ + "\nOptions:" \ + "\n -1 List files in a single column" \ + "\n -A Do not list implied . and .." \ + "\n -a Do not hide entries starting with ." \ + "\n -C List entries by columns" \ USE_FEATURE_LS_TIMESTAMPS( \ - "\n -c With -l: show ctime") \ + "\n -c With -l: show ctime") \ USE_FEATURE_LS_COLOR( \ - "\n --color[={always,never,auto}] Control coloring") \ - "\n -d List directory entries instead of contents" \ + "\n --color[={always,never,auto}] Control coloring") \ + "\n -d List directory entries instead of contents" \ USE_FEATURE_LS_TIMESTAMPS( \ - "\n -e List both full date and full time") \ + "\n -e List both full date and full time") \ USE_FEATURE_LS_FILETYPES( \ - "\n -F Append indicator (one of */=@|) to entries") \ - "\n -i List the i-node for each file" \ - "\n -l Use a long listing format" \ - "\n -n List numeric UIDs and GIDs instead of names" \ + "\n -F Append indicator (one of */=@|) to entries") \ + "\n -i List the i-node for each file" \ + "\n -l Use a long listing format" \ + "\n -n List numeric UIDs and GIDs instead of names" \ USE_FEATURE_LS_FILETYPES( \ - "\n -p Append indicator (one of /=@|) to entries") \ + "\n -p Append indicator (one of /=@|) to entries") \ USE_FEATURE_LS_FOLLOWLINKS( \ - "\n -L List entries pointed to by symlinks") \ + "\n -L List entries pointed to by symlinks") \ USE_FEATURE_LS_RECURSIVE( \ - "\n -R List subdirectories recursively") \ + "\n -R List subdirectories recursively") \ USE_FEATURE_LS_SORTFILES( \ - "\n -r Sort the listing in reverse order") \ + "\n -r Sort the listing in reverse order") \ USE_FEATURE_LS_SORTFILES( \ - "\n -S Sort the listing by file size") \ - "\n -s List the size of each file, in blocks" \ + "\n -S Sort the listing by file size") \ + "\n -s List the size of each file, in blocks" \ USE_FEATURE_AUTOWIDTH( \ - "\n -T NUM Assume Tabstop every NUM columns") \ + "\n -T NUM Assume Tabstop every NUM columns") \ USE_FEATURE_LS_TIMESTAMPS( \ - "\n -t With -l: show modification time") \ + "\n -t With -l: show modification time") \ USE_FEATURE_LS_TIMESTAMPS( \ - "\n -u With -l: show access time") \ + "\n -u With -l: show access time") \ USE_FEATURE_LS_SORTFILES( \ - "\n -v Sort the listing by version") \ + "\n -v Sort the listing by version") \ USE_FEATURE_AUTOWIDTH( \ - "\n -w NUM Assume the terminal is NUM columns wide") \ - "\n -x List entries by lines instead of by columns" \ + "\n -w NUM Assume the terminal is NUM columns wide") \ + "\n -x List entries by lines instead of by columns" \ USE_FEATURE_LS_SORTFILES( \ - "\n -X Sort the listing by extension") \ + "\n -X Sort the listing by extension") \ USE_FEATURE_HUMAN_READABLE( \ - "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ + "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ USE_SELINUX( \ - "\n -k Print security context") \ + "\n -k Print security context") \ USE_SELINUX( \ - "\n -K Print security context in long format") \ + "\n -K Print security context in long format") \ USE_SELINUX( \ - "\n -Z Print security context and permission") + "\n -Z Print security context and permission") \ #define lsattr_trivial_usage \ "[-Radlv] [files...]" #define lsattr_full_usage \ - "List file attributes on an ext2 fs" \ - "\n\nOptions:\n" \ - " -R Recursively list subdirectories\n" \ - " -a Do not hide entries starting with .\n" \ - " -d List directory entries instead of contents\n" \ - " -l Print long flag names\n" \ - " -v List the file's version/generation number" + "List file attributes on an ext2 fs\n" \ + "\nOptions:" \ + "\n -R Recursively list subdirectories" \ + "\n -a Do not hide entries starting with ." \ + "\n -d List directory entries instead of contents" \ + "\n -l Print long flag names" \ + "\n -v List the file's version/generation number" \ #define lsmod_trivial_usage \ "" @@ -2253,23 +2270,22 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" #define matchpathcon_full_usage \ " -n Do not display path" \ - "\n -N Do not use translations" \ - "\n -f Use alternate file_context file" \ - "\n -p Use prefix to speed translations" \ - "\n -V Verify file context on disk matches defaults" + "\n -N Do not use translations" \ + "\n -f Use alternate file_context file" \ + "\n -p Use prefix to speed translations" \ + "\n -V Verify file context on disk matches defaults" \ #define md5sum_trivial_usage \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage \ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ - "\n\nOptions:\n" \ - "With no FILE, or when FILE is -, read standard input." \ - USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ - " -c Check MD5 sums against given list\n" \ - "\nThe following two options are useful only when verifying checksums:\n" \ - " -s Don't output anything, status code shows success\n" \ - " -w Warn about improperly formatted MD5 checksum lines") + USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ + "\nOptions:" \ + "\n -c Check MD5 sums against given list" \ + "\n -s Don't output anything, status code shows success" \ + "\n -w Warn about improperly formatted MD5 checksum lines") \ + #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ @@ -2283,9 +2299,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define mdev_trivial_usage \ "[-s]" #define mdev_full_usage \ - " -s Scan /sys and populate /dev during system boot\n\n" \ + " -s Scan /sys and populate /dev during system boot\n" \ + "\n" \ "Called with no options (via hotplug) it uses environment variables\n" \ "to determine which device to add/remove." + #define mdev_notes_usage "" \ USE_FEATURE_MDEV_CONFIG( \ "The mdev config file contains lines that look like:\n" \ @@ -2316,23 +2334,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define microcom_trivial_usage \ "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY" #define microcom_full_usage \ - "Copy bytes for stdin to TTY and from TTY to stdout" \ - "\n\nOptions:" \ - "\n -d Wait up to DELAY ms for TTY output before sending every" \ - "\n next byte to it" \ - "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \ - "\n -s Set serial line to SPEED" \ - "\n -X Disable special meaning of NUL and Ctrl-X from stdin" + "Copy bytes for stdin to TTY and from TTY to stdout\n" \ + "\nOptions:" \ + "\n -d Wait up to DELAY ms for TTY output before sending every" \ + "\n next byte to it" \ + "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \ + "\n -s Set serial line to SPEED" \ + "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \ #define mkdir_trivial_usage \ "[OPTION] DIRECTORY..." #define mkdir_full_usage \ - "Create the DIRECTORY(ies) if they do not already exist" \ - "\n\nOptions:\n" \ - " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \ - " -p No error if existing, make parent directories as needed" \ + "Create DIRECTORY\n" \ + "\nOptions:" \ + "\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \ + "\n -p No error if existing, make parent directories as needed" \ USE_SELINUX( \ - "\n -Z Set security context" \ + "\n -Z Set security context" \ ) #define mkdir_example_usage \ @@ -2351,62 +2369,62 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ "device [blocks-count]" #define mke2fs_full_usage \ - " -b size Block size in bytes\n" \ - " -c Check for bad blocks before creating\n" \ - " -E opts Set extended options\n" \ - " -f size Fragment size in bytes\n" \ - " -F Force (ignore sanity checks)\n" \ - " -g num Number of blocks in a block group\n" \ - " -i ratio The bytes/inode ratio\n" \ - " -j Create a journal (ext3)\n" \ - " -J opts Set journal options (size/device)\n" \ - " -l file Read bad blocks list from file\n" \ - " -L lbl Set the volume label\n" \ - " -m percent Percent of fs blocks to reserve for admin\n" \ - " -M dir Set last mounted directory\n" \ - " -n Do not actually create anything\n" \ - " -N num Number of inodes to create\n" \ - " -o os Set the 'creator os' field\n" \ - " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \ - " -q Quiet\n" \ - " -r rev Set filesystem revision\n" \ - " -S Write superblock and group descriptors only\n" \ - " -T fs-type Set usage type (news/largefile/largefile4)\n" \ - " -v Verbose" + " -b size Block size in bytes" \ + "\n -c Check for bad blocks before creating" \ + "\n -E opts Set extended options" \ + "\n -f size Fragment size in bytes" \ + "\n -F Force (ignore sanity checks)" \ + "\n -g num Number of blocks in a block group" \ + "\n -i ratio The bytes/inode ratio" \ + "\n -j Create a journal (ext3)" \ + "\n -J opts Set journal options (size/device)" \ + "\n -l file Read bad blocks list from file" \ + "\n -L lbl Set the volume label" \ + "\n -m percent Percent of fs blocks to reserve for admin" \ + "\n -M dir Set last mounted directory" \ + "\n -n Do not actually create anything" \ + "\n -N num Number of inodes to create" \ + "\n -o os Set the 'creator os' field" \ + "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" \ + "\n -q Quiet" \ + "\n -r rev Set filesystem revision" \ + "\n -S Write superblock and group descriptors only" \ + "\n -T fs-type Set usage type (news/largefile/largefile4)" \ + "\n -v Verbose" \ #define mkfifo_trivial_usage \ "[OPTIONS] name" #define mkfifo_full_usage \ - "Create a named pipe (identical to 'mknod name p')" \ - "\n\nOptions:\n" \ - " -m Create the pipe using the specified mode (default a=rw)" \ + "Create named pipe (identical to 'mknod name p')\n" \ + "\nOptions:" \ + "\n -m MODE Mode (default a=rw)" \ USE_SELINUX( \ - "\n -Z Set security context" \ + "\n -Z Set security context" \ ) #define mkfs_minix_trivial_usage \ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage \ - "Make a MINIX filesystem" \ - "\n\nOptions:\n" \ - " -c Check device for bad blocks\n" \ - " -n [14|30] Maximum length of filenames\n" \ - " -i INODES Number of inodes for the filesystem\n" \ - " -l FILENAME Read bad blocks list from FILENAME\n" \ - " -v Make version 2 filesystem" + "Make a MINIX filesystem\n" \ + "\nOptions:" \ + "\n -c Check device for bad blocks" \ + "\n -n [14|30] Maximum length of filenames" \ + "\n -i INODES Number of inodes for the filesystem" \ + "\n -l FILENAME Read bad blocks list from FILENAME" \ + "\n -v Make version 2 filesystem" \ #define mknod_trivial_usage \ "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage \ - "Create a special file (block, character, or pipe)" \ - "\n\nOptions:\n" \ - " -m Create the special file using the specified mode (default a=rw)" \ - "\n\nTYPEs include:\n" \ - " b: Make a block (buffered) device\n" \ - " c or u: Make a character (un-buffered) device\n" \ - " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \ + "Create a special file (block, character, or pipe)\n" \ + "\nOptions:" \ + "\n -m Create the special file using the specified mode (default a=rw)" \ + "\nTYPEs include:" \ + "\n b: Make a block device" \ + "\n c or u: Make a character device" \ + "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \ USE_SELINUX( \ - "\n -Z Set security context" \ + "\n -Z Set security context" \ ) #define mknod_example_usage \ @@ -2419,7 +2437,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Prepare block device to be used as swap partition" #if 0 "[-c] [-v0|-v1] DEVICE [BLOCKS]" - "\n\nOptions:" + "\nOptions:" "\n -c Check for readability" "\n -v0 Make swap version 0 (max 128M)" "\n -v1 Make swap version 1 (default for kernels > 2.1.117)" @@ -2430,15 +2448,16 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-dt] [-p DIR] TEMPLATE" #define mktemp_full_usage \ "Create a temporary file with its name based on TEMPLATE.\n" \ - "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \ - "\n\nOptions:\n" \ - " -d Make a directory instead of a file\n" \ - /* " -q Fail silently if an error occurs\n" - we ignore it */ \ - " -t Generate a path rooted in temporary directory\n" \ - " -p DIR Use DIR as a temporary directory (implies -t)\n" \ - "\n" \ + "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n" \ + "\nOptions:" \ + "\n -d Make a directory instead of a file" \ +/* "\n -q Fail silently if an error occurs" - we ignore it */ \ + "\n -t Generate a path rooted in temporary directory" \ + "\n -p DIR Use DIR as a temporary directory (implies -t)" \ + "\n" \ + "\n" \ "For -t or -p, directory is chosen as follows:\n" \ - "$TMPDIR if set, else -p DIR, else /tmp" + "$TMPDIR if set, else -p DIR, else /tmp" \ #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ @@ -2449,13 +2468,14 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define modprobe_trivial_usage \ "[-knqrsv] MODULE [symbol=value...]" #define modprobe_full_usage \ - "Options:\n" \ - " -k Make module autoclean-able\n" \ - " -n Dry run\n" \ - " -q Quiet\n" \ - " -r Remove module (stacks) or do autoclean\n" \ - " -s Report via syslog instead of stderr\n" \ - " -v Verbose" + "Options:" \ + "\n -k Make module autoclean-able" \ + "\n -n Dry run" \ + "\n -q Quiet" \ + "\n -r Remove module (stacks) or do autoclean" \ + "\n -s Report via syslog instead of stderr" \ + "\n -v Verbose" \ + #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ @@ -2520,24 +2540,25 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[FILE...]" #define more_full_usage \ "View FILE or standard input one screenful at a time" + #define more_example_usage \ "$ dmesg | more\n" #define mount_trivial_usage \ "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage \ - "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \ - "\n\nOptions:\n" \ - " -a Mount all filesystems in fstab\n" \ + "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \ + "\nOptions:" \ + "\n -a Mount all filesystems in fstab" \ USE_FEATURE_MOUNT_FAKE( \ - " -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount\n" \ + "\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \ ) \ USE_FEATURE_MTAB_SUPPORT( \ - " -n Don't update /etc/mtab\n" \ + "\n -n Don't update /etc/mtab" \ ) \ - " -r Read-only mount\n" \ - " -t fs-type Filesystem type\n" \ - " -w Read-write mount (default)\n" \ + "\n -r Read-only mount" \ + "\n -t fs-type Filesystem type" \ + "\n -w Read-write mount (default)" \ "\n" \ "-o option:\n" \ USE_FEATURE_MOUNT_LOOP( \ @@ -2561,7 +2582,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " ro/rw Mount for read-only / read-write\n" \ "\n" \ "There are EVEN MORE flags that are specific to each filesystem\n" \ - "You'll have to see the written documentation for those filesystems" + "You'll have to see the written documentation for those filesystems" \ + #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ @@ -2576,11 +2598,12 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define mountpoint_trivial_usage \ "[-q] <[-d] DIR | -x DEVICE>" #define mountpoint_full_usage \ - "mountpoint checks if the directory is a mountpoint" \ - "\n\nOptions:\n" \ - " -q Quiet\n" \ - " -d Print major/minor device number of the filesystem\n" \ - " -x Print major/minor device number of the blockdevice" + "mountpoint checks if the directory is a mountpoint\n" \ + "\nOptions:" \ + "\n -q Quiet" \ + "\n -d Print major/minor device number of the filesystem" \ + "\n -x Print major/minor device number of the blockdevice" \ + #define mountpoint_example_usage \ "$ mountpoint /proc\n" \ "/proc is not a mountpoint\n" \ @@ -2591,31 +2614,35 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-f device] opcode value" #define mt_full_usage \ "Control magnetic tape drive operation\n" \ - "\nAvailable Opcodes:\n\n" \ + "\n" \ + "Available Opcodes:\n" \ + "\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ - "setpart tell unload unlock weof wset" + "setpart tell unload unlock weof wset" \ #define mv_trivial_usage \ "[OPTION]... SOURCE DEST\n" \ "or: mv [OPTION]... SOURCE... DIRECTORY" #define mv_full_usage \ - "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \ - "\n\nOptions:\n" \ - " -f Don't prompt before overwriting\n" \ - " -i Interactive, prompt before overwrite" + "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \ + "\nOptions:" \ + "\n -f Don't prompt before overwriting" \ + "\n -i Interactive, prompt before overwrite" \ + #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" #define nameif_trivial_usage \ "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage \ - "Rename network interface while it in the down state" \ - "\n\nOptions:\n" \ - " -c FILE Use configuration file (default is /etc/mactab)\n" \ - " -s Use syslog (LOCAL0 facility)\n" \ - " IFNAME MACADDR new_interface_name interface_mac_address" + "Rename network interface while it in the down state\n" \ + "\nOptions:" \ + "\n -c FILE Use configuration file (default is /etc/mactab)" \ + "\n -s Use syslog (LOCAL0 facility)" \ + "\n IFNAME MACADDR new_interface_name interface_mac_address" \ + #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ @@ -2636,16 +2663,16 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ NC_OPTIONS_STR \ USE_NC_EXTRA( \ - "\n -e Exec rest of command line after connect" \ - "\n -i SECS Delay interval for lines sent" \ - "\n -w SECS Timeout for connect" \ - "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ + "\n -e Exec rest of command line after connect" \ + "\n -i SECS Delay interval for lines sent" \ + "\n -w SECS Timeout for connect" \ + "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ ) \ USE_NC_SERVER( \ - "\n -l Listen mode, for inbound connects" \ + "\n -l Listen mode, for inbound connects" \ USE_NC_EXTRA( \ - "\n (use -l twice with -e for persistent server)") \ - "\n -p PORT Local port number" \ + "\n (use -l twice with -e for persistent server)") \ + "\n -p PORT Local port number" \ ) #define nc_notes_usage "" \ @@ -2669,26 +2696,28 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define nc_trivial_usage \ "[-options] hostname port - connect" \ - USE_NC_SERVER("\nnc [-options] -l -p port [hostname] [port] - listen") + USE_NC_SERVER("\n" \ + "nc [-options] -l -p port [hostname] [port] - listen") #define nc_full_usage \ + "Options:" \ + "\n -e prog [args] Program to exec after connect (must be last)" \ USE_NC_SERVER( \ - "-l Listen mode, for inbound connects\n" \ + "\n -l Listen mode, for inbound connects" \ ) \ - "-n Don't do DNS resolution" \ - "\n-s addr Local address" \ - "\n-p port Local port" \ - "\n-u UDP mode" \ - "\n-v Verbose (cumulative: -vv)" \ - "\n-w secs Timeout for connects and final net reads" \ + "\n -n Don't do DNS resolution" \ + "\n -s addr Local address" \ + "\n -p port Local port" \ + "\n -u UDP mode" \ + "\n -v Verbose (cumulative: -vv)" \ + "\n -w secs Timeout for connects and final net reads" \ USE_NC_EXTRA( \ - "\n-i sec Delay interval for lines sent" /* ", ports scanned" */ \ - "\n-o file Hex dump of traffic" \ - "\n-z Zero-I/O mode (scanning)" \ + "\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \ + "\n -o file Hex dump of traffic" \ + "\n -z Zero-I/O mode (scanning)" \ ) \ - "\n-e prog [args] Program to exec after connect (must be last)" \ -/* "\n-r Randomize local and remote ports" */ -/* "\n-g gateway Source-routing hop point[s], up to 8" */ -/* "\n-G num Source-routing pointer: 4, 8, 12, ..." */ +/* "\n -r Randomize local and remote ports" */ +/* "\n -g gateway Source-routing hop point[s], up to 8" */ +/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */ /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */ #endif @@ -2696,8 +2725,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define netstat_trivial_usage \ "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]" #define netstat_full_usage \ - "Display networking information" \ - "\n\nOptions:" \ + "Display networking information\n" \ + "\nOptions:" \ "\n -l Display listening server sockets" \ "\n -a Display all sockets (default: connected)" \ "\n -e Display other/more information" \ @@ -2714,9 +2743,9 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define nice_trivial_usage \ "[-n ADJUST] [COMMAND [ARG]...]" #define nice_full_usage \ - "Run a program with modified scheduling priority" \ - "\n\nOptions:\n" \ - " -n ADJUST Adjust the scheduling priority by ADJUST" + "Run a program with modified scheduling priority\n" \ + "\nOptions:" \ + "\n -n ADJUST Adjust the scheduling priority by ADJUST" \ #define nmeter_trivial_usage \ "format_string" @@ -2738,7 +2767,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "%b Monitor block io\n" \ "%Nt Show time (with N decimal points)\n" \ "%Nd Milliseconds between updates (default=1000)\n" \ - "%r Print instead of at EOL" + "%r Print instead of at EOL" \ + #define nmeter_example_usage \ "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" @@ -2778,35 +2808,35 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define passwd_trivial_usage \ "[OPTION] [name]" #define passwd_full_usage \ - "Change a user password. If no name is specified,\n" \ - "changes the password for the current user." \ - "\n\nOptions:\n" \ - " -a Define which algorithm shall be used for the password\n" \ - " (choices: des, md5)\n" /* ", sha1)" */ \ - " -d Delete the password for the specified user account\n" \ - " -l Locks (disables) the specified user account\n" \ - " -u Unlocks (re-enables) the specified user account" + "Change user's password. If no name is specified,\n" \ + "changes the password for the current user.\n" \ + "\nOptions:" \ + "\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \ + "\n -d Delete password for the account" \ + "\n -l Lock (disable) account" \ + "\n -u Unlock (re-enable) account" \ #define chpasswd_trivial_usage \ USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]") #define chpasswd_full_usage \ "Read user:password information from stdin\n" \ - "and update /etc/passwd accordingly." \ - "\n\nOptions:" \ + "and update /etc/passwd accordingly.\n" \ + "\nOptions:" \ USE_GETOPT_LONG( \ - "\n -e,--encrypt Supplied passwords are in encrypted form" \ - "\n -m,--md5 Use MD5 encryption instead of DES" \ + "\n -e,--encrypt Supplied passwords are in encrypted form" \ + "\n -m,--md5 Use MD5 encryption instead of DES" \ ) \ SKIP_GETOPT_LONG( \ - "\n -e Supplied passwords are in encrypted form" \ - "\n -m Use MD5 encryption instead of DES" \ + "\n -e Supplied passwords are in encrypted form" \ + "\n -m Use MD5 encryption instead of DES" \ ) #define patch_trivial_usage \ - "[-p num] [-i diff]" + "[-p NUM] [-i DIFF]" #define patch_full_usage \ - " -p NUM Strip NUM leading components from file names\n" \ - " -i DIFF Read DIFF instead of stdin" + " -p NUM Strip NUM leading components from file names" \ + "\n -i DIFF Read DIFF instead of stdin" \ + #define patch_example_usage \ "$ patch -p1 < example.diff\n" \ "$ patch -p0 -i example.diff" @@ -2814,14 +2844,14 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define pgrep_trivial_usage \ "[-flnovx] pattern" #define pgrep_full_usage \ - "Display process(es) selected by regex pattern" \ - "\n\nOptions:\n" \ - " -l Show command name too\n" \ - " -f Match against entire command line\n" \ - " -n Show the newest process only\n" \ - " -o Show the oldest process only\n" \ - " -v Negate the matching\n" \ - " -x Match whole name (not substring)" + "Display process(es) selected by regex pattern\n" \ + "\nOptions:" \ + "\n -l Show command name too" \ + "\n -f Match against entire command line" \ + "\n -n Show the newest process only" \ + "\n -o Show the oldest process only" \ + "\n -v Negate the matching" \ + "\n -x Match whole name (not substring)" \ #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) #define pidof_trivial_usage \ @@ -2839,7 +2869,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n -s Show only one PID") \ USE_FEATURE_PIDOF_OMIT( \ "\n -o PID Omit given pid" \ - "\n Use %PPID to omit pid of pidof's parent") + "\n Use %PPID to omit pid of pidof's parent") \ + #define pidof_example_usage \ "$ pidof init\n" \ "1\n" \ @@ -2861,24 +2892,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define ping_trivial_usage \ "[OPTION]... host" #define ping_full_usage \ - "Send ICMP ECHO_REQUEST packets to network hosts" \ - "\n\nOptions:\n" \ - " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \ - " -c CNT Send only CNT pings\n" \ - " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ - " -I iface/IP Use interface or IP address as source\n" \ - " -q Quiet, only displays output at start\n" \ - " and when finished" + "Send ICMP ECHO_REQUEST packets to network hosts\n" \ + "\nOptions:" \ + "\n -4, -6 Force IPv4 or IPv6 hostname resolution" \ + "\n -c CNT Send only CNT pings" \ + "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ + "\n -I iface/IP Use interface or IP address as source" \ + "\n -q Quiet, only displays output at start" \ + "\n and when finished" \ + #define ping6_trivial_usage \ "[OPTION]... host" #define ping6_full_usage \ - "Send ICMP ECHO_REQUEST packets to network hosts" \ - "\n\nOptions:\n" \ - " -c CNT Send only CNT pings\n" \ - " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ - " -I iface/IP Use interface or IP address as source\n" \ - " -q Quiet, only displays output at start\n" \ - " and when finished" + "Send ICMP ECHO_REQUEST packets to network hosts\n" \ + "\nOptions:" \ + "\n -c CNT Send only CNT pings" \ + "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ + "\n -I iface/IP Use interface or IP address as source" \ + "\n -q Quiet, only displays output at start" \ + "\n and when finished" \ + #endif #define ping_example_usage \ "$ ping localhost\n" \ @@ -2906,23 +2939,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define pkill_trivial_usage \ "[-l] | [-fnovx] [-signal] pattern" #define pkill_full_usage \ - "Send a signal to process(es) selected by regex pattern" \ - "\n\nOptions:\n" \ - " -l List all signals\n" \ - " -f Match against entire command line\n" \ - " -n Signal the newest process only\n" \ - " -o Signal the oldest process only\n" \ - " -v Negate the matching\n" \ - " -x Match whole name (not substring)" + "Send a signal to process(es) selected by regex pattern\n" \ + "\nOptions:" \ + "\n -l List all signals" \ + "\n -f Match against entire command line" \ + "\n -n Signal the newest process only" \ + "\n -o Signal the oldest process only" \ + "\n -v Negate the matching" \ + "\n -x Match whole name (not substring)" \ #define poweroff_trivial_usage \ "[-d delay] [-n] [-f]" #define poweroff_full_usage \ - "Halt and shut off power" \ - "\n\nOptions:\n" \ - " -d Delay interval for halting\n" \ - " -n No call to sync()\n" \ - " -f Force power off (don't go through init)" + "Halt and shut off power\n" \ + "\nOptions:" \ + "\n -d Delay interval for halting" \ + "\n -n No call to sync()" \ + "\n -f Force power off (don't go through init)" \ #define printenv_trivial_usage \ "[VARIABLES...]" @@ -2945,13 +2978,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define ps_trivial_usage \ "" #define ps_full_usage \ - "Report process status" \ - "\n\nOptions:" \ - "\n -o col1,col2=header Select columns for display" \ + "Report process status\n" \ + "\nOptions:" \ + "\n -o col1,col2=header Select columns for display" \ #else /* !ENABLE_DESKTOP */ -#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE +#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE #define USAGE_PS "\nThis version of ps accepts no options" #else #define USAGE_PS "\nOptions:" @@ -2963,9 +2996,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Report process status\n" \ USAGE_PS \ USE_SELINUX( \ - "\n -Z Show SE Linux context") \ + "\n -Z Show SE Linux context" \ + ) \ USE_FEATURE_PS_WIDE( \ - "\n w Wide output") + "\n w Wide output" \ + ) #endif /* ENABLE_DESKTOP */ @@ -2985,8 +3020,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define pscan_trivial_usage \ "[-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" #define pscan_full_usage \ - "Scan a host, print all open ports" \ - "\n\nOptions:" \ + "Scan a host, print all open ports\n" \ + "\nOptions:" \ "\n -p Scan from this port (default 1)" \ "\n -P Scan up to this port (default 1024)" \ "\n -t Timeout (default 5000 ms)" \ @@ -3010,10 +3045,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define rdate_trivial_usage \ "[-sp] HOST" #define rdate_full_usage \ - "Get and possibly set the system date and time from a remote HOST" \ - "\n\nOptions:\n" \ - " -s Set the system date and time (default)\n" \ - " -p Print the date and time" + "Get and possibly set the system date and time from a remote HOST\n" \ + "\nOptions:" \ + "\n -s Set the system date and time (default)" \ + "\n -p Print the date and time" \ #define readahead_trivial_usage \ "[FILE]..." @@ -3025,24 +3060,24 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" #define readlink_full_usage \ "Display the value of a symlink" \ - USE_FEATURE_READLINK_FOLLOW( \ - "\n\nOptions:\n" \ - " -f Canonicalize by following all symlinks") + USE_FEATURE_READLINK_FOLLOW( "\n" \ + "\nOptions:" \ + "\n -f Canonicalize by following all symlinks") \ #define readprofile_trivial_usage \ "[OPTIONS]..." #define readprofile_full_usage \ - "Options:\n" \ - " -m mapfile (Default: /boot/System.map)\n" \ - " -p profile (Default: /proc/profile)\n" \ - " -M mult Set the profiling multiplier to mult\n" \ - " -i Print only info about the sampling step\n" \ - " -v Verbose\n" \ - " -a Print all symbols, even if count is 0\n" \ - " -b Print individual histogram-bin counts\n" \ - " -s Print individual counters within functions\n" \ - " -r Reset all the counters (root only)\n" \ - " -n Disable byte order auto-detection" + "Options:" \ + "\n -m mapfile (Default: /boot/System.map)" \ + "\n -p profile (Default: /proc/profile)" \ + "\n -M mult Set the profiling multiplier to mult" \ + "\n -i Print only info about the sampling step" \ + "\n -v Verbose" \ + "\n -a Print all symbols, even if count is 0" \ + "\n -b Print individual histogram-bin counts" \ + "\n -s Print individual counters within functions" \ + "\n -r Reset all the counters (root only)" \ + "\n -n Disable byte order auto-detection" \ #define realpath_trivial_usage \ "pathname..." @@ -3052,21 +3087,21 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define reboot_trivial_usage \ "[-d delay] [-n] [-f]" #define reboot_full_usage \ - "Reboot the system" \ - "\n\nOptions:\n" \ - " -d Delay interval for rebooting\n" \ - " -n No call to sync()\n" \ - " -f Force reboot (don't go through init)" + "Reboot the system\n" \ + "\nOptions:" \ + "\n -d Delay interval for rebooting" \ + "\n -n No call to sync()" \ + "\n -f Force reboot (don't go through init)" \ #define renice_trivial_usage \ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" #define renice_full_usage \ - "Change priority of running processes" \ - "\n\nOptions:\n" \ - " -n Adjust current nice value (smaller is faster)\n" \ - " -p Process id(s) (default)\n" \ - " -g Process group id(s)\n" \ - " -u Process user name(s) and/or id(s)" + "Change priority of running processes\n" \ + "\nOptions:" \ + "\n -n Adjust current nice value (smaller is faster)" \ + "\n -p Process id(s) (default)" \ + "\n -g Process group id(s)" \ + "\n -u Process user name(s) and/or id(s)" \ #define reset_trivial_usage \ "" @@ -3082,27 +3117,28 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]" #define restorecon_full_usage \ "Reset security contexts of files in pathname\n" \ - "\n -i Ignore files that do not exist" \ - "\n -f file File with list of files to process. Use - for stdin" \ - "\n -e directory Directory to exclude" \ - "\n -R,-r Recurse directories" \ - "\n -n Don't change any file labels" \ - "\n -o file Save list of files with incorrect context" \ - "\n -v Verbose" \ - "\n -vv Show changed labels" \ - "\n -F Force reset of context to match file_context" \ - "\n for customizable files, or the user section," \ - "\n if it has changed" + "\n -i Ignore files that do not exist" \ + "\n -f file File with list of files to process. Use - for stdin" \ + "\n -e directory Directory to exclude" \ + "\n -R,-r Recurse directories" \ + "\n -n Don't change any file labels" \ + "\n -o file Save list of files with incorrect context" \ + "\n -v Verbose" \ + "\n -vv Show changed labels" \ + "\n -F Force reset of context to match file_context" \ + "\n for customizable files, or the user section," \ + "\n if it has changed" \ #define rm_trivial_usage \ "[OPTION]... FILE..." #define rm_full_usage \ "Remove (unlink) the FILE(s). Use '--' to\n" \ - "indicate that all following arguments are non-options." \ - "\n\nOptions:\n" \ - " -i Always prompt before removing\n" \ - " -f Never prompt\n" \ - " -r,-R Remove directories recursively" + "indicate that all following arguments are non-options.\n" \ + "\nOptions:" \ + "\n -i Always prompt before removing" \ + "\n -f Never prompt" \ + "\n -r,-R Remove directories recursively" \ + #define rm_example_usage \ "$ rm -rf /tmp/foo\n" @@ -3116,33 +3152,34 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define rmmod_trivial_usage \ "[OPTION]... [MODULE]..." #define rmmod_full_usage \ - "Unload the specified kernel modules from the kernel" \ - "\n\nOptions:\n" \ - " -a Remove all unused modules (recursively)" + "Unload the specified kernel modules from the kernel\n" \ + "\nOptions:" \ + "\n -a Remove all unused modules (recursively)" \ + #define rmmod_example_usage \ "$ rmmod tulip\n" #define route_trivial_usage \ "[{add|del|delete}]" #define route_full_usage \ - "Edit the kernel's routing tables" \ - "\n\nOptions:\n" \ - " -n Dont resolve names\n" \ - " -e Display other/more information\n" \ - " -A inet" USE_FEATURE_IPV6("{6}") " Select address family" + "Edit the kernel's routing tables\n" \ + "\nOptions:" \ + "\n -n Dont resolve names" \ + "\n -e Display other/more information" \ + "\n -A inet" USE_FEATURE_IPV6("{6}") " Select address family" \ #define rpm_trivial_usage \ "-i -q[ildc]p package.rpm" #define rpm_full_usage \ - "Manipulate RPM packages" \ - "\n\nOptions:" \ - "\n -i Install package" \ - "\n -q Query package" \ - "\n -p Query uninstalled package" \ - "\n -i Show information" \ - "\n -l List contents" \ - "\n -d List documents" \ - "\n -c List config files" + "Manipulate RPM packages\n" \ + "\nOptions:" \ + "\n -i Install package" \ + "\n -q Query package" \ + "\n -p Query uninstalled package" \ + "\n -i Show information" \ + "\n -l List contents" \ + "\n -d List documents" \ + "\n -c List config files" \ #define rpm2cpio_trivial_usage \ "package.rpm" @@ -3152,45 +3189,45 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define rtcwake_trivial_usage \ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SECS | -t TIME]" #define rtcwake_full_usage \ - "enter a system sleep state until specified wakeup time\n\n" \ + "Enter a system sleep state until specified wakeup time\n" \ USE_GETOPT_LONG( \ - " -a,--auto Read clock mode from adjtime\n" \ - " -l,--local Clock is set to local time\n" \ - " -u,--utc Clock is set to UTC time\n" \ - " -d,--device=DEV Specify the RTC device\n" \ - " -m,--mode=MODE Set the sleep state (default: standby)\n" \ - " -s,--seconds=SEC Set the timeout in SEC seconds from now\n" \ - " -t,--time=TIME Set the timeout to TIME seconds from epoch" \ + "\n -a,--auto Read clock mode from adjtime" \ + "\n -l,--local Clock is set to local time" \ + "\n -u,--utc Clock is set to UTC time" \ + "\n -d,--device=DEV Specify the RTC device" \ + "\n -m,--mode=MODE Set the sleep state (default: standby)" \ + "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \ + "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \ ) \ SKIP_GETOPT_LONG( \ - " -a Read clock mode from adjtime\n" \ - " -l Clock is set to local time\n" \ - " -u Clock is set to UTC time\n" \ - " -d DEV Specify the RTC device\n" \ - " -m MODE Set the sleep state (default: standby)\n" \ - " -s SEC Set the timeout in SEC seconds from now\n" \ - " -t TIME Set the timeout to TIME seconds from epoch" \ + "\n -a Read clock mode from adjtime" \ + "\n -l Clock is set to local time" \ + "\n -u Clock is set to UTC time" \ + "\n -d DEV Specify the RTC device" \ + "\n -m MODE Set the sleep state (default: standby)" \ + "\n -s SEC Set the timeout in SEC seconds from now" \ + "\n -t TIME Set the timeout to TIME seconds from epoch" \ ) #define runcon_trivial_usage \ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ " runcon CONTEXT COMMAND [args]" #define runcon_full_usage \ - "Run a program in a different security context\n\n" \ - " CONTEXT Complete security context\n" \ + "Run a program in a different security context\n" \ + "\n CONTEXT Complete security context\n" \ USE_GETOPT_LONG( \ - " -c,--compute Compute process transition context before modifying\n" \ - " -t,--type=TYPE Type (for same role as parent)\n" \ - " -u,--user=USER User identity\n" \ - " -r,--role=ROLE Role\n" \ - " -l,--range=RNG Levelrange" \ + "\n -c,--compute Compute process transition context before modifying" \ + "\n -t,--type=TYPE Type (for same role as parent)" \ + "\n -u,--user=USER User identity" \ + "\n -r,--role=ROLE Role" \ + "\n -l,--range=RNG Levelrange" \ ) \ SKIP_GETOPT_LONG( \ - " -c Compute process transition context before modifying\n" \ - " -t TYPE Type (for same role as parent)\n" \ - " -u USER User identity\n" \ - " -r ROLE Role\n" \ - " -l RNG Levelrange" \ + "\n -c Compute process transition context before modifying" \ + "\n -t TYPE Type (for same role as parent)" \ + "\n -u USER User identity" \ + "\n -r ROLE Role" \ + "\n -l RNG Levelrange" \ ) #define run_parts_trivial_usage \ @@ -3253,23 +3290,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n -a Append output" \ "\n -c Run COMMAND, not shell" \ "\n -f Flush output after each write" \ - "\n -q Quiet" + "\n -q Quiet" \ #define sed_trivial_usage \ "[-efinr] pattern [files...]" #define sed_full_usage \ - "Options:\n" \ - " -e script Add the script to the commands to be executed\n" \ - " -f scriptfile Add scriptfile contents to the\n" \ - " commands to be executed\n" \ - " -i Edit files in-place\n" \ - " -n Suppress automatic printing of pattern space\n" \ - " -r Use extended regular expression syntax\n" \ - "\n" \ - "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ - "script to interpret. All remaining arguments are names of input files; if no\n" \ - "input files are specified, then the standard input is read. Source files\n" \ - "will not be modified unless -i option is given." + "Options:" \ + "\n -e script Add the script to the commands to be executed" \ + "\n -f scriptfile Add scriptfile contents to the" \ + "\n commands to be executed" \ + "\n -i Edit files in-place" \ + "\n -n Suppress automatic printing of pattern space" \ + "\n -r Use extended regular expression syntax" \ + "\n" \ + "\nIf no -e or -f is given, the first non-option argument is taken as the sed" \ + "\nscript to interpret. All remaining arguments are names of input files; if no" \ + "\ninput files are specified, then the standard input is read. Source files" \ + "\nwill not be modified unless -i option is given." \ #define sed_example_usage \ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ @@ -3282,16 +3319,16 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-w timeout] [-U user] [-P password] [-X]\n" \ "-t to [-t to]... [-n] [-s subject] [-c charset] server[:port] from [body] [attachment ...]" #define sendmail_full_usage \ - "Send an email with optional attachments." \ - "\n\nOptions:\n" \ - " -w timeout Set timeout on network operations\n" \ - " -U username Authenticate with specified username/password\n" \ - " -P password\n" \ - " -t address Recipient(s). May be repeated\n" \ - " -X Use openssl connection helper for secured servers\n" \ - " -n Request delivery notification to sender\n" \ - " -s subject Subject\n" \ - " -c charset Assumed charset for body and subject [utf-8]" + "Send an email.\n" \ + "\nOptions:" \ + "\n -w timeout Set timeout on network operations" \ + "\n -U username Authenticate with specified username/password" \ + "\n -P password" \ + "\n -t address Recipient(s). May be repeated" \ + "\n -X Use openssl connection helper for secured servers" \ + "\n -n Request delivery notification to sender" \ + "\n -s subject Subject" \ + "\n -c charset Assumed charset for body and subject [utf-8]" \ #define seq_trivial_usage \ "[first [increment]] last" @@ -3306,15 +3343,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define sestatus_trivial_usage \ "[-vb]" #define sestatus_full_usage \ - "-v Verbose\n" \ - "-b Display current state of booleans" + " -v Verbose" \ + "\n -b Display current state of booleans" \ #define setconsole_trivial_usage \ "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]" #define setconsole_full_usage \ - "Redirect system console output to DEVICE (default: /dev/tty)" \ - "\n\nOptions:\n" \ - " -r Reset output to /dev/console" + "Redirect system console output to DEVICE (default: /dev/tty)\n" \ + "\nOptions:" \ + "\n -r Reset output to /dev/console" \ #define setenforce_trivial_usage \ "[Enforcing | Permissive | 1 | 0]" @@ -3326,24 +3363,23 @@ USE_FEATURE_BRCTL_FANCY("\n" \ " [-c policyfile] spec_file" \ ) \ " pathname" - #define setfiles_full_usage \ - "Reset file contexts under pathname according to spec_file" \ + "Reset file contexts under pathname according to spec_file\n" \ USE_FEATURE_SETFILES_CHECK_OPTION( \ - "\n -c file Check the validity of the contexts against the specified binary policy" \ + "\n -c file Check the validity of the contexts against the specified binary policy" \ ) \ - "\n -d Show which specification matched each file" \ - "\n -l Log changes in file labels to syslog" \ - "\n -n Don't change any file labels" \ - "\n -q Suppress warnings" \ - "\n -r dir Use an altenate root path" \ - "\n -e dir Exclude directory" \ - "\n -F Force reset of context to match file_context for customizable files" \ - "\n -o file Save list of files with incorrect context" \ - "\n -s Take a list of files from standard input (instead of command line)" \ - "\n -v Show changes in file labels, if type or role are changing" \ - "\n -vv Show changes in file labels, if type, role, or user are changing" \ - "\n -W Display warnings about entries that had no matching files" + "\n -d Show which specification matched each file" \ + "\n -l Log changes in file labels to syslog" \ + "\n -n Don't change any file labels" \ + "\n -q Suppress warnings" \ + "\n -r dir Use an altenate root path" \ + "\n -e dir Exclude directory" \ + "\n -F Force reset of context to match file_context for customizable files" \ + "\n -o file Save list of files with incorrect context" \ + "\n -s Take a list of files from standard input (instead of command line)" \ + "\n -v Show changes in file labels, if type or role are changing" \ + "\n -vv Show changes in file labels, if type, role, or user are changing" \ + "\n -W Display warnings about entries that had no matching files" \ #define setkeycodes_trivial_usage \ "SCANCODE KEYCODE..." @@ -3351,7 +3387,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Set entries into the kernel's scancode-to-keycode map,\n" \ "allowing unusual keyboards to generate usable keycodes.\n\n" \ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ - "and KEYCODE is given in decimal" + "and KEYCODE is given in decimal" \ + #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" @@ -3367,10 +3404,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Change boolean setting" #define setsid_trivial_usage \ - "program [arg...]" + "PROG [ARG...]" #define setsid_full_usage \ - "Run any program in a new session by calling setsid() before\n" \ - "exec'ing the rest of its arguments. See setsid(2) for details." + "Run PROG in a new session. PROG will have no controlling terminal\n" \ + "and will not be affected by keyboard signals (Ctrl-C etc).\n" \ + "See setsid(2) for details." \ #define lash_trivial_usage \ "[FILE]...\n" \ @@ -3387,14 +3425,13 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") #define sha1sum_full_usage \ - "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \ - "With no FILE, or when FILE is -, read standard input." \ - "\n\nOptions:\n" \ - USE_FEATURE_MD5_SHA1_SUM_CHECK( \ - " -c Check SHA1 sums against given list\n" \ - "\nThe following two options are useful only when verifying checksums:\n" \ - " -s Don't output anything, status code shows success\n" \ - " -w Warn about improperly formatted SHA1 checksum lines") + "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \ + USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ + "\nOptions:" \ + "\n -c Check SHA1 sums against given list" \ + "\n -s Don't output anything, status code shows success" \ + "\n -w Warn about improperly formatted SHA1 checksum lines" \ + ) #define slattach_trivial_usage \ "[-cehmLF] [-s speed] [-p protocol] DEVICEs" @@ -3429,8 +3466,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \ "] [FILE]..." #define sort_full_usage \ - "Sort lines of text in the specified files" \ - "\n\nOptions:" \ + "Sort lines of text\n" \ + "\nOptions:" \ USE_FEATURE_SORT_BIG( \ "\n -b Ignore leading blanks" \ "\n -c Check whether input is sorted" \ @@ -3476,9 +3513,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[OPTION] [INPUT [PREFIX]]" #define split_full_usage \ "Options:" \ - "\n -b n[k|m] Split by bytes" \ - "\n -l n Split by lines" \ - "\n -a n Use n letters as suffix" + "\n -b n[k|m] Split by bytes" \ + "\n -l n Split by lines" \ + "\n -a n Use n letters as suffix" \ + #define split_example_usage \ "$ split TODO foo\n" \ "$ cat TODO | split -a 2 -l 2 TODO_\n" @@ -3488,59 +3526,60 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \ "] ... [-- arguments...]" #define start_stop_daemon_full_usage \ - "Start and stop services" \ - "\n\nOptions:" \ + "Start and stop services\n" \ + "\nOptions:" \ USE_GETOPT_LONG( \ - "\n -S,--start Start" \ - "\n -K,--stop Stop" \ - "\n -a,--startas pathname Starts process specified by pathname" \ - "\n -b,--background Put process into background" \ - "\n -u,--user username|uid Stop this user's processes" \ - "\n -x,--exec executable Program to either start or check" \ - "\n -n,--name process-name Stop processes with this name" \ - "\n -p,--pidfile pid-file Save or load pid using a pid-file" \ - "\n -m,--make-pidfile Create the -p file and enter pid in it" \ - "\n -q,--quiet Quiet" \ + "\n -S,--start Start" \ + "\n -K,--stop Stop" \ + "\n -a,--startas pathname Start process specified by pathname" \ + "\n -b,--background Put process into background" \ + "\n -u,--user username|uid Stop this user's processes" \ + "\n -x,--exec executable Program to either start or check" \ + "\n -n,--name process-name Stop processes with this name" \ + "\n -p,--pidfile pid-file Save or load pid using a pid-file" \ + "\n -m,--make-pidfile Create the -p file and enter pid in it" \ + "\n -q,--quiet Quiet" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ - "\n -o,--oknodo Exit status 0 if nothing done" \ - "\n -v,--verbose Verbose" \ - "\n -N,--nicelevel N Add N to process's nice level" \ + "\n -o,--oknodo Exit status 0 if nothing done" \ + "\n -v,--verbose Verbose" \ + "\n -N,--nicelevel N Add N to process's nice level" \ ) \ - "\n -s,--signal signal Signal to send (default TERM)" \ - "\n -c,--chuid user[:[grp]] Change to specified user/group" \ + "\n -s,--signal signal Signal to send (default TERM)" \ + "\n -c,--chuid user[:[grp]] Change to specified user/group" \ ) \ SKIP_GETOPT_LONG( \ - "\n -S Start" \ - "\n -K Stop" \ - "\n -a pathname Starts process specified by pathname" \ - "\n -b Put process into background" \ - "\n -u username|uid Stop this user's processes" \ - "\n -x executable Program to either start or check" \ - "\n -n process-name Stop processes with this name" \ - "\n -p pid-file Save or load pid using a pid-file" \ - "\n -m Create the -p file and enter pid in it" \ - "\n -q Quiet" \ + "\n -S Start" \ + "\n -K Stop" \ + "\n -a pathname Start process specified by pathname" \ + "\n -b Put process into background" \ + "\n -u username|uid Stop this user's processes" \ + "\n -x executable Program to either start or check" \ + "\n -n process-name Stop processes with this name" \ + "\n -p pid-file Save or load pid using a pid-file" \ + "\n -m Create the -p file and enter pid in it" \ + "\n -q Quiet" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ - "\n -o Exit status 0 if nothing done" \ - "\n -v Verbose" \ - "\n -N N Add N to process's nice level" \ + "\n -o Exit status 0 if nothing done" \ + "\n -v Verbose" \ + "\n -N N Add N to process's nice level" \ ) \ - "\n -s signal Signal to send (default TERM)" \ - "\n -c user[:[grp]] Change to specified user/group" \ + "\n -s signal Signal to send (default TERM)" \ + "\n -c user[:[grp]] Change to specified user/group" \ ) #define stat_trivial_usage \ "[OPTION] FILE..." #define stat_full_usage \ - "Display file (default) or filesystem status" \ - "\n\nOptions:\n" \ + "Display file (default) or filesystem status\n" \ + "\nOptions:" \ USE_FEATURE_STAT_FORMAT( \ - " -c fmt Use the specified format\n") \ - " -f Display filesystem status\n" \ - " -L Dereference links\n" \ - " -t Display info in terse form" \ + "\n -c fmt Use the specified format" \ + ) \ + "\n -f Display filesystem status" \ + "\n -L Dereference links" \ + "\n -t Display info in terse form" \ USE_SELINUX( \ - "\n -Z Print security context" \ + "\n -Z Print security context" \ ) \ USE_FEATURE_STAT_FORMAT( \ "\n\nValid format sequences for files:\n" \ @@ -3591,47 +3630,47 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define strings_trivial_usage \ "[-afo] [-n length] [file...]" #define strings_full_usage \ - "Display printable strings in a binary file" \ - "\n\nOptions:" \ - "\n -a Scan whole file (default)" \ - "\n -f Precede strings with filenames" \ - "\n -n N At least N characters form a string (default 4)" \ - "\n -o Precede strings with decimal offsets" + "Display printable strings in a binary file\n" \ + "\nOptions:" \ + "\n -a Scan whole file (default)" \ + "\n -f Precede strings with filenames" \ + "\n -n N At least N characters form a string (default 4)" \ + "\n -o Precede strings with decimal offsets" \ #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." #define stty_full_usage \ "Without arguments, prints baud rate, line discipline,\n" \ - "and deviations from stty sane" \ - "\n\nOptions:" \ - "\n -F DEVICE Open device instead of stdin" \ - "\n -a Print all current settings in human-readable form" \ - "\n -g Print in stty-readable form" \ - "\n [SETTING] See manpage" + "and deviations from stty sane\n" \ + "\nOptions:" \ + "\n -F DEVICE Open device instead of stdin" \ + "\n -a Print all current settings in human-readable form" \ + "\n -g Print in stty-readable form" \ + "\n [SETTING] See manpage" \ #define su_trivial_usage \ "[OPTION]... [-] [username]" #define su_full_usage \ - "Change user id or become root" \ - "\n\nOptions:" \ - "\n -p, -m Preserve environment" \ - "\n -c Command to pass to 'sh -c'" \ - "\n -s Shell to use instead of default shell" + "Change user id or become root\n" \ + "\nOptions:" \ + "\n -p, -m Preserve environment" \ + "\n -c Command to pass to 'sh -c'" \ + "\n -s Shell to use instead of default shell" \ #define sulogin_trivial_usage \ "[OPTION]... [tty-device]" #define sulogin_full_usage \ - "Single user login" \ - "\n\nOptions:" \ - "\n -t Timeout" + "Single user login\n" \ + "\nOptions:" \ + "\n -t Timeout" \ #define sum_trivial_usage \ "[rs] [files...]" #define sum_full_usage \ - "Checksum and count the blocks in a file" \ - "\n\nOptions:\n" \ - " -r Use BSD sum algorithm (1K blocks)\n" \ - " -s Use System V sum algorithm (512byte blocks)" + "Checksum and count the blocks in a file\n" \ + "\nOptions:" \ + "\n -r Use BSD sum algorithm (1K blocks)" \ + "\n -s Use System V sum algorithm (512byte blocks)" \ #define sv_trivial_usage \ "[-v] [-w sec] command service..." @@ -3647,36 +3686,36 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ " runsv exits too\n" \ "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ - "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" + "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \ #define svlogd_trivial_usage \ "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." #define svlogd_full_usage \ "Continuously read log data from standard input, optionally " \ "filter log messages, and write the data to one or more automatically " \ - "rotated logs" + "rotated logs" \ #define swapoff_trivial_usage \ "[-a] [DEVICE]" #define swapoff_full_usage \ - "Stop swapping virtual memory pages on DEVICE" \ - "\n\nOptions:\n" \ - " -a Stop swapping on all swap devices" + "Stop swapping on DEVICE\n" \ + "\nOptions:" \ + "\n -a Stop swapping on all swap devices" \ #define swapon_trivial_usage \ "[-a] [DEVICE]" #define swapon_full_usage \ - "Start swapping virtual memory pages on DEVICE" \ - "\n\nOptions:\n" \ - " -a Start swapping on all swap devices" + "Start swapping on DEVICE\n" \ + "\nOptions:" \ + "\n -a Start swapping on all swap devices" \ #define switch_root_trivial_usage \ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" #define switch_root_full_usage \ "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ - "and exec NEW_INIT" \ - "\n\nOptions:\n" \ - " -c Redirect console to device on new root" + "and exec NEW_INIT\n" \ + "\nOptions:" \ + "\n -c Redirect console to device on new root" \ #define sync_trivial_usage \ "" @@ -3686,14 +3725,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define sysctl_trivial_usage \ "[OPTIONS]... [VALUE]..." #define sysctl_full_usage \ - "Configure kernel parameters at runtime" \ - "\n\nOptions:\n" \ - " -n Disable printing of key names\n" \ - " -e Don't warn about unknown keys\n" \ - " -w Change sysctl setting\n" \ - " -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)\n" \ - " -a Display all values\n" \ - " -A Display all values in table form" + "Configure kernel parameters at runtime\n" \ + "\nOptions:" \ + "\n -n Disable printing of key names" \ + "\n -e Don't warn about unknown keys" \ + "\n -w Change sysctl setting" \ + "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \ + "\n -a Display all values" \ + "\n -A Display all values in table form" \ + #define sysctl_example_usage \ "sysctl [-n] [-e] variable...\n" \ "sysctl [-n] [-e] -w variable=value...\n" \ @@ -3720,9 +3760,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_SYSLOGD_DUP( \ "\n -D Drop duplicates") \ USE_FEATURE_IPC_SYSLOG( \ - "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") + "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \ /* NB: -Csize shouldn't have space (because size is optional) */ /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */ + #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" @@ -3730,27 +3771,28 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define tac_trivial_usage \ "[FILE]..." #define tac_full_usage \ - "Concatenates FILE(s) and prints them to stdout in reverse" + "Concatenate FILE(s) and print them in reverse" #define tail_trivial_usage \ "[OPTION]... [FILE]..." #define tail_full_usage \ "Print last 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input." \ - "\n\nOptions:" \ + "file name. With no FILE, or when FILE is -, read standard input.\n" \ + "\nOptions:" \ USE_FEATURE_FANCY_TAIL( \ - "\n -c N[kbm] Output the last N bytes") \ - "\n -n N[kbm] Print last N lines instead of last 10" \ - "\n -f Output data as the file grows" \ + "\n -c N[kbm] Output the last N bytes") \ + "\n -n N[kbm] Print last N lines instead of last 10" \ + "\n -f Output data as the file grows" \ USE_FEATURE_FANCY_TAIL( \ - "\n -q Never output headers giving file names" \ - "\n -s SEC Wait SEC seconds between reads with -f" \ - "\n -v Always output headers giving file names" \ - "\n\n" \ + "\n -q Never output headers giving file names" \ + "\n -s SEC Wait SEC seconds between reads with -f" \ + "\n -v Always output headers giving file names" \ + "\n\n" \ "If the first character of N (bytes or lines) is a '+', output begins with\n" \ "the Nth item from the start of each file, otherwise, print the last N items\n" \ - "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) + "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \ + #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" @@ -3762,29 +3804,35 @@ USE_FEATURE_BRCTL_FANCY("\n" \ USE_FEATURE_TAR_FROM("[-X FILE] ") \ "[-f TARFILE] [-C DIR] [FILE(s)]..." #define tar_full_usage \ - "Create, extract, or list files from a tar file" \ - "\n\nOptions:\n" \ + "Create, extract, or list files from a tar file\n" \ + "\nOptions:" \ USE_FEATURE_TAR_CREATE( \ - " c Create\n") \ - " x Extract\n" \ - " t List\n" \ - "\nArchive format selection:\n" \ + "\n c Create") \ + "\n x Extract" \ + "\n t List" \ + "\nArchive format selection:" \ USE_FEATURE_TAR_GZIP( \ - " z Filter the archive through gzip\n") \ + "\n z Filter the archive through gzip" \ + ) \ USE_FEATURE_TAR_BZIP2( \ - " j Filter the archive through bzip2\n") \ + "\n j Filter the archive through bzip2" \ + ) \ USE_FEATURE_TAR_LZMA( \ - " a Filter the archive through lzma\n") \ + "\n a Filter the archive through lzma" \ + ) \ USE_FEATURE_TAR_COMPRESS( \ - " Z Filter the archive through compress\n") \ - "\nFile selection:\n" \ - " f Name of TARFILE or \"-\" for stdin\n" \ - " O Extract to stdout\n" \ + "\n Z Filter the archive through compress" \ + ) \ + "\nFile selection:" \ + "\n f Name of TARFILE or \"-\" for stdin" \ + "\n O Extract to stdout" \ USE_FEATURE_TAR_FROM( \ - " exclude File to exclude\n" \ - " X File with names to exclude\n") \ - " C Change to directory DIR before operation\n" \ - " v Verbose" + "\n exclude File to exclude" \ + "\n X File with names to exclude" \ + ) \ + "\n C Change to directory DIR before operation" \ + "\n v Verbose" \ + #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" @@ -3792,9 +3840,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define taskset_trivial_usage \ "[OPTIONS] [mask] [pid | command [arg]...]" #define taskset_full_usage \ - "Set or get CPU affinity" \ - "\n\nOptions:\n" \ - " -p Operate on an existing PID" + "Set or get CPU affinity\n" \ + "\nOptions:" \ + "\n -p Operate on an existing PID" \ + #define taskset_example_usage \ "$ taskset 0x7 ./dgemm_test&\n" \ "$ taskset -p 0x1 $!\n" \ @@ -3809,10 +3858,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define tee_trivial_usage \ "[OPTION]... [FILE]..." #define tee_full_usage \ - "Copy standard input to each FILE, and also to standard output" \ - "\n\nOptions:\n" \ - " -a Append to the given FILEs, do not overwrite\n" \ - " -i Ignore interrupt signals (SIGINT)" + "Copy standard input to each FILE, and also to standard output\n" \ + "\nOptions:" \ + "\n -a Append to the given FILEs, do not overwrite" \ + "\n -i Ignore interrupt signals (SIGINT)" \ + #define tee_example_usage \ "$ echo \"Hello\" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ @@ -3825,7 +3875,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "Connect to telnet server\n" \ "\nOptions:" \ "\n -a Attempt an automatic login with USER variable" \ - "\n -l USER Attempt an automatic login with USER argument" + "\n -l USER Attempt an automatic login with USER argument" \ + #else #define telnet_trivial_usage \ "HOST [PORT]" @@ -3837,17 +3888,17 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[OPTION]" #define telnetd_full_usage \ "Handle incoming telnet connections" \ - SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \ - "\n\nOptions:" \ - "\n -l LOGIN Exec LOGIN on connect" \ - "\n -f issue_file Display issue_file instead of /etc/issue" \ - "\n -K Close connection as soon as login exits" \ - "\n (normally wait until all programs close slave pty)" \ + SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \ + "\nOptions:" \ + "\n -l LOGIN Exec LOGIN on connect" \ + "\n -f issue_file Display issue_file instead of /etc/issue" \ + "\n -K Close connection as soon as login exits" \ + "\n (normally wait until all programs close slave pty)" \ USE_FEATURE_TELNETD_STANDALONE( \ - "\n -p PORT Port to listen to" \ - "\n -b ADDR Address to bind to" \ - "\n -F Run in foreground" \ - "\n -i Run as inetd subservice" \ + "\n -p PORT Port to listen on" \ + "\n -b ADDR Address to bind to" \ + "\n -F Run in foreground" \ + "\n -i Run as inetd subservice" \ ) #define test_trivial_usage \ @@ -3888,7 +3939,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n immediately. 'msg' is written to the peer before close" \ "\n-h Look up peer's hostname" \ "\n-E Do not set up environment variables" \ - "\n-v Verbose" + "\n-v Verbose" \ #define udpsvd_trivial_usage \ "[-hEv] [-c n] [-u user] [-l name] ip port prog" @@ -3904,45 +3955,46 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "\n-c n Handle up to n connections simultaneously" \ "\n-h Look up peer's hostname" \ "\n-E Do not set up environment variables" \ - "\n-v Verbose" + "\n-v Verbose" \ #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" #define tftp_full_usage \ - "Transfer a file from/to tftp server using \"octet\" mode" \ - "\n\nOptions:" \ - "\n -l FILE Local FILE" \ - "\n -r FILE Remote FILE" \ + "Transfer a file from/to tftp server using \"octet\" mode\n" \ + "\nOptions:" \ + "\n -l FILE Local FILE" \ + "\n -r FILE Remote FILE" \ USE_FEATURE_TFTP_GET( \ - "\n -g Get file" \ + "\n -g Get file" \ ) \ USE_FEATURE_TFTP_PUT( \ - "\n -p Put file" \ + "\n -p Put file" \ ) \ USE_FEATURE_TFTP_BLOCKSIZE( \ - "\n -b SIZE Transfer blocks of SIZE octets" \ + "\n -b SIZE Transfer blocks of SIZE octets" \ ) #define time_trivial_usage \ "[OPTION]... COMMAND [ARGS...]" #define time_full_usage \ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ - "COMMAND's resource usage information is displayed." \ - "\n\nOptions:\n" \ - " -v Verbose" + "COMMAND's resource usage information is displayed.\n" \ + "\nOptions:" \ + "\n -v Verbose" \ #define top_trivial_usage \ "[-b] [-n COUNT] [-d SECONDS]" #define top_full_usage \ "Provide a view of process activity in real time.\n" \ "Read the status of all processes from /proc each SECONDS\n" \ - "and show the status for however many processes will fit on the screen." + "and show the status for however many processes will fit on the screen." \ #define touch_trivial_usage \ "[-c] FILE [FILE...]" #define touch_full_usage \ - "Update the last-modified date on the given FILE[s]" \ - "\n\nOptions:\n" \ - " -c Do not create any files" + "Update the last-modified date on the given FILE[s]\n" \ + "\nOptions:" \ + "\n -c Do not create any files" \ + #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ @@ -3954,11 +4006,12 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-cds] STRING1 [STRING2]" #define tr_full_usage \ "Translate, squeeze, and/or delete characters from\n" \ - "standard input, writing to standard output" \ - "\n\nOptions:\n" \ - " -c Take complement of STRING1\n" \ - " -d Delete input characters coded STRING1\n" \ - " -s Squeeze multiple output characters of STRING2 into one character" + "standard input, writing to standard output\n" \ + "\nOptions:" \ + "\n -c Take complement of STRING1" \ + "\n -d Delete input characters coded STRING1" \ + "\n -s Squeeze multiple output characters of STRING2 into one character" \ + #define tr_example_usage \ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ "hello world\n" @@ -3966,26 +4019,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define traceroute_trivial_usage \ "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ - " [-z pausemsecs] host [data size]" + " [-z pausemsecs] HOST [data size]" #define traceroute_full_usage \ - "Trace the route to \"host\"" \ - "\n\nOptions:\n" \ - " -F Set the don't fragment bit\n" \ - " -I Use ICMP ECHO instead of UDP datagrams\n" \ - " -l Display the ttl value of the returned packet\n" \ - " -d Set SO_DEBUG options to socket\n" \ - " -n Print hop addresses numerically rather than symbolically\n" \ - " -r Bypass the normal routing tables and send directly to a host\n" \ - " -v Verbose\n" \ - " -m max_ttl Max time-to-live (max number of hops)\n" \ - " -p port# Base UDP port number used in probes\n" \ - " (default is 33434)\n" \ - " -q nqueries Number of probes per 'ttl' (default 3)\n" \ - " -s src_addr IP address to use as the source address\n" \ - " -t tos Type-of-service in probe packets (default 0)\n" \ - " -w wait Time in seconds to wait for a response\n" \ - " (default 3 sec)\n" \ - " -g Loose source route gateway (8 max)" + "Trace the route to HOST\n" \ + "\nOptions:" \ + "\n -F Set the don't fragment bit" \ + "\n -I Use ICMP ECHO instead of UDP datagrams" \ + "\n -l Display the ttl value of the returned packet" \ + "\n -d Set SO_DEBUG options to socket" \ + "\n -n Print hop addresses numerically rather than symbolically" \ + "\n -r Bypass the normal routing tables and send directly to a host" \ + "\n -v Verbose" \ + "\n -m max_ttl Max time-to-live (max number of hops)" \ + "\n -p port# Base UDP port number used in probes" \ + "\n (default is 33434)" \ + "\n -q nqueries Number of probes per 'ttl' (default 3)" \ + "\n -s src_addr IP address to use as the source address" \ + "\n -t tos Type-of-service in probe packets (default 0)" \ + "\n -w wait Time in seconds to wait for a response" \ + "\n (default 3 sec)" \ + "\n -g Loose source route gateway (8 max)" \ #define true_trivial_usage \ "" @@ -4000,9 +4053,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "" #define tty_full_usage \ "Print file name of standard input's terminal" \ - USE_INCLUDE_SUSv2( \ - "\n\nOptions:\n" \ - " -s Print nothing, only return exit status") + USE_INCLUDE_SUSv2( "\n" \ + "\nOptions:" \ + "\n -s Print nothing, only return exit status" \ + ) #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" @@ -4028,54 +4082,54 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define udhcpc_full_usage \ USE_GETOPT_LONG( \ " -V,--vendorclass=CLASSID Vendor class identifier" \ - "\n -i,--interface=INTERFACE Interface to use (default eth0)" \ - "\n -H,-h,--hostname=HOSTNAME Client hostname" \ - "\n -c,--clientid=CLIENTID Client identifier" \ - "\n -C,--clientid-none Suppress default client identifier" \ - "\n -p,--pidfile=file Create pidfile" \ - "\n -r,--request=IP IP address to request" \ - "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ - "\n -t,--retries=N Send up to N request packets" \ - "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \ - "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \ - "\n -f,--foreground Run in foreground" \ - "\n -b,--background Background if lease is not immediately obtained" \ - "\n -S,--syslog Log to syslog too" \ - "\n -n,--now Exit with failure if lease is not immediately obtained" \ - "\n -q,--quit Quit after obtaining lease" \ - "\n -R,--release Release IP on quit" \ - "\n -O,--request-option=OPT Request DHCP option OPT from server" \ + "\n -i,--interface=INTERFACE Interface to use (default eth0)" \ + "\n -H,-h,--hostname=HOSTNAME Client hostname" \ + "\n -c,--clientid=CLIENTID Client identifier" \ + "\n -C,--clientid-none Suppress default client identifier" \ + "\n -p,--pidfile=file Create pidfile" \ + "\n -r,--request=IP IP address to request" \ + "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ + "\n -t,--retries=N Send up to N request packets" \ + "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \ + "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \ + "\n -f,--foreground Run in foreground" \ + "\n -b,--background Background if lease is not immediately obtained" \ + "\n -S,--syslog Log to syslog too" \ + "\n -n,--now Exit with failure if lease is not immediately obtained" \ + "\n -q,--quit Quit after obtaining lease" \ + "\n -R,--release Release IP on quit" \ + "\n -O,--request-option=OPT Request DHCP option OPT from server" \ USE_FEATURE_UDHCP_PORT( \ - "\n -P,--client-port N Use port N instead of default 68" \ + "\n -P,--client-port N Use port N instead of default 68" \ ) \ USE_FEATURE_UDHCPC_ARPING( \ - "\n -a,--arping Use arping to validate offered address" \ + "\n -a,--arping Use arping to validate offered address" \ ) \ ) \ SKIP_GETOPT_LONG( \ " -V CLASSID Vendor class identifier" \ - "\n -i INTERFACE Interface to use (default: eth0)" \ - "\n -H,-h HOSTNAME Client hostname" \ - "\n -c CLIENTID Client identifier" \ - "\n -C Suppress default client identifier" \ - "\n -p file Create pidfile" \ - "\n -r IP IP address to request" \ - "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ - "\n -t N Send up to N request packets" \ - "\n -T N Try to get a lease for N seconds (default 3)" \ - "\n -A N Wait N seconds (default 20) after failure" \ - "\n -f Run in foreground" \ - "\n -b Background if lease is not immediately obtained" \ - "\n -S Log to syslog too" \ - "\n -n Exit with failure if lease is not immediately obtained" \ - "\n -q Quit after obtaining lease" \ - "\n -R Release IP on quit" \ - "\n -O OPT Request DHCP option OPT from server" \ + "\n -i INTERFACE Interface to use (default: eth0)" \ + "\n -H,-h HOSTNAME Client hostname" \ + "\n -c CLIENTID Client identifier" \ + "\n -C Suppress default client identifier" \ + "\n -p file Create pidfile" \ + "\n -r IP IP address to request" \ + "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ + "\n -t N Send up to N request packets" \ + "\n -T N Try to get a lease for N seconds (default 3)" \ + "\n -A N Wait N seconds (default 20) after failure" \ + "\n -f Run in foreground" \ + "\n -b Background if lease is not immediately obtained" \ + "\n -S Log to syslog too" \ + "\n -n Exit with failure if lease is not immediately obtained" \ + "\n -q Quit after obtaining lease" \ + "\n -R Release IP on quit" \ + "\n -O OPT Request DHCP option OPT from server" \ USE_FEATURE_UDHCP_PORT( \ - "\n -P N Use port N instead of default 68" \ + "\n -P N Use port N instead of default 68" \ ) \ USE_FEATURE_UDHCPC_ARPING( \ - "\n -a Use arping to validate offered address" \ + "\n -a Use arping to validate offered address" \ ) \ ) @@ -4083,42 +4137,47 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-fS]" USE_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \ #define udhcpd_full_usage \ - "DHCP server" \ - "\n -f Run in foreground" \ - "\n -S Log to syslog too" \ + "DHCP server\n" \ + "\n -f Run in foreground" \ + "\n -S Log to syslog too" \ USE_FEATURE_UDHCP_PORT( \ - "\n -P N Use port N instead of default 67" \ + "\n -P N Use port N instead of default 67" \ ) #define umount_trivial_usage \ "[flags] FILESYSTEM|DIRECTORY" #define umount_full_usage \ - "Unmount file systems" \ - "\n\nOptions:" \ + "Unmount file systems\n" \ + "\nOptions:" \ USE_FEATURE_UMOUNT_ALL( \ - "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \ + "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ + ) \ USE_FEATURE_MTAB_SUPPORT( \ - "\n -n Don't erase /etc/mtab entries") \ - "\n -r Try to remount devices as read-only if mount is busy" \ - "\n -l Lazy umount (detach filesystem)" \ - "\n -f Force umount (i.e., unreachable NFS server)" \ + "\n -n Don't erase /etc/mtab entries" \ + ) \ + "\n -r Try to remount devices as read-only if mount is busy" \ + "\n -l Lazy umount (detach filesystem)" \ + "\n -f Force umount (i.e., unreachable NFS server)" \ USE_FEATURE_MOUNT_LOOP( \ - "\n -d Free loop device if it has been used") + "\n -d Free loop device if it has been used" \ + ) + #define umount_example_usage \ "$ umount /dev/hdc1\n" #define uname_trivial_usage \ "[-amnrspv]" #define uname_full_usage \ - "Print system information." \ - "\n\nOptions:\n" \ - " -a Print all\n" \ - " -m The machine (hardware) type\n" \ - " -n Hostname\n" \ - " -r OS release\n" \ - " -s OS name (default)\n" \ - " -p Processor type\n" \ - " -v OS version" + "Print system information.\n" \ + "\nOptions:" \ + "\n -a Print all" \ + "\n -m The machine (hardware) type" \ + "\n -n Hostname" \ + "\n -r OS release" \ + "\n -s OS name (default)" \ + "\n -p Processor type" \ + "\n -v OS version" \ + #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" @@ -4126,38 +4185,39 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define uncompress_trivial_usage \ "[-c] [-f] [name...]" #define uncompress_full_usage \ - "Uncompress .Z file[s]" \ - "\n\nOptions:\n" \ - " -c Extract to stdout\n" \ - " -f Overwrite an existing file" + "Uncompress .Z file[s]\n" \ + "\nOptions:" \ + "\n -c Extract to stdout" \ + "\n -f Overwrite an existing file" \ #define unexpand_trivial_usage \ "[-f][-a][-t NUM] [FILE|-]" #define unexpand_full_usage \ - "Convert spaces to tabs, writing to standard output." \ - "\n\nOptions:" \ + "Convert spaces to tabs, writing to standard output.\n" \ + "\nOptions:" \ USE_FEATURE_UNEXPAND_LONG_OPTIONS( \ - "\n -a,--all Convert all blanks" \ - "\n -f,--first-only Convert only leading blanks" \ - "\n -t,--tabs=N Tabstops every N chars" \ + "\n -a,--all Convert all blanks" \ + "\n -f,--first-only Convert only leading blanks" \ + "\n -t,--tabs=N Tabstops every N chars" \ ) \ SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \ - "\n -a Convert all blanks" \ - "\n -f Convert only leading blanks" \ - "\n -t N Tabstops every N chars" \ + "\n -a Convert all blanks" \ + "\n -f Convert only leading blanks" \ + "\n -t N Tabstops every N chars" \ ) #define uniq_trivial_usage \ "[-fscdu]... [INPUT [OUTPUT]]" #define uniq_full_usage \ "Discard all but one of successive identical lines from INPUT\n" \ - "(or standard input), writing to OUTPUT (or standard output)" \ - "\n\nOptions:\n" \ - " -c Prefix lines by the number of occurrences\n" \ - " -d Only print duplicate lines\n" \ - " -u Only print unique lines\n" \ - " -f N Skip the first N fields\n" \ - " -s N Skip the first N chars (after any skipped fields)" + "(or standard input), writing to OUTPUT (or standard output)\n" \ + "\nOptions:" \ + "\n -c Prefix lines by the number of occurrences" \ + "\n -d Only print duplicate lines" \ + "\n -u Only print unique lines" \ + "\n -f N Skip the first N fields" \ + "\n -s N Skip the first N chars (after any skipped fields)" \ + #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ @@ -4171,25 +4231,26 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "When no file is given, use stdin/stdout.\n" \ "\nOptions:" \ "\n -u dos2unix" \ - "\n -d unix2dos" + "\n -d unix2dos" \ #define unzip_trivial_usage \ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage \ - "Extract files from ZIP archives" \ - "\n\nOptions:\n" \ - " -l List archive contents (with -q for short form)\n" \ - " -n Never overwrite existing files (default)\n" \ - " -o Overwrite files without prompting\n" \ - " -p Send output to stdout\n" \ - " -q Quiet\n" \ - " -x Exclude these files\n" \ - " -d Extract files into this directory" + "Extract files from ZIP archives\n" \ + "\nOptions:" \ + "\n -l List archive contents (with -q for short form)" \ + "\n -n Never overwrite existing files (default)" \ + "\n -o Overwrite files without prompting" \ + "\n -p Send output to stdout" \ + "\n -q Quiet" \ + "\n -x Exclude these files" \ + "\n -d Extract files into this directory" \ #define uptime_trivial_usage \ "" #define uptime_full_usage \ "Display the time since the last boot" + #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" @@ -4198,6 +4259,7 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "N" #define usleep_full_usage \ "Pause for N microseconds" + #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" @@ -4206,7 +4268,8 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-o outfile] [infile]" #define uudecode_full_usage \ "Uudecode a file\n" \ - "NB: finds outfile name in uuencoded source unless -o is given" + "Finds outfile name in uuencoded source unless -o is given" + #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ @@ -4215,9 +4278,10 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define uuencode_trivial_usage \ "[-m] [infile] stored_filename" #define uuencode_full_usage \ - "Uuencode a file to stdout" \ - "\n\nOptions:\n" \ - " -m Use base64 encoding per RFC1521" + "Uuencode a file to stdout\n" \ + "\nOptions:" \ + "\n -m Use base64 encoding per RFC1521" \ + #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ @@ -4228,40 +4292,41 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define vconfig_trivial_usage \ "COMMAND [OPTIONS]..." #define vconfig_full_usage \ - "Create and remove virtual ethernet devices" \ - "\n\nOptions:\n" \ - " add [interface-name] [vlan_id]\n" \ - " rem [vlan-name]\n" \ - " set_flag [interface-name] [flag-num] [0 | 1]\n" \ - " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ - " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ - " set_name_type [name-type]" + "Create and remove virtual ethernet devices\n" \ + "\nOptions:" \ + "\n add [interface-name] [vlan_id]" \ + "\n rem [vlan-name]" \ + "\n set_flag [interface-name] [flag-num] [0 | 1]" \ + "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \ + "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \ + "\n set_name_type [name-type]" \ #define vi_trivial_usage \ "[OPTION] [FILE]..." #define vi_full_usage \ - "Edit FILE" \ - "\n\nOptions:\n" \ + "Edit FILE\n" \ + "\nOptions:" \ USE_FEATURE_VI_COLON( \ - " -c Initial command to run ($EXINIT also available)\n") \ + "\n -c Initial command to run ($EXINIT also available)") \ USE_FEATURE_VI_READONLY( \ - " -R Read-only - do not write to the file\n") \ - " -H Short help regarding available features" + "\n -R Read-only - do not write to the file") \ + "\n -H Short help regarding available features" \ #define vlock_trivial_usage \ "[OPTIONS]" #define vlock_full_usage \ - "Lock a virtual terminal. A password is required to unlock." \ - "\n\nOptions:\n" \ - " -a Lock all VTs" + "Lock a virtual terminal. A password is required to unlock.\n" \ + "\nOptions:" \ + "\n -a Lock all VTs" \ #define watch_trivial_usage \ "[-n seconds] [-t] COMMAND..." #define watch_full_usage \ - "Execute a program periodically" \ - "\n\nOptions:\n" \ - " -n Loop period in seconds (default 2)\n" \ - " -t Don't print header" + "Execute a program periodically\n" \ + "\nOptions:" \ + "\n -n Loop period in seconds (default 2)" \ + "\n -t Don't print header" \ + #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ @@ -4271,23 +4336,24 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define watchdog_trivial_usage \ "[-t N[ms]] [-F] DEV" #define watchdog_full_usage \ - "Periodically write to watchdog device DEV" \ - "\n\nOptions:" \ + "Periodically write to watchdog device DEV\n" \ + "\nOptions:" \ "\n -t N Timer period (default 30)" \ "\n -F Run in foreground" \ "\n" \ - "\nUse -t 500ms to specify period in milliseconds" + "\nUse -t 500ms to specify period in milliseconds" \ #define wc_trivial_usage \ "[OPTION]... [FILE]..." #define wc_full_usage \ "Print line, word, and byte counts for each FILE, and a total line if\n" \ - "more than one FILE is specified. With no FILE, read standard input." \ - "\n\nOptions:\n" \ - " -c Print the byte counts\n" \ - " -l Print the newline counts\n" \ - " -L Print the length of the longest line\n" \ - " -w Print the word counts" + "more than one FILE is specified. With no FILE, read standard input.\n" \ + "\nOptions:" \ + "\n -c Print the byte counts" \ + "\n -l Print the newline counts" \ + "\n -L Print the length of the longest line" \ + "\n -w Print the word counts" \ + #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" @@ -4302,15 +4368,15 @@ USE_FEATURE_BRCTL_FANCY("\n" \ "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \ ) #define wget_full_usage \ - "Retrieve files via HTTP or FTP" \ - "\n\nOptions:\n" \ - " -s Spider mode - only check file existence\n" \ - " -c Continue retrieval of aborted transfer\n" \ - " -q Quiet\n" \ - " -P Set directory prefix to DIR\n" \ - " -O Save to filename ('-' for stdout)\n" \ - " -U Adjust 'User-Agent' field\n" \ - " -Y Use proxy ('on' or 'off')" + "Retrieve files via HTTP or FTP\n" \ + "\nOptions:" \ + "\n -s Spider mode - only check file existence" \ + "\n -c Continue retrieval of aborted transfer" \ + "\n -q Quiet" \ + "\n -P Set directory prefix to DIR" \ + "\n -O Save to filename ('-' for stdout)" \ + "\n -U Adjust 'User-Agent' field" \ + "\n -Y Use proxy ('on' or 'off')" \ #define which_trivial_usage \ "[COMMAND...]" @@ -4323,9 +4389,9 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define who_trivial_usage \ "[-a]" #define who_full_usage \ - "Show who is logged on" \ - "\n\nOptions:\n" \ - " -a show all" + "Show who is logged on\n" \ + "\nOptions:" \ + "\n -a show all" \ #define whoami_trivial_usage \ "" @@ -4335,16 +4401,17 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define xargs_trivial_usage \ "[OPTIONS] [COMMAND] [ARGS...]" #define xargs_full_usage \ - "Execute COMMAND on every item given by standard input" \ - "\n\nOptions:\n" \ + "Execute COMMAND on every item given by standard input\n" \ + "\nOptions:" \ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ - " -p Prompt the user about whether to run each command\n") \ - " -r Do not run command for empty read lines\n" \ + "\n -p Prompt the user about whether to run each command") \ + "\n -r Do not run command for empty read lines" \ USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ - " -x Exit if the size is exceeded\n") \ + "\n -x Exit if the size is exceeded") \ USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ - " -0 Input filenames are terminated by a null character\n") \ - " -t Print the command line on stderr before executing it" + "\n -0 Input filenames are terminated by a null character") \ + "\n -t Print the command line on stderr before executing it" \ + #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" @@ -4362,11 +4429,11 @@ USE_FEATURE_BRCTL_FANCY("\n" \ #define zcip_trivial_usage \ "[OPTIONS] ifname script" #define zcip_full_usage \ - "Manage a ZeroConf IPv4 link-local address" \ - "\n\nOptions:\n" \ - " -f Run in foreground\n" \ - " -q Quit after address (no daemon)\n" \ - " -r 169.254.x.x Request this address first\n" \ - " -v Verbose" + "Manage a ZeroConf IPv4 link-local address\n" \ + "\nOptions:" \ + "\n -f Run in foreground" \ + "\n -q Quit after address (no daemon)" \ + "\n -r 169.254.x.x Request this address first" \ + "\n -v Verbose" \ #endif /* __BB_USAGE_H__ */ diff --git a/loginutils/getty.c b/loginutils/getty.c index f033b5afd..246bb4711 100644 --- a/loginutils/getty.c +++ b/loginutils/getty.c @@ -61,7 +61,7 @@ extern void updwtmp(const char *filename, const struct utmp *ut); #define ISSUE "/etc/issue" /* displayed before the login prompt */ /* Some shorthands for control characters. */ -#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */ +#define CTL(x) ((x) ^ 0100) /* Assumes ASCII dialect */ #define CR CTL('M') /* carriage return */ #define NL CTL('J') /* line feed */ #define BS CTL('H') /* back space */ @@ -100,6 +100,13 @@ struct chardata { unsigned char kill; /* kill character */ unsigned char eol; /* end-of-line character */ unsigned char parity; /* what parity did we see */ + /* (parity & 1): saw odd parity char with 7th bit set */ + /* (parity & 2): saw even parity char with 7th bit set */ + /* parity == 0: probably 7-bit, space parity? */ + /* parity == 1: probably 7-bit, odd parity? */ + /* parity == 2: probably 7-bit, even parity? */ + /* parity == 3: definitely 8 bit, no parity! */ + /* Hmm... with any value of "parity" 8 bit, no parity is possible */ #ifdef HANDLE_ALLCAPS unsigned char capslock; /* upper case without lower case */ #endif @@ -135,27 +142,21 @@ static const char opt_string[] ALIGN1 = "I:LH:f:hil:mt:wn"; /* The following is used for understandable diagnostics. */ #ifdef DEBUGGING -#define debug(s) fprintf(dbf,s); fflush(dbf) -#define DEBUGTERM "/dev/ttyp0" static FILE *dbf; +#define DEBUGTERM "/dev/ttyp0" +#define debug(...) do { fprintf(dbf, __VA_ARGS__); fflush(dbf); } while (0) #else -#define debug(s) /* nothing */ +#define debug(...) ((void)0) #endif -/* bcode - convert speed string to speed code; return 0 on failure */ +/* bcode - convert speed string to speed code; return <= 0 on failure */ static int bcode(const char *s) { - int r; - unsigned value = bb_strtou(s, NULL, 10); - if (errno) { - return -1; - } - r = tty_value_to_baud(value); - if (r > 0) { - return r; - } - return 0; + int value = bb_strtou(s, NULL, 10); /* yes, int is intended! */ + if (value < 0) /* bad terminating char, overflow, etc */ + return value; + return tty_value_to_baud(value); } /* parse_speeds - parse alternate baud rates */ @@ -181,10 +182,10 @@ static void parse_args(char **argv, struct options *op, char **fakehost_p) { char *ts; - opt_complementary = "-2"; /* at least 2 args */ + opt_complementary = "-2:t+"; /* at least 2 args; -t N */ op->flags = getopt32(argv, opt_string, &(op->initstring), fakehost_p, &(op->issue), - &(op->login), &ts); + &(op->login), &op->timeout); argv += optind; if (op->flags & F_INITSTRING) { const char *p = op->initstring; @@ -203,10 +204,7 @@ static void parse_args(char **argv, struct options *op, char **fakehost_p) } *q = '\0'; } - op->flags ^= F_ISSUE; /* invert flag show /etc/issue */ - if (op->flags & F_TIMEOUT) { - op->timeout = xatoi_u(ts); - } + op->flags ^= F_ISSUE; /* invert flag "show /etc/issue" */ debug("after getopt\n"); /* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */ @@ -219,8 +217,11 @@ static void parse_args(char **argv, struct options *op, char **fakehost_p) } parse_speeds(op, ts); +// TODO: if applet_name is set to "getty: TTY", bb_error_msg's get simpler! +// grep for "%s:" + if (argv[2]) - setenv("TERM", argv[2], 1); + xsetenv("TERM", argv[2]); debug("exiting parse_args\n"); } @@ -230,37 +231,37 @@ static void open_tty(const char *tty) { /* Set up new standard input, unless we are given an already opened port. */ if (NOT_LONE_DASH(tty)) { - struct stat st; - int cur_dir_fd; - int fd; +// struct stat st; +// int cur_dir_fd; +// int fd; /* Sanity checks... */ - cur_dir_fd = xopen(".", O_DIRECTORY | O_NONBLOCK); - xchdir("/dev"); - xstat(tty, &st); - if ((st.st_mode & S_IFMT) != S_IFCHR) - bb_error_msg_and_die("%s: not a character device", tty); +// cur_dir_fd = xopen(".", O_DIRECTORY | O_NONBLOCK); +// xchdir("/dev"); +// xstat(tty, &st); +// if ((st.st_mode & S_IFMT) != S_IFCHR) +// bb_error_msg_and_die("%s: not a character device", tty); + + if (tty[0] != '/') + tty = xasprintf("/dev/%s", tty); /* will leak it */ /* Open the tty as standard input. */ debug("open(2)\n"); - fd = xopen(tty, O_RDWR | O_NONBLOCK); + close(0); + /*fd =*/ xopen(tty, O_RDWR | O_NONBLOCK); /* uses fd 0 */ - /* Restore current directory */ - fchdir(cur_dir_fd); +// /* Restore current directory */ +// fchdir(cur_dir_fd); /* Open the tty as standard input, continued */ - xdup2(fd, 0); - /* fd is >= cur_dir_fd, and cur_dir_fd gets closed too here: */ - while (fd > 2) - close(fd--); - - /* Set proper protections and ownership. Mode 0622 - * is suitable for SYSV < 4 because /bin/login does not change - * protections. SunOS 4 login will change the protections to 0620 - * (write access for group tty) after the login has succeeded. - */ +// xmove_fd(fd, 0); +// /* fd is >= cur_dir_fd, and cur_dir_fd gets closed too here: */ +// while (fd > 2) +// close(fd--); + + /* Set proper protections and ownership. */ fchown(0, 0, 0); /* 0:0 */ - fchmod(0, 0622); /* crw--w--w- */ + fchmod(0, 0620); /* crw--w---- */ } else { /* * Standard input should already be connected to an open port. Make @@ -286,9 +287,8 @@ static void termios_init(struct termios *tp, int speed, struct options *op) #endif tp->c_cflag = CS8 | HUPCL | CREAD | speed; - if (op->flags & F_LOCAL) { + if (op->flags & F_LOCAL) tp->c_cflag |= CLOCAL; - } tp->c_iflag = tp->c_lflag = tp->c_line = 0; tp->c_oflag = OPOST | ONLCR; @@ -397,11 +397,11 @@ static char *get_logname(char *logname, unsigned size_logname, char ascval; /* low 7 bits of input character */ int bits; /* # of "1" bits per character */ int mask; /* mask with 1 bit up */ - static const char erase[][3] = { /* backspace-space-backspace */ + static const char erase[][3] = {/* backspace-space-backspace */ "\010\040\010", /* space parity */ "\010\040\010", /* odd parity */ "\210\240\210", /* even parity */ - "\210\240\210", /* no parity */ + "\010\040\010", /* 8 bit no parity */ }; /* NB: *cp is pre-initialized with init_chardata */ @@ -434,12 +434,11 @@ static char *get_logname(char *logname, unsigned size_logname, return NULL; /* Do parity bit handling. */ - ascval = c & 0177; - if (!(op->flags & F_LOCAL) && (c != ascval)) { /* "parity" bit on ? */ + if (!(op->flags & F_LOCAL) && (c & 0x80)) { /* "parity" bit on? */ bits = 1; mask = 1; - while (mask & 0177) { - if (mask & ascval) + while (mask & 0x7f) { + if (mask & c) bits++; /* count "1" bits */ mask <<= 1; } @@ -448,6 +447,7 @@ static char *get_logname(char *logname, unsigned size_logname, } /* Do erase, kill and end-of-line processing. */ + ascval = c & 0x7f; switch (ascval) { case CR: case NL: @@ -507,7 +507,6 @@ static char *get_logname(char *logname, unsigned size_logname, static void termios_final(struct options *op, struct termios *tp, struct chardata *cp) { /* General terminal-independent stuff. */ - tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */ tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE; /* no longer| ECHOCTL | ECHOPRT */ @@ -520,7 +519,6 @@ static void termios_final(struct options *op, struct termios *tp, struct chardat tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */ /* Account for special characters seen in input. */ - if (cp->eol == CR) { tp->c_iflag |= ICRNL; /* map CR in input to NL */ tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */ @@ -529,9 +527,9 @@ static void termios_final(struct options *op, struct termios *tp, struct chardat tp->c_cc[VKILL] = cp->kill; /* set kill character */ /* Account for the presence or absence of parity bits in input. */ - switch (cp->parity) { case 0: /* space (always 0) parity */ +// I bet most people go here - they use only 7-bit chars in usernames.... break; case 1: /* odd parity */ tp->c_cflag |= PARODD; @@ -543,6 +541,9 @@ static void termios_final(struct options *op, struct termios *tp, struct chardat case (1 | 2): /* no parity bit */ tp->c_cflag &= ~CSIZE; tp->c_cflag |= CS7; +// FIXME: wtf? case 3: we saw both even and odd 8-bit bytes - +// it's probably some umlauts etc, but definitely NOT 7-bit!!! +// Entire parity detection madness here just begs for deletion... break; } @@ -555,14 +556,12 @@ static void termios_final(struct options *op, struct termios *tp, struct chardat } #endif /* Optionally enable hardware flow control */ - #ifdef CRTSCTS if (op->flags & F_RTSCTS) tp->c_cflag |= CRTSCTS; #endif /* Finally, make the new settings effective */ - ioctl_or_perror_and_die(0, TCSETS, tp, "%s: TCSETS", op->tty); } @@ -634,6 +633,8 @@ int getty_main(int argc, char **argv) struct termios termios; /* terminal mode bits */ struct options options; + chardata = init_chardata; + memset(&options, 0, sizeof(options)); options.login = _PATH_LOGIN; /* default login program */ options.tty = "tty1"; /* default tty line */ @@ -642,9 +643,9 @@ int getty_main(int argc, char **argv) options.issue = ISSUE; /* default issue file */ #endif - /* Already too late because of theoretical - * possibility of getty --help somehow triggered - * inadvertently before we reach this. Oh well. */ + /* Parse command-line arguments. */ + parse_args(argv, &options, &fakehost); + logmode = LOGMODE_NONE; /* Create new session, lose controlling tty, if any */ @@ -652,16 +653,18 @@ int getty_main(int argc, char **argv) * "This is allowed only when the current process * is not a process group leader" - is this a problem? */ setsid(); - + /* close stdio, and stray descriptors, just in case */ n = xopen(bb_dev_null, O_RDWR); - /* dup2(n, 0); - no, because of possible "getty - 9600" */ - dup2(n, 1); - dup2(n, 2); + /* dup2(n, 0); - no, we need to handle "getty - 9600" too */ + xdup2(n, 1); + xdup2(n, 2); while (n > 2) close(n--); - /* We want special flavor of error_msg_and_die */ + + /* Logging. We want special flavor of error_msg_and_die */ die_sleep = 10; msg_eol = "\r\n"; + /* most likely will internally use fd #3 in CLOEXEC mode: */ openlog(applet_name, LOG_PID, LOG_AUTH); logmode = LOGMODE_BOTH; @@ -673,15 +676,12 @@ int getty_main(int argc, char **argv) } #endif - /* Parse command-line arguments. */ - parse_args(argv, &options, &fakehost); - - debug("calling open_tty\n"); /* Open the tty as standard input, if it is not "-" */ + /* If it's not "-" and not taken yet, it will become our ctty */ + debug("calling open_tty\n"); open_tty(options.tty); - - debug("duping\n"); ndelay_off(0); + debug("duping\n"); xdup2(0, 1); xdup2(0, 2); @@ -695,17 +695,18 @@ int getty_main(int argc, char **argv) */ ioctl_or_perror_and_die(0, TCGETS, &termios, "%s: TCGETS", options.tty); -#if ENABLE_FEATURE_UTMP - /* Update the utmp file */ - update_utmp(options.tty, fakehost); -#endif - #ifdef __linux__ - /* Make ourself a foreground process group within our session */ - tcsetpgrp(0, getpid()); +// FIXME: do we need this? Otherwise "-" case seems to be broken... // /* Forcibly make fd 0 our controlling tty, even if another session // * has it as a ctty. (Another session loses ctty). */ // ioctl(0, TIOCSCTTY, (void*)1); + /* Make ourself a foreground process group within our session */ + tcsetpgrp(0, getpid()); +#endif + +#if ENABLE_FEATURE_UTMP + /* Update the utmp file. This tty is ours now! */ + update_utmp(options.tty, fakehost); #endif /* Initialize the termios settings (raw mode, eight-bit, blocking i/o). */ @@ -724,8 +725,7 @@ int getty_main(int argc, char **argv) auto_baud(line_buf, sizeof(line_buf), &termios); /* Set the optional timer */ - if (options.timeout) - alarm(options.timeout); + alarm(options.timeout); /* if 0, alarm is not set */ /* Optionally wait for CR or LF before writing /etc/issue */ if (options.flags & F_WAITCRLF) { @@ -733,17 +733,14 @@ int getty_main(int argc, char **argv) debug("waiting for cr-lf\n"); while (safe_read(0, &ch, 1) == 1) { + debug("read %x\n", (unsigned char)ch); ch &= 0x7f; /* strip "parity bit" */ -#ifdef DEBUGGING - fprintf(dbf, "read %c\n", ch); -#endif if (ch == '\n' || ch == '\r') break; } } logname = NULL; - chardata = init_chardata; if (!(options.flags & F_NOPROMPT)) { /* NB:termios_init already set line speed * to options.speeds[0] */ @@ -753,7 +750,7 @@ int getty_main(int argc, char **argv) /* Read the login name. */ debug("reading login name\n"); logname = get_logname(line_buf, sizeof(line_buf), - &options, &chardata, &termios); + &options, &chardata, &termios); if (logname) break; /* we are here only if options.numspeed > 1 */ @@ -765,8 +762,7 @@ int getty_main(int argc, char **argv) } /* Disable timer. */ - if (options.timeout) - alarm(0); + alarm(0); /* Finalize the termios settings. */ termios_final(&options, &termios, &chardata); @@ -777,7 +773,7 @@ int getty_main(int argc, char **argv) /* Let the login program take care of password validation. */ /* We use PATH because we trust that root doesn't set "bad" PATH, * and getty is not suid-root applet. */ - /* Hmm... with -n, logname == NULL! Is it ok? */ + /* With -n, logname == NULL, and login will ask for username instead */ BB_EXECLP(options.login, options.login, "--", logname, NULL); bb_error_msg_and_die("%s: can't exec %s", options.tty, options.login); } diff --git a/util-linux/mount.c b/util-linux/mount.c index e41707e38..796e1e103 100644 --- a/util-linux/mount.c +++ b/util-linux/mount.c @@ -1725,8 +1725,6 @@ static const char must_be_root[] ALIGN1 = "you must be root"; int mount_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; int mount_main(int argc, char **argv) { - enum { OPT_ALL = 0x10 }; - char *cmdopts = xstrdup(""); char *fstype = NULL; char *storage_path = NULL; @@ -1771,7 +1769,7 @@ int mount_main(int argc, char **argv) // If we have no arguments, show currently mounted filesystems if (!argc) { - if (!(opt & OPT_ALL)) { + if (!(opt & OPT_a)) { FILE *mountTable = setmntent(bb_path_mtab_file, "r"); if (!mountTable) bb_error_msg_and_die("no %s", bb_path_mtab_file);