From: Michal Simek Date: Thu, 8 Aug 2019 10:44:22 +0000 (+0200) Subject: arm64: zynqmp: Use ethernet-phy as node name for ethernet phys X-Git-Tag: v2020.01-rc1~8^2~64 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2975a42b42c538f9d69d19cebcc277428732fb73;p=oweals%2Fu-boot.git arm64: zynqmp: Use ethernet-phy as node name for ethernet phys Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek --- diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts index ae834bc2a6..6e5a0d2c5b 100644 --- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts @@ -58,7 +58,7 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; is-internal-pcspma; - phy0: phy@0 { /* marwell m88e1512 */ + phy0: ethernet-phy@0 { /* marwell m88e1512 */ reg = <0>; reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; /* xlnx,phy-type = ; */ diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts index 65eeea1b26..889491456a 100644 --- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts +++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts @@ -89,7 +89,7 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; /* DTG generates this properly 1512 */ phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; - phy0: phy@0 { /* marwell m88e1512 - SGMII */ + phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */ reg = <0>; /* xlnx,phy-type = ; */ }; diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index f49da8162a..04d5fc9f93 100644 --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -76,7 +76,7 @@ phy-mode = "sgmii"; /* DTG generates this properly 1512 */ is-internal-pcspma; /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index 8824f5cc02..bb6a94eefb 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -75,7 +75,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index afa90a8a5b..b8cc5ed22e 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -85,7 +85,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@5 { + phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index d6a010355b..2ead8dd24d 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -76,7 +76,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { /* VSC8211 */ + phy0: ethernet-phy@0 { /* VSC8211 */ reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index 0632b18ccf..12c0173c55 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 6e22871713..e2a49a61cd 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -110,7 +110,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@21 { + phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index af4d86882a..08a4887401 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -16,7 +16,7 @@ &gem3 { phy-handle = <&phyc>; - phyc: phy@c { + phyc: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index c7a3cdcf61..3e63765c6b 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -54,7 +54,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index 7df16b047c..8d8cabfcb2 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -55,7 +55,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index 9fd3953fb4..74d501df38 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -110,7 +110,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 2e28a3934f..d23e4ea156 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -106,7 +106,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>;