From: Petr Štetiar Date: Mon, 19 Nov 2018 23:16:27 +0000 (+0100) Subject: ath79: gmac: ar934x: Add parser for mii-gmac0-slave X-Git-Tag: v19.07.0-rc1~1126 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=368b6d1a52e57e9cce3b92fcef6928bee995617b;p=oweals%2Fopenwrt.git ath79: gmac: ar934x: Add parser for mii-gmac0-slave While converting Nanostation M XW from current ar71xx code to ath79 I've hit one issue, where the ethernet networking wasn't working, so I was checking every bit in the networking setup path between ar71xx and ath79. I've came to the following code in ar71xx/mach-ubnt-xm.c: static void __init ubnt_xw_init(void) { ... ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); ... } Where this code is setting AR934X_ETH_CFG_MII_GMAC0_SLAVE bit in AR934X_GMAC_REG_ETH_CFG register, but I couldn't find a way of setting this bit from DTS, so this patch adds `mii-gmac0-slave` DTS property which allows setting of this bit in `gmac-config`, which is then used in Nanostation M XW DTS. Tested-by: Joe Ayers Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c index e69abb6438..cc0a15d3a4 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c @@ -53,6 +53,7 @@ static void ag71xx_setup_gmac_934x(struct device_node *np, void __iomem *base) ag71xx_of_bit(np, "rgmii-gmac0", &val, AR934X_ETH_CFG_RGMII_GMAC0); ag71xx_of_bit(np, "mii-gmac0", &val, AR934X_ETH_CFG_MII_GMAC0); + ag71xx_of_bit(np, "mii-gmac0-slave", &val, AR934X_ETH_CFG_MII_GMAC0_SLAVE); ag71xx_of_bit(np, "gmii-gmac0", &val, AR934X_ETH_CFG_GMII_GMAC0); ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP); ag71xx_of_bit(np, "switch-only-mode", &val,