From: Masahiro Yamada Date: Tue, 24 Feb 2015 02:45:06 +0000 (+0900) Subject: ARM: remove dkb board support X-Git-Tag: v2015.04-rc3~23 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=346cfba4f013c34e1dc16948d1ed89dc8c44c478;p=oweals%2Fu-boot.git ARM: remove dkb board support This is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Lei Wen Acked-by: Marek Vasut --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 089bef22e8..0bed390f0d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -223,10 +223,6 @@ config ORION5X bool "Marvell Orion" select CPU_ARM926EJS -config TARGET_DKB - bool "Support dkb" - select CPU_ARM926EJS - config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS @@ -757,7 +753,6 @@ source "board/BuR/tseries/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/db-mv784mp-gp/Kconfig" -source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/altera/socfpga/Kconfig" source "board/armadeus/apf27/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index ac23116955..63fa159db6 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -19,5 +19,4 @@ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ -obj-$(CONFIG_PANTHEON) += pantheon/ obj-$(if $(filter spear,$(SOC)),y) += spear/ diff --git a/arch/arm/cpu/arm926ejs/pantheon/Makefile b/arch/arm/cpu/arm926ejs/pantheon/Makefile deleted file mode 100644 index 988341f8fb..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Marvell Semiconductor -# Written-by: Lei Wen -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o timer.o dram.o diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c deleted file mode 100644 index 4e2a177c0d..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1)) -#define SET_MRVL_ID (1<<8) -#define L2C_RAM_SEL (1<<4) - -int arch_cpu_init(void) -{ - u32 val; - struct panthcpu_registers *cpuregs = - (struct panthcpu_registers*) PANTHEON_CPU_BASE; - - struct panthapb_registers *apbclkres = - (struct panthapb_registers*) PANTHEON_APBC_BASE; - - struct panthmpmu_registers *mpmu = - (struct panthmpmu_registers*) PANTHEON_MPMU_BASE; - - struct panthapmu_registers *apmu = - (struct panthapmu_registers *) PANTHEON_APMU_BASE; - - /* set SEL_MRVL_ID bit in PANTHEON_CPU_CONF register */ - val = readl(&cpuregs->cpu_conf); - val = val | SET_MRVL_ID; - writel(val, &cpuregs->cpu_conf); - - /* Turn on clock gating (PMUM_CCGR) */ - writel(0xFFFFFFFF, &mpmu->ccgr); - - /* Turn on clock gating (PMUM_ACGR) */ - writel(0xFFFFFFFF, &mpmu->acgr); - - /* Turn on uart2 clock */ - writel(UARTCLK14745KHZ, &apbclkres->uart0); - - /* Enable GPIO clock */ - writel(APBC_APBCLK, &apbclkres->gpio); - -#ifdef CONFIG_I2C_MV - /* Enable I2C clock */ - writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); - writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); -#endif - -#ifdef CONFIG_MV_SDHCI - /* Enable mmc clock */ - writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST, - &apmu->sd1); - writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST, - &apmu->sd3); -#endif - - icache_enable(); - - return 0; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - u32 id; - struct panthcpu_registers *cpuregs = - (struct panthcpu_registers*) PANTHEON_CPU_BASE; - - id = readl(&cpuregs->chip_id); - printf("SoC: PANTHEON 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10)); - return 0; -} -#endif - -#ifdef CONFIG_I2C_MV -void i2c_clk_enable(void) -{ -} -#endif diff --git a/arch/arm/cpu/arm926ejs/pantheon/dram.c b/arch/arm/cpu/arm926ejs/pantheon/dram.c deleted file mode 100644 index f77e3d0ab5..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/dram.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen , - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Pantheon DRAM controller supports upto 8 banks - * for chip select 0 and 1 - */ - -/* - * DDR Memory Control Registers - * Refer Datasheet 4.4 - */ -struct panthddr_map_registers { - u32 cs; /* Memory Address Map Register -CS */ - u32 pad[3]; -}; - -struct panthddr_registers { - u8 pad[0x100 - 0x000]; - struct panthddr_map_registers mmap[2]; -}; - -/* - * panth_sdram_base - reads SDRAM Base Address Register - */ -u32 panth_sdram_base(int chip_sel) -{ - struct panthddr_registers *ddr_regs = - (struct panthddr_registers *)PANTHEON_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000; - return result; -} - -/* - * panth_sdram_size - reads SDRAM size - */ -u32 panth_sdram_size(int chip_sel) -{ - struct panthddr_registers *ddr_regs = - (struct panthddr_registers *)PANTHEON_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs); - result = (result >> 16) & 0xF; - if (result < 0x7) { - printf("Unknown DRAM Size\n"); - return -1; - } else { - return ((0x8 << (result - 0x7)) * 1024 * 1024); - } -} - -#ifndef CONFIG_SYS_BOARD_DRAM_INIT -int dram_init(void) -{ - int i; - - gd->ram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = panth_sdram_base(i); - gd->bd->bi_dram[i].size = panth_sdram_size(i); - /* - * It is assumed that all memory banks are consecutive - * and without gaps. - * If the gap is found, ram_size will be reported for - * consecutive memory only - */ - if (gd->bd->bi_dram[i].start != gd->ram_size) - break; - - gd->ram_size += gd->bd->bi_dram[i].size; - - } - - for (; i < CONFIG_NR_DRAM_BANKS; i++) { - /* - * If above loop terminated prematurely, we need to set - * remaining banks' start address & size as 0. Otherwise other - * u-boot functions and Linux kernel gets wrong values which - * could result in crash - */ - gd->bd->bi_dram[i].start = 0; - gd->bd->bi_dram[i].size = 0; - } - return 0; -} - -/* - * If this function is not defined here, - * board.c alters dram bank zero configuration defined above. - */ -void dram_init_banksize(void) -{ - dram_init(); -} -#endif /* CONFIG_SYS_BOARD_DRAM_INIT */ diff --git a/arch/arm/cpu/arm926ejs/pantheon/timer.c b/arch/arm/cpu/arm926ejs/pantheon/timer.c deleted file mode 100644 index 6382d3b0cf..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/timer.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * Timer registers - * Refer 6.2.9 in Datasheet - */ -struct panthtmr_registers { - u32 clk_ctrl; /* Timer clk control reg */ - u32 match[9]; /* Timer match registers */ - u32 count[3]; /* Timer count registers */ - u32 status[3]; - u32 ie[3]; - u32 preload[3]; /* Timer preload value */ - u32 preload_ctrl[3]; - u32 wdt_match_en; - u32 wdt_match_r; - u32 wdt_val; - u32 wdt_sts; - u32 icr[3]; - u32 wdt_icr; - u32 cer; /* Timer count enable reg */ - u32 cmr; - u32 ilr[3]; - u32 wcr; - u32 wfar; - u32 wsar; - u32 cvwr[3]; -}; - -#define TIMER 0 /* Use TIMER 0 */ -/* Each timer has 3 match registers */ -#define MATCH_CMP(x) ((3 * TIMER) + x) -#define TIMER_LOAD_VAL 0xffffffff -#define COUNT_RD_REQ 0x1 - -DECLARE_GLOBAL_DATA_PTR; -/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */ - -/* - * For preventing risk of instability in reading counter value, - * first set read request to register cvwr and then read same - * register after it captures counter value. - */ -ulong read_timer(void) -{ - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_TIMER_BASE; - volatile int loop=100; - ulong val; - - writel(COUNT_RD_REQ, &panthtimers->cvwr); - while (loop--) - val = readl(&panthtimers->cvwr); - - /* - * This stop gcc complain and prevent loop mistake init to 0 - */ - val = readl(&panthtimers->cvwr); - - return val; -} - -ulong get_timer_masked(void) -{ - ulong now = read_timer(); - - if (now >= gd->arch.tbl) { - /* normal mode */ - gd->arch.tbu += now - gd->arch.tbl; - } else { - /* we have an overflow ... */ - gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl; - } - gd->arch.tbl = now; - - return gd->arch.tbu; -} - -ulong get_timer(ulong base) -{ - return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) - - base); -} - -void __udelay(unsigned long usec) -{ - ulong delayticks; - ulong endtime; - - delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000)); - endtime = get_timer_masked() + delayticks; - - while (get_timer_masked() < endtime) - ; -} - -/* - * init the Timer - */ -int timer_init(void) -{ - struct panthapb_registers *apb1clkres = - (struct panthapb_registers *) PANTHEON_APBC_BASE; - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_TIMER_BASE; - - /* Enable Timer clock at 3.25 MHZ */ - writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers); - - /* load value into timer */ - writel(0x0, &panthtimers->clk_ctrl); - /* Use Timer 0 Match Resiger 0 */ - writel(TIMER_LOAD_VAL, &panthtimers->match[MATCH_CMP(0)]); - /* Preload value is 0 */ - writel(0x0, &panthtimers->preload[TIMER]); - /* Enable match comparator 0 for Timer 0 */ - writel(0x1, &panthtimers->preload_ctrl[TIMER]); - - /* Enable timer 0 */ - writel(0x1, &panthtimers->cer); - /* init the gd->arch.tbu and gd->arch.tbl value */ - gd->arch.tbl = read_timer(); - gd->arch.tbu = 0; - - return 0; -} - -#define MPMU_APRR_WDTR (1<<4) -#define TMR_WFAR 0xbaba /* WDT Register First key */ -#define TMP_WSAR 0xeb10 /* WDT Register Second key */ - -/* - * This function uses internal Watchdog Timer - * based reset mechanism. - * Steps to write watchdog registers (protected access) - * 1. Write key value to TMR_WFAR reg. - * 2. Write key value to TMP_WSAR reg. - * 3. Perform write operation. - */ -void reset_cpu (unsigned long ignored) -{ - struct panthmpmu_registers *mpmu = - (struct panthmpmu_registers *) PANTHEON_MPMU_BASE; - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_WD_TIMER_BASE; - u32 val; - - /* negate hardware reset to the WDT after system reset */ - val = readl(&mpmu->aprr); - val = val | MPMU_APRR_WDTR; - writel(val, &mpmu->aprr); - - /* reset/enable WDT clock */ - writel(APBC_APBCLK, &mpmu->wdtpcr); - - /* clear previous WDT status */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0, &panthtimers->wdt_sts); - - /* set match counter */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0xf, &panthtimers->wdt_match_r); - - /* enable WDT reset */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0x3, &panthtimers->wdt_match_en); - - /*enable functional WDT clock */ - writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - return (ulong)CONFIG_SYS_HZ; -} diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h deleted file mode 100644 index 1eed7b1d56..0000000000 --- a/arch/arm/include/asm/arch-pantheon/config.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_CONFIG_H -#define _PANTHEON_CONFIG_H - -#include - -/* default Dcache Line length for pantheon */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ -#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ -#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ -#define MV_MFPR_BASE PANTHEON_MFPR_BASE -#define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE -#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register - represents UART Unit Enable */ -/* - * I2C definition - */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0xd4011000 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 0 -#define CONFIG_SYS_I2C_SLAVE 0xfe -#endif - -/* - * MMC definition - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_CMD_FAT 1 -#define CONFIG_MMC 1 -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_SDHCI 1 -#define CONFIG_MMC_SDHCI_IO_ACCESSORS 1 -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000 -#define CONFIG_MMC_SDMA 1 -#define CONFIG_MV_SDHCI 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_EFI_PARTITION 1 -#define CONFIG_SYS_MMC_NUM 2 -#define CONFIG_SYS_MMC_BASE {0xD4280000, 0xd4281000} -#endif - -#endif /* _PANTHEON_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h deleted file mode 100644 index 3ccdf8a359..0000000000 --- a/arch/arm/include/asm/arch-pantheon/cpu.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_CPU_H -#define _PANTHEON_CPU_H - -#include -#include - -/* - * Main Power Management (MPMU) Registers - * Refer Register Datasheet 9.1 - */ -struct panthmpmu_registers { - u8 pad0[0x0024]; - u32 ccgr; /*0x0024*/ - u8 pad1[0x0200 - 0x024 - 4]; - u32 wdtpcr; /*0x0200*/ - u8 pad2[0x1020 - 0x200 - 4]; - u32 aprr; /*0x1020*/ - u32 acgr; /*0x1024*/ -}; - -/* - * Application Power Management (APMU) Registers - * Refer Register Datasheet 9.2 - */ -struct panthapmu_registers { - u8 pad0[0x0054]; - u32 sd1; /*0x0054*/ - u8 pad1[0x00e0 - 0x054 - 4]; - u32 sd3; /*0x00e0*/ -}; - -/* - * APB Clock Reset/Control Registers - * Refer Register Datasheet 6.14 - */ -struct panthapb_registers { - u32 uart0; /*0x000*/ - u32 uart1; /*0x004*/ - u32 gpio; /*0x008*/ - u8 pad0[0x02c - 0x08 - 4]; - u32 twsi; /*0x02c*/ - u8 pad1[0x034 - 0x2c - 4]; - u32 timers; /*0x034*/ -}; - -/* - * CPU Interface Registers - * Refer Register Datasheet 4.3 - */ -struct panthcpu_registers { - u32 chip_id; /* Chip Id Reg */ - u32 pad; - u32 cpu_conf; /* CPU Conf Reg */ - u32 pad1; - u32 cpu_sram_spd; /* CPU SRAM Speed Reg */ - u32 pad2; - u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */ - u32 mcb_conf; /* MCB Conf Reg */ - u32 sys_boot_ctl; /* Sytem Boot Control */ -}; - -/* - * Functions - */ -u32 panth_sdram_base(int); -u32 panth_sdram_size(int); -int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); - -#endif /* _PANTHEON_CPU_H */ diff --git a/arch/arm/include/asm/arch-pantheon/gpio.h b/arch/arm/include/asm/arch-pantheon/gpio.h deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h deleted file mode 100644 index 7909d53d46..0000000000 --- a/arch/arm/include/asm/arch-pantheon/mfp.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Based on arch/arm/include/asm/arch-armada100/mfp.h - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PANTHEON_MFP_H -#define __PANTHEON_MFP_H - -/* - * Frequently used MFP Configuration macros for all PANTHEON family of SoCs - * - * offset, pull,pF, drv,dF, edge,eF ,afn,aF - */ -/* UART2 */ -#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* More macros can be defined here... */ -#define MFP_MMC1_DAT7 (MFP_REG(0x84) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT6 (MFP_REG(0x88) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT5 (MFP_REG(0x8c) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT4 (MFP_REG(0x90) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT3 (MFP_REG(0x94) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT2 (MFP_REG(0x98) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT1 (MFP_REG(0x9c) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT0 (MFP_REG(0xa0) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CMD (MFP_REG(0xa4) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CLK (MFP_REG(0xa8) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CD (MFP_REG(0xac) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_WP (MFP_REG(0xb0) | MFP_AF0 | MFP_DRIVE_MEDIUM) - -#define MFP_PIN_MAX 117 -#endif diff --git a/arch/arm/include/asm/arch-pantheon/pantheon.h b/arch/arm/include/asm/arch-pantheon/pantheon.h deleted file mode 100644 index c3a71bfce4..0000000000 --- a/arch/arm/include/asm/arch-pantheon/pantheon.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_H -#define _PANTHEON_H - -/* Common APB clock register bit definitions */ -#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ -#define APBC_FNCLK (1<<1) /* Functional Clock Enable */ -#define APBC_RST (1<<2) /* Reset Generation */ -/* Functional Clock Selection Mask */ -#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) - -/* Common APMU register bit definitions */ -#define APMU_PERI_CLK (1<<4) /* Peripheral Clock Enable */ -#define APMU_AXI_CLK (1<<3) /* AXI Clock Enable*/ -#define APMU_PERI_RST (1<<1) /* Peripheral Reset */ -#define APMU_AXI_RST (1<<0) /* AXI Reset */ - -/* Register Base Addresses */ -#define PANTHEON_DRAM_BASE 0xB0000000 -#define PANTHEON_TIMER_BASE 0xD4014000 -#define PANTHEON_WD_TIMER_BASE 0xD4080000 -#define PANTHEON_APBC_BASE 0xD4015000 -#define PANTHEON_UART1_BASE 0xD4017000 -#define PANTHEON_UART2_BASE 0xD4018000 -#define PANTHEON_GPIO_BASE 0xD4019000 -#define PANTHEON_MFPR_BASE 0xD401E000 -#define PANTHEON_MPMU_BASE 0xD4050000 -#define PANTHEON_APMU_BASE 0xD4282800 -#define PANTHEON_CPU_BASE 0xD4282C00 - -#endif /* _PANTHEON_H */ diff --git a/board/Marvell/dkb/Kconfig b/board/Marvell/dkb/Kconfig deleted file mode 100644 index f6748941c6..0000000000 --- a/board/Marvell/dkb/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_DKB - -config SYS_BOARD - default "dkb" - -config SYS_VENDOR - default "Marvell" - -config SYS_SOC - default "pantheon" - -config SYS_CONFIG_NAME - default "dkb" - -endif diff --git a/board/Marvell/dkb/MAINTAINERS b/board/Marvell/dkb/MAINTAINERS deleted file mode 100644 index c272b7ae74..0000000000 --- a/board/Marvell/dkb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DKB BOARD -M: Lei Wen -S: Maintained -F: board/Marvell/dkb/ -F: include/configs/dkb.h -F: configs/dkb_defconfig diff --git a/board/Marvell/dkb/Makefile b/board/Marvell/dkb/Makefile deleted file mode 100644 index 9d88579120..0000000000 --- a/board/Marvell/dkb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Marvell Semiconductor -# Written-by: Lei Wen -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dkb.o diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c deleted file mode 100644 index c0c31259a3..0000000000 --- a/board/Marvell/dkb/dkb.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#ifdef CONFIG_GENERIC_MMC -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - u32 mfp_cfg[] = { - /* Enable Console on UART2 */ - MFP47_UART2_RXD, - MFP48_UART2_TXD, - - /* I2C */ - MFP53_CI2C_SCL, - MFP54_CI2C_SDA, - - /* MMC1 */ - MFP_MMC1_DAT7, - MFP_MMC1_DAT6, - MFP_MMC1_DAT5, - MFP_MMC1_DAT4, - MFP_MMC1_DAT3, - MFP_MMC1_DAT2, - MFP_MMC1_DAT1, - MFP_MMC1_DAT0, - MFP_MMC1_CMD, - MFP_MMC1_CLK, - MFP_MMC1_CD, - MFP_MMC1_WP, - - MFP_EOC /*End of configureation*/ - }; - /* configure MFP's */ - mfp_config(mfp_cfg); - - return 0; -} - -int board_init(void) -{ - /* arch number of Board */ - gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB; - /* adress of boot parameters */ - gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100; - return 0; -} - -#ifdef CONFIG_GENERIC_MMC -#define I2C_SLAVE_ADDR 0x34 -#define LDO13_REG 0x28 -#define LDO_V30 0x6 -#define LDO_VOLTAGE(x) ((x & 0x7) << 1) -#define LDO_EN 0x1 -int board_mmc_init(bd_t *bd) -{ - ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE; - u8 i, data; - - /* set LDO 13 to 3.0v */ - data = LDO_VOLTAGE(LDO_V30) | LDO_EN; - i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1); - - for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) { - if (mv_sdh_init(mmc_base_address[i], 0, 0, - SDHCI_QUIRK_32BIT_DMA_ADDR)) - return 1; - } - - return 0; -} -#endif diff --git a/configs/dkb_defconfig b/configs/dkb_defconfig deleted file mode 100644 index 0be9578f4f..0000000000 --- a/configs/dkb_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_DKB=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 0fc6ac7fda..d206251d7f 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +dkb arm arm926ejs - - Lei Wen jadecpu arm arm926ejs - - Matthias Weisser icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23 diff --git a/include/configs/dkb.h b/include/configs/dkb.h deleted file mode 100644 index 7ffbb14e30..0000000000 --- a/include/configs/dkb.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor - * Written-by: Lei Wen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_DKB_H -#define __CONFIG_DKB_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-TTC DKB" - -/* - * High Level Configuration Options - */ -#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ -#define CONFIG_PANTHEON 1 /* SOC Family Name */ -#define CONFIG_MACH_TTC_DKB 1 /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#undef CONFIG_ARCH_MISC_INIT - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#define CONFIG_ENV_SIZE 0x20000 /* 64k */ - -#endif /* __CONFIG_DKB_H */