From: Michal Simek Date: Sat, 21 Apr 2007 19:07:22 +0000 (+0200) Subject: [PATCH] SystemACE support for Microblaze X-Git-Tag: v1.3.0-rc1~76^2~4^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=32556443840f127170e4baa8bdd5b567039f6c36;p=oweals%2Fu-boot.git [PATCH] SystemACE support for Microblaze --- diff --git a/drivers/systemace.c b/drivers/systemace.c index 3848d9c59c..c9fd5f1670 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -211,10 +211,16 @@ static unsigned long systemace_read(int dev, unsigned long start, /* Write sector count | ReadMemCardData. */ ace_writew((trans & 0xff) | 0x0300, 0x14); +/* + * For FPGA configuration via SystemACE is reset unacceptable + * CFGDONE bit in STATUSREG is not set to 1. + */ +#ifndef SYSTEMACE_CONFIG_FPGA /* Reset the configruation controller */ val = ace_readw(0x18); val |= 0x0080; ace_writew(val, 0x18); +#endif retry = trans * 16; while (retry > 0) { diff --git a/include/configs/ml401.h b/include/configs/ml401.h index f4a8a1f228..15c2fe7ecd 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -36,7 +36,7 @@ #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ -#define CFG_RESET_ADDRESS TEXT_BASE +//#define CFG_RESET_ADDRESS TEXT_BASE /* ethernet */ #define CONFIG_EMACLITE 1 @@ -66,7 +66,7 @@ * * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 - * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 + * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 * * 0x1000_0000 CFG_SDRAM_BASE * FREE @@ -93,7 +93,8 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ +/* start of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -152,6 +153,8 @@ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_IMLS |\ CFG_CMD_FLASH |\ CFG_CMD_PING \ @@ -174,6 +177,8 @@ CFG_CMD_FLASH |\ CFG_CMD_PING |\ CFG_CMD_ENV |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_SAVES \ ) @@ -189,6 +194,8 @@ CFG_CMD_BDI |\ CFG_CMD_RUN |\ CFG_CMD_LOADS |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_LOADB |\ CFG_CMD_IMI |\ CFG_CMD_NET |\ @@ -221,10 +228,11 @@ #define CFG_HZ 1000 /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 224db5c8be..c89ef7ce5c 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -132,6 +132,8 @@ CFG_CMD_LOADS |\ CFG_CMD_LOADB |\ CFG_CMD_MISC |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_PING \ ) @@ -163,12 +165,12 @@ "base 0;" \ "echo" - /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE 0xCF000000 -#define CFG_SYSTEMACE_WIDTH 16 -#define CONFIG_DOS_PARTITION*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */