From: John Crispin Date: Thu, 22 Jan 2015 09:35:22 +0000 (+0000) Subject: ramips: add support for Tenda 3G150B X-Git-Tag: reboot~4605 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=36d19e46dfbf0a6baa4f741e8182fbd72dd6575e;p=oweals%2Fopenwrt.git ramips: add support for Tenda 3G150B Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz SVN-Revision: 44073 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 8695cdeb65..af3dddcc58 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -24,6 +24,7 @@ case $board in 3g-6200nl) set_wifi_led "edimax:green:wlan" ;; + 3g150b |\ 3g300m) set_usb_led "tenda:blue:3g" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index a8ed0b4e09..7724c3e40a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -43,6 +43,7 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "1" "0 6t" ;; + 3g150b | \ 3g300m | \ w150m | \ all0256n | \ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 1693e9d4fe..808177bc0d 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -9,7 +9,7 @@ get_status_led() { 3g-6200n) status_led="edimax:green:power" ;; - 3g300m | w150m) + 3g150b | 3g300m | w150m) status_led="tenda:blue:ap" ;; ai-br100) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index bb815dabdb..f43725ef9d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -316,6 +316,9 @@ ramips_board_detect() { *"Tenda 3G300M") name="3g300m" ;; + *"Tenda 3G150B") + name="3g150b" + ;; *"Tenda W306R V2.0") name="w306r-v20" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index ff7126a96f..0dfdf9de86 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -16,6 +16,7 @@ platform_check_image() { case "$board" in 3g-6200n | \ 3g-6200nl | \ + 3g150b | \ 3g300m | \ a5-v11 | \ air3gii | \ diff --git a/target/linux/ramips/dts/3G150B.dts b/target/linux/ramips/dts/3G150B.dts new file mode 100644 index 0000000000..bdcca7102f --- /dev/null +++ b/target/linux/ramips/dts/3G150B.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "3G150B", "ralink,rt5350-soc"; + model = "Tenda 3G150B"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl064k"; + reg = <0 0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + gpio1: gpio@660 { + status = "okay"; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + ralink,led-polarity = <1>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + ap { + label = "tenda:blue:ap"; + gpios = <&gpio0 7 1>; + }; + 3g { + label = "tenda:blue:3g"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 13 0>; + }; + }; + +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e4dea9b7b5..d35c4206b8 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -549,6 +549,8 @@ Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN) # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI +Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image) + Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) @@ -676,6 +678,7 @@ ifeq ($(SUBTARGET),rt305x) define Image/Build/Profile/Default $(call Image/Build/Profile/3G6200N,$(1)) $(call Image/Build/Profile/3G6200NL,$(1)) + $(call Image/Build/Profile/3G150B,$(1)) $(call Image/Build/Profile/3G300M,$(1)) $(call Image/Build/Profile/A5-11,$(1)) $(call Image/Build/Profile/AIR3GII,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/tenda.mk b/target/linux/ramips/rt305x/profiles/tenda.mk index d9d94cfbb9..36ba822b44 100644 --- a/target/linux/ramips/rt305x/profiles/tenda.mk +++ b/target/linux/ramips/rt305x/profiles/tenda.mk @@ -5,6 +5,19 @@ # See /LICENSE for more information. # +define Profile/3G150B + NAME:=Tenda 3G150B + PACKAGES:=\ + kmod-usb-core kmod-usb-dwc2 \ + kmod-ledtrig-usbdev +endef + +define Profile/3G150B/Description + Package set for Tenda 3G150B board +endef + +$(eval $(call Profile,3G150B)) + define Profile/3G300M NAME:=Tenda 3G300M PACKAGES:=\