From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Date: Mon, 25 Jan 2016 06:38:45 +0000 (+0530)
Subject: armv8: lsch3: Enable WUO config for RNI-20 node
X-Git-Tag: v2016.05-rc1~230^2~22
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2b690b9837b4bb6d3598e4259581e399d078bff8;p=oweals%2Fu-boot.git

armv8: lsch3: Enable WUO config for RNI-20 node

Enable wuo config to accelerate coherent ordered writes for LS2080A
and LS2085A.

WRIOP IP is connected to RNI-20 Node.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 41e1704986..9c69ed13b4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -18,6 +18,14 @@ ENTRY(lowlevel_init)
 	mov	x29, lr			/* Save LR */
 
 #ifdef CONFIG_FSL_LSCH3
+
+	/* Set Wuo bit for RN-I 20 */
+#if defined(CONFIG_LS2085A) || defined (CONFIG_LS2080A)
+	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
+	ldr	x1, =0x00000010
+	bl	ccn504_set_aux
+#endif
+
 	/* Add fully-coherent masters to DVM domain */
 	ldr	x0, =CCI_MN_BASE
 	ldr	x1, =CCI_MN_RNF_NODEID_LIST
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 0ef7c9dd95..22f9c8fd65 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -91,6 +91,8 @@
 #define CCI_S1_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x110)
 #define CCI_S2_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x210)
 
+#define CCI_AUX_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x0500)
+
 /* TZ Protection Controller Definitions */
 #define TZPC_BASE				0x02200000
 #define TZPCR0SIZE_BASE				(TZPC_BASE)
diff --git a/arch/arm/lib/ccn504.S b/arch/arm/lib/ccn504.S
index 7570c7b231..1e07876166 100644
--- a/arch/arm/lib/ccn504.S
+++ b/arch/arm/lib/ccn504.S
@@ -59,3 +59,24 @@ ENTRY(ccn504_set_qos)
 	ret
 ENDPROC(ccn504_set_qos)
 
+/*************************************************************************
+ *
+ * void ccn504_set_aux(CCI_AUX_CONTROL_BASE, Value);
+ *
+ * Initialize AUX control settings
+ *
+ *************************************************************************/
+ENTRY(ccn504_set_aux)
+	/*
+	 * x0: CCI_AUX_CONTROL_BASE
+	 * x1: Value
+	 */
+
+	ldr	x9, [x0]
+	mov	x10, x1
+	orr	x9, x9, x10
+	str	x9, [x0]
+
+	ret
+ENDPROC(ccn504_set_aux)
+