From: Luis Araneda <luaraneda@gmail.com>
Date: Fri, 5 Jan 2018 13:00:11 +0000 (-0300)
Subject: ipq806x: convert to dt-based board-detection
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=33f09cf15178cf7e05cbe816e1cb492bcae89836;p=librecmc%2Flibrecmc.git

ipq806x: convert to dt-based board-detection

Use the generic board detection method:
- Board name: First compatible string from the device tree
- Board model: Model property from the device tree

Change occurrences of board name in userspace by the compatible
string, and removed target specific board detection script

Replace the definition of SUPPORTED_DEVICES in Device/Default
to extract the dt compatible string from each device definition.
Additionally, for devices supported by lede-17.01, append
the value of BOARD_NAME to SUPPORTED_DEVICES in the device
definition.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
---

diff --git a/package/boot/uboot-envtools/files/ipq b/package/boot/uboot-envtools/files/ipq
index b7162807f8..c3ec01efd0 100644
--- a/package/boot/uboot-envtools/files/ipq
+++ b/package/boot/uboot-envtools/files/ipq
@@ -31,13 +31,14 @@ ubootenv_mtdinfo () {
 }
 
 case "$board" in
-ap148 | db149)
+qcom,ipq8064-ap148 |\
+qcom,ipq8064-db149)
 	ubootenv_add_uci_config $(ubootenv_mtdinfo)
 	;;
-ea8500)
+linksys,ea8500)
 	ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
 	;;
-nbg6817)
+zyxel,nbg6817)
 	ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000"
 	;;
 esac
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index f9ec88bb34..f0b087f6f6 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,37 +11,37 @@ board=$(board_name)
 boardname="${board##*,}"
 
 case "$board" in
-c2600)
-	ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb_2" "usb1-port1" "usb2-port1"
-	ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
-	ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
+tplink,c2600)
+	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
+	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
 	;;
-d7800 |\
-r7500 |\
-r7500v2 |\
-r7800)
-	ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1"
-	ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1"
-	ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
-	ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata"
+netgear,d7800 |\
+netgear,r7500 |\
+netgear,r7500v2 |\
+netgear,r7800)
+	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb1" "usb1-port1" "usb2-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb2" "usb3-port1" "usb4-port1"
+	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0"
+	ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
 	;;
-fritz4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "${board}:green:lan" "switch0" "0x1e"
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
 	;;
-nbg6817)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:amber:wifi2g" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5g" "phy0tpt"
-	ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
+zyxel,nbg6817)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
+	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
 	;;
-vr2600v)
-	ucidef_set_led_usbport "usb" "USB" "${board}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1tpt"
-	ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
+tplink,vr2600v)
+	ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
+	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:white:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
+	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
 	;;
 *)
 	;;
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index ad357b7363..8854b9c67d 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,25 +12,25 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-ap148 |\
-d7800 |\
-r7500 |\
-r7500v2 |\
-r7800 |\
-vr2600v)
+netgear,d7800 |\
+netgear,r7500 |\
+netgear,r7500v2 |\
+netgear,r7800 |\
+qcom,ipq8064-ap148 |\
+tplink,vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
 	;;
-c2600)
+tplink,c2600)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
 	;;
-db149)
+qcom,ipq8064-db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
 	;;
-ea8500)
+linksys,ea8500)
 
 	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 	ucidef_add_switch "switch0" \
@@ -38,12 +38,12 @@ ea8500)
 	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
 	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
 	;;
-fritz4040)
+avm,fritzbox-4040)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" \
 		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
 	;;
-nbg6817)
+zyxel,nbg6817)
 	hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4c5b55bc53..dc74df87cc 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,20 +47,20 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
-	ap-dk01.1-c1)
+	qcom,ap-dk01.1-c1)
 		ath10kcal_extract "ART" 4096 12064
 		;;
-	fritz4040)
+	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	esac
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
-	ap-dk01.1-c1)
+	qcom,ap-dk01.1-c1)
 		ath10kcal_extract "ART" 20480 12064
 		;;
-	fritz4040)
+	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	esac
@@ -68,46 +68,46 @@ case "$FIRMWARE" in
 
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
 	case $board in
-	c2600)
+	tplink,c2600)
 		ath10kcal_extract "radio" 4096 12064
 # 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
 		;;
-	d7800 |\
-	r7500v2 |\
-	r7800)
+	netgear,d7800 |\
+	netgear,r7500v2 |\
+	netgear,r7800)
 		ath10kcal_extract "art" 4096 12064
 		;;
-	ea8500)
+	linksys,ea8500)
 		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		ath10kcal_extract "art" 4096 12064
 		;;
-	nbg6817)
+	zyxel,nbg6817)
 		ath10kcal_extract "0:ART" 4096 12064
 		;;
-	vr2600v)
+	tplink,vr2600v)
 		ath10kcal_extract "ART" 4096 12064
 		;;
 	esac
 	;;
 "ath10k/pre-cal-pci-0001:01:00.0.bin")
 	case $board in
-	c2600)
+	tplink,c2600)
 		ath10kcal_extract "radio" 20480 12064
 # 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
 		;;
-	d7800 |\
-	r7500v2 |\
-	r7800)
+	netgear,d7800 |\
+	netgear,r7500v2 |\
+	netgear,r7800)
 		ath10kcal_extract "art" 20480 12064
 		;;
-	ea8500)
+	linksys,ea8500)
 		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		ath10kcal_extract "art" 20480 12064
 		;;
-	nbg6817)
+	zyxel,nbg6817)
 		ath10kcal_extract "0:ART" 20480 12064
 		;;
-	vr2600v)
+	tplink,vr2600v)
 		ath10kcal_extract "ART" 20480 12064
 		;;
 	esac
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 7884f5117a..207711063c 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -12,21 +12,21 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
-	c2600)
+	tplink,c2600)
 		echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
 		;;
-	d7800 |\
-	r7500v2 |\
-	r7800)
+	netgear,d7800 |\
+	netgear,r7500v2 |\
+	netgear,r7800)
 		echo $(macaddr_add $(mtd_get_mac_binary art 6)  $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
 		;;
-	ea8500)
+	linksys,ea8500)
 		echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
 		;;
-	nbg6817)
+	zyxel,nbg6817)
 		echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
 		;;
-	vr2600v)
+	tplink,vr2600v)
 		echo $(macaddr_add $(mtd_get_mac_binary default-mac 0)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
 		;;
 	*)
diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
index 4d94f1f767..6b4b38ec7b 100755
--- a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
@@ -6,7 +6,7 @@ boot() {
 . /lib/functions.sh
 
 case $(board_name) in
-	ea8500)
+	linksys,ea8500)
 		# make sure auto_recovery in uboot is always on
 		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
 		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh
deleted file mode 100644
index c4d2c8f258..0000000000
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2014 The Linux Foundation. All rights reserved.
-# Copyright (C) 2011 OpenWrt.org
-#
-
-IPQ806X_BOARD_NAME=
-IPQ806X_MODEL=
-
-ipq806x_board_detect() {
-	local machine
-	local name
-
-	machine=$(cat /proc/device-tree/model)
-
-	case "$machine" in
-	*"AP-DK01.1-C1")
-		name="ap-dk01.1-c1"
-		;;
-	*"AP148")
-		name="ap148"
-		;;
-	*"4040")
-		name="fritz4040"
-		;;
-	*"C2600")
-		name="c2600"
-		;;
-	*"D7800")
-		name="d7800"
-		;;
-	*"DB149")
-		name="db149"
-		;;
-	*"NBG6817")
-		name="nbg6817"
-		;;
-	*"R7500")
-		name="r7500"
-		;;
-	*"R7500v2")
-		name="r7500v2"
-		;;
-	*"Linksys EA8500"*)
-		name="ea8500"
-		;;
-	*"R7800")
-		name="r7800"
-		;;
-	*"VR2600v")
-		name="vr2600v"
-		;;
-	esac
-
-	[ -z "$name" ] && name="unknown"
-
-	[ -z "$IPQ806X_BOARD_NAME" ] && IPQ806X_BOARD_NAME="$name"
-	[ -z "$IPQ806X_MODEL" ] && IPQ806X_MODEL="$machine"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
-	echo "$IPQ806X_BOARD_NAME" > /tmp/sysinfo/board_name
-	echo "$IPQ806X_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh b/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh
deleted file mode 100644
index 785f1ebb8b..0000000000
--- a/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2014 The Linux Foundation. All rights reserved.
-#
-
-do_ipq806x() {
-	. /lib/ipq806x.sh
-
-	ipq806x_board_detect
-}
-
-boot_hook_add preinit_main do_ipq806x
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 7d8b178339..dc88c9ed09 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -10,24 +10,24 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
-	ap148 |\
-	ap-dk04.1-c1 |\
-	d7800 |\
-	nbg6817 |\
-	r7500 |\
-	r7500v2 |\
-	r7800)
+	netgear,d7800 |\
+	netgear,r7500 |\
+	netgear,r7500v2 |\
+	netgear,r7800 |\
+	qcom,ap-dk04.1-c1 |\
+	qcom,ipq8064-ap148 |\
+	zyxel,nbg6817)
 		nand_do_upgrade "$ARGV"
 		;;
-	c2600)
+	tplink,c2600)
 		PART_NAME="os-image:rootfs"
 		MTD_CONFIG_ARGS="-s 0x200000"
 		default_do_upgrade "$ARGV"
 		;;
-	ea8500)
+	linksys,ea8500)
 		platform_do_upgrade_linksys "$ARGV"
 		;;
-	vr2600v)
+	tplink,vr2600v)
 		PART_NAME="kernel:rootfs"
 		MTD_CONFIG_ARGS="-s 0x200000"
 		default_do_upgrade "$ARGV"
@@ -40,7 +40,7 @@ platform_do_upgrade() {
 
 platform_nand_pre_upgrade() {
 	case "$(board_name)" in
-	nbg6817)
+	zyxel,nbg6817)
 		zyxel_do_upgrade "$1"
 		;;
 	esac
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
index 7d0ab97356..466d8c616c 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
@@ -74,7 +74,7 @@ zyxel_do_upgrade() {
 
 	[ -b "${rootfs}" ] || return 1
 	case "$board" in
-	nbg6817)
+	zyxel,nbg6817)
 		case "$rootfs" in
 			"/dev/mmcblk0p5")
 				kernel=mmcblk0p4
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index afd79439d8..f28f4a3b7a 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -29,7 +29,7 @@ define Device/Default
 	KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
 	KERNEL_PREFIX := $$(IMAGE_PREFIX)
 	KERNEL_LOADADDR = 0x42208000
-	SUPPORTED_DEVICES = $$(BOARD_NAME)
+	SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
 	IMAGE/sysupgrade.tar = sysupgrade-tar | append-metadata
 endef
 
@@ -106,6 +106,7 @@ define Device/qcom_ipq8064-ap148
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := ap148
+	SUPPORTED_DEVICES += ap148
 	DEVICE_TITLE := Qualcomm AP148
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0
 endef
@@ -118,6 +119,7 @@ define Device/qcom_ipq8064-ap148-legacy
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := ap148
+	SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
 	DEVICE_TITLE := Qualcomm AP148 (legacy)
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0
 endef
@@ -129,6 +131,7 @@ define Device/tplink_c2600
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := c2600
+	SUPPORTED_DEVICES += c2600
 	TPLINK_BOARD_ID := C2600
 	DEVICE_TITLE := TP-Link Archer C2600
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0
@@ -144,6 +147,7 @@ define Device/netgear_d7800
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := d7800
+	SUPPORTED_DEVICES += d7800
 	DEVICE_TITLE := Netgear Nighthawk X4 D7800
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0
 endef
@@ -169,6 +173,7 @@ define Device/linksys_ea8500
 	KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
 	PROFILES += $$(DEVICE_NAME)
 	BOARD_NAME := ea8500
+	SUPPORTED_DEVICES += ea8500
 	UBINIZE_OPTS := -E 5
 	IMAGES := factory.bin sysupgrade.tar
 	IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
@@ -201,6 +206,7 @@ define Device/netgear_r7500
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := r7500
+	SUPPORTED_DEVICES += r7500
 	DEVICE_TITLE := Netgear Nighthawk X4 R7500
 	DEVICE_PACKAGES := ath10k-firmware-qca988x
 endef
@@ -215,6 +221,7 @@ define Device/netgear_r7500v2
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := r7500v2
+	SUPPORTED_DEVICES += r7500v2
 	DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
 endef
@@ -229,6 +236,7 @@ define Device/netgear_r7800
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := r7800
+	SUPPORTED_DEVICES += r7800
 	DEVICE_TITLE := Netgear Nighthawk X4S R7800
 	DEVICE_PACKAGES := ath10k-firmware-qca9984
 endef
@@ -239,6 +247,7 @@ define Device/zyxel_nbg6817
 	KERNEL_SIZE := 4096k
 	BLOCKSIZE := 64k
 	BOARD_NAME := nbg6817
+	SUPPORTED_DEVICES += nbg6817
 	DEVICE_TITLE := ZyXEL NBG6817
 	DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
 	$(call Device/ZyXELImage)
@@ -256,6 +265,7 @@ define Device/tplink_vr2600v
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	BOARD_NAME := vr2600v
+	SUPPORTED_DEVICES += vr2600v
 	DEVICE_TITLE := TP-Link Archer VR2600v
 	DEVICE_PACKAGES := ath10k-firmware-qca99x0
 	IMAGES := sysupgrade.bin