From: Steven Barth Date: Wed, 24 Apr 2013 07:21:42 +0000 (+0000) Subject: 6relayd: update package description X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2dbcd2ba7b582ecef5d065e887790cff6af33715;p=librecmc%2Flibrecmc.git 6relayd: update package description SVN-Revision: 36413 --- diff --git a/package/network/ipv6/6relayd/Makefile b/package/network/ipv6/6relayd/Makefile index 98c15d2979..9307c4eda6 100644 --- a/package/network/ipv6/6relayd/Makefile +++ b/package/network/ipv6/6relayd/Makefile @@ -25,18 +25,17 @@ include $(INCLUDE_DIR)/cmake.mk define Package/6relayd SECTION:=ipv6 CATEGORY:=IPv6 - TITLE:=IPv6-Relay and Server (RD-, DHCPv6- & NDP-Proxy) + TITLE:=DHCPv6(-PD)/RA Server & Relay DEPENDS:=+kmod-ipv6 endef define Package/6relayd/description - 6relayd is an IPv6-tool that relays IPv6-management protocols like router - discovery, neighbor discovery and DHCPv6 so that clients on routed (non- - bridged) interfaces can use the public address prefix, DHCPv6 and DNS-service - of a master interface. This is useful to avoid NAT in chained IPv6-routers. + 6relayd is a daemon for serving and relaying IPv6 management protocols to + configure clients and downstream routers. - It can also be used as a lightweight router advertisement daemon and provide - stateless DHCPv6 service for clients and act as PD-server where size matters. + 6relayd provides server services for RA, stateless DHCPv6, DHCPv6-PD and can + be used to relay RA, DHCPv6 and NDP between routed (non-bridged) interfaces + in case no delegated prefixes are provided by the upstream router. endef define Package/6relayd/conffiles