From: Marek Vasut Date: Wed, 22 Apr 2020 11:18:14 +0000 (+0200) Subject: ARM: stm32: Implement DDR3 coding on DHCOR SoM X-Git-Tag: v2020.07-rc3~19^2~51 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2d68365da17b7dc45543daaa9c5010c11332ba09;p=oweals%2Fu-boot.git ARM: stm32: Implement DDR3 coding on DHCOR SoM The DHCOR board does exist in multiple variants with different DDR3 DRAM sizes. To cater for all of them, implement DDR3 code handling. There are two GPIOs which code the DRAM size populated on the SoM, read them out and use the value to pick the correct DDR3 config. Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut Cc: Manivannan Sadhasivam Cc: Patrick Delaunay Cc: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 54f7ec57b7..c1702f8892 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -5,6 +5,7 @@ #include #include "stm32mp15-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -24,6 +25,7 @@ st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; + dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>; }; led { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index aa81ed8393..c827e52b58 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -9,11 +9,13 @@ #include #include "stm32mp15-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { u-boot,dm-pre-reloc; config { + dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>; dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; }; }; diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index 5193868d7c..9a2926bbe5 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -135,6 +135,7 @@ int checkboard(void) #ifdef CONFIG_BOARD_EARLY_INIT_F static u8 brdcode __section("data"); +static u8 ddr3code __section("data"); static u8 somcode __section("data"); static void board_get_coding_straps(void) @@ -150,6 +151,7 @@ static void board_get_coding_straps(void) } brdcode = 0; + ddr3code = 0; somcode = 0; ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios", @@ -158,13 +160,34 @@ static void board_get_coding_straps(void) for (i = 0; i < ret; i++) somcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + ret = gpio_request_list_by_name_nodev(node, "dh,ddr3-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + ddr3code |= !!dm_gpio_get_value(&(gpio[i])) << i; + ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios", gpio, ARRAY_SIZE(gpio), GPIOD_IS_IN); for (i = 0; i < ret; i++) brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i; - printf("Code: SoM:rev=%d Board:rev=%d\n", somcode, brdcode); + printf("Code: SoM:rev=%d,ddr3=%d Board:rev=%d\n", + somcode, ddr3code, brdcode); +} + +int board_stm32mp1_ddr_config_name_match(struct udevice *dev, + const char *name) +{ + if (ddr3code == 2 && + !strcmp(name, "st,ddr3-1066-888-bin-g-1x4gb-533mhz")) + return 0; + + if (ddr3code == 3 && + !strcmp(name, "st,ddr3-1066-888-bin-g-2x4gb-533mhz")) + return 0; + + return -EINVAL; } int board_early_init_f(void) @@ -537,6 +560,7 @@ int board_late_init(void) #ifdef CONFIG_BOARD_EARLY_INIT_F env_set_ulong("dh_som_rev", somcode); env_set_ulong("dh_board_rev", brdcode); + env_set_ulong("dh_ddr3_code", ddr3code); #endif return 0;