From: wdenk Date: Sun, 10 Oct 2004 17:05:18 +0000 (+0000) Subject: * Patch by Gary Jennejohn, 01 Oct 2004: X-Git-Tag: LABEL_2006_03_12_0025~474 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2cbe571a5676a41aa32ff98e9b1a2934e3922574;p=oweals%2Fu-boot.git * Patch by Gary Jennejohn, 01 Oct 2004: - add support for CMC PU2 board - add support for I2C on at91rm9200 * Patch by Gary Jennejohn, 28 Sep 2004: fix baudrate handling on at91rm9200 --- diff --git a/CHANGELOG b/CHANGELOG index 257e787392..acc800e42d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Gary Jennejohn, 01 Oct 2004: + - add support for CMC PU2 board + - add support for I2C on at91rm9200 + +* Patch by Gary Jennejohn, 28 Sep 2004: + fix baudrate handling on at91rm9200 + * Patch by Yuli Barcohen, 22 Aug 2004: - remove ZPC.1900 board-specific flash driver; switch the port to generic CFI driver; diff --git a/Makefile b/Makefile index 8c3ff7ec34..d43add4d89 100644 --- a/Makefile +++ b/Makefile @@ -1294,6 +1294,9 @@ evb4510_config : unconfig at91rm9200dk_config : unconfig @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk +cmc_pu2_config : unconfig + @./mkconfig $(@:_config=) arm at91rm9200 cmc_pu2 + ######################################################################### ## XScale Systems ######################################################################### diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile new file mode 100644 index 0000000000..f94bd990da --- /dev/null +++ b/board/cmc_pu2/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := at91rm9200dk.o at45.o dm9161.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/cmc_pu2/at45.c b/board/cmc_pu2/at45.c new file mode 100644 index 0000000000..3c00132164 --- /dev/null +++ b/board/cmc_pu2/at45.c @@ -0,0 +1,621 @@ +/* Driver for ATMEL DataFlash support + * Author : Hamid Ikdoumi (Atmel) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include + +#ifdef CONFIG_HAS_DATAFLASH +#include + +#define AT91C_SPI_CLK 10000000 /* Max Value = 10MHz to be compliant to +the Continuous Array Read function */ + +/* AC Characteristics */ +/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ +#define DATAFLASH_TCSS (0xC << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +#define AT91C_TIMEOUT_WRDY 200000 +#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ +#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ + +void AT91F_SpiInit(void) { + +/*-------------------------------------------------------------------*/ +/* SPI DataFlash Init */ +/*-------------------------------------------------------------------*/ + /* Configure PIOs */ + AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | + AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; + AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | + AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; + /* Enable CLock */ + AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; + + /* Reset the SPI */ + AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; + + /* Configure SPI in Master Mode with No CS selected !!! */ + AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; + + /* Configure CS0 and CS3 */ + *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & + DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); + + *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & + DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); + +} + +void AT91F_SpiEnable(int cs) { + switch(cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; + AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS); + break; + case 3: /* Configure SPI CS3 for Serial DataFlash Card */ + /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ + AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ + AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ + /* Clear Output */ + AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; + /* Configure PCS */ + AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; + AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); + break; + } + + /* SPI_Enable */ + AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; +} + +/*----------------------------------------------------------------------------*/ +/* \fn AT91F_SpiWrite */ +/* \brief Set the PDC registers for a transfert */ +/*----------------------------------------------------------------------------*/ +unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc ) +{ + unsigned int timeout; + + pDesc->state = BUSY; + + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + + /* Initialize the Transmit and Receive Pointer */ + AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; + AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; + + /* Intialize the Transmit and Receive Counters */ + AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; + AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; + + if ( pDesc->tx_data_size != 0 ) { + /* Initialize the Next Transmit and Next Receive Pointer */ + AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; + AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; + + /* Intialize the Next Transmit and Next Receive Counters */ + AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; + AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; + } + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + timeout = 0; + + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; + while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT)); + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + pDesc->state = IDLE; + + if (timeout >= CFG_SPI_WRITE_TOUT){ + printf("Error Timeout\n\r"); + return DATAFLASH_ERROR; + } + + return DATAFLASH_OK; +} + + +/*----------------------------------------------------------------------*/ +/* \fn AT91F_DataFlashSendCommand */ +/* \brief Generic function to send a command to the dataflash */ +/*----------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashSendCommand( + AT91PS_DataFlash pDataFlash, + unsigned char OpCode, + unsigned int CmdSize, + unsigned int DataflashAddress) +{ + unsigned int adr; + + if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + return DATAFLASH_BUSY; + + /* process the address to obtain page address and byte address */ + adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size)); + + /* fill the command buffer */ + pDataFlash->pDataFlashDesc->command[0] = OpCode; + if (pDataFlash->pDevice->pages_number >= 16384) { + pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); + pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); + } else { + pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; + pDataFlash->pDataFlashDesc->command[4] = 0; + } + pDataFlash->pDataFlashDesc->command[5] = 0; + pDataFlash->pDataFlashDesc->command[6] = 0; + pDataFlash->pDataFlashDesc->command[7] = 0; + + /* Initialize the SpiData structure for the spi write fuction */ + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; + + /* send the command and read the data */ + return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); +} + + +/*----------------------------------------------------------------------*/ +/* \fn AT91F_DataFlashGetStatus */ +/* \brief Read the status register of the dataflash */ +/*----------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) +{ + AT91S_DataFlashStatus status; + + /* if a transfert is in progress ==> return 0 */ + if( (pDesc->state) != IDLE) + return DATAFLASH_BUSY; + + /* first send the read status command (D7H) */ + pDesc->command[0] = DB_STATUS; + pDesc->command[1] = 0; + + pDesc->DataFlash_state = GET_STATUS; + pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ + pDesc->tx_cmd_pt = pDesc->command ; + pDesc->rx_cmd_pt = pDesc->command ; + pDesc->rx_cmd_size = 2 ; + pDesc->tx_cmd_size = 2 ; + status = AT91F_SpiWrite (pDesc); + + pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); + + return status; +} + + +/*----------------------------------------------------------------------*/ +/* \fn AT91F_DataFlashWaitReady */ +/* \brief wait for dataflash ready (bit7 of the status register == 1) */ +/*----------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout) +{ + pDataFlashDesc->DataFlash_state = IDLE; + + do { + AT91F_DataFlashGetStatus(pDataFlashDesc); + timeout--; + } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) ); + + if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) + return DATAFLASH_ERROR; + + return DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashContinuousRead */ +/* Object : Continuous stream Read */ +/* Input Parameters : DataFlash Service */ +/* : = dataflash address */ +/* : <*dataBuffer> = data buffer pointer */ +/* : = data buffer size */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( + AT91PS_DataFlash pDataFlash, + int src, + unsigned char *dataBuffer, + int sizeToRead ) +{ + AT91S_DataFlashStatus status; + /* Test the size to read in the device */ + if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) + return DATAFLASH_MEMORY_OVERFLOW; + + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; + + status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); + /* Send the command to the dataflash */ + return(status); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashPagePgmBuf */ +/* Object : Main memory page program through buffer 1 or buffer 2 */ +/* Input Parameters : DataFlash Service */ +/* : <*src> = Source buffer */ +/* : = dataflash destination address */ +/* : = data buffer size */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( + AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int SizeToWrite) +{ + int cmdsize; + pDataFlash->pDataFlashDesc->tx_data_pt = src ; + pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; + pDataFlash->pDataFlashDesc->rx_data_pt = src; + pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; + + cmdsize = 4; + /* Send the command to the dataflash */ + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest)); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_MainMemoryToBufferTransfert */ +/* Object : Read a page in the SRAM Buffer 1 or 2 */ +/* Input Parameters : DataFlash Service */ +/* : Page concerned */ +/* : */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int page) +{ + int cmdsize; + /* Test if the buffer command is legal */ + if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) + return DATAFLASH_BAD_COMMAND; + + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size)); +} + + +/*----------------------------------------------------------------------------- */ +/* Function Name : AT91F_DataFlashWriteBuffer */ +/* Object : Write data to the internal sram buffer 1 or 2 */ +/* Input Parameters : DataFlash Service */ +/* : = command to write buffer1 or buffer2 */ +/* : <*dataBuffer> = data buffer to write */ +/* : = address in the internal buffer */ +/* : = data buffer size */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned char *dataBuffer, + unsigned int bufferAddress, + int SizeToWrite ) +{ + int cmdsize; + /* Test if the buffer command is legal */ + if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) + return DATAFLASH_BAD_COMMAND; + + /* buffer address must be lower than page size */ + if (bufferAddress > pDataFlash->pDevice->pages_size) + return DATAFLASH_BAD_ADDRESS; + + if ( (pDataFlash->pDataFlashDesc->state) != IDLE) + return DATAFLASH_BUSY; + + /* Send first Write Command */ + pDataFlash->pDataFlashDesc->command[0] = BufferCommand; + pDataFlash->pDataFlashDesc->command[1] = 0; + if (pDataFlash->pDevice->pages_number >= 16384) { + pDataFlash->pDataFlashDesc->command[2] = 0; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; + pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; + cmdsize = 5; + } else { + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; + pDataFlash->pDataFlashDesc->command[4] = 0; + cmdsize = 4; + } + + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; + + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; + pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; + pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; + + return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); +} + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_PageErase */ +/* Object : Erase a page */ +/* Input Parameters : DataFlash Service */ +/* : Page concerned */ +/* : */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_PageErase( + AT91PS_DataFlash pDataFlash, + unsigned int page) +{ + int cmdsize; + /* Test if the buffer command is legal */ + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size)); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_BlockErase */ +/* Object : Erase a Block */ +/* Input Parameters : DataFlash Service */ +/* : Page concerned */ +/* : */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_BlockErase( + AT91PS_DataFlash pDataFlash, + unsigned int block) +{ + int cmdsize; + /* Test if the buffer command is legal */ + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size)); +} + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_WriteBufferToMain */ +/* Object : Write buffer to the main memory */ +/* Input Parameters : DataFlash Service */ +/* : = command to send to buffer1 or buffer2 */ +/* : = main memory address */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_WriteBufferToMain ( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int dest ) +{ + int cmdsize; + /* Test if the buffer command is correct */ + if ((BufferCommand != DB_BUF1_PAGE_PGM) && + (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && + (BufferCommand != DB_BUF2_PAGE_PGM) && + (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) + return DATAFLASH_BAD_COMMAND; + + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + /* Send the command to the dataflash */ + return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_PartialPageWrite */ +/* Object : Erase partielly a page */ +/* Input Parameters : = page number */ +/* : = adr to begin the fading */ +/* : = Number of bytes to erase */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_PartialPageWrite ( + AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int size) +{ + unsigned int page; + unsigned int AdrInPage; + + page = dest / (pDataFlash->pDevice->pages_size); + AdrInPage = dest % (pDataFlash->pDevice->pages_size); + + /* Read the contents of the page in the Sram Buffer */ + AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + /*Update the SRAM buffer */ + AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + + /* Erase page if a 128 Mbits device */ + if (pDataFlash->pDevice->pages_number >= 16384) { + AT91F_PageErase(pDataFlash, page); + /* Rewrite the modified Sram Buffer in the main memory */ + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + } + + /* Rewrite the modified Sram Buffer in the main memory */ + return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size))); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashWrite */ +/* Object : */ +/* Input Parameters : <*src> = Source buffer */ +/* : = dataflash adress */ +/* : = data buffer size */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashWrite( + AT91PS_DataFlash pDataFlash, + unsigned char *src, + int dest, + int size ) +{ + unsigned int length; + unsigned int page; + unsigned int status; + + AT91F_SpiEnable(pDataFlash->pDevice->cs); + + if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) + return DATAFLASH_MEMORY_OVERFLOW; + + /* If destination does not fit a page start address */ + if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { + length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); + + if (size < length) + length = size; + + if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) + return DATAFLASH_ERROR; + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + + /* Update size, source and destination pointers */ + size -= length; + dest += length; + src += length; + } + + while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) { + /* program dataflash page */ + page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); + + status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + + status = AT91F_PageErase(pDataFlash, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + if (!status) + return DATAFLASH_ERROR; + + status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); + if(!status) + return DATAFLASH_ERROR; + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + + /* Update size, source and destination pointers */ + size -= pDataFlash->pDevice->pages_size ; + dest += pDataFlash->pDevice->pages_size ; + src += pDataFlash->pDevice->pages_size ; + } + + /* If still some bytes to read */ + if ( size > 0 ) { + /* program dataflash page */ + if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) + return DATAFLASH_ERROR; + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); + } + return DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashRead */ +/* Object : Read a block in dataflash */ +/* Input Parameters : */ +/* Return value : */ +/*------------------------------------------------------------------------------*/ +int AT91F_DataFlashRead( + AT91PS_DataFlash pDataFlash, + unsigned long addr, + unsigned long size, + char *buffer) +{ + unsigned long SizeToRead; + + AT91F_SpiEnable(pDataFlash->pDevice->cs); + + if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) + return -1; + + while (size) { + SizeToRead = (size < 0x8000)? size:0x8000; + + if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) + return -1; + + if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK) + return -1; + + size -= SizeToRead; + addr += SizeToRead; + buffer += SizeToRead; + } + + return DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataflashProbe */ +/* Object : */ +/* Input Parameters : */ +/* Return value : Dataflash status register */ +/*------------------------------------------------------------------------------*/ +int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) +{ + AT91F_SpiEnable(cs); + AT91F_DataFlashGetStatus(pDesc); + return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); +} + +#endif diff --git a/board/cmc_pu2/at91rm9200dk.c b/board/cmc_pu2/at91rm9200dk.c new file mode 100644 index 0000000000..606ea48816 --- /dev/null +++ b/board/cmc_pu2/at91rm9200dk.c @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Enable Ctrlc */ + console_init_f (); + + /* Correct IRDA resistor problem */ + /* Set PA23_TXD in Output */ + (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of AT91RM9200DK-Board */ + gd->bd->bi_arch_number = 251; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +/* + * Disk On Chip (NAND) Millenium initialization. + * The NAND lives in the CS2* space + */ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +extern ulong nand_probe (ulong physadr); + +#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ +void nand_init (void) +{ + /* Setup Smart Media, fitst enable the address range of CS3 */ + *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; + /* set the bus interface characteristics based on + tDS Data Set up Time 30 - ns + tDH Data Hold Time 20 - ns + tALS ALE Set up Time 20 - ns + 16ns at 60 MHz ~= 3 */ +/*memory mapping structures */ +#define SM_ID_RWH (5 << 28) +#define SM_RWH (1 << 28) +#define SM_RWS (0 << 24) +#define SM_TDF (1 << 8) +#define SM_NWS (3) + AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | + AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | + SM_TDF | AT91C_SMC2_WSEN | SM_NWS); + + /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ + *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | + AT91C_PC3_BFBAA_SMWE; + *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | + AT91C_PC3_BFBAA_SMWE; + + /* Configure PC2 as input (signal READY of the SmartMedia) */ + *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ + *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ + + /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ + *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ + *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ + + /* PIOB and PIOC clock enabling */ + *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; + *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; + + if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) + printf (" No SmartMedia card inserted\n"); +#ifdef DEBUG + printf (" SmartMedia card inserted\n"); + + printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); +#endif + printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20); +} +#endif diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk new file mode 100644 index 0000000000..9ce161e55f --- /dev/null +++ b/board/cmc_pu2/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000 diff --git a/board/cmc_pu2/dm9161.c b/board/cmc_pu2/dm9161.c new file mode 100644 index 0000000000..73537c037d --- /dev/null +++ b/board/cmc_pu2/dm9161.c @@ -0,0 +1,243 @@ +/* + * (C) Copyright 2003 + * Author : Hamid Ikdoumi (Atmel) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_DRIVER_ETHER + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +/* + * Name: + * dm9161_IsPhyConnected + * Description: + * Reads the 2 PHY ID registers + * Arguments: + * p_mac - pointer to AT91S_EMAC struct + * Return value: + * TRUE - if id read successfully + * FALSE- if error + */ +static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac) +{ + unsigned short Id1, Id2; + + at91rm9200_EmacEnableMDIO (p_mac); + at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1); + at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2); + at91rm9200_EmacDisableMDIO (p_mac); + + if ((Id1 == (DM9161_PHYID1_OUI >> 6)) && + ((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK))) + return TRUE; + + return FALSE; +} + +/* + * Name: + * dm9161_GetLinkSpeed + * Description: + * Link parallel detection status of MAC is checked and set in the + * MAC configuration registers + * Arguments: + * p_mac - pointer to MAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac) +{ + unsigned short stat1, stat2; + + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1)) + return FALSE; + + if (!(stat1 & DM9161_LINK_STATUS)) /* link status up? */ + return FALSE; + + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2)) + return FALSE; + + if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) { + /*set Emac for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + return TRUE; + } + + if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) { + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + return TRUE; + } + + if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) { + /*set MII for 100BaseTX and Half Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_SPD; + return TRUE; + } + + if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) { + /*set MII for 10BaseT and Half Duplex */ + p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD); + return TRUE; + } + return FALSE; +} + + +/* + * Name: + * dm9161_InitPhy + * Description: + * MAC starts checking its link by using parallel detection and + * Autonegotiation and the same is set in the MAC configuration registers + * Arguments: + * p_mac - pointer to struct AT91S_EMAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac) +{ + UCHAR ret = TRUE; + unsigned short IntValue; + + at91rm9200_EmacEnableMDIO (p_mac); + + if (!dm9161_GetLinkSpeed (p_mac)) { + /* Try another time */ + ret = dm9161_GetLinkSpeed (p_mac); + } + + /* Disable PHY Interrupts */ + at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue); + /* clear FDX, SPD, Link, INTR masks */ + IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK | + DM9161_LINK_MASK | DM9161_INTR_MASK); + at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue); + at91rm9200_EmacDisableMDIO (p_mac); + + return (ret); +} + + +/* + * Name: + * dm9161_AutoNegotiate + * Description: + * MAC Autonegotiates with the partner status of same is set in the + * MAC configuration registers + * Arguments: + * dev - pointer to struct net_device + * Return value: + * TRUE - if link status set successfully + * FALSE - if link status not set + */ +static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status) +{ + unsigned short value; + unsigned short PhyAnar; + unsigned short PhyAnalpar; + + /* Set dm9161 control register */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + value &= ~DM9161_AUTONEG; /* remove autonegotiation enable */ + value |= DM9161_ISOLATE; /* Electrically isolate PHY */ + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + /* Set the Auto_negotiation Advertisement Register */ + /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */ + PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX | + DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar)) + return FALSE; + + /* Read the Control Register */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + /* Restart Auto_negotiation */ + value |= DM9161_RESTART_AUTONEG; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + /*check AutoNegotiate complete */ + udelay (10000); + at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value); + if (!(value & DM9161_AUTONEG_COMP)) + return FALSE; + + /* Get the AutoNeg Link partner base page */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar)) + return FALSE; + + if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) { + /*set MII for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + return TRUE; + } + + if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) { + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + return TRUE; + } + return FALSE; +} + + +/* + * Name: + * at91rm92000_GetPhyInterface + * Description: + * Initialise the interface functions to the PHY + * Arguments: + * None + * Return value: + * None + */ +void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops) +{ + p_phyops->Init = dm9161_InitPhy; + p_phyops->IsPhyConnected = dm9161_IsPhyConnected; + p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; + p_phyops->AutoNegotiate = dm9161_AutoNegotiate; +} + +#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c new file mode 100644 index 0000000000..5220fcf5d9 --- /dev/null +++ b/board/cmc_pu2/flash.c @@ -0,0 +1,507 @@ +/* + * (C) Copyright 2002 + * Lineo, Inc. + * Bernhard Kuhn + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +ulong myflush(void); + + +/* Flash Organization Structure */ +typedef struct OrgDef +{ + unsigned int sector_number; + unsigned int sector_size; +} OrgDef; + + +/* Flash Organizations */ +OrgDef OrgAT49BV16x4[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ + { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ +}; + +OrgDef OrgAT49BV16x4A[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ +}; + +OrgDef OrgAT49BV6416[] = +{ + { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ + { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ +}; + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/* AT49BV1614A Codes */ +#define FLASH_CODE1 0xAA +#define FLASH_CODE2 0x55 +#define ID_IN_CODE 0x90 +#define ID_OUT_CODE 0xF0 + + +#define CMD_READ_ARRAY 0x00F0 +#define CMD_UNLOCK1 0x00AA +#define CMD_UNLOCK2 0x0055 +#define CMD_ERASE_SETUP 0x0080 +#define CMD_ERASE_CONFIRM 0x0030 +#define CMD_PROGRAM 0x00A0 +#define CMD_UNLOCK_BYPASS 0x0020 +#define CMD_SECTOR_UNLOCK 0x0070 + +#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) +#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) + +#define BIT_ERASE_DONE 0x0080 +#define BIT_RDY_MASK 0x0080 +#define BIT_PROGRAM_ERROR 0x0020 +#define BIT_TIMEOUT 0x80000000 /* our flag */ + +#define READY 1 +#define ERR 2 +#define TMO 4 + +/*----------------------------------------------------------------------- + */ +void flash_identification (flash_info_t * info) +{ + volatile u16 manuf_code, device_code, add_device_code; + + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_IN_CODE; + + manuf_code = *(volatile u16 *) CFG_FLASH_BASE; + device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); + add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); + + MEM_FLASH_ADDR1 = FLASH_CODE1; + MEM_FLASH_ADDR2 = FLASH_CODE2; + MEM_FLASH_ADDR1 = ID_OUT_CODE; + + /* Vendor type */ + info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; + printf ("Atmel: "); + + if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { + + if ((add_device_code & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; + printf ("AT49BV1614A (16Mbit)\n"); + } else { /* AT49BV1614 Flash */ + info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; + printf ("AT49BV1614 (16Mbit)\n"); + } + + } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; + printf ("AT49BV6416 (64Mbit)\n"); + } +} + +ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) +{ + int i, nb_sectors = 0; + + for (i=0; istart[sector]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + *addr = CMD_SECTOR_UNLOCK; +} + + +ulong flash_init (void) +{ + int i, j, k; + unsigned int flash_nb_blocks, sector; + unsigned int start_address; + OrgDef *pOrgDef; + + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_identification (&flash_info[i]); + + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614 & FLASH_TYPEMASK)) { + + pOrgDef = OrgAT49BV16x4; + flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ + + pOrgDef = OrgAT49BV16x4A; + flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); + } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ + + pOrgDef = OrgAT49BV6416; + flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); + } else { + flash_nb_blocks = 0; + pOrgDef = OrgAT49BV16x4; + } + + flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); + memset (flash_info[i].protect, 0, flash_info[i].sector_count); + + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); + + sector = 0; + start_address = flashbase; + flash_info[i].size = 0; + + for (j = 0; j < flash_nb_blocks; j++) { + for (k = 0; k < pOrgDef[j].sector_number; k++) { + flash_info[i].start[sector++] = start_address; + start_address += pOrgDef[j].sector_size; + flash_info[i].size += pOrgDef[j].sector_size; + } + } + + size += flash_info[i].size; + + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ + + /* Unlock all sectors at reset */ + for (j=0; jflash_id & FLASH_VENDMASK) { + case (ATM_MANUFACT & FLASH_VENDMASK): + printf ("Atmel: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (ATM_ID_BV1614 & FLASH_TYPEMASK): + printf ("AT49BV1614 (16Mbit)\n"); + break; + case (ATM_ID_BV1614A & FLASH_TYPEMASK): + printf ("AT49BV1614A (16Mbit)\n"); + break; + case (ATM_ID_BV6416 & FLASH_TYPEMASK): + printf ("AT49BV6416 (64Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + +Done: ; +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + ulong result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip1; + + /* first look for protection bits */ + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; + } + + if ((info->flash_id & FLASH_VENDMASK) != + (ATM_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + volatile u16 *addr = (volatile u16 *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip1 = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip1 = TMO; + break; + } + + if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) + chip1 = READY; + + } while (!chip1); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip1 == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip1 == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + printf ("ok.\n"); + } else { /* it was protected */ + printf ("protected!\n"); + } + } + + if (ctrlc ()) + printf ("User Interrupt!\n"); + +outahere: + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rc; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash + */ + +volatile static int write_word (flash_info_t * info, ulong dest, + ulong data) +{ + volatile u16 *addr = (volatile u16 *) dest; + ulong result; + int rc = ERR_OK; + int cflag, iflag; + int chip1; + + /* + * Check if Flash is (sufficiently) erased + */ + result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait until flash is ready */ + chip1 = 0; + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip1 = ERR | TMO; + break; + } + if (!chip1 && ((result & 0x80) == (data & 0x80))) + chip1 = READY; + + } while (!chip1); + + *addr = CMD_READ_ARRAY; + + if (chip1 == ERR || *addr != data) + rc = ERR_PROG_ERROR; + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rc; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong wp, data; + int rc; + + if (addr & 1) { + printf ("unaligned destination not supported\n"); + return ERR_ALIGN; + }; + + if ((int) src & 1) { + printf ("unaligned source not supported\n"); + return ERR_ALIGN; + }; + + wp = addr; + + while (cnt >= 2) { + data = *((volatile u16 *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; + } + + if (cnt == 1) { + data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << + 8); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 1; + wp += 1; + cnt -= 1; + }; + + return ERR_OK; +} diff --git a/board/cmc_pu2/memsetup.S b/board/cmc_pu2/memsetup.S new file mode 100644 index 0000000000..168cd6bd83 --- /dev/null +++ b/board/cmc_pu2/memsetup.S @@ -0,0 +1,200 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the at91rm9200dk board by + * (C) Copyright 2004 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#ifdef CONFIG_BOOTBINFUNC +/* + * some parameters for the board + * + * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in + * turn is based on the boot.bin code from ATMMEL + * + */ + +/* flash */ +#define MC_PUIA 0xFFFFFF10 +#define MC_PUIA_VAL 0x00000000 +#define MC_PUP 0xFFFFFF50 +#define MC_PUP_VAL 0x00000000 +#define MC_PUER 0xFFFFFF54 +#define MC_PUER_VAL 0x00000000 +#define MC_ASR 0xFFFFFF04 +#define MC_ASR_VAL 0x00000000 +#define MC_AASR 0xFFFFFF08 +#define MC_AASR_VAL 0x00000000 +#define EBI_CFGR 0xFFFFFF64 +#define EBI_CFGR_VAL 0x00000000 +#define SMC2_CSR 0xFFFFFF70 +#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define PLLAR 0xFFFFFC28 +#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define PLLBR 0xFFFFFC2C +#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define MCKR 0xFFFFFC30 +#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ + +/* sdram */ +#define PIOC_ASR 0xFFFFF870 +#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define PIOC_BSR 0xFFFFF804 +#define PIOC_BSR_VAL 0x00000000 +#define PIOC_PDR 0xFFFFF804 +#define PIOC_PDR_VAL 0xFFFF0000 +#define EBI_CSA 0xFFFFFF60 +#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ +#define SDRC_CR 0xFFFFFF98 +#define SDRC_CR_VAL 0x2188c155 +#define SDRAM 0x20000000 /* address of the SDRAM */ +#define SDRAM1 0x20000080 /* address of the SDRAM */ +#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ +#define SDRC_MR 0xFFFFFF90 +#define SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define SDRC_MR_VAL1 0x00000004 /* refresh */ +#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define SDRC_TR 0xFFFFFF94 +#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ + + +_TEXT_BASE: + .word TEXT_BASE + +.globl memsetup +memsetup: + /* memory control configuration */ + /* this isn't very elegant, but what the heck */ + ldr r0, =SMRDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + add r2, r0, #80 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + /* delay - this is all done by guess */ + ldr r0, =0x00001000 +1: + subs r0, r0, #1 + bhi 1b + ldr r0, =SMRDATA1 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + add r2, r0, #176 +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word MC_PUIA + .word MC_PUIA_VAL + .word MC_PUP + .word MC_PUP_VAL + .word MC_PUER + .word MC_PUER_VAL + .word MC_ASR + .word MC_ASR_VAL + .word MC_AASR + .word MC_AASR_VAL + .word EBI_CFGR + .word EBI_CFGR_VAL + .word SMC2_CSR + .word SMC2_CSR_VAL + .word PLLAR + .word PLLAR_VAL + .word PLLBR + .word PLLBR_VAL + .word MCKR + .word MCKR_VAL + /* SMRDATA is 80 bytes long */ + /* here there's a delay of 100 */ +SMRDATA1: + .word PIOC_ASR + .word PIOC_ASR_VAL + .word PIOC_BSR + .word PIOC_BSR_VAL + .word PIOC_PDR + .word PIOC_PDR_VAL + .word EBI_CSA + .word EBI_CSA_VAL + .word SDRC_CR + .word SDRC_CR_VAL + .word SDRC_MR + .word SDRC_MR_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRC_MR + .word SDRC_MR_VAL1 + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRC_MR + .word SDRC_MR_VAL2 + .word SDRAM1 + .word SDRAM_VAL + .word SDRC_TR + .word SDRC_TR_VAL + .word SDRAM + .word SDRAM_VAL + .word SDRC_MR + .word SDRC_MR_VAL3 + .word SDRAM + .word SDRAM_VAL + /* SMRDATA1 is 176 bytes long */ +#endif /* CONFIG_BOOTBINFUNC */ diff --git a/board/cmc_pu2/u-boot.lds b/board/cmc_pu2/u-boot.lds new file mode 100644 index 0000000000..0282898d71 --- /dev/null +++ b/board/cmc_pu2/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/at91rm9200/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/at91rm9200/Makefile b/cpu/at91rm9200/Makefile index dfe50c0b0a..b7a30c93b2 100644 --- a/cpu/at91rm9200/Makefile +++ b/cpu/at91rm9200/Makefile @@ -27,7 +27,7 @@ LIB = lib$(CPU).a START = start.o OBJS = serial.o interrupts.o cpu.o \ - at91rm9200_ether.o + at91rm9200_ether.o i2c.o all: .depend $(START) $(LIB) diff --git a/cpu/at91rm9200/cpu.c b/cpu/at91rm9200/cpu.c index c006d9c7e6..a7e2ca9165 100644 --- a/cpu/at91rm9200/cpu.c +++ b/cpu/at91rm9200/cpu.c @@ -35,8 +35,8 @@ #include #include -#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART1) -#error must define one of CONFIG_DBGU or CONFIG_USART1 +#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART0) && !defined(CONFIG_USART1) +#error must define one of CONFIG_DBGU or CONFIG_USART0 or CONFIG_USART1 #endif /* read co-processor 15, register #1 (control register) */ @@ -123,6 +123,9 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifdef CONFIG_DBGU AT91PS_USART us = AT91C_BASE_DBGU; #endif +#ifdef CONFIG_USART0 + AT91PS_USART us = AT91C_BASE_US0; +#endif #ifdef CONFIG_USART1 AT91PS_USART us = AT91C_BASE_US1; #endif diff --git a/cpu/at91rm9200/i2c.c b/cpu/at91rm9200/i2c.c new file mode 100644 index 0000000000..d5d6268dbc --- /dev/null +++ b/cpu/at91rm9200/i2c.c @@ -0,0 +1,192 @@ +/* + * i2c Support for Atmel's AT91RM9200 Two-Wire Interface + * + * (c) Rick Bronson + * + * Borrowed heavily from original work by: + * Copyright (c) 2000 Philip Edelbrock + * + * Modified to work with u-boot by (C) 2004 Gary Jennejohn garyj@denx.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ +#include + +#ifdef CONFIG_HARD_I2C + +#include +#include +#include + +#include + +static int debug = 0; + +/* + * Poll the i2c status register until the specified bit is set. + * Returns 0 if timed out (100 msec) + */ +static short at91_poll_status(AT91PS_TWI twi, unsigned long bit) { + int loop_cntr = 10000; + do { + udelay(100); + } while (!(twi->TWI_SR & bit) && (--loop_cntr > 0)); + + return (loop_cntr > 0); +} + +/* + * Generic i2c master transfer entrypoint + * + * rw == 1 means that this is a read + */ +static int +at91_xfer(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len, int rw) +{ + AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE; + int length; + unsigned char *buf; + + /* Set the TWI Master Mode Register */ + twi->TWI_MMR = (chip << 16) | (alen << 8) + | ((rw == 1) ? AT91C_TWI_MREAD : 0); + + /* Set TWI Internal Address Register with first messages data field */ + /* only one address byte is supported */ + if (alen > 0) + twi->TWI_IADR = addr & 0xff; + + length = len; + buf = buffer; + if (length && buf) { /* sanity check */ + if (rw) { + twi->TWI_CR = AT91C_TWI_START; + while (length--) { + if (!length) + twi->TWI_CR = AT91C_TWI_STOP; + /* Wait until transfer is finished */ + if (!at91_poll_status(twi, AT91C_TWI_RXRDY)) { + if (debug) + printf("at91_i2c: timeout 1\n"); + return 1; + } + *buf++ = twi->TWI_RHR; + } + if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) { + if (debug) + printf("at91_i2c: timeout 2\n"); + return 1; + } + } else { + twi->TWI_CR = AT91C_TWI_START; + while (length--) { + twi->TWI_THR = *buf++; + if (!length) + twi->TWI_CR = AT91C_TWI_STOP; + if (!at91_poll_status(twi, AT91C_TWI_TXRDY)) { + if (debug) + printf("at91_i2c: timeout 3\n"); + return 1; + } + } + /* Wait until transfer is finished */ + if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) { + if (debug) + printf("at91_i2c: timeout 4\n"); + return 1; + } + } + } + return 0; +} + +int +i2c_probe(unsigned char chip) +{ + char buffer[1]; + + return at91_xfer(chip, 0, 0, buffer, 1, 1); +} + +int +i2c_read(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len) +{ + /* we only allow one address byte */ + if (alen > 1) + return 1; +#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW + /* XXX assume an ATMEL AT24C16 */ + if (alen == 1) { + chip |= (addr >> 8) & 0xff; + addr = addr & 0xff; + } +#endif + return at91_xfer(chip, addr, alen, buffer, len, 1); +} + +int +i2c_write(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len) +{ + int i; + unsigned char *buf; + + /* we only allow one address byte */ + if (alen > 1) + return 1; +#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW + /* XXX assume an ATMEL AT24C16 */ + if (alen == 1) { + buf = buffer; + /* do single byte writes */ + for (i = 0; i < len; i++) { + chip |= (addr >> 8) & 0xff; + addr = addr & 0xff; + if (at91_xfer(chip, addr, alen, buf++, 1, 0)) + return 1; + } + } + return 0; +#endif + return at91_xfer(chip, addr, alen, buffer, len, 0); +} + +/* + * Main initialization routine + */ +void +i2c_init(int speed, int slaveaddr) +{ + AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE; + + *AT91C_PIOA_PDR = AT91C_PA25_TWD | AT91C_PA26_TWCK; + *AT91C_PIOA_ASR = AT91C_PA25_TWD | AT91C_PA26_TWCK; + *AT91C_PIOA_MDER = AT91C_PA25_TWD | AT91C_PA26_TWCK; + *AT91C_PMC_PCER = 1 << AT91C_ID_TWI; /* enable peripheral clock */ + + twi->TWI_IDR = 0x3ff; /* Disable all interrupts */ + twi->TWI_CR = AT91C_TWI_SWRST; /* Reset peripheral */ + twi->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; /* Set Master mode */ + + /* Here, CKDIV = 1 and CHDIV=CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */ + twi->TWI_CWGR = AT91C_TWI_CKDIV1 | AT91C_TWI_CLDIV3 | (AT91C_TWI_CLDIV3 << 8); + + printf("Found AT91 i2c\n"); + return; +} +#endif /* CONFIG_HARD_I2C */ diff --git a/cpu/at91rm9200/serial.c b/cpu/at91rm9200/serial.c index c16c9d4f0f..fb038510c4 100644 --- a/cpu/at91rm9200/serial.c +++ b/cpu/at91rm9200/serial.c @@ -33,14 +33,17 @@ #include #include -#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART1) -#error must define one of CONFIG_DBGU or CONFIG_USART1 +#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART0) && !defined(CONFIG_USART1) +#error must define one of CONFIG_DBGU or CONFIG_USART0 or CONFIG_USART1 #endif /* ggi thunder */ #ifdef CONFIG_DBGU AT91PS_USART us = (AT91PS_USART) AT91C_BASE_DBGU; #endif +#ifdef CONFIG_USART0 +AT91PS_USART us = (AT91PS_USART) AT91C_BASE_US0; +#endif #ifdef CONFIG_USART1 AT91PS_USART us = (AT91PS_USART) AT91C_BASE_US1; #endif @@ -50,9 +53,19 @@ void serial_setbrg (void) DECLARE_GLOBAL_DATA_PTR; int baudrate; - if ((baudrate = gd->bd->bi_baudrate) <= 0) + if ((baudrate = gd->baudrate) <= 0) baudrate = CONFIG_BAUDRATE; - us->US_BRGR = CFG_AT91C_BRGR_DIVISOR; /* hardcode so no __divsi3 */ + if (baudrate == CONFIG_BAUDRATE) { + us->US_BRGR = CFG_AT91C_BRGR_DIVISOR; /* hardcode so no __divsi3 */ + } else { +#if 0 + /* 33 -> 115200 */ + us->US_BRGR = 33 * (115200/baudrate); +#else + /* MASTER_CLOCK/(16 * baudrate) */ + us->US_BRGR = (AT91C_MASTER_CLOCK >> 4)/baudrate; +#endif + } } int serial_init (void) @@ -62,6 +75,10 @@ int serial_init (void) *AT91C_PIOA_PDR = AT91C_PA31_DTXD | AT91C_PA30_DRXD; /* PA 31 & 30 */ *AT91C_PMC_PCER = 1 << AT91C_ID_SYS; /* enable clock */ #endif +#ifdef CONFIG_USART0 + *AT91C_PIOA_PDR = AT91C_PA17_TXD0 | AT91C_PA18_RXD0; + *AT91C_PMC_PCER |= 1 << AT91C_ID_USART0; /* enable clock */ +#endif #ifdef CONFIG_USART1 *AT91C_PIOB_PDR = AT91C_PB21_TXD1 | AT91C_PB20_RXD1; *AT91C_PMC_PCER |= 1 << AT91C_ID_USART1; /* enable clock */ diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 463f462644..869c4e20b4 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -446,7 +446,35 @@ typedef struct _AT91S_PDC { /* ========== Register definition ==================================== */ #define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) /* (SPI) Chip Select Register */ #define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */ +#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) /* (PIOA) PIO Enable Register */ #define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) /* (PIOA) PIO Disable Register */ +#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) /* (PIOA) PIO Status Register */ +#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) /* (PIOA) PIO Output Enable Register */ +#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) /* (PIOA) PIO Output Disable Register */ +#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) /* (PIOA) PIO Output Status Register */ +#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) /* (PIOA) PIO Glitch Input Filter Enable Register */ +#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) /* (PIOA) PIO Glitch Input Filter Disable Register */ +#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) /* (PIOA) PIO Glitch Input Filter Status Register */ +#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) /* (PIOA) PIO Set Output Data Register */ +#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) /* (PIOA) PIO Clear Output Data Register */ +#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) /* (PIOA) PIO Output Data Status Register */ +#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) /* (PIOA) PIO Pin Data Status Register */ +#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) /* (PIOA) PIO Interrupt Enable Register */ +#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) /* (PIOA) PIO Interrupt Disable Register */ +#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) /* (PIOA) PIO Interrupt Mask Register */ +#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) /* (PIOA) PIO Interrupt Status Register */ +#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) /* (PIOA) PIO Multi-drive Enable Register */ +#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) /* (PIOA) PIO Multi-drive Disable Register */ +#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) /* (PIOA) PIO Multi-drive Status Register */ +#define AT91C_PIOA_PUDR ((AT91_REG *) 0xFFFFF460) /* (PIOA) PIO Pull-up Disable Register */ +#define AT91C_PIOA_PUER ((AT91_REG *) 0xFFFFF464) /* (PIOA) PIO Pull-up Enable Register */ +#define AT91C_PIOA_PUSR ((AT91_REG *) 0xFFFFF468) /* (PIOA) PIO Pull-up Status Register */ +#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) /* (PIOA) PIO Peripheral A Select Register */ +#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) /* (PIOA) PIO Peripheral B Select Register */ +#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) /* (PIOA) PIO Peripheral AB Select Register */ +#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) /* (PIOA) PIO Output Write Enable Register */ +#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) /* (PIOA) PIO Output Write Disable Register */ +#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) /* (PIOA) PIO Output Write Status Register */ #define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */ #define AT91C_PIO_PA30 ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */ @@ -454,19 +482,28 @@ typedef struct _AT91S_PDC { #define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) /* Burst Flash Clock */ #define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) /* DBGU Debug Receive Data */ #define AT91C_PIO_PA31 ((unsigned int) 1 << 31) /* Pin Controlled by PA31 */ +#define AT91C_PA25_TWD ((unsigned int) 1 << 25) +#define AT91C_PA26_TWCK ((unsigned int) 1 << 26) #define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) /* DBGU Debug Transmit Data */ +#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) /* Pin Controlled by PA17 */ +#define AT91C_PA17_TXD0 AT91C_PIO_PA17 /* USART0 Transmit Data */ +#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) /* Pin Controlled by PA18 */ +#define AT91C_PA18_RXD0 AT91C_PIO_PA18 /* USART0 Receive Data */ #define AT91C_PIO_PB20 ((unsigned int) 1 << 20) /* Pin Controlled by PB20 */ -#define AT91C_PB20_RXD1 ((unsigned int) AT91C_PIO_PB20) /* USART1 Receive Data */ +#define AT91C_PB20_RXD1 AT91C_PIO_PB20 /* USART1 Receive Data */ #define AT91C_PIO_PB21 ((unsigned int) 1 << 21) /* Pin Controlled by PB21 */ -#define AT91C_PB21_TXD1 ((unsigned int) AT91C_PIO_PB21) /* USART1 Transmit Data */ - -#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */ +#define AT91C_PB21_TXD1 AT91C_PIO_PB21 /* USART1 Transmit Data */ + +#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */ +#define AT91C_ID_PIOA ((unsigned int) 2) /* PIO port A */ +#define AT91C_ID_PIOB ((unsigned int) 3) /* PIO port B */ +#define AT91C_ID_PIOC ((unsigned int) 4) /* PIO port C */ +#define AT91C_ID_USART0 ((unsigned int) 6) /* USART 0 */ +#define AT91C_ID_USART1 ((unsigned int) 7) /* USART 1 */ +#define AT91C_ID_TWI ((unsigned int) 12) /* Two Wire Interface */ +#define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */ #define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */ #define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */ -#define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */ -#define AT91C_ID_PIOB ((unsigned int) 3) -#define AT91C_ID_PIOC ((unsigned int) 4) -#define AT91C_ID_USART1 ((unsigned int) 7) #define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */ #define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */ @@ -561,11 +598,14 @@ typedef struct _AT91S_PDC { #define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */ #define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */ #define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */ -#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */ +#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */ +#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) /* (CKGR) Base Address */ +#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */ #define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */ #define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */ #define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */ #define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */ +#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */ #define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */ #define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */ #define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */ diff --git a/include/at91rm9200_i2c.h b/include/at91rm9200_i2c.h new file mode 100644 index 0000000000..cb13d9d4d0 --- /dev/null +++ b/include/at91rm9200_i2c.h @@ -0,0 +1,126 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// The software is delivered "AS IS" without warranty or condition of any +// kind, either express, implied or statutory. This includes without +// limitation any warranty or condition with respect to merchantability or +// fitness for any particular purpose, or against the infringements of +// intellectual property rights of others. +// ---------------------------------------------------------------------------- +// File Name : at91rm9200_i2c.h +// Object : AT91RM9200 / TWI definitions +// Generated : AT91 SW Application Group 12/03/2002 (10:48:02) +// +// ---------------------------------------------------------------------------- + +#ifndef AT91RM9200_TWI_H +#define AT91RM9200_TWI_H + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Two-wire Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ + +typedef struct _AT91S_TWI { + AT91_REG TWI_CR; // Control Register + AT91_REG TWI_MMR; // Master Mode Register + AT91_REG TWI_SMR; // Slave Mode Register + AT91_REG TWI_IADR; // Internal Address Register + AT91_REG TWI_CWGR; // Clock Waveform Generator Register + AT91_REG Reserved0[3]; // + AT91_REG TWI_SR; // Status Register + AT91_REG TWI_IER; // Interrupt Enable Register + AT91_REG TWI_IDR; // Interrupt Disable Register + AT91_REG TWI_IMR; // Interrupt Mask Register + AT91_REG TWI_RHR; // Receive Holding Register + AT91_REG TWI_THR; // Transmit Holding Register + AT91_REG Reserved1[50]; // + AT91_REG TWI_RPR; // Receive Pointer Register + AT91_REG TWI_RCR; // Receive Counter Register + AT91_REG TWI_TPR; // Transmit Pointer Register + AT91_REG TWI_TCR; // Transmit Counter Register + AT91_REG TWI_RNPR; // Receive Next Pointer Register + AT91_REG TWI_RNCR; // Receive Next Counter Register + AT91_REG TWI_TNPR; // Transmit Next Pointer Register + AT91_REG TWI_TNCR; // Transmit Next Counter Register + AT91_REG TWI_PTCR; // PDC Transfer Control Register + AT91_REG TWI_PTSR; // PDC Transfer Status Register +} AT91S_TWI, *AT91PS_TWI; + +#endif + +// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +#define AT91C_TWI_START ( 0x1 << 0) // (TWI) Send a START Condition +#define AT91C_TWI_STOP ( 0x1 << 1) // (TWI) Send a STOP Condition +#define AT91C_TWI_MSEN ( 0x1 << 2) // (TWI) TWI Master Transfer Enabled +#define AT91C_TWI_MSDIS ( 0x1 << 3) // (TWI) TWI Master Transfer Disabled +#define AT91C_TWI_SVEN ( 0x1 << 4) // (TWI) TWI Slave Transfer Enabled +#define AT91C_TWI_SVDIS ( 0x1 << 5) // (TWI) TWI Slave Transfer Disabled +#define AT91C_TWI_SWRST ( 0x1 << 7) // (TWI) Software Reset +// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +#define AT91C_TWI_IADRSZ ( 0x3 << 8) // (TWI) Internal Device Address Size +#define AT91C_TWI_IADRSZ_NO ( 0x0 << 8) // (TWI) No internal device address +#define AT91C_TWI_IADRSZ_1_BYTE ( 0x1 << 8) // (TWI) One-byte internal device address +#define AT91C_TWI_IADRSZ_2_BYTE ( 0x2 << 8) // (TWI) Two-byte internal device address +#define AT91C_TWI_IADRSZ_3_BYTE ( 0x3 << 8) // (TWI) Three-byte internal device address +#define AT91C_TWI_MREAD ( 0x1 << 12) // (TWI) Master Read Direction +#define AT91C_TWI_DADR ( 0x7F << 6) // (TWI) Device Address +// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- +#define AT91C_TWI_SADR ( 0x7F << 16) // (TWI) Slave Device Address +// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +#define AT91C_TWI_CLDIV ( 0xFF << 0) // (TWI) Clock Low Divider +#define AT91C_TWI_CHDIV ( 0xFF << 8) // (TWI) Clock High Divider +#define AT91C_TWI_CKDIV ( 0x7 << 16) // (TWI) Clock Divider +// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +#define AT91C_TWI_TXCOMP ( 0x1 << 0) // (TWI) Transmission Completed +#define AT91C_TWI_RXRDY ( 0x1 << 1) // (TWI) Receive holding register ReaDY +#define AT91C_TWI_TXRDY ( 0x1 << 2) // (TWI) Transmit holding register ReaDY +#define AT91C_TWI_SVREAD ( 0x1 << 3) // (TWI) Slave Read +#define AT91C_TWI_SVACC ( 0x1 << 4) // (TWI) Slave Access +#define AT91C_TWI_GCACC ( 0x1 << 5) // (TWI) General Call Access +#define AT91C_TWI_OVRE ( 0x1 << 6) // (TWI) Overrun Error +#define AT91C_TWI_UNRE ( 0x1 << 7) // (TWI) Underrun Error +#define AT91C_TWI_NACK ( 0x1 << 8) // (TWI) Not Acknowledged +#define AT91C_TWI_ARBLST ( 0x1 << 9) // (TWI) Arbitration Lost +// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +/* + i2c Support for Atmel's AT91RM9200 Two-Wire Interface + + (c) Rick Bronson + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef AT91_I2C_H +#define AT91_I2C_H + +#define AT91C_TWI_CLOCK 100000 +#define AT91C_TWI_SCLOCK (10 * AT91C_MASTER_CLOCK / AT91C_TWI_CLOCK) +#define AT91C_TWI_CKDIV1 (2 << 16) /* TWI clock divider. NOTE: see Errata #22 */ + +#if (AT91C_TWI_SCLOCK % 10) >= 5 +#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 5) +#else +#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 6) +#endif +#define AT91C_TWI_CLDIV3 ((AT91C_TWI_CLDIV2 + (4 - AT91C_TWI_CLDIV2 % 4)) >> 2) + +#define AT91C_EEPROM_I2C_ADDRESS (0x50 << 16) + +#endif +#endif diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h new file mode 100644 index 0000000000..03f5dde8e4 --- /dev/null +++ b/include/configs/cmc_pu2.h @@ -0,0 +1,225 @@ +/* + * Rick Bronson + * + * Configuation settings for the AT91RM9200DK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ +/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ +#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* define this to include the functionality of boot.bin in u-boot */ +#undef CONFIG_BOOTBINFUNC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +#define CONFIG_BAUDRATE 9600 + +#define CFG_AT91C_BRGR_DIVISOR 390 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */ + +/* + * Hardware drivers + */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#undef CONFIG_DBGU +#undef CONFIG_USART0 +#define CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C +#define CFG_I2C_SPEED 0 /* not used */ +#define CFG_I2C_SLAVE 0 /* not used */ +#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ +#define CFG_I2C_RTC_ADDR 0x32 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_I2C_EEPROM_ADDR_OVERFLOW +#endif + +#define CONFIG_BOOTDELAY 3 +/* #define CONFIG_ENV_OVERWRITE 1 */ + +#ifdef CONFIG_HARD_I2C +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_I2C | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DHCP ) & \ + ~(CFG_CMD_BDI | \ + CFG_CMD_IMI | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC | \ + CFG_CMD_LOADS )) +#else +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_DHCP ) & \ + ~(CFG_CMD_BDI | \ + CFG_CMD_IMI | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC | \ + CFG_CMD_LOADS )) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ +#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ + +#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) +#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) + +#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) + +#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) +#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) +#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) +#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +/* the following are NOP's in our implementation */ +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 + +#define CONFIG_DRIVER_ETHER +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_AT91C_USE_RMII + +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ +#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ + +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#undef CFG_ENV_IS_IN_DATAFLASH + +#ifdef CFG_ENV_IS_IN_DATAFLASH +#define CFG_ENV_OFFSET 0x20000 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */ +#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#endif + + +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ +#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) +#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ + +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#ifndef __ASSEMBLY__ +/*----------------------------------------------------------------------- + * Board specific extension for bd_info + * + * This structure is embedded in the global bd_info (bd_t) structure + * and can be used by the board specific code (eg board/...) + */ + +struct bd_info_ext { + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; +}; +#endif + +#define CFG_HZ AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif