From: Rob Landley Date: Fri, 17 Feb 2006 05:12:03 +0000 (-0000) Subject: The tendency of vi to auto-indent can be really annoying at times. X-Git-Tag: 1_1_0~204 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2c98c40ec881dcaac93b069525314bc078359175;p=oweals%2Fbusybox.git The tendency of vi to auto-indent can be really annoying at times. --- diff --git a/archival/libunarchive/decompress_bunzip2.c b/archival/libunarchive/decompress_bunzip2.c index 8694a32cd..34afd6f99 100644 --- a/archival/libunarchive/decompress_bunzip2.c +++ b/archival/libunarchive/decompress_bunzip2.c @@ -71,7 +71,7 @@ struct group_data { typedef struct { /* State for interrupting output loop */ - + int writeCopies,writePos,writeRunCountdown,writeCount,writeCurrent; /* I/O tracking data (file handles, buffers, positions, etc.) */ @@ -154,34 +154,34 @@ static int get_next_block(bunzip_data *bd) dbuf=bd->dbuf; dbufSize=bd->dbufSize; selectors=bd->selectors; - + /* Reset longjmp I/O error handling */ - + i=setjmp(bd->jmpbuf); if(i) return i; - + /* Read in header signature and CRC, then validate signature. (last block signature means CRC is for whole file, return now) */ - + i = get_bits(bd,24); j = get_bits(bd,24); bd->headerCRC=get_bits(bd,32); if ((i == 0x177245) && (j == 0x385090)) return RETVAL_LAST_BLOCK; if ((i != 0x314159) || (j != 0x265359)) return RETVAL_NOT_BZIP_DATA; - + /* We can add support for blockRandomised if anybody complains. There was some code for this in busybox 1.0.0-pre3, but nobody ever noticed that it didn't actually work. */ - + if(get_bits(bd,1)) return RETVAL_OBSOLETE_INPUT; if((origPtr=get_bits(bd,24)) > dbufSize) return RETVAL_DATA_ERROR; - + /* mapping table: if some byte values are never used (encoding things like ascii text), the compression code removes the gaps to have fewer symbols to deal with, and writes a sparse bitfield indicating which values were present. We make a translation table to convert the symbols back to the corresponding bytes. */ - + t=get_bits(bd, 16); symTotal=0; for (i=0;i<16;i++) { @@ -191,81 +191,81 @@ static int get_next_block(bunzip_data *bd) if(k&(1<<(15-j))) symToByte[symTotal++]=(16*i)+j; } } - + /* How many different Huffman coding groups does this block use? */ - + groupCount=get_bits(bd,3); if (groupCount<2 || groupCount>MAX_GROUPS) return RETVAL_DATA_ERROR; - + /* nSelectors: Every GROUP_SIZE many symbols we select a new Huffman coding group. Read in the group selector list, which is stored as MTF encoded bit runs. (MTF=Move To Front, as each value is used it's moved to the start of the list.) */ - + if(!(nSelectors=get_bits(bd, 15))) return RETVAL_DATA_ERROR; for(i=0; i=groupCount) return RETVAL_DATA_ERROR; - + /* Decode MTF to get the next selector */ - + uc = mtfSymbol[j]; for(;j;j--) mtfSymbol[j] = mtfSymbol[j-1]; mtfSymbol[0]=selectors[i]=uc; } - + /* Read the Huffman coding tables for each group, which code for symTotal literal symbols, plus two run symbols (RUNA, RUNB) */ - + symCount=symTotal+2; for (j=0; j (MAX_HUFCODE_BITS-1)) return RETVAL_DATA_ERROR; - + /* If first bit is 0, stop. Else second bit indicates whether to increment or decrement the value. Optimization: grab 2 bits and unget the second if the first was 0. */ - + k = get_bits(bd,2); if (k < 2) { bd->inbufBitCount++; break; } - + /* Add one if second bit 1, else subtract 1. Avoids if/else */ - + t+=(((k+1)&2)-1); } - + /* Correct for the initial -1, to get the final symbol length */ - + length[i]=t+1; } - + /* Find largest and smallest lengths in this group */ - + minLen=maxLen=length[0]; for(i = 1; i < symCount; i++) { if(length[i] > maxLen) maxLen = length[i]; else if(length[i] < minLen) minLen = length[i]; } - + /* Calculate permute[], base[], and limit[] tables from length[]. * * permute[] is the lookup table for converting Huffman coded symbols @@ -276,47 +276,47 @@ static int get_next_block(bunzip_data *bd) * number of bits can have. This is how the Huffman codes can vary in * length: each code with a value>limit[length] needs another bit. */ - + hufGroup=bd->groups+j; hufGroup->minLen = minLen; hufGroup->maxLen = maxLen; - + /* Note that minLen can't be smaller than 1, so we adjust the base and limit array pointers so we're not always wasting the first entry. We do this again when using them (during symbol decoding).*/ - + base=hufGroup->base-1; limit=hufGroup->limit-1; - + /* Calculate permute[]. Concurently, initialize temp[] and limit[]. */ - + pp=0; for(i=minLen;i<=maxLen;i++) { temp[i]=limit[i]=0; for(t=0;tpermute[pp++] = t; } - + /* Count symbols coded for at each bit length */ - + for (i=0;ilimit[length] comparison. */ - + limit[i]= (pp << (maxLen - i)) - 1; pp<<=1; base[i+1]=pp-(t+=temp[i]); @@ -325,34 +325,34 @@ static int get_next_block(bunzip_data *bd) limit[maxLen]=pp+temp[maxLen]-1; base[minLen]=0; } - + /* We've finished reading and digesting the block header. Now read this block's Huffman coded symbols from the file and undo the Huffman coding and run length encoding, saving the result into dbuf[dbufCount++]=uc */ /* Initialize symbol occurrence counters and symbol Move To Front table */ - + for(i=0;i<256;i++) { byteCount[i] = 0; mtfSymbol[i]=(unsigned char)i; } - + /* Loop through compressed symbols. */ - + runPos=dbufCount=selector=0; for(;;) { - + /* fetch next Huffman coding group from list. */ - + symCount=GROUP_SIZE-1; if(selector>=nSelectors) return RETVAL_DATA_ERROR; hufGroup=bd->groups+selectors[selector++]; base=hufGroup->base-1; limit=hufGroup->limit-1; continue_this_group: - + /* Read next Huffman-coded symbol. */ - + /* Note: It is far cheaper to read maxLen bits and back up than it is to read minLen bits and then an additional bit at a time, testing as we go. Because there is a trailing last block (with file CRC), @@ -362,7 +362,7 @@ continue_this_group: dry). The following (up to got_huff_bits:) is equivalent to j=get_bits(bd,hufGroup->maxLen); */ - + while (bd->inbufBitCountmaxLen) { if(bd->inbufPos==bd->inbufCount) { j = get_bits(bd,hufGroup->maxLen); @@ -373,37 +373,37 @@ continue_this_group: }; bd->inbufBitCount-=hufGroup->maxLen; j = (bd->inbufBits>>bd->inbufBitCount)&((1<maxLen)-1); - + got_huff_bits: - + /* Figure how how many bits are in next symbol and unget extras */ - + i=hufGroup->minLen; while(j>limit[i]) ++i; bd->inbufBitCount += (hufGroup->maxLen - i); - + /* Huffman decode value to get nextSym (with bounds checking) */ - + if ((i > hufGroup->maxLen) || (((unsigned)(j=(j>>(hufGroup->maxLen-i))-base[i])) >= MAX_SYMBOLS)) return RETVAL_DATA_ERROR; nextSym = hufGroup->permute[j]; - + /* We have now decoded the symbol, which indicates either a new literal byte, or a repeated run of the most recent literal byte. First, check if nextSym indicates a repeated run, and if so loop collecting how many times to repeat the last literal. */ - + if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */ - + /* If this is the start of a new run, zero out counter */ - + if(!runPos) { runPos = 1; t = 0; } - + /* Neat trick that saves 1 symbol: instead of or-ing 0 or 1 at each bit position, add 1 or 2 instead. For example, 1011 is 1<<0 + 1<<1 + 2<<2. 1010 is 2<<0 + 2<<1 + 1<<2. @@ -411,17 +411,17 @@ got_huff_bits: the basic or 0/1 method (except all bits 0, which would use no symbols, but a run of length 0 doesn't mean anything in this context). Thus space is saved. */ - + t += (runPos << nextSym); /* +runPos if RUNA; +2*runPos if RUNB */ runPos <<= 1; goto end_of_huffman_loop; } - + /* When we hit the first non-run symbol after a run, we now know how many times to repeat the last literal, so append that many copies to our buffer of decoded symbols (dbuf) now. (The last literal used is the one at the head of the mtfSymbol array.) */ - + if(runPos) { runPos=0; if(dbufCount+t>=dbufSize) return RETVAL_DATA_ERROR; @@ -430,11 +430,11 @@ got_huff_bits: byteCount[uc] += t; while(t--) dbuf[dbufCount++]=uc; } - + /* Is this the terminating symbol? */ - + if(nextSym>symTotal) break; - + /* At this point, nextSym indicates a new literal character. Subtract one to get the position in the MTF array at which this literal is currently to be found. (Note that the result can't be -1 or 0, @@ -442,30 +442,30 @@ got_huff_bits: first symbol in the mtf array, position 0, would have been handled as part of a run above. Therefore 1 unused mtf position minus 2 non-literal nextSym values equals -1.) */ - + if(dbufCount>=dbufSize) return RETVAL_DATA_ERROR; i = nextSym - 1; uc = mtfSymbol[i]; - + /* Adjust the MTF array. Since we typically expect to move only a * small number of symbols, and are bound by 256 in any case, using * memmove here would typically be bigger and slower due to function * call overhead and other assorted setup costs. */ - + do { mtfSymbol[i] = mtfSymbol[i-1]; } while (--i); mtfSymbol[0] = uc; uc=symToByte[uc]; - + /* We have our literal byte. Save it into dbuf. */ - + byteCount[uc]++; dbuf[dbufCount++] = (unsigned int)uc; - + /* Skip group initialization if we're not done with this group. Done * this way to avoid compiler warning. */ - + end_of_huffman_loop: if(symCount--) goto continue_this_group; } @@ -476,7 +476,7 @@ end_of_huffman_loop: Now undo the Burrows-Wheeler transform on dbuf. See http://dogma.net/markn/articles/bwt/bwt.htm */ - + /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */ j=0; @@ -497,7 +497,7 @@ end_of_huffman_loop: /* Decode first byte by hand to initialize "previous" byte. Note that it doesn't get output, and if the first three characters are identical it doesn't qualify as a run (hence writeRunCountdown=5). */ - + if(dbufCount) { if(origPtr>=dbufCount) return RETVAL_DATA_ERROR; bd->writePos=dbuf[origPtr];