From: Fabio Estevam Date: Thu, 18 Jun 2020 23:21:17 +0000 (-0300) Subject: phy: atheros: ar8035: Fix clock output calculation X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=338d9b032a2ab0dbbcfcf1bfe373b4852399a636;p=oweals%2Fu-boot.git phy: atheros: ar8035: Fix clock output calculation The clock ouput frequency is calculated incorrectly for AR8035 due to wrong masking of priv->clk_25m_reg and priv->clk_25m_mask. This same issue has been already fixed in the kernel by: commit b1f4c209d84057b6d40b939b6e4404854271d797 Author: Oleksij Rempel Date: Wed Apr 1 11:57:32 2020 +0200 net: phy: at803x: fix clock sink configuration on ATH8030 and ATH8035 The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set for the values that comprise the fields, not zero-bits-set. This patch fixes the clock frequency configuration for ATH8030 and ATH8035 Atheros PHYs by removing the erroneous "~". To reproduce this bug, configure the PHY with the device tree binding "qca,clk-out-frequency" and remove the machine specific PHY fixups. Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding") Signed-off-by: Oleksij Rempel Reported-by: Russell King Reviewed-by: Russell King Tested-by: Russell King Signed-off-by: David S. Miller Apply the same fix in the U-Boot driver. Tested on a i.MX6 Hummingboard. Signed-off-by: Fabio Estevam Reviewed-by: Michael Walle Tested-by: Tom Rini --- diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 13f7275d17..f922fecd6b 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -275,11 +275,10 @@ static int ar803x_of_init(struct phy_device *phydev) * Fixup for the AR8035 which only has two bits. The two * remaining bits map to the same frequencies. */ - if (phydev->drv->uid == AR8035_PHY_ID) { - u16 clear = AR803x_CLK_25M_MASK & AR8035_CLK_25M_MASK; - priv->clk_25m_mask &= ~clear; - priv->clk_25m_reg &= ~clear; + if (phydev->drv->uid == AR8035_PHY_ID) { + priv->clk_25m_reg &= AR8035_CLK_25M_MASK; + priv->clk_25m_mask &= AR8035_CLK_25M_MASK; } }