From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Tue, 16 Jun 2015 15:06:05 +0000 (+0530)
Subject: ARM: BeagleBoard-X15: Enable VTT regulator
X-Git-Tag: v2015.07-rc3~23
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=334bbb387f2d369f4cf0b28173f0764c8316fd5b;p=oweals%2Fu-boot.git

ARM: BeagleBoard-X15: Enable VTT regulator

BeagleBoard-X15 uses a vtt regulator for DDR3 termination
and this is controlled by gpio7_11. Configuring gpio7_11.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
index b6c17ec83f..c7f19c7924 100644
--- a/board/ti/beagle_x15/board.c
+++ b/board/ti/beagle_x15/board.c
@@ -14,6 +14,8 @@
 #include <usb.h>
 #include <asm/omap_common.h>
 #include <asm/emif.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/dra7xx_iodelay.h>
 #include <asm/arch/sys_proto.h>
@@ -30,6 +32,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* GPIO 7_11 */
+#define GPIO_DDR_VTT_EN 203
+
 const struct omap_sysinfo sysinfo = {
 	"Board: BeagleBoard x15\n"
 };
@@ -404,3 +409,21 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 #endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+/* VTT regulator enable */
+static inline void vtt_regulator_enable(void)
+{
+	if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+		return;
+
+	gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+	gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+}
+
+int board_early_init_f(void)
+{
+	vtt_regulator_enable();
+	return 0;
+}
+#endif
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
index 8d072c6ed0..c5dde99f5f 100644
--- a/include/configs/beagle_x15.h
+++ b/include/configs/beagle_x15.h
@@ -18,6 +18,8 @@
 #define CONFIG_IODELAY_RECALIBRATION
 #endif
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
 #define CONFIG_NR_DRAM_BANKS		2
 
 #define CONFIG_ENV_SIZE			(64 << 10)