From: Saksham Jain Date: Wed, 23 Mar 2016 10:54:32 +0000 (+0530) Subject: armv8: ls2080: Add SFP Configs for LS2080 X-Git-Tag: v2016.05-rc1~120^2~17 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=3808190af0d753c152633736e953f7ffa3bbc1b2;p=oweals%2Fu-boot.git armv8: ls2080: Add SFP Configs for LS2080 In LS2080, SFP has version 3.4. It is in little endian. The base address is 0x01e80200. SFP is used in Secure Boot to read fuses. Signed-off-by: Aneesh Bansal Signed-off-by: Saksham Jain Reviewed-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index bfaece2d67..35d59081a5 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -67,6 +67,10 @@ /* SMMU Defintions */ #define SMMU_BASE 0x05000000 /* GR0 Base */ +/* SFP */ +#define CONFIG_SYS_FSL_SFP_VER_3_4 +#define CONFIG_SYS_FSL_SFP_LE + /* Cache Coherent Interconnect */ #define CCI_MN_BASE 0x04000000 #define CCI_MN_RNF_NODEID_LIST 0x180 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 081519aef7..6f1b144649 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -73,6 +73,9 @@ #define AHCI_BASE_ADDR1 (CONFIG_SYS_IMMR + 0x02200000) #define AHCI_BASE_ADDR2 (CONFIG_SYS_IMMR + 0x02210000) +/* SFP */ +#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200) + /* PCIe */ #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) diff --git a/include/fsl_sfp.h b/include/fsl_sfp.h index 353a123ee5..2976a2cbef 100644 --- a/include/fsl_sfp.h +++ b/include/fsl_sfp.h @@ -32,7 +32,8 @@ /* Number of SRKH registers */ #define NUM_SRKH_REGS 8 -#ifdef CONFIG_SYS_FSL_SFP_VER_3_2 +#if defined(CONFIG_SYS_FSL_SFP_VER_3_2) || \ + defined(CONFIG_SYS_FSL_SFP_VER_3_4) struct ccsr_sfp_regs { u32 ospr; /* 0x200 */ u32 ospr1; /* 0x204 */