From: Albert Aribaud <[albert.aribaud@free.fr]> Date: Sat, 7 Aug 2010 23:47:06 +0000 (+0530) Subject: ide: add mvsata_ide driver X-Git-Tag: v2010.09-rc1~1^2~14^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=39419ce589bb6b8c25819abe21eaa3c721dfb8b9;p=oweals%2Fu-boot.git ide: add mvsata_ide driver This driver only provides initialization code; actual driving is done by cmd_ide.c using the ATA compatibility mode of the Marvell SATAHC controller. Signed-off-by: Albert Aribaud --- diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 3bab1e41e8..64dcf4e245 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -30,6 +30,7 @@ COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o COBJS-$(CONFIG_LIBATA) += libata.o COBJS-$(CONFIG_CMD_MG_DISK) += mg_disk.o +COBJS-$(CONFIG_MVSATA_IDE) += mvsata_ide.o COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c new file mode 100644 index 0000000000..077b2789bb --- /dev/null +++ b/drivers/block/mvsata_ide.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * Written-by: Albert ARIBAUD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include +#include + +#if defined(CONFIG_ORION5X) +#include +#elif defined(CONFIG_KIRKWOOD) +#include +#endif + +/* SATA port registers */ +struct mvsata_port_registers { + u32 reserved1[192]; + /* offset 0x300 : ATA Interface registers */ + u32 sstatus; + u32 serror; + u32 scontrol; + u32 ltmode; + u32 phymode3; + u32 phymode4; + u32 reserved2[5]; + u32 phymode1; + u32 phymode2; + u32 bist_cr; + u32 bist_dw1; + u32 bist_dw2; + u32 serrorintrmask; +}; + +/* + * Sanity checks: + * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR. + * - for ide_preinit to make sense, we need at least one of + * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE0_OFFSET; + * - for inde_preinit to be called, we need CONFIG_IDE_PREINIT. + * Fail with an explanation message if these conditions are not met. + * This is particularly important for CONFIG_IDE_PREINIT, because + * its lack would not cause a build error. + */ + +#if !defined(CONFIG_SYS_ATA_BASE_ADDR) +#error CONFIG_SYS_ATA_BASE_ADDR must be defined +#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \ + && !defined(CONFIG_SYS_ATA_IDE1_OFFSET) +#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \ + must be defined +#elif !defined(CONFIG_IDE_PREINIT) +#error CONFIG_IDE_PREINIT must be defined +#endif + +/* + * Masks and values for SControl DETection and Interface Power Management, + * and for SStatus DETection. + */ + +#define MVSATA_SCONTROL_DET_MASK 0x0000000F +#define MVSATA_SCONTROL_DET_NONE 0x00000000 +#define MVSATA_SCONTROL_DET_INIT 0x00000001 +#define MVSATA_SCONTROL_IPM_MASK 0x00000F00 +#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300 +#define MVSATA_SCONTROL_MASK \ + (MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK) +#define MVSATA_PORT_INIT \ + (MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) +#define MVSATA_PORT_USE \ + (MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) +#define MVSATA_SSTATUS_DET_MASK 0x0000000F +#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003 + +/* + * Initialize one MVSATAHC port: set SControl's IPM to "always active" + * and DET to "reset", then wait for SStatus's DET to become "device and + * comm ok" (or time out after 50 us if no device), then set SControl's + * DET back to "no action". + */ + +static void mvsata_ide_initialize_port(struct mvsata_port_registers *port) +{ + u32 control; + u32 status; + u32 tout = 50; /* wait at most 50 us for SATA reset to complete */ + + control = readl(&port->scontrol); + control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT; + writel(control, &port->scontrol); + while (--tout) { + status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK; + if (status == MVSATA_SSTATUS_DET_DEVCOMM) + break; + udelay(1); + } + control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE; + writel(control, &port->scontrol); +} + +/* + * ide_preinit() will be called by ide_init in cmd_ide.c and will + * reset the MVSTATHC ports needed by the board. + */ + +int ide_preinit(void) +{ + /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */ +#if defined(CONFIG_SYS_ATA_IDE0_OFFSET) + mvsata_ide_initialize_port( + (struct mvsata_port_registers *) + (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET)); +#endif + /* Enable ATA port 1 (could be SATA port 0 or 1) if declared */ +#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) + mvsata_ide_initialize_port( + (struct mvsata_port_registers *) + (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET)); +#endif + /* return 0 as we always succeed */ + return 0; +}