From: Piotr Dymacz Date: Tue, 17 Oct 2017 21:30:01 +0000 (+0200) Subject: ar71xx: add support for GL.iNet GL-AR750 X-Git-Tag: v18.06.0-rc1~1266 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2e5252d346e2ec832a203af778b5c1d949f0ae5f;p=oweals%2Fopenwrt.git ar71xx: add support for GL.iNet GL-AR750 GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 1x USB 2.0 (power controlled by GPIO) - 1x microSD (GL857L) - 3x LED (all driven by GPIO) - 1x button (reset) - 1x 2-pos switch - header for optional PoE module - 1x micro USB for main power input - UART + I2C header on PCB Flash instruction: Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used to flash OpenWrt/LEDE firmware. Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index f39109af44..fac9dfa7ab 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -407,6 +407,10 @@ dlan-pro-1200-ac) gl-ar300m) ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" ;; +gl-ar750) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt" + ;; gl-mifi) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 6a338aeeba..558b0381f0 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -390,6 +390,12 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" ;; + gl-ar750|\ + rb-435g) + ucidef_set_interfaces_lan_wan "eth1.1" "eth0" + ucidef_add_switch "switch0" \ + "0@eth1" "1:lan" "2:lan" + ;; jwap230) ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" ucidef_add_switch "switch0" \ @@ -402,11 +408,6 @@ ar71xx_setup_interfaces() onion-omega) ucidef_set_interface_lan "wlan0" ;; - rb-435g) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" - ;; rb-450) ucidef_set_interfaces_lan_wan "eth1.1" "eth0" ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 00ddeeac50..2720288e3d 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -210,6 +210,7 @@ get_status_led() { esr1750) status_led="$board:amber:power" ;; + gl-ar750|\ hiveap-121|\ nbg6716) status_led="$board:white:power" @@ -527,7 +528,8 @@ set_state() { done) status_led_on case $(board_name) in - gl-ar300m) + gl-ar300m|\ + gl-ar750) fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0 ;; qihoo-c301) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index d7d99f8edb..1876b0084f 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -89,6 +89,11 @@ case "$FIRMWARE" in ath10kcal_extract "caldata" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; + gl-ar750|\ + tl-wpa8630) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) + ;; mc-mac1200r) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) @@ -105,10 +110,6 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; - tl-wpa8630) - ath10kcal_extract "art" 20480 2116 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; unifiac-lite|\ unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index d62dff593e..d2c68fbb2c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -673,6 +673,9 @@ ar71xx_board_detect() { *"GL-AR300M") name="gl-ar300m" ;; + *"GL-AR750") + name="gl-ar750" + ;; *"GL-CONNECT INET v1") name="gl-inet" diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx index ece961e7ce..909e615092 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx @@ -17,6 +17,7 @@ set_preinit_iface() { archer-c7|\ bhr-4grv2|\ dir-505-a1|\ + gl-ar750|\ gl-inet|\ jwap003|\ pb42|\ diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 108c90b1fe..2231069c4d 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -242,6 +242,7 @@ platform_check_image() { gl-ar150|\ gl-ar300m|\ gl-ar300|\ + gl-ar750|\ gl-domino|\ gl-mifi|\ gl-usb150|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 44303f1be0..8ecf7e1355 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -114,6 +114,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_AR150 is not set # CONFIG_ATH79_MACH_GL_AR300 is not set # CONFIG_ATH79_MACH_GL_AR300M is not set +# CONFIG_ATH79_MACH_GL_AR750 is not set # CONFIG_ATH79_MACH_GL_DOMINO is not set # CONFIG_ATH79_MACH_GL_INET is not set # CONFIG_ATH79_MACH_GL_MIFI is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 1e4b3ab87d..0e224ae1c4 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -112,6 +112,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_AR150 is not set # CONFIG_ATH79_MACH_GL_AR300 is not set # CONFIG_ATH79_MACH_GL_AR300M is not set +# CONFIG_ATH79_MACH_GL_AR750 is not set # CONFIG_ATH79_MACH_GL_DOMINO is not set # CONFIG_ATH79_MACH_GL_INET is not set # CONFIG_ATH79_MACH_GL_MIFI is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index dae68d0fb7..3ca77550bc 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -770,6 +770,17 @@ config ATH79_MACH_GL_AR300M select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_GL_AR750 + bool "GL.iNet GL-AR750 support" + select SOC_QCA953X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_GL_DOMINO bool "DOMINO support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index b7caa5a770..e9f4d9852b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o +obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c new file mode 100644 index 0000000000..9ee6e29c02 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c @@ -0,0 +1,146 @@ +/* + * GL.iNet GL-AR750 board support + * + * Copyright (C) 2018 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define GL_AR750_GPIO_LED_POWER 12 +#define GL_AR750_GPIO_LED_WLAN2G 14 +#define GL_AR750_GPIO_LED_WLAN5G 13 + +#define GL_AR750_GPIO_BTN_RESET 3 +#define GL_AR750_GPIO_BTN_SW1 0 + +#define GL_AR750_GPIO_I2C_SCL 16 +#define GL_AR750_GPIO_I2C_SDA 17 + +#define GL_AR750_GPIO_USB_POWER 2 + +#define GL_AR750_KEYS_POLL_INTERVAL 20 +#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL) + +#define GL_AR750_MAC0_OFFSET 0 +#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000 +#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000 + +static struct gpio_led gl_ar750_leds_gpio[] __initdata = { + { + .name = "gl-ar750:white:power", + .gpio = GL_AR750_GPIO_LED_POWER, + .default_state = LEDS_GPIO_DEFSTATE_KEEP, + .active_low = 1, + }, { + .name = "gl-ar750:white:wlan2g", + .gpio = GL_AR750_GPIO_LED_WLAN2G, + .active_low = 1, + }, { + .name = "gl-ar750:white:wlan5g", + .gpio = GL_AR750_GPIO_LED_WLAN5G, + .active_low = 1, + }, +}; + +static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR750_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "sw1", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR750_GPIO_BTN_SW1, + .active_low = 1, + }, +}; + +static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = { + .sda_pin = GL_AR750_GPIO_I2C_SDA, + .scl_pin = GL_AR750_GPIO_I2C_SCL, +}; + +static struct platform_device gl_ar750_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &gl_ar750_i2c_gpio_data, + }, +}; + +static void __init gl_ar750_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1f050000); + + ath79_register_m25p80(NULL); + + ath79_setup_ar933x_phy4_switch(false, false); + ath79_register_mdio(0, 0x0); + + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = 0xfc; + + /* WAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.speed = SPEED_100; + ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0); + ath79_register_eth(0); + + /* LAN */ + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1); + ath79_register_eth(1); + + /* Disable JTAG (enables GPIO0-3) */ + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio), + gl_ar750_leds_gpio); + + ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gl_ar750_gpio_keys), + gl_ar750_gpio_keys); + + gpio_request_one(GL_AR750_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + + platform_device_register(&gl_ar750_i2c_gpio); + + ath79_register_usb(); + + ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL); + + ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750", + gl_ar750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 4afda05638..1a2c0386f8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -114,6 +114,7 @@ enum ath79_mach_type { ATH79_MACH_GL_AR150, /* GL-AR150 support */ ATH79_MACH_GL_AR300, /* GL-AR300 */ ATH79_MACH_GL_AR300M, /* GL-AR300M */ + ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */ ATH79_MACH_GL_DOMINO, /* Domino */ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ ATH79_MACH_GL_MIFI, /* GL-MIFI support */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 06d5223d6c..cac1a27c3b 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -85,6 +85,7 @@ CONFIG_ATH79_MACH_FRITZ300E=y CONFIG_ATH79_MACH_GL_AR150=y CONFIG_ATH79_MACH_GL_AR300=y CONFIG_ATH79_MACH_GL_AR300M=y +CONFIG_ATH79_MACH_GL_AR750=y CONFIG_ATH79_MACH_GL_DOMINO=y CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GL_MIFI=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 65a7eb79c0..88b9f930b6 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -330,6 +330,19 @@ define Device/gl-ar300m endef TARGET_DEVICES += gl-ar300m +define Device/gl-ar750 + DEVICE_TITLE := GL.iNet GL-AR750 + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \ + kmod-usb2 kmod-usb-storage + BOARDNAME := GL-AR750 + SUPPORTED_DEVICES := gl-ar750 + IMAGE_SIZE := 16000k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += gl-ar750 + define Device/gl-domino DEVICE_TITLE := GL.iNet Domino Pi DEVICE_PACKAGES := kmod-usb-core kmod-usb2