From: Chris Packham Date: Mon, 10 Dec 2018 07:07:51 +0000 (+1300) Subject: ARM: mvebu: sync Armada-38x dts with Linux 4.20 X-Git-Tag: v2019.04-rc1~31^2~14 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=30c4383da3fa2652e551b0610e71360394aa51e1;p=oweals%2Fu-boot.git ARM: mvebu: sync Armada-38x dts with Linux 4.20 Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes not taken are new compatible strings for the uart and nand flash controller. The nand binding is best updated if/when the mtd/nand infrastructure is updated. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- diff --git a/arch/arm/dts/armada-380.dtsi b/arch/arm/dts/armada-380.dtsi index 5102d19cc8..cff1269f3f 100644 --- a/arch/arm/dts/armada-380.dtsi +++ b/arch/arm/dts/armada-380.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 380 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem * Gregory CLEMENT * Thomas Petazzoni - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -71,7 +34,7 @@ }; }; - pcie-controller { + pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -104,6 +67,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -122,6 +86,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -140,6 +105,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; diff --git a/arch/arm/dts/armada-385.dtsi b/arch/arm/dts/armada-385.dtsi index 8e67d2c083..f0022d10c7 100644 --- a/arch/arm/dts/armada-385.dtsi +++ b/arch/arm/dts/armada-385.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 385 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem * Gregory CLEMENT * Thomas Petazzoni - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -70,13 +33,7 @@ }; soc { - internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - }; - }; - - pcie-controller { + pciec: pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -106,7 +63,7 @@ * configured in x4 by the bootloader, then * pcie@4,0 is not available. */ - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -115,6 +72,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -124,7 +82,7 @@ }; /* x1 port */ - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -133,6 +91,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -142,7 +101,7 @@ }; /* x1 port */ - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -151,6 +110,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; @@ -163,7 +123,7 @@ * x1 port only available when pcie@1,0 is * configured as a x1 port */ - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -172,6 +132,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <3>; @@ -182,3 +143,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6820-pinctrl"; +}; diff --git a/arch/arm/dts/armada-388-clearfog.dts b/arch/arm/dts/armada-388-clearfog.dts index 16a47d59e6..a3493ddd4d 100644 --- a/arch/arm/dts/armada-388-clearfog.dts +++ b/arch/arm/dts/armada-388-clearfog.dts @@ -118,18 +118,7 @@ status = "okay"; }; - spi1: spi@10680 { - /* - * CS0: W25Q32 - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb0: usb3@f8000 { + usb3@f8000 { /* CON7, USB-A port on back of device */ status = "okay"; }; @@ -322,6 +311,18 @@ }; }; +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + /* +#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 MPP18: gpio ? (pca9655 int?) diff --git a/arch/arm/dts/armada-388.dtsi b/arch/arm/dts/armada-388.dtsi index 564fa5937e..f3a020ff57 100644 --- a/arch/arm/dts/armada-388.dtsi +++ b/arch/arm/dts/armada-388.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 388 SoC. * @@ -5,39 +6,6 @@ * * Gregory CLEMENT * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * * The main difference with the Armada 385 is that the 388 can handle two more * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl * property and the name of the SoC, and add the second SATA host which control @@ -50,13 +18,8 @@ model = "Marvell Armada 388 family SoC"; compatible = "marvell,armada388", "marvell,armada385", "marvell,armada380"; - soc { internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6828-pinctrl"; - }; - sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -68,3 +31,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6828-pinctrl"; +}; diff --git a/arch/arm/dts/armada-38x-controlcenterdc.dts b/arch/arm/dts/armada-38x-controlcenterdc.dts index 2cc996876a..ffbd0dcaae 100644 --- a/arch/arm/dts/armada-38x-controlcenterdc.dts +++ b/arch/arm/dts/armada-38x-controlcenterdc.dts @@ -72,40 +72,6 @@ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; internal-regs { - spi0: spi@10600 { - status = "okay"; - sc16is741: sc16is741@0 { - compatible = "nxp,sc16is741"; - reg = <0>; - clocks = <&sc16isclk>; - spi-max-frequency = <4000000>; - interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - spi1: spi@10680 { - status = "okay"; - u-boot,dm-pre-reloc; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q016a", "spi-flash"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - spi-flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a11", "spi-flash"; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <108000000>; - u-boot,dm-pre-reloc; - }; - }; - I2C0: i2c@11000 { status = "okay"; clock-frequency = <1000000>; @@ -586,3 +552,37 @@ }; }; }; + +&spi0 { + status = "okay"; + sc16is741: sc16is741@0 { + compatible = "nxp,sc16is741"; + reg = <0>; + clocks = <&sc16isclk>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&spi1 { + status = "okay"; + u-boot,dm-pre-reloc; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q016a", "spi-flash"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "spi-flash"; + reg = <1>; /* Chip select 1 */ + spi-max-frequency = <108000000>; + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi index 5e5a158551..72c49beb71 100644 --- a/arch/arm/dts/armada-38x.dtsi +++ b/arch/arm/dts/armada-38x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 38x family of SoCs. * @@ -6,44 +7,6 @@ * Lior Amsalem * Gregory CLEMENT * Thomas Petazzoni - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -83,7 +46,7 @@ reg = ; }; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = ; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -93,7 +56,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = ; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -103,7 +66,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = ; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -113,7 +76,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = ; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -123,7 +86,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = ; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -145,6 +108,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <0>; + prefetch-data = <1>; }; scu@c000 { @@ -152,6 +119,13 @@ reg = <0xc000 0x58>; }; + timer@c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xc200 0x20>; + interrupts = ; + clocks = <&coreclk 2>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -168,32 +142,8 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -204,7 +154,7 @@ }; i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -258,19 +208,6 @@ marvell,function = "i2c0"; }; - nand_pins: nand-pins { - marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", - "mpp38", "mpp28", "mpp40", "mpp42", - "mpp35", "mpp36", "mpp25", "mpp30", - "mpp32"; - marvell,function = "dev"; - }; - - nand_rb: nand-rb { - marvell,pins = "mpp41"; - marvell,function = "nand"; - }; - mdio_pins: mdio-pins { marvell,pins = "mpp4", "mpp5"; marvell,function = "ge"; @@ -298,6 +235,20 @@ marvell,function = "spi1"; }; + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", + "mpp33", "mpp38", "mpp28", + "mpp40", "mpp42", "mpp35", + "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0"; @@ -338,34 +289,42 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = , , , ; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = , , , ; + clocks = <&coreclk 0>; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-380-system-controller", "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -386,7 +345,8 @@ mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; }; mpic: interrupt-controller@20a00 { @@ -399,7 +359,7 @@ interrupts = ; }; - timer@20300 { + timer: timer@20300 { compatible = "marvell,armada-380-timer", "marvell,armada-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; @@ -413,14 +373,14 @@ clock-names = "nbclk", "fixed"; }; - watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-380-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; }; - cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; @@ -430,16 +390,37 @@ reg = <0x20d20 0x6c>; }; - coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; }; - pmsu@22000 { + pmsu: pmsu@22000 { compatible = "marvell,armada-380-pmsu"; reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -456,7 +437,7 @@ status = "disabled"; }; - usb@58000 { + usb0: usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = ; @@ -464,8 +445,8 @@ status = "disabled"; }; - xor@60800 { - compatible = "marvell,orion-xor"; + xor0: xor@60800 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -484,8 +465,8 @@ }; }; - xor@60900 { - compatible = "marvell,orion-xor"; + xor1: xor@60900 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; @@ -504,14 +485,6 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -520,14 +493,29 @@ clocks = <&gateclk 4>; }; - rtc@a3800 { + cesa: crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = , + ; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + + rtc: rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; reg-names = "rtc", "rtc-soc"; interrupts = ; }; - sata@a8000 { + ahci0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = ; @@ -535,7 +523,15 @@ status = "disabled"; }; - sata@e0000 { + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + + ahci1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = ; @@ -551,23 +547,23 @@ clock-output-names = "nand"; }; - thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada380-thermal"; - reg = <0xe4078 0x4>, <0xe4074 0x4>; + reg = <0xe4078 0x4>, <0xe4070 0x8>; status = "okay"; }; - flash@d0000 { + nand_controller: nand-controller@d0000 { compatible = "marvell,armada370-nand","marvell,mvebu-pxa3xx-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = ; clocks = <&coredivclk 0>; status = "disabled"; }; - sdhci@d8000 { + sdhci: sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; reg-names = "sdhci", "mbus", "conf-sdio3"; reg = <0xd8000 0x1000>, @@ -579,7 +575,7 @@ status = "disabled"; }; - usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = ; @@ -587,7 +583,7 @@ status = "disabled"; }; - usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = ; @@ -595,10 +591,63 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = ; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>;