From: Andre Przywara Date: Sun, 23 Jun 2019 14:09:49 +0000 (+0100) Subject: sunxi: phy: Add USB PHY support for Allwinner H6 X-Git-Tag: v2019.10-rc1~27^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=35fa673e0e5f;p=oweals%2Fu-boot.git sunxi: phy: Add USB PHY support for Allwinner H6 The USB PHY used in the Allwinner H6 SoC has some pecularities (as usual), which require a small addition to the USB PHY driver: In this case the second PHY is PHY3, not PHY1, so we need to skip number 1 and 2 in the code. Just use the respective code from Linux for that. Signed-off-by: Andre Przywara Tested-by: Corentin Labbe # Pine-H64 Reviewed-by: Jagan Teki --- diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index f206fa3f5d..5e8f87717f 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -75,6 +75,7 @@ enum sun4i_usb_phy_type { sun8i_h3_phy, sun8i_v3s_phy, sun50i_a64_phy, + sun50i_h6_phy, }; struct sun4i_usb_phy_cfg { @@ -85,6 +86,7 @@ struct sun4i_usb_phy_cfg { bool dedicated_clocks; bool enable_pmu_unk1; bool phy0_dual_route; + int missing_phys; }; struct sun4i_usb_phy_info { @@ -349,6 +351,9 @@ static int sun4i_usb_phy_xlate(struct phy *phy, if (args->args_count >= data->cfg->num_phys) return -EINVAL; + if (data->cfg->missing_phys & BIT(args->args[0])) + return -ENODEV; + if (args->args_count) phy->id = args->args[0]; else @@ -429,6 +434,9 @@ static int sun4i_usb_phy_probe(struct udevice *dev) struct sun4i_usb_phy_info *info = &phy_info[i]; char name[16]; + if (data->cfg->missing_phys & BIT(i)) + continue; + phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus); if (phy->gpio_vbus >= 0) { ret = gpio_request(phy->gpio_vbus, "usb_vbus"); @@ -583,6 +591,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .phy0_dual_route = true, }; +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, + .phy0_dual_route = true, + .missing_phys = BIT(1) | BIT(2), +}; + static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg }, @@ -594,6 +613,7 @@ static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun8i-h3-usb-phy", .data = (ulong)&sun8i_h3_cfg }, { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = (ulong)&sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg}, + { .compatible = "allwinner,sun50i-h6-usb-phy", .data = (ulong)&sun50i_h6_cfg}, { } };