From: Aneesh V Date: Thu, 21 Jul 2011 13:10:09 +0000 (-0400) Subject: omap4: add sdram init support X-Git-Tag: v2011.09-rc1~85^2~43 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2ae610f030c376323515321280352b3fe6278a0f;p=oweals%2Fu-boot.git omap4: add sdram init support Add support for the SDRAM controller (EMIF). Signed-off-by: Aneesh V Signed-off-by: Sandeep Paulraj --- diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index ac4b2a6119..e1ccd68192 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -29,7 +29,9 @@ SOBJS += lowlevel_init.o COBJS += board.o COBJS += clocks.o +COBJS += emif.o COBJS += mem.o +COBJS += sdram_elpida.o COBJS += sys_info.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 1c26a66b79..ca107f790f 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -189,7 +189,7 @@ void watchdog_init(void) * This is needed because the size of memory installed may be * different on different versions of the board */ -u32 sdram_size(void) +u32 omap4_sdram_size(void) { u32 section, i, total_size = 0, size, addr; for (i = 0; i < 4; i++) { @@ -215,8 +215,8 @@ u32 sdram_size(void) */ int dram_init(void) { - - gd->ram_size = sdram_size(); + sdram_init(); + gd->ram_size = omap4_sdram_size(); return 0; } diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c new file mode 100644 index 0000000000..b25c1ee8cd --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -0,0 +1,328 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, + * + * Aneesh V + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +static inline u32 emif_num(u32 base) +{ + if (base == OMAP44XX_EMIF1) + return 1; + else if (base == OMAP44XX_EMIF2) + return 2; + else + return 0; +} + +static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) +{ + u32 mr; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << OMAP44XX_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + if (omap_revision() == OMAP4430_ES2_0) + mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); + else + mr = readl(&emif->emif_lpddr2_mode_reg_data); + debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), + cs, mr_addr, mr); + return mr; +} + +static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << OMAP44XX_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + writel(mr_val, &emif->emif_lpddr2_mode_reg_data); +} + +void emif_reset_phy(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 iodft; + + iodft = readl(&emif->emif_iodft_tlgc); + iodft |= OMAP44XX_REG_RESET_PHY_MASK; + writel(iodft, &emif->emif_iodft_tlgc); +} + +static void do_lpddr2_init(u32 base, u32 cs) +{ + u32 mr_addr; + + /* Wait till device auto initialization is complete */ + while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) + ; + set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); + /* + * tZQINIT = 1 us + * Enough loops assuming a maximum of 2GHz + */ + sdelay(2000); + set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); + set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); + /* + * Enable refresh along with writing MR2 + * Encoding of RL in MR2 is (RL - 2) + */ + mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK; + set_mr(base, cs, mr_addr, RL_FINAL - 2); +} + +static void lpddr2_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Not NVM */ + clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK); + + /* + * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM + * when EMIF_SDRAM_CONFIG register is written + */ + setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK); + + /* + * Set the SDRAM_CONFIG and PHY_CTRL for the + * un-locked frequency & default RL + */ + writel(regs->sdram_config_init, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + + do_lpddr2_init(base, CS0); + if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK) + do_lpddr2_init(base, CS1); + + writel(regs->sdram_config, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + /* Enable refresh now */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK); + +} + +static void emif_update_timings(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); + if (omap_revision() == OMAP4430_ES1_0) { + /* ES1 bug EMIF should be in force idle during freq_update */ + writel(0, &emif->emif_pwr_mgmt_ctrl); + } else { + writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); + writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); + } + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + /* + * Workaround: + * In a specific situation, the OCP interface between the DMM and + * EMIF may hang. + * 1. A TILER port is used to perform 2D burst writes of + * width 1 and height 8 + * 2. ELLAn port is used to perform reads + * 3. All accesses are routed to the same EMIF controller + * + * Work around to avoid this issue REG_SYS_THRESH_MAX value should + * be kept higher than default 0x7. As per recommondation 0x0A will + * be used for better performance with REG_LL_THRESH_MAX = 0x00 + */ + if (omap_revision() == OMAP4430_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00, + &emif->emif_l3_config); + } +} + +static void do_sdram_init(u32 base) +{ + const struct emif_regs *regs; + u32 in_sdram, emif_nr; + + debug(">>do_sdram_init() %x\n", base); + + in_sdram = running_from_sdram(); + emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2; + + emif_get_reg_dump(emif_nr, ®s); + if (!regs) { + debug("EMIF: reg dump not provided\n"); + return; + } + + /* + * Initializing the LPDDR2 device can not happen from SDRAM. + * Changing the timing registers in EMIF can happen(going from one + * OPP to another) + */ + if (!in_sdram) + lpddr2_init(base, regs); + + /* Write to the shadow registers */ + emif_update_timings(base, regs); + + debug("<control_lpddr2io1_0); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_2); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_2); + + writel(CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1, CONTROL_EFUSE_2); +} + +static void emif_post_init_config(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 omap4_rev = omap_revision(); + + /* reset phy on ES2.0 */ + if (omap4_rev == OMAP4430_ES2_0) + emif_reset_phy(base); + + /* Put EMIF back in smart idle on ES1.0 */ + if (omap4_rev == OMAP4430_ES1_0) + writel(0x80000000, &emif->emif_pwr_mgmt_ctrl); +} + +static void dmm_init(u32 base) +{ + const struct dmm_lisa_map_regs *lisa_map_regs; + + emif_get_dmm_regs(&lisa_map_regs); + + struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)base; + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); +} + +/* + * SDRAM initialization: + * SDRAM initialization has two parts: + * 1. Configuring the SDRAM device + * 2. Update the AC timings related parameters in the EMIF module + * (1) should be done only once and should not be done while we are + * running from SDRAM. + * (2) can and should be done more than once if OPP changes. + * Particularly, this may be needed when we boot without SPL and + * and using Configuration Header(CH). ROM code supports only at 50% OPP + * at boot (low power boot). So u-boot has to switch to OPP100 and update + * the frequency. So, + * Doing (1) and (2) makes sense - first time initialization + * Doing (2) and not (1) makes sense - OPP change (when using CH) + * Doing (1) and not (2) doen't make sense + * See do_sdram_init() for the details + */ +void sdram_init(void) +{ + u32 in_sdram, size_prog, size_detect; + + debug(">>sdram_init()\n"); + + if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) + return; + + in_sdram = running_from_sdram(); + debug("in_sdram = %d\n", in_sdram); + + if (!in_sdram) { + sdram_init_pads(); + bypass_dpll(&prcm->cm_clkmode_dpll_core); + } + + do_sdram_init(OMAP44XX_EMIF1); + do_sdram_init(OMAP44XX_EMIF2); + + if (!in_sdram) { + dmm_init(OMAP44XX_DMM_LISA_MAP_BASE); + emif_post_init_config(OMAP44XX_EMIF1); + emif_post_init_config(OMAP44XX_EMIF2); + + } + + /* for the shadow registers to take effect */ + freq_update_core(); + + /* Do some testing after the init */ + if (!in_sdram) { + size_prog = omap4_sdram_size(); + size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + size_prog); + /* Compare with the size programmed */ + if (size_detect != size_prog) { + printf("SDRAM: identified size not same as expected" + " size identified: %x expected: %x\n", + size_detect, + size_prog); + } else + debug("get_ram_size() successful"); + } + + debug("< + * + * Aneesh V + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430 + * SDP and Panda. Since the parts used and geometry are identical for + * SDP and Panda for a given OMAP4 revision, this information is kept + * here instead of being in board directory. However the key functions + * exported are weakly linked so that they can be over-ridden in the board + * directory if there is a OMAP4 board in the future that uses a different + * memory device or geometry. + * + * For any new board with different memory devices over-ride one or more + * of the following functions as per the CONFIG flags you intend to enable: + * - emif_get_reg_dump() + * - emif_get_dmm_regs() + * - emif_get_device_details() + * - emif_get_device_timings() + */ + +static const struct emif_regs emif_regs_elpida_200_mhz_2cs = { + .sdram_config_init = 0x80000eb9, + .sdram_config = 0x80001ab9, + .ref_ctrl = 0x0000030c, + .sdram_tim1 = 0x08648311, + .sdram_tim2 = 0x101b06ca, + .sdram_tim3 = 0x0048a19f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3214, + .temp_alert_config = 0xd8016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff808 +}; + +static const struct emif_regs emif_regs_elpida_380_mhz_1cs = { + .sdram_config_init = 0x80000eb1, + .sdram_config = 0x80001ab1, + .ref_ctrl = 0x000005cd, + .sdram_tim1 = 0x10cb0622, + .sdram_tim2 = 0x20350d52, + .sdram_tim3 = 0x00b1431f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3214, + .temp_alert_config = 0x58016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + +const struct emif_regs emif_regs_elpida_400_mhz_2cs = { + .sdram_config_init = 0x80000eb9, + .sdram_config = 0x80001ab9, + .ref_ctrl = 0x00000618, + .sdram_tim1 = 0x10eb0662, + .sdram_tim2 = 0x20370dd2, + .sdram_tim3 = 0x00b1c33f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0xd00b3214, + .temp_alert_config = 0xd8016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; +const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80540300 +}; + +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + u32 omap4_rev = omap_revision(); + + /* Same devices and geometry on both EMIFs */ + if (omap4_rev == OMAP4430_ES1_0) + *regs = &emif_regs_elpida_380_mhz_1cs; + else if (omap4_rev == OMAP4430_ES2_0) + *regs = &emif_regs_elpida_200_mhz_2cs; + else + *regs = &emif_regs_elpida_400_mhz_2cs; +} +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + u32 omap_rev = omap_revision(); + + if (omap_rev == OMAP4430_ES1_0) + *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; + else + *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index 71db39c8c9..37bdceebed 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -33,10 +33,10 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4120) -#define CM_CLKMODE_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8140) -#define CM_CLKMODE_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4160) -#define CM_CLKSEL_CORE (OMAP44XX_L4_CORE_BASE + 0x4100) +#define CM_CLKMODE_DPLL_CORE 0x4A004120 +#define CM_CLKMODE_DPLL_PER 0x4A008140 +#define CM_CLKMODE_DPLL_MPU 0x4A004160 +#define CM_CLKSEL_CORE 0x4A004100 struct omap4_prcm_regs { /* cm1.ckgen */ diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h new file mode 100644 index 0000000000..09e9baa193 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/emif.h @@ -0,0 +1,1025 @@ +/* + * OMAP44xx EMIF header + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Aneesh V + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _EMIF_H_ +#define _EMIF_H_ +#include +#include + +/* Base address */ +#define OMAP44XX_EMIF1 0x4c000000 +#define OMAP44XX_EMIF2 0x4d000000 + +/* Registers shifts and masks */ + +/* EMIF_MOD_ID_REV */ +#define OMAP44XX_REG_SCHEME_SHIFT 30 +#define OMAP44XX_REG_SCHEME_MASK (0x3 << 30) +#define OMAP44XX_REG_MODULE_ID_SHIFT 16 +#define OMAP44XX_REG_MODULE_ID_MASK (0xfff << 16) +#define OMAP44XX_REG_RTL_VERSION_SHIFT 11 +#define OMAP44XX_REG_RTL_VERSION_MASK (0x1f << 11) +#define OMAP44XX_REG_MAJOR_REVISION_SHIFT 8 +#define OMAP44XX_REG_MAJOR_REVISION_MASK (0x7 << 8) +#define OMAP44XX_REG_MINOR_REVISION_SHIFT 0 +#define OMAP44XX_REG_MINOR_REVISION_MASK (0x3f << 0) + +/* STATUS */ +#define OMAP44XX_REG_BE_SHIFT 31 +#define OMAP44XX_REG_BE_MASK (1 << 31) +#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT 30 +#define OMAP44XX_REG_DUAL_CLK_MODE_MASK (1 << 30) +#define OMAP44XX_REG_FAST_INIT_SHIFT 29 +#define OMAP44XX_REG_FAST_INIT_MASK (1 << 29) +#define OMAP44XX_REG_PHY_DLL_READY_SHIFT 2 +#define OMAP44XX_REG_PHY_DLL_READY_MASK (1 << 2) + +/* SDRAM_CONFIG */ +#define OMAP44XX_REG_SDRAM_TYPE_SHIFT 29 +#define OMAP44XX_REG_SDRAM_TYPE_MASK (0x7 << 29) +#define OMAP44XX_REG_IBANK_POS_SHIFT 27 +#define OMAP44XX_REG_IBANK_POS_MASK (0x3 << 27) +#define OMAP44XX_REG_DDR_TERM_SHIFT 24 +#define OMAP44XX_REG_DDR_TERM_MASK (0x7 << 24) +#define OMAP44XX_REG_DDR2_DDQS_SHIFT 23 +#define OMAP44XX_REG_DDR2_DDQS_MASK (1 << 23) +#define OMAP44XX_REG_DYN_ODT_SHIFT 21 +#define OMAP44XX_REG_DYN_ODT_MASK (0x3 << 21) +#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT 20 +#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK (1 << 20) +#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT 18 +#define OMAP44XX_REG_SDRAM_DRIVE_MASK (0x3 << 18) +#define OMAP44XX_REG_CWL_SHIFT 16 +#define OMAP44XX_REG_CWL_MASK (0x3 << 16) +#define OMAP44XX_REG_NARROW_MODE_SHIFT 14 +#define OMAP44XX_REG_NARROW_MODE_MASK (0x3 << 14) +#define OMAP44XX_REG_CL_SHIFT 10 +#define OMAP44XX_REG_CL_MASK (0xf << 10) +#define OMAP44XX_REG_ROWSIZE_SHIFT 7 +#define OMAP44XX_REG_ROWSIZE_MASK (0x7 << 7) +#define OMAP44XX_REG_IBANK_SHIFT 4 +#define OMAP44XX_REG_IBANK_MASK (0x7 << 4) +#define OMAP44XX_REG_EBANK_SHIFT 3 +#define OMAP44XX_REG_EBANK_MASK (1 << 3) +#define OMAP44XX_REG_PAGESIZE_SHIFT 0 +#define OMAP44XX_REG_PAGESIZE_MASK (0x7 << 0) + +/* SDRAM_CONFIG_2 */ +#define OMAP44XX_REG_CS1NVMEN_SHIFT 30 +#define OMAP44XX_REG_CS1NVMEN_MASK (1 << 30) +#define OMAP44XX_REG_EBANK_POS_SHIFT 27 +#define OMAP44XX_REG_EBANK_POS_MASK (1 << 27) +#define OMAP44XX_REG_RDBNUM_SHIFT 4 +#define OMAP44XX_REG_RDBNUM_MASK (0x3 << 4) +#define OMAP44XX_REG_RDBSIZE_SHIFT 0 +#define OMAP44XX_REG_RDBSIZE_MASK (0x7 << 0) + +/* SDRAM_REF_CTRL */ +#define OMAP44XX_REG_INITREF_DIS_SHIFT 31 +#define OMAP44XX_REG_INITREF_DIS_MASK (1 << 31) +#define OMAP44XX_REG_SRT_SHIFT 29 +#define OMAP44XX_REG_SRT_MASK (1 << 29) +#define OMAP44XX_REG_ASR_SHIFT 28 +#define OMAP44XX_REG_ASR_MASK (1 << 28) +#define OMAP44XX_REG_PASR_SHIFT 24 +#define OMAP44XX_REG_PASR_MASK (0x7 << 24) +#define OMAP44XX_REG_REFRESH_RATE_SHIFT 0 +#define OMAP44XX_REG_REFRESH_RATE_MASK (0xffff << 0) + +/* SDRAM_REF_CTRL_SHDW */ +#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT 0 +#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0) + +/* SDRAM_TIM_1 */ +#define OMAP44XX_REG_T_RP_SHIFT 25 +#define OMAP44XX_REG_T_RP_MASK (0xf << 25) +#define OMAP44XX_REG_T_RCD_SHIFT 21 +#define OMAP44XX_REG_T_RCD_MASK (0xf << 21) +#define OMAP44XX_REG_T_WR_SHIFT 17 +#define OMAP44XX_REG_T_WR_MASK (0xf << 17) +#define OMAP44XX_REG_T_RAS_SHIFT 12 +#define OMAP44XX_REG_T_RAS_MASK (0x1f << 12) +#define OMAP44XX_REG_T_RC_SHIFT 6 +#define OMAP44XX_REG_T_RC_MASK (0x3f << 6) +#define OMAP44XX_REG_T_RRD_SHIFT 3 +#define OMAP44XX_REG_T_RRD_MASK (0x7 << 3) +#define OMAP44XX_REG_T_WTR_SHIFT 0 +#define OMAP44XX_REG_T_WTR_MASK (0x7 << 0) + +/* SDRAM_TIM_1_SHDW */ +#define OMAP44XX_REG_T_RP_SHDW_SHIFT 25 +#define OMAP44XX_REG_T_RP_SHDW_MASK (0xf << 25) +#define OMAP44XX_REG_T_RCD_SHDW_SHIFT 21 +#define OMAP44XX_REG_T_RCD_SHDW_MASK (0xf << 21) +#define OMAP44XX_REG_T_WR_SHDW_SHIFT 17 +#define OMAP44XX_REG_T_WR_SHDW_MASK (0xf << 17) +#define OMAP44XX_REG_T_RAS_SHDW_SHIFT 12 +#define OMAP44XX_REG_T_RAS_SHDW_MASK (0x1f << 12) +#define OMAP44XX_REG_T_RC_SHDW_SHIFT 6 +#define OMAP44XX_REG_T_RC_SHDW_MASK (0x3f << 6) +#define OMAP44XX_REG_T_RRD_SHDW_SHIFT 3 +#define OMAP44XX_REG_T_RRD_SHDW_MASK (0x7 << 3) +#define OMAP44XX_REG_T_WTR_SHDW_SHIFT 0 +#define OMAP44XX_REG_T_WTR_SHDW_MASK (0x7 << 0) + +/* SDRAM_TIM_2 */ +#define OMAP44XX_REG_T_XP_SHIFT 28 +#define OMAP44XX_REG_T_XP_MASK (0x7 << 28) +#define OMAP44XX_REG_T_ODT_SHIFT 25 +#define OMAP44XX_REG_T_ODT_MASK (0x7 << 25) +#define OMAP44XX_REG_T_XSNR_SHIFT 16 +#define OMAP44XX_REG_T_XSNR_MASK (0x1ff << 16) +#define OMAP44XX_REG_T_XSRD_SHIFT 6 +#define OMAP44XX_REG_T_XSRD_MASK (0x3ff << 6) +#define OMAP44XX_REG_T_RTP_SHIFT 3 +#define OMAP44XX_REG_T_RTP_MASK (0x7 << 3) +#define OMAP44XX_REG_T_CKE_SHIFT 0 +#define OMAP44XX_REG_T_CKE_MASK (0x7 << 0) + +/* SDRAM_TIM_2_SHDW */ +#define OMAP44XX_REG_T_XP_SHDW_SHIFT 28 +#define OMAP44XX_REG_T_XP_SHDW_MASK (0x7 << 28) +#define OMAP44XX_REG_T_ODT_SHDW_SHIFT 25 +#define OMAP44XX_REG_T_ODT_SHDW_MASK (0x7 << 25) +#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT 16 +#define OMAP44XX_REG_T_XSNR_SHDW_MASK (0x1ff << 16) +#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT 6 +#define OMAP44XX_REG_T_XSRD_SHDW_MASK (0x3ff << 6) +#define OMAP44XX_REG_T_RTP_SHDW_SHIFT 3 +#define OMAP44XX_REG_T_RTP_SHDW_MASK (0x7 << 3) +#define OMAP44XX_REG_T_CKE_SHDW_SHIFT 0 +#define OMAP44XX_REG_T_CKE_SHDW_MASK (0x7 << 0) + +/* SDRAM_TIM_3 */ +#define OMAP44XX_REG_T_CKESR_SHIFT 21 +#define OMAP44XX_REG_T_CKESR_MASK (0x7 << 21) +#define OMAP44XX_REG_ZQ_ZQCS_SHIFT 15 +#define OMAP44XX_REG_ZQ_ZQCS_MASK (0x3f << 15) +#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT 13 +#define OMAP44XX_REG_T_TDQSCKMAX_MASK (0x3 << 13) +#define OMAP44XX_REG_T_RFC_SHIFT 4 +#define OMAP44XX_REG_T_RFC_MASK (0x1ff << 4) +#define OMAP44XX_REG_T_RAS_MAX_SHIFT 0 +#define OMAP44XX_REG_T_RAS_MAX_MASK (0xf << 0) + +/* SDRAM_TIM_3_SHDW */ +#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT 21 +#define OMAP44XX_REG_T_CKESR_SHDW_MASK (0x7 << 21) +#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT 15 +#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15) +#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT 13 +#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13) +#define OMAP44XX_REG_T_RFC_SHDW_SHIFT 4 +#define OMAP44XX_REG_T_RFC_SHDW_MASK (0x1ff << 4) +#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT 0 +#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK (0xf << 0) + +/* LPDDR2_NVM_TIM */ +#define OMAP44XX_REG_NVM_T_XP_SHIFT 28 +#define OMAP44XX_REG_NVM_T_XP_MASK (0x7 << 28) +#define OMAP44XX_REG_NVM_T_WTR_SHIFT 24 +#define OMAP44XX_REG_NVM_T_WTR_MASK (0x7 << 24) +#define OMAP44XX_REG_NVM_T_RP_SHIFT 20 +#define OMAP44XX_REG_NVM_T_RP_MASK (0xf << 20) +#define OMAP44XX_REG_NVM_T_WRA_SHIFT 16 +#define OMAP44XX_REG_NVM_T_WRA_MASK (0xf << 16) +#define OMAP44XX_REG_NVM_T_RRD_SHIFT 8 +#define OMAP44XX_REG_NVM_T_RRD_MASK (0xff << 8) +#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT 0 +#define OMAP44XX_REG_NVM_T_RCDMIN_MASK (0xff << 0) + +/* LPDDR2_NVM_TIM_SHDW */ +#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT 28 +#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK (0x7 << 28) +#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT 24 +#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24) +#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT 20 +#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK (0xf << 20) +#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT 16 +#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK (0xf << 16) +#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT 8 +#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK (0xff << 8) +#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT 0 +#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0) + +/* PWR_MGMT_CTRL */ +#define OMAP44XX_REG_IDLEMODE_SHIFT 30 +#define OMAP44XX_REG_IDLEMODE_MASK (0x3 << 30) +#define OMAP44XX_REG_PD_TIM_SHIFT 12 +#define OMAP44XX_REG_PD_TIM_MASK (0xf << 12) +#define OMAP44XX_REG_DPD_EN_SHIFT 11 +#define OMAP44XX_REG_DPD_EN_MASK (1 << 11) +#define OMAP44XX_REG_LP_MODE_SHIFT 8 +#define OMAP44XX_REG_LP_MODE_MASK (0x7 << 8) +#define OMAP44XX_REG_SR_TIM_SHIFT 4 +#define OMAP44XX_REG_SR_TIM_MASK (0xf << 4) +#define OMAP44XX_REG_CS_TIM_SHIFT 0 +#define OMAP44XX_REG_CS_TIM_MASK (0xf << 0) + +/* PWR_MGMT_CTRL_SHDW */ +#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT 8 +#define OMAP44XX_REG_PD_TIM_SHDW_MASK (0xf << 8) +#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT 4 +#define OMAP44XX_REG_SR_TIM_SHDW_MASK (0xf << 4) +#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT 0 +#define OMAP44XX_REG_CS_TIM_SHDW_MASK (0xf << 0) + +/* LPDDR2_MODE_REG_DATA */ +#define OMAP44XX_REG_VALUE_0_SHIFT 0 +#define OMAP44XX_REG_VALUE_0_MASK (0x7f << 0) + +/* LPDDR2_MODE_REG_CFG */ +#define OMAP44XX_REG_CS_SHIFT 31 +#define OMAP44XX_REG_CS_MASK (1 << 31) +#define OMAP44XX_REG_REFRESH_EN_SHIFT 30 +#define OMAP44XX_REG_REFRESH_EN_MASK (1 << 30) +#define OMAP44XX_REG_ADDRESS_SHIFT 0 +#define OMAP44XX_REG_ADDRESS_MASK (0xff << 0) + +/* OCP_CONFIG */ +#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24 +#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24) +#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16 +#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16) +#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0 +#define OMAP44XX_REG_PR_OLD_COUNT_MASK (0xff << 0) + +/* OCP_CFG_VAL_1 */ +#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT 30 +#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK (0x3 << 30) +#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT 28 +#define OMAP44XX_REG_LL_BUS_WIDTH_MASK (0x3 << 28) +#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT 8 +#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK (0xff << 8) +#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT 0 +#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK (0xff << 0) + +/* OCP_CFG_VAL_2 */ +#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT 16 +#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK (0xff << 16) +#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT 8 +#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK (0xff << 8) +#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT 0 +#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0) + +/* IODFT_TLGC */ +#define OMAP44XX_REG_TLEC_SHIFT 16 +#define OMAP44XX_REG_TLEC_MASK (0xffff << 16) +#define OMAP44XX_REG_MT_SHIFT 14 +#define OMAP44XX_REG_MT_MASK (1 << 14) +#define OMAP44XX_REG_ACT_CAP_EN_SHIFT 13 +#define OMAP44XX_REG_ACT_CAP_EN_MASK (1 << 13) +#define OMAP44XX_REG_OPG_LD_SHIFT 12 +#define OMAP44XX_REG_OPG_LD_MASK (1 << 12) +#define OMAP44XX_REG_RESET_PHY_SHIFT 10 +#define OMAP44XX_REG_RESET_PHY_MASK (1 << 10) +#define OMAP44XX_REG_MMS_SHIFT 8 +#define OMAP44XX_REG_MMS_MASK (1 << 8) +#define OMAP44XX_REG_MC_SHIFT 4 +#define OMAP44XX_REG_MC_MASK (0x3 << 4) +#define OMAP44XX_REG_PC_SHIFT 1 +#define OMAP44XX_REG_PC_MASK (0x7 << 1) +#define OMAP44XX_REG_TM_SHIFT 0 +#define OMAP44XX_REG_TM_MASK (1 << 0) + +/* IODFT_CTRL_MISR_RSLT */ +#define OMAP44XX_REG_DQM_TLMR_SHIFT 16 +#define OMAP44XX_REG_DQM_TLMR_MASK (0x3ff << 16) +#define OMAP44XX_REG_CTL_TLMR_SHIFT 0 +#define OMAP44XX_REG_CTL_TLMR_MASK (0x7ff << 0) + +/* IODFT_ADDR_MISR_RSLT */ +#define OMAP44XX_REG_ADDR_TLMR_SHIFT 0 +#define OMAP44XX_REG_ADDR_TLMR_MASK (0x1fffff << 0) + +/* IODFT_DATA_MISR_RSLT_1 */ +#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT 0 +#define OMAP44XX_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0) + +/* IODFT_DATA_MISR_RSLT_2 */ +#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT 0 +#define OMAP44XX_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0) + +/* IODFT_DATA_MISR_RSLT_3 */ +#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT 0 +#define OMAP44XX_REG_DATA_TLMR_66_64_MASK (0x7 << 0) + +/* PERF_CNT_1 */ +#define OMAP44XX_REG_COUNTER1_SHIFT 0 +#define OMAP44XX_REG_COUNTER1_MASK (0xffffffff << 0) + +/* PERF_CNT_2 */ +#define OMAP44XX_REG_COUNTER2_SHIFT 0 +#define OMAP44XX_REG_COUNTER2_MASK (0xffffffff << 0) + +/* PERF_CNT_CFG */ +#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT 31 +#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK (1 << 31) +#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT 30 +#define OMAP44XX_REG_CNTR2_REGION_EN_MASK (1 << 30) +#define OMAP44XX_REG_CNTR2_CFG_SHIFT 16 +#define OMAP44XX_REG_CNTR2_CFG_MASK (0xf << 16) +#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT 15 +#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK (1 << 15) +#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT 14 +#define OMAP44XX_REG_CNTR1_REGION_EN_MASK (1 << 14) +#define OMAP44XX_REG_CNTR1_CFG_SHIFT 0 +#define OMAP44XX_REG_CNTR1_CFG_MASK (0xf << 0) + +/* PERF_CNT_SEL */ +#define OMAP44XX_REG_MCONNID2_SHIFT 24 +#define OMAP44XX_REG_MCONNID2_MASK (0xff << 24) +#define OMAP44XX_REG_REGION_SEL2_SHIFT 16 +#define OMAP44XX_REG_REGION_SEL2_MASK (0x3 << 16) +#define OMAP44XX_REG_MCONNID1_SHIFT 8 +#define OMAP44XX_REG_MCONNID1_MASK (0xff << 8) +#define OMAP44XX_REG_REGION_SEL1_SHIFT 0 +#define OMAP44XX_REG_REGION_SEL1_MASK (0x3 << 0) + +/* PERF_CNT_TIM */ +#define OMAP44XX_REG_TOTAL_TIME_SHIFT 0 +#define OMAP44XX_REG_TOTAL_TIME_MASK (0xffffffff << 0) + +/* READ_IDLE_CTRL */ +#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT 16 +#define OMAP44XX_REG_READ_IDLE_LEN_MASK (0xf << 16) +#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT 0 +#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0) + +/* READ_IDLE_CTRL_SHDW */ +#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT 16 +#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16) +#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0 +#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0) + +/* IRQ_EOI */ +#define OMAP44XX_REG_EOI_SHIFT 0 +#define OMAP44XX_REG_EOI_MASK (1 << 0) + +/* IRQSTATUS_RAW_SYS */ +#define OMAP44XX_REG_DNV_SYS_SHIFT 2 +#define OMAP44XX_REG_DNV_SYS_MASK (1 << 2) +#define OMAP44XX_REG_TA_SYS_SHIFT 1 +#define OMAP44XX_REG_TA_SYS_MASK (1 << 1) +#define OMAP44XX_REG_ERR_SYS_SHIFT 0 +#define OMAP44XX_REG_ERR_SYS_MASK (1 << 0) + +/* IRQSTATUS_RAW_LL */ +#define OMAP44XX_REG_DNV_LL_SHIFT 2 +#define OMAP44XX_REG_DNV_LL_MASK (1 << 2) +#define OMAP44XX_REG_TA_LL_SHIFT 1 +#define OMAP44XX_REG_TA_LL_MASK (1 << 1) +#define OMAP44XX_REG_ERR_LL_SHIFT 0 +#define OMAP44XX_REG_ERR_LL_MASK (1 << 0) + +/* IRQSTATUS_SYS */ + +/* IRQSTATUS_LL */ + +/* IRQENABLE_SET_SYS */ +#define OMAP44XX_REG_EN_DNV_SYS_SHIFT 2 +#define OMAP44XX_REG_EN_DNV_SYS_MASK (1 << 2) +#define OMAP44XX_REG_EN_TA_SYS_SHIFT 1 +#define OMAP44XX_REG_EN_TA_SYS_MASK (1 << 1) +#define OMAP44XX_REG_EN_ERR_SYS_SHIFT 0 +#define OMAP44XX_REG_EN_ERR_SYS_MASK (1 << 0) + +/* IRQENABLE_SET_LL */ +#define OMAP44XX_REG_EN_DNV_LL_SHIFT 2 +#define OMAP44XX_REG_EN_DNV_LL_MASK (1 << 2) +#define OMAP44XX_REG_EN_TA_LL_SHIFT 1 +#define OMAP44XX_REG_EN_TA_LL_MASK (1 << 1) +#define OMAP44XX_REG_EN_ERR_LL_SHIFT 0 +#define OMAP44XX_REG_EN_ERR_LL_MASK (1 << 0) + +/* IRQENABLE_CLR_SYS */ + +/* IRQENABLE_CLR_LL */ + +/* ZQ_CONFIG */ +#define OMAP44XX_REG_ZQ_CS1EN_SHIFT 31 +#define OMAP44XX_REG_ZQ_CS1EN_MASK (1 << 31) +#define OMAP44XX_REG_ZQ_CS0EN_SHIFT 30 +#define OMAP44XX_REG_ZQ_CS0EN_MASK (1 << 30) +#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT 29 +#define OMAP44XX_REG_ZQ_DUALCALEN_MASK (1 << 29) +#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT 28 +#define OMAP44XX_REG_ZQ_SFEXITEN_MASK (1 << 28) +#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT 18 +#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18) +#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT 16 +#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16) +#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT 0 +#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK (0xffff << 0) + +/* TEMP_ALERT_CONFIG */ +#define OMAP44XX_REG_TA_CS1EN_SHIFT 31 +#define OMAP44XX_REG_TA_CS1EN_MASK (1 << 31) +#define OMAP44XX_REG_TA_CS0EN_SHIFT 30 +#define OMAP44XX_REG_TA_CS0EN_MASK (1 << 30) +#define OMAP44XX_REG_TA_SFEXITEN_SHIFT 28 +#define OMAP44XX_REG_TA_SFEXITEN_MASK (1 << 28) +#define OMAP44XX_REG_TA_DEVWDT_SHIFT 26 +#define OMAP44XX_REG_TA_DEVWDT_MASK (0x3 << 26) +#define OMAP44XX_REG_TA_DEVCNT_SHIFT 24 +#define OMAP44XX_REG_TA_DEVCNT_MASK (0x3 << 24) +#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT 0 +#define OMAP44XX_REG_TA_REFINTERVAL_MASK (0x3fffff << 0) + +/* OCP_ERR_LOG */ +#define OMAP44XX_REG_MADDRSPACE_SHIFT 14 +#define OMAP44XX_REG_MADDRSPACE_MASK (0x3 << 14) +#define OMAP44XX_REG_MBURSTSEQ_SHIFT 11 +#define OMAP44XX_REG_MBURSTSEQ_MASK (0x7 << 11) +#define OMAP44XX_REG_MCMD_SHIFT 8 +#define OMAP44XX_REG_MCMD_MASK (0x7 << 8) +#define OMAP44XX_REG_MCONNID_SHIFT 0 +#define OMAP44XX_REG_MCONNID_MASK (0xff << 0) + +/* DDR_PHY_CTRL_1 */ +#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT 4 +#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4) +#define OMAP44XX_REG_READ_LATENCY_SHIFT 0 +#define OMAP44XX_REG_READ_LATENCY_MASK (0xf << 0) +#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4 +#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4) +#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12 +#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12) + +/* DDR_PHY_CTRL_1_SHDW */ +#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4 +#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4) +#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT 0 +#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK (0xf << 0) +#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4 +#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4) +#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12 +#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12) + +/* DDR_PHY_CTRL_2 */ +#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT 0 +#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0) + +/* DMM */ +#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040 + +/* DMM_LISA_MAP */ +#define OMAP44XX_SYS_ADDR_SHIFT 24 +#define OMAP44XX_SYS_ADDR_MASK (0xff << 24) +#define OMAP44XX_SYS_SIZE_SHIFT 20 +#define OMAP44XX_SYS_SIZE_MASK (0x7 << 20) +#define OMAP44XX_SDRC_INTL_SHIFT 18 +#define OMAP44XX_SDRC_INTL_MASK (0x3 << 18) +#define OMAP44XX_SDRC_ADDRSPC_SHIFT 16 +#define OMAP44XX_SDRC_ADDRSPC_MASK (0x3 << 16) +#define OMAP44XX_SDRC_MAP_SHIFT 8 +#define OMAP44XX_SDRC_MAP_MASK (0x3 << 8) +#define OMAP44XX_SDRC_ADDR_SHIFT 0 +#define OMAP44XX_SDRC_ADDR_MASK (0xff << 0) + +/* DMM_LISA_MAP fields */ +#define DMM_SDRC_MAP_UNMAPPED 0 +#define DMM_SDRC_MAP_EMIF1_ONLY 1 +#define DMM_SDRC_MAP_EMIF2_ONLY 2 +#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3 + +#define DMM_SDRC_INTL_NONE 0 +#define DMM_SDRC_INTL_128B 1 +#define DMM_SDRC_INTL_256B 2 +#define DMM_SDRC_INTL_512 3 + +#define DMM_SDRC_ADDR_SPC_SDRAM 0 +#define DMM_SDRC_ADDR_SPC_NVM 1 +#define DMM_SDRC_ADDR_SPC_INVALID 2 + +#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\ + (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\ + (DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\ + (CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT)) + +#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)) + +#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)) + +/* Trap for invalid TILER PAT entries */ +#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\ + (0 << OMAP44XX_SDRC_ADDR_SHIFT) |\ + (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\ + (0xFF << OMAP44XX_SYS_ADDR_SHIFT)) + + +/* Reg mapping structure */ +struct emif_reg_struct { + u32 emif_mod_id_rev; + u32 emif_status; + u32 emif_sdram_config; + u32 emif_lpddr2_nvm_config; + u32 emif_sdram_ref_ctrl; + u32 emif_sdram_ref_ctrl_shdw; + u32 emif_sdram_tim_1; + u32 emif_sdram_tim_1_shdw; + u32 emif_sdram_tim_2; + u32 emif_sdram_tim_2_shdw; + u32 emif_sdram_tim_3; + u32 emif_sdram_tim_3_shdw; + u32 emif_lpddr2_nvm_tim; + u32 emif_lpddr2_nvm_tim_shdw; + u32 emif_pwr_mgmt_ctrl; + u32 emif_pwr_mgmt_ctrl_shdw; + u32 emif_lpddr2_mode_reg_data; + u32 padding1[1]; + u32 emif_lpddr2_mode_reg_data_es2; + u32 padding11[1]; + u32 emif_lpddr2_mode_reg_cfg; + u32 emif_l3_config; + u32 emif_l3_cfg_val_1; + u32 emif_l3_cfg_val_2; + u32 emif_iodft_tlgc; + u32 padding2[7]; + u32 emif_perf_cnt_1; + u32 emif_perf_cnt_2; + u32 emif_perf_cnt_cfg; + u32 emif_perf_cnt_sel; + u32 emif_perf_cnt_tim; + u32 padding3; + u32 emif_read_idlectrl; + u32 emif_read_idlectrl_shdw; + u32 padding4; + u32 emif_irqstatus_raw_sys; + u32 emif_irqstatus_raw_ll; + u32 emif_irqstatus_sys; + u32 emif_irqstatus_ll; + u32 emif_irqenable_set_sys; + u32 emif_irqenable_set_ll; + u32 emif_irqenable_clr_sys; + u32 emif_irqenable_clr_ll; + u32 padding5; + u32 emif_zq_config; + u32 emif_temp_alert_config; + u32 emif_l3_err_log; + u32 padding6[4]; + u32 emif_ddr_phy_ctrl_1; + u32 emif_ddr_phy_ctrl_1_shdw; + u32 emif_ddr_phy_ctrl_2; +}; + +struct dmm_lisa_map_regs { + u32 dmm_lisa_map_0; + u32 dmm_lisa_map_1; + u32 dmm_lisa_map_2; + u32 dmm_lisa_map_3; +}; + +struct control_lpddr2io_regs { + u32 control_lpddr2io1_0; + u32 control_lpddr2io1_1; + u32 control_lpddr2io1_2; + u32 control_lpddr2io1_3; + u32 control_lpddr2io2_0; + u32 control_lpddr2io2_1; + u32 control_lpddr2io2_2; + u32 control_lpddr2io2_3; +}; + +#define CS0 0 +#define CS1 1 +/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ +#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */ + +/* + * The period of DDR clk is represented as numerator and denominator for + * better accuracy in integer based calculations. However, if the numerator + * and denominator are very huge there may be chances of overflow in + * calculations. So, as a trade-off keep denominator(and consequently + * numerator) within a limit sacrificing some accuracy - but not much + * If denominator and numerator are already small (such as at 400 MHz) + * no adjustment is needed + */ +#define EMIF_PERIOD_DEN_LIMIT 1000 +/* + * Maximum number of different frequencies supported by EMIF driver + * Determines the number of entries in the pointer array for register + * cache + */ +#define EMIF_MAX_NUM_FREQUENCIES 6 +/* + * Indices into the Addressing Table array. + * One entry each for all the different types of devices with different + * addressing schemes + */ +#define ADDR_TABLE_INDEX64M 0 +#define ADDR_TABLE_INDEX128M 1 +#define ADDR_TABLE_INDEX256M 2 +#define ADDR_TABLE_INDEX512M 3 +#define ADDR_TABLE_INDEX1GS4 4 +#define ADDR_TABLE_INDEX2GS4 5 +#define ADDR_TABLE_INDEX4G 6 +#define ADDR_TABLE_INDEX8G 7 +#define ADDR_TABLE_INDEX1GS2 8 +#define ADDR_TABLE_INDEX2GS2 9 +#define ADDR_TABLE_INDEXMAX 10 + +/* Number of Row bits */ +#define ROW_9 0 +#define ROW_10 1 +#define ROW_11 2 +#define ROW_12 3 +#define ROW_13 4 +#define ROW_14 5 +#define ROW_15 6 +#define ROW_16 7 + +/* Number of Column bits */ +#define COL_8 0 +#define COL_9 1 +#define COL_10 2 +#define COL_11 3 +#define COL_7 4 /*Not supported by OMAP included for completeness */ + +/* Number of Banks*/ +#define BANKS1 0 +#define BANKS2 1 +#define BANKS4 2 +#define BANKS8 3 + +/* Refresh rate in micro seconds x 10 */ +#define T_REFI_15_6 156 +#define T_REFI_7_8 78 +#define T_REFI_3_9 39 + +#define EBANK_CS1_DIS 0 +#define EBANK_CS1_EN 1 + +/* Read Latency used by the device at reset */ +#define RL_BOOT 3 +/* Read Latency for the highest frequency you want to use */ +#define RL_FINAL 6 + +/* Interleaving policies at EMIF level- between banks and Chip Selects */ +#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0 +#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3 + +/* + * Interleaving policy to be used + * Currently set to MAX interleaving for better performance + */ +#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING + +/* State of the core voltage: + * This is important for some parameters such as read idle control and + * ZQ calibration timings. Timings are much stricter when voltage ramp + * is happening compared to when the voltage is stable. + * We need to calculate two sets of values for these parameters and use + * them accordingly + */ +#define LPDDR2_VOLTAGE_STABLE 0 +#define LPDDR2_VOLTAGE_RAMPING 1 + +/* Length of the forced read idle period in terms of cycles */ +#define EMIF_REG_READ_IDLE_LEN_VAL 5 + +/* Interval between forced 'read idles' */ +/* To be used when voltage is changed for DPS/DVFS - 1us */ +#define READ_IDLE_INTERVAL_DVFS (1*1000) +/* + * To be used when voltage is not scaled except by Smart Reflex + * 50us - or maximum value will do + */ +#define READ_IDLE_INTERVAL_NORMAL (50*1000) + + +/* + * Unless voltage is changing due to DVFS one ZQCS command every 50ms should + * be enough. This shoule be enough also in the case when voltage is changing + * due to smart-reflex. + */ +#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000) +/* + * If voltage is changing due to DVFS ZQCS should be performed more + * often(every 50us) + */ +#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50 + +/* The interval between ZQCL commands as a multiple of ZQCS interval */ +#define REG_ZQ_ZQCL_MULT 4 +/* The interval between ZQINIT commands as a multiple of ZQCL interval */ +#define REG_ZQ_ZQINIT_MULT 3 +/* Enable ZQ Calibration on exiting Self-refresh */ +#define REG_ZQ_SFEXITEN_ENABLE 1 +/* + * ZQ Calibration simultaneously on both chip-selects: + * Needs one calibration resistor per CS + * None of the boards that we know of have this capability + * So disabled by default + */ +#define REG_ZQ_DUALCALEN_DISABLE 0 +/* + * Enable ZQ Calibration by default on CS0. If we are asked to program + * the EMIF there will be something connected to CS0 for sure + */ +#define REG_ZQ_CS0EN_ENABLE 1 + +/* EMIF_PWR_MGMT_CTRL register */ +/* Low power modes */ +#define LP_MODE_DISABLE 0 +#define LP_MODE_CLOCK_STOP 1 +#define LP_MODE_SELF_REFRESH 2 +#define LP_MODE_PWR_DN 3 + +/* REG_DPD_EN */ +#define DPD_DISABLE 0 +#define DPD_ENABLE 1 + +/* Maximum delay before Low Power Modes */ +#define REG_CS_TIM 0xF +#define REG_SR_TIM 0xF +#define REG_PD_TIM 0xF + +/* EMIF_PWR_MGMT_CTRL register */ +#define EMIF_PWR_MGMT_CTRL (\ + ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\ + ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\ + ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\ + ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\ + ((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\ + & OMAP44XX_REG_LP_MODE_MASK) |\ + ((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\ + & OMAP44XX_REG_DPD_EN_MASK))\ + +#define EMIF_PWR_MGMT_CTRL_SHDW (\ + ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\ + & OMAP44XX_REG_CS_TIM_SHDW_MASK) |\ + ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\ + & OMAP44XX_REG_SR_TIM_SHDW_MASK) |\ + ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\ + & OMAP44XX_REG_PD_TIM_SHDW_MASK) |\ + ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\ + & OMAP44XX_REG_PD_TIM_SHDW_MASK)) + +/* EMIF_L3_CONFIG register value for ES1*/ +#define EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00 0x0A0000FF +/* + * Value of bits 12:31 of DDR_PHY_CTRL_1 register: + * All these fields have magic values dependent on frequency and + * determined by PHY and DLL integration with EMIF. Setting the magic + * values suggested by hw team. + */ +#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF +#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41 +#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80 +#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF + +/* +* MR1 value: +* Burst length : 8 +* Burst type : sequential +* Wrap : enabled +* nWR : 3(default). EMIF does not do pre-charge. +* : So nWR is don't care +*/ +#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23 + +/* MR2 */ +#define MR2_RL3_WL1 1 +#define MR2_RL4_WL2 2 +#define MR2_RL5_WL2 3 +#define MR2_RL6_WL3 4 + +/* MR10: ZQ calibration codes */ +#define MR10_ZQ_ZQCS 0x56 +#define MR10_ZQ_ZQCL 0xAB +#define MR10_ZQ_ZQINIT 0xFF +#define MR10_ZQ_ZQRESET 0xC3 + +/* TEMP_ALERT_CONFIG */ +#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */ +#define TEMP_ALERT_CONFIG_DEVCT_1 0 +#define TEMP_ALERT_CONFIG_DEVWDT_32 2 + +/* MR16 value: refresh full array(no partial array self refresh) */ +#define MR16_REF_FULL_ARRAY 0 + +/* LPDDR2 IO regs */ +#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C +#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E + +/* CONTROL_EFUSE_2 */ +#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 + +/* + * Maximum number of entries we keep in our array of timing tables + * We need not keep all the speed bins supported by the device + * We need to keep timing tables for only the speed bins that we + * are interested in + */ +#define MAX_NUM_SPEEDBINS 4 + +/* LPDDR2 Densities */ +#define LPDDR2_DENSITY_64Mb 0 +#define LPDDR2_DENSITY_128Mb 1 +#define LPDDR2_DENSITY_256Mb 2 +#define LPDDR2_DENSITY_512Mb 3 +#define LPDDR2_DENSITY_1Gb 4 +#define LPDDR2_DENSITY_2Gb 5 +#define LPDDR2_DENSITY_4Gb 6 +#define LPDDR2_DENSITY_8Gb 7 +#define LPDDR2_DENSITY_16Gb 8 +#define LPDDR2_DENSITY_32Gb 9 + +/* LPDDR2 type */ +#define LPDDR2_TYPE_S4 0 +#define LPDDR2_TYPE_S2 1 +#define LPDDR2_TYPE_NVM 2 + +/* LPDDR2 IO width */ +#define LPDDR2_IO_WIDTH_32 0 +#define LPDDR2_IO_WIDTH_16 1 +#define LPDDR2_IO_WIDTH_8 2 + +/* Mode register numbers */ +#define LPDDR2_MR0 0 +#define LPDDR2_MR1 1 +#define LPDDR2_MR2 2 +#define LPDDR2_MR3 3 +#define LPDDR2_MR4 4 +#define LPDDR2_MR5 5 +#define LPDDR2_MR6 6 +#define LPDDR2_MR7 7 +#define LPDDR2_MR8 8 +#define LPDDR2_MR9 9 +#define LPDDR2_MR10 10 +#define LPDDR2_MR11 11 +#define LPDDR2_MR16 16 +#define LPDDR2_MR17 17 +#define LPDDR2_MR18 18 + +/* MR0 */ +#define LPDDR2_MR0_DAI_SHIFT 0 +#define LPDDR2_MR0_DAI_MASK 1 +#define LPDDR2_MR0_DI_SHIFT 1 +#define LPDDR2_MR0_DI_MASK (1 << 1) +#define LPDDR2_MR0_DNVI_SHIFT 2 +#define LPDDR2_MR0_DNVI_MASK (1 << 2) + +/* MR4 */ +#define MR4_SDRAM_REF_RATE_SHIFT 0 +#define MR4_SDRAM_REF_RATE_MASK 7 +#define MR4_TUF_SHIFT 7 +#define MR4_TUF_MASK (1 << 7) + +/* MR4 SDRAM Refresh Rate field values */ +#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0 +#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1 +#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2 +#define SDRAM_TEMP_NOMINAL 0x3 +#define SDRAM_TEMP_RESERVED_4 0x4 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 +#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 + +#define LPDDR2_MANUFACTURER_SAMSUNG 1 +#define LPDDR2_MANUFACTURER_QIMONDA 2 +#define LPDDR2_MANUFACTURER_ELPIDA 3 +#define LPDDR2_MANUFACTURER_ETRON 4 +#define LPDDR2_MANUFACTURER_NANYA 5 +#define LPDDR2_MANUFACTURER_HYNIX 6 +#define LPDDR2_MANUFACTURER_MOSEL 7 +#define LPDDR2_MANUFACTURER_WINBOND 8 +#define LPDDR2_MANUFACTURER_ESMT 9 +#define LPDDR2_MANUFACTURER_SPANSION 11 +#define LPDDR2_MANUFACTURER_SST 12 +#define LPDDR2_MANUFACTURER_ZMOS 13 +#define LPDDR2_MANUFACTURER_INTEL 14 +#define LPDDR2_MANUFACTURER_NUMONYX 254 +#define LPDDR2_MANUFACTURER_MICRON 255 + +/* MR8 register fields */ +#define MR8_TYPE_SHIFT 0x0 +#define MR8_TYPE_MASK 0x3 +#define MR8_DENSITY_SHIFT 0x2 +#define MR8_DENSITY_MASK (0xF << 0x2) +#define MR8_IO_WIDTH_SHIFT 0x6 +#define MR8_IO_WIDTH_MASK (0x3 << 0x6) + +struct lpddr2_addressing { + u8 num_banks; + u8 t_REFI_us_x10; + u8 row_sz[2]; /* One entry each for x32 and x16 */ + u8 col_sz[2]; /* One entry each for x32 and x16 */ +}; + +/* Structure for timings from the DDR datasheet */ +struct lpddr2_ac_timings { + u32 max_freq; + u8 RL; + u8 tRPab; + u8 tRCD; + u8 tWR; + u8 tRASmin; + u8 tRRD; + u8 tWTRx2; + u8 tXSR; + u8 tXPx2; + u8 tRFCab; + u8 tRTPx2; + u8 tCKE; + u8 tCKESR; + u8 tZQCS; + u32 tZQCL; + u32 tZQINIT; + u8 tDQSCKMAXx2; + u8 tRASmax; + u8 tFAW; + +}; + +/* + * Min tCK values for some of the parameters: + * If the calculated clock cycles for the respective parameter is + * less than the corresponding min tCK value, we need to set the min + * tCK value. This may happen at lower frequencies. + */ +struct lpddr2_min_tck { + u32 tRL; + u32 tRP_AB; + u32 tRCD; + u32 tWR; + u32 tRAS_MIN; + u32 tRRD; + u32 tWTR; + u32 tXP; + u32 tRTP; + u8 tCKE; + u32 tCKESR; + u32 tFAW; +}; + +struct lpddr2_device_details { + u8 type; + u8 density; + u8 io_width; + u8 manufacturer; +}; + +struct lpddr2_device_timings { + const struct lpddr2_ac_timings **ac_timings; + const struct lpddr2_min_tck *min_tck; +}; + +/* Details of the devices connected to each chip-select of an EMIF instance */ +struct emif_device_details { + const struct lpddr2_device_details *cs0_device_details; + const struct lpddr2_device_details *cs1_device_details; + const struct lpddr2_device_timings *cs0_device_timings; + const struct lpddr2_device_timings *cs1_device_timings; +}; + +/* + * Structure containing shadow of important registers in EMIF + * The calculation function fills in this structure to be later used for + * initialization and DVFS + */ +struct emif_regs { + u32 freq; + u32 sdram_config_init; + u32 sdram_config; + u32 ref_ctrl; + u32 sdram_tim1; + u32 sdram_tim2; + u32 sdram_tim3; + u32 read_idle_ctrl; + u32 zq_config; + u32 temp_alert_config; + u32 emif_ddr_phy_ctlr_1_init; + u32 emif_ddr_phy_ctlr_1; +}; + +/* assert macros */ +#if defined(DEBUG) +#define emif_assert(c) ({ if (!(c)) for (;;); }) +#else +#define emif_assert(c) ({ if (0) hang(); }) +#endif + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs); +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs); + +#endif diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h index 76b06c2fd1..c9c86e1c76 100644 --- a/arch/arm/include/asm/arch-omap4/omap4.h +++ b/arch/arm/include/asm/arch-omap4/omap4.h @@ -51,6 +51,11 @@ #define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) #define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) +/* LPDDR2 IO regs */ +#define LPDDR2_IO_REGS_BASE 0x4A100638 + +#define CONTROL_EFUSE_2 0x4A100704 + /* CONTROL_ID_CODE */ #define CONTROL_ID_CODE 0x4A002204 diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index f871921d4a..7183a9063f 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -49,6 +49,8 @@ void bypass_dpll(u32 *const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap4_ddr_clk(void); +void sdram_init(void); +u32 omap4_sdram_size(void); static inline u32 running_from_sdram(void) {